CS Paper Radar

From Legs to Wheels: Embodiment-Aware Human Motion Retargeting for Mobile-Base Humanoids

Jiyeon Koo, Eunseom Pyo, Jeonghee Seo, Taehwa Kim, Andrew Jaeyong Choi

cs.RO ·submitted 2026-10-06 14:02 UTC · v1

Abstract

Human video offers a scalable source of robot demonstrations, yet most human-to-humanoid retargeting methods assume a legged robot with human-like kinematics. This assumption does not hold for mobile-base humanoids equipped with a wheeled base, vertical lift, and two arms. Human walking must be expressed through base motion, while torso bending may require coordinated lift and arm motion. We address this mismatch with a task-conditioned framework that assigns reconstructed human motion to base, lift, and arm responsibilities before robot-specific realization. The allocator preserves the human-derived path, stabilizes heading, separates turn and translation when needed, retimes commands to satisfy base limits, and repairs lift and arm trajectories. A deployment adapter then converts the reference to 50 Hz commands using stationary-base detection, deadband and slew-rate filtering, time-consistent playback scaling, and separate linear and angular gains. We evaluate the resulting references with human-derived task-space comparisons, policy-free simulation replay, and a qualitative execution on a physical robot.

Comment
8 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Beyond Human-Derived Motion: Exploring Robot-Specific Execution for Construction Humanoids

cs.RO ·2026-10-16 ·MinJun Chang, Taehyung Kim, Yong K. Cho, Francis Baek
similarity 0.76
Abstract

Construction productivity has remained a per- sistent challenge, motivating growing interest in humanoid robots that can operate in workspaces and with tools designed for human workers. Realizing this potential requires effective motion control, for which human-derived motion transfer has emerged as a promising approach by capturing and retargeting human demonstrations to humanoid robots. While promising, however, human-derived motion transfer may not fully define how a humanoid should ultimately execute the transferred motion. Once task-relevant motion information has been con- veyed, the humanoid may also exploit its own embodiment through motions that depart from the human demonstration. This study examines whether such Robot-Specific Motion offers an advantage in motion execution efficiency over Human- Derived Motion. On an adult-sized Unitree H1-2, Human- Derived Motion was generated through vision-based capture and retargeting, whereas Robot-Specific Motion used inverse kinematics and minimum-jerk transfers to reach the same targets while departing from the demonstrated posture, as verified using Rapid Upper Limb Assessment (RULA). Across a pick-and-stack sequence representing construction material handling, with four matched motion targets and three trials per condition, Robot-Specific Motion achieved 12.87 s versus 25.03 s in execution time, 0.92 m versus 4.33 m in trajectory length, and 58.7 J versus 247.3 J in two-arm mechanical work. These findings suggest that allowing humanoids to depart from demonstrated human motion may offer additional opportunities for more efficient motion execution, while broader construction tasks are needed to determine whether such differences trans- late into productivity gains.

0.09

Morphology-Aware Human Motion Retargeting for Wheeled-Humanoid Loco-Manipulation

cs.RO ·2026-09-10 ·Chenbo Xia, Chao Ye
similarity 0.75
Abstract

Human-to-humanoid retargeting has largely been studied on legged platforms, while comparatively few wheeled-humanoid systems support coupled locomotion and manipulation from general human motion. Building on GMR's configurable general-motion retargeting and BeyondMimic's physically simulated R1 Pro learning framework, we present a reproducible pipeline that converts multi-dataset SMPLX motion into executable loco-manipulation behavior for the Galaxea R1 Pro wheeled humanoid. The robot has a planar three-wheel base, a serial torso, and two arms but no leg joints, so human lower-body motion must be redistributed across base motion and torso posture without sacrificing manipulation-relevant arm geometry. Our pipeline combines canonical body-shape preprocessing, planar-base normalization, morphology-aware differential inverse kinematics, shoulder-rooted hierarchical arm retargeting, and continuous torso substitution for bending and squatting. A reference-twist-driven planning layer then decodes planar base motion into continuous three-wheel steering and rolling commands subject to hysteresis, kinematic continuity, acceleration, and actuator-rate limits. Finally, a 21-dimensional BaseDecode policy is trained in Isaac Lab with directional joint-limit scaling, focused upper-body tracking, and a staged wheel-contact reward. The resulting system provides a complete bridge from human motion data to physically trackable wheeled-humanoid loco-manipulation rather than a visualization-only retargeter; quantitative policy comparisons remain scheduled for a later revision.

