CS Paper Radar

Humanoid SRL: Augmenting Humanoids with Supernumerary Limbs for Coordinated Loco-Manipulation

Fukang Liu, Feiyang Wu, Paul Barsa, Jaehwi Jang, Akshat Jain, Zhigen Zhao, Yipu Chen, Zhaoyuan Gu, Nikhil Vemuri, Anshul Chandaliya, Kaijie Zhu, Sean Lublinsky, Matthew Zhu, Tony G. Chen, Ye Zhao

cs.RO ·submitted 2026-10-19 01:08 UTC · v1

Abstract

Humanoid robots are envisioned to perform diverse human-level tasks through their anthropomorphic morphology. Their dual-arm configuration enables a broad range of everyday actions. Yet, as in humans, this morphology can constrain loco-manipulation when both arms are occupied or additional contacts are required beyond their reach. Supernumerary robotic limbs (SRLs) offer a way to extend these capabilities, but their integration requires the added limb to be coordinated with whole-body motion and balance. In this study, we develop and integrate a supernumerary arm into a humanoid platform to investigate how morphological augmentation reshapes its feasible action space. Through quantitative analysis and hardware experiments across two configurations, we show how the additional limb expands whole-body interaction capabilities by enabling manipulation and support to be coordinated beyond the constraints of the native dual-arm configuration. To control this augmented morphology, we leverage model-based trajectory optimization (TO) to generate dynamically feasible motions for goal-conditioned reinforcement learning (RL) controllers. The controllers are trained in simulation and transferred to hardware in a zero-shot manner, enabling coordinated whole-body skills for contact-rich tri-arm loco-manipulation. We further show vision-guided autonomous execution on selected tasks using diffusion policies trained from hardware demonstrations. Our findings suggest that humanoid morphology need not be restricted to human-like forms, but can be reimagined as an extensible design space for robotic augmentation.

Closest papers

Nearest neighbours by meaning across the whole index.

Whole-Body Dexterity

cs.RO cs.AIcs.LGeess.SY ·2026-10-15 ·Conor Mc Gartoll, An Dang, Pranay Thangeda, Arjun Gupta, Carolina Higuera +3 more
similarity 0.74
Abstract · 20 pages, 13 figures

Current humanoid dexterous manipulation remains largely confined to end-effectors and simple grasps, falling short of humans' ability to engage the entire body by bracing and sliding bulky objects against the arms and torso. We introduce Whole-Body Dexterity (WBD), a general framework that uses the robot's body and appendages as contact surfaces to grasp and manipulate objects. Our sim-to-real pipeline first generates a dataset of feasible whole-body grasps, then trains reinforcement-learning experts on a general any-to-any repositioning objective by sampling initial and goal grasps from the dataset, and distills these experts into a single policy that uses proprioception and object geometry. We show that the distilled policy transfers zero-shot to a real Unitree G1, where it repositions a basketball and a cardboard box to regions around the torso and completes a long-horizon task that stows a box under one arm, carries it from a shelf to a table, and places it. The controller operates interactively, steered by coarse motion references from a human teleoperator. Across real-world whole-body manipulation tasks, the distilled controller completes 90% of trials, compared with 18% for direct retargeting and 4% for a generalist whole-body controller.

0.38

Anchor 1: Precise and Stable Humanoid Control for Whole-Body Manipulation

cs.RO ·2026-10-30 ·Archon Robotics, :, Caojun Wang, Checheng Yu, Gangcheng Jiang +22 more
benchmark similarity 0.73
Abstract

Humanoid controllers have acquired increasingly diverse motor skills, yet translating these capabilities into precise and stable whole-body manipulation remains challenging. Manipulation tasks are sensitive to execution deviations -- even small errors or unintended steps can cause failure. Introducing Anchor 1, a whole-body controller for precise and stable whole-body manipulation, together with a benchmark spanning diverse coordination demands. Anchor 1 adopts calibrated sparse motion references to preserve task-relevant human motion structure without online joint-space retargeting, leaving kinematic freedom for precise control. To guide this freedom towards stable, physically plausible whole-body coordination, we shape the training distribution through offline curation of robot motions paired with these calibrated sparse references. We further introduce explicit error feedback decoupled from motion encoding, improving control precision while supporting flexible command interfaces. To achieve a systematic evaluation of these capabilities, a benchmark is proposed to assess precision, sustained execution stability, and reachability across diverse whole-body coordination demands. Evaluations in simulation and on hardware show stronger precision and stability across all evaluation tracks. Under the most strict real-world global scoring setting, Anchor 1 achieves a 30\% to 80\% decrease in tracking error with fewer look-ahead inputs, and without retargeting compared to all existing controllers. Downstream experiments demonstrate more efficient teleoperated data collection and higher task success using the same deployment pipeline as well. We believe Anchor 1 supports precise and stable whole-body control as a practical basis for humanoid task execution.