0.44

EgoAlign: Bridging the Human-Humanoid Gap for Long-Range Loco-Manipulation

cs.RO ·2026-09-29 ·Yiming Jiang, Jin Chen, Chongyang Xu, Yilun Chen, Aimin Hao +1 more
similarity 0.72
Abstract

Egocentric human demonstrations offer an accessible source of task experience, but differences in body scale and controller response, together with missing robot states, limit their value as humanoid training supervision. We present EgoAlign, a data-construction framework that converts these demonstrations into action and state supervision compatible with a general-purpose, continuous whole-body controller, without collecting physical-robot demonstrations. Using the target-robot model and simulator, EgoAlign guides demonstration collection through execution feedback. It preserves locomotion references for visually guided periodic stepping while adapting upper-body interaction geometry through scale alignment and controller-in-the-loop refinement. A final causal replay reconstructs the corresponding robot states and motion-token labels for training with the human observations. We assess the resulting supervision by fine-tuning a vision--language--action model solely on adapted human demonstrations and deploying it zero-shot on a physical humanoid. The resulting policies perform long-range object relocation, navigation to unseen goal positions, and independently evaluated foot interaction. Refinement improves simulated hand alignment and physical pickup success over kinematic alignment alone, while human collection reduces on-site acquisition time relative to teleoperation. https://lambdahumanoid.github.io/EgoAlign/

0.25

From Tabletop to Walking Bot: Deploying a VLA Model on a Legged Manipulator Robot

cs.RO ·2026-10-23 ·Giovanni Minelli, Antonio Langella, Giovanni B. Dessy, Lorenzo Amatucci, Giulio Turrisi +2 more
similarity 0.72
Abstract

Vision-language-action (VLA) models are typically pretrained on broad, diverse datasets and subsequently fine-tuned on a comparatively small dataset tailored to a specific target robot. Such adaptation recipe is now widely established, achieving its most mature results on fixed-base arms due to their static base dynamics and consistent reference frame. Mounting the same arm on a quadruped extends the workspace to the entire floor, but fundamentally changes the embodiment: rather than controlling the arm in isolation, the policy must jointly coordinate base navigation, body posture, and end-effector motion. In this work, we study the practical demands of this embodiment change across data collection, model adaptation, and inference design to achieve closed-loop loco-manipulation on a Unitree Go2 with an AgileX Piper arm. We report the choices that made this real-robot deployment feasible, namely model variant, action horizon, and demonstration conventions, together with a study tailored to a pick-and-place task, separating data coverage from model capacity. We show that expanding demonstration coverage reduces held-out end-effector error by 30%, and incorporating secondary skills (such as pushing rather than grasping) introduces new behavioral modes without degrading baseline performance. Finally, closed-loop real-world experiments show how dataset composition shapes success and failure, validating the pipeline for more complex loco-manipulation.

0.19

DUET: Decoupled Upper- and Lower-Body Execution for Task-Agnostic Humanoid Loco-Manipulation

cs.RO cs.LG ·2026-09-19 ·Kapalik Khanal, Biswash Khatiwada, Stephen Afrifa, Fan Wu, Ramesh Bahadur Bist
similarity 0.71
Abstract

Changing a humanoid robot's manipulation policy should not require retraining the controller that maintains the robot's balance. This study introduces DUET, a decoupled execution framework that enables locomotion and manipulation controllers to operate simultaneously by combining their commands only at the robot interface. A reinforcement-learning locomotion policy controls the 12 leg joints and a waist yaw joint, tracking planar velocity, turning rate, and pelvis height from deep crouching to upright standing on a 23-degree-of-freedom Unitree G1. The 10 arm joints are excluded from the action space, while their positions and velocities are included only as observations, so that any compatible manipulation policy that generates arm-joint targets can control the upper body, and the locomotion policy keeps the lower body stable without requiring shared training or direct coordination. This study demonstrates the modular approach on hardware by pairing the same locomotion checkpoint with two different vision-language-action models, GR00T N1.7 and pi0.5. In simulation evaluation, the locomotion controller kept the robot's lower body stable with no falls while tracking the commanded planar velocity, yaw rate, and pelvis height with errors of 0.186 m/s, 0.142 rad/s, and 0.016 m, respectively. Ablation studies identify the upper-body pose curriculum as the dominant component, and removing this training step reduces episode survival from 20.0 to 7.4 seconds and increases the fall rate to 6.06 per environment minute. Robustness tests show no falls under pushes of up to 1.0 m/s within the trained payload range, and no falls at twice the payload limit for pushes below 0.7 m/s. These results show that a manipulation policy can be exchanged without retraining, restarting, or otherwise touching the layer that keeps the robot upright.