0.18

OmniInteract: Towards Unified Whole-Body Interaction Control for Dual Humanoids

cs.RO ·2026-10-19 ·Yinghao Li, Tianyu Zhang, Zhuohao Li, Yi-Lin Wei, Fa-Ting Hong +2 more
code/data similarity 0.73
Abstract · 30 pages including appendix, 11 figures. Project page: https://calvinyhli.github.io/omniinteract.github.io/

Physical interaction is a key capability for humanoid collaboration, requiring coordinated whole-body motion and precise contact. However, learning diverse dual-humanoid interactions faces two major challenges: (1) human-robot morphological differences disrupt contact interfaces and spatial relationships during retargeting, and (2) jointly learning motor skills and partner coordination makes it difficult to retain control fidelity as interaction diversity grows. In this paper, we propose OmniInteract to address these challenges through surface-aware modeling and scalable residual policy learning. First, we introduce Surface Contact-Aware Retargeting, which leverages dense human-robot surface correspondences to jointly retarget both humanoids, preserving explicit interaction contact interfaces and their near-field geometric context. Second, we propose a Scalable Flow-based Interaction Policy for partner-conditioned residual generation. It factorizes dual-humanoid control into a reusable motor foundation and interaction-specific adaptations: partner-aware experts learn corrections over a frozen whole-body motion prior, while conditional flow matching unifies them in a shared residual action space. This enables scalable skill consolidation while retaining pretrained motor capabilities. Extensive experiments demonstrate that OmniInteract improves retargeting fidelity and dual-humanoid coordination while better retaining interaction performance as skill diversity grows. Real-world deployment further demonstrates successful contact establishment, stable whole-body coordination, and recovery from external perturbations.

0.25

DUET: Decoupled Upper- and Lower-Body Execution for Task-Agnostic Humanoid Loco-Manipulation

cs.RO cs.LG ·2026-09-19 ·Kapalik Khanal, Biswash Khatiwada, Stephen Afrifa, Fan Wu, Ramesh Bahadur Bist
similarity 0.73
Abstract

Changing a humanoid robot's manipulation policy should not require retraining the controller that maintains the robot's balance. This study introduces DUET, a decoupled execution framework that enables locomotion and manipulation controllers to operate simultaneously by combining their commands only at the robot interface. A reinforcement-learning locomotion policy controls the 12 leg joints and a waist yaw joint, tracking planar velocity, turning rate, and pelvis height from deep crouching to upright standing on a 23-degree-of-freedom Unitree G1. The 10 arm joints are excluded from the action space, while their positions and velocities are included only as observations, so that any compatible manipulation policy that generates arm-joint targets can control the upper body, and the locomotion policy keeps the lower body stable without requiring shared training or direct coordination. This study demonstrates the modular approach on hardware by pairing the same locomotion checkpoint with two different vision-language-action models, GR00T N1.7 and pi0.5. In simulation evaluation, the locomotion controller kept the robot's lower body stable with no falls while tracking the commanded planar velocity, yaw rate, and pelvis height with errors of 0.186 m/s, 0.142 rad/s, and 0.016 m, respectively. Ablation studies identify the upper-body pose curriculum as the dominant component, and removing this training step reduces episode survival from 20.0 to 7.4 seconds and increases the fall rate to 6.06 per environment minute. Robustness tests show no falls under pushes of up to 1.0 m/s within the trained payload range, and no falls at twice the payload limit for pushes below 0.7 m/s. These results show that a manipulation policy can be exchanged without retraining, restarting, or otherwise touching the layer that keeps the robot upright.

0.22

Morphology-Aware Human Motion Retargeting for Wheeled-Humanoid Loco-Manipulation

cs.RO ·2026-09-10 ·Chenbo Xia, Chao Ye
similarity 0.72
Abstract

Human-to-humanoid retargeting has largely been studied on legged platforms, while comparatively few wheeled-humanoid systems support coupled locomotion and manipulation from general human motion. Building on GMR's configurable general-motion retargeting and BeyondMimic's physically simulated R1 Pro learning framework, we present a reproducible pipeline that converts multi-dataset SMPLX motion into executable loco-manipulation behavior for the Galaxea R1 Pro wheeled humanoid. The robot has a planar three-wheel base, a serial torso, and two arms but no leg joints, so human lower-body motion must be redistributed across base motion and torso posture without sacrificing manipulation-relevant arm geometry. Our pipeline combines canonical body-shape preprocessing, planar-base normalization, morphology-aware differential inverse kinematics, shoulder-rooted hierarchical arm retargeting, and continuous torso substitution for bending and squatting. A reference-twist-driven planning layer then decodes planar base motion into continuous three-wheel steering and rolling commands subject to hysteresis, kinematic continuity, acceleration, and actuator-rate limits. Finally, a 21-dimensional BaseDecode policy is trained in Isaac Lab with directional joint-limit scaling, focused upper-body tracking, and a staged wheel-contact reward. The resulting system provides a complete bridge from human motion data to physically trackable wheeled-humanoid loco-manipulation rather than a visualization-only retargeter; quantitative policy comparisons remain scheduled for a later revision.

0.44

OIL: An Object Interaction Layer for Humanoid Whole-Body Control

cs.RO ·2026-10-01 ·Pranay Dugar, Mohitvishnu S. Gadde, Rajesh Mangannavar, Aayam Kumar Shrestha, Alan Fern
published similarity 0.72
Abstract

Recent progress in learned whole-body controllers for humanoid robots has enabled robust free-space motion by tracking kinematic targets such as joint or end-effector trajectories. This interface provides a useful abstraction for upstream systems, including motion capture, teleoperation, or generative models, which can specify desired motion without reasoning about forces or balance. However, this abstraction has largely been limited to robot motion, requiring task-specific controllers or retraining for object interaction. We introduce OIL, an Object Interaction Layer that extends the kinematic command interface of whole-body control to include desired object motion and contact. OIL augments a standard controller with object-centric commands and translates them into coordinated whole-body behavior while preserving locomotion and balance. This design enables a single learned policy to execute non-prehensile interactions, including pushing, pulling, two-arm pick-and-place, and locomotion-coupled transport, directly from object-level kinematic targets without task-specific retraining. In simulation, we demonstrate that object-level commands improve performance over robot-centric controllers while matching task-specific policies across variations