0.22

KinoGen: Customizable Humanoid Loco-Manipulation References via Kinematically Grounded Video Generation

cs.RO ·2026-10-14 ·Qi Wu, Lulu Zhao, Sanghyun Hahn, Rishi Yennu, Emmy Yang +4 more
similarity 0.71
Abstract

We present KinoGen, a framework that synthesizes customizable humanoid loco-manipulation references through kinematically grounded video generation. KinoGen conditions a pretrained video generator on calibrated renders of the target robot and object in a simulated task instance and recovers the reference by fitting the same models to the generated two-view video, so that the reference lies in the robot configuration space by construction without a human body proxy or retargeting. Body, hand, and object priors initialize the reconstruction, and direct optimization against cross-view evidence refines it. Since an edited keyframe is simply another rendered state, a user can prescribe a goal object pose, regenerate the video around the edited keyframe, and obtain a reference that satisfies the pose exactly. Across eight loco-manipulation tasks, KinoGen yields lower penetration and foot skating than video-based baselines and preserves over 90% of annotated contacts, and its customized references satisfy every prescribed target with substantially less penetration than direct interpolation. Tracking policies trained on the synthesized references are deployed on a Unitree G1 humanoid with dexterous hands. Project webpage: https://kinogen-humanoid.github.io/.

0.22

$λ_0$: Scaling Open-World Egocentric Human Data for Humanoid Loco-Manipulation

cs.RO cs.CV ·2026-10-13 ·Lambda-humanoid Team, :, Chongyang Xu, Jin Chen, Jinhui Ye +12 more
dataset similarity 0.71
Abstract · Tech report, 24 pages

Humanoid loco-manipulation requires coordinated whole-body interaction with the physical world, yet collecting robot demonstrations at scale remains costly. Human demonstrations offer a scalable alternative, but existing egocentric human supervision often omits locomotion and posture, while embodiment differences and controller dynamics hinder accurate end-effector execution. We introduce HumanVerse, a 500-hour dataset of open-world human loco-manipulation pairing egocentric video with synchronized body and hand motion. Our human-to-humanoid pipeline aligns camera viewpoints and arm appearance, and refines motion references and controller inputs offline to reduce end-effector errors while preserving whole-body coordination. We validate the pipeline through zero-shot transfer to Unitree G1 on representative whole-body manipulation and long-range loco-manipulation tasks, without target-task robot demonstrations. Building on this pipeline, we develop $λ_0$, a humanoid foundation model for whole-body loco-manipulation, with robot-aligned human demonstrations providing supervision for mid-training. Increasing whole-body human data consistently improves downstream task progress. $λ_0$ achieves 90.0% success on SIMPLE and 62.5% across real-world loco-manipulation tasks. We expect this study to guide scalable whole-body human data collection toward humanoid foundation models for richer interaction with the physical world. Homepage: https://lambdahumanoid.github.io/

0.33

Anchor 1: Precise and Stable Humanoid Control for Whole-Body Manipulation

cs.RO ·2026-10-30 ·Archon Robotics, :, Caojun Wang, Checheng Yu, Gangcheng Jiang +22 more
benchmark similarity 0.70
Abstract

Humanoid controllers have acquired increasingly diverse motor skills, yet translating these capabilities into precise and stable whole-body manipulation remains challenging. Manipulation tasks are sensitive to execution deviations -- even small errors or unintended steps can cause failure. Introducing Anchor 1, a whole-body controller for precise and stable whole-body manipulation, together with a benchmark spanning diverse coordination demands. Anchor 1 adopts calibrated sparse motion references to preserve task-relevant human motion structure without online joint-space retargeting, leaving kinematic freedom for precise control. To guide this freedom towards stable, physically plausible whole-body coordination, we shape the training distribution through offline curation of robot motions paired with these calibrated sparse references. We further introduce explicit error feedback decoupled from motion encoding, improving control precision while supporting flexible command interfaces. To achieve a systematic evaluation of these capabilities, a benchmark is proposed to assess precision, sustained execution stability, and reachability across diverse whole-body coordination demands. Evaluations in simulation and on hardware show stronger precision and stability across all evaluation tracks. Under the most strict real-world global scoring setting, Anchor 1 achieves a 30\% to 80\% decrease in tracking error with fewer look-ahead inputs, and without retargeting compared to all existing controllers. Downstream experiments demonstrate more efficient teleoperated data collection and higher task success using the same deployment pipeline as well. We believe Anchor 1 supports precise and stable whole-body control as a practical basis for humanoid task execution.

0.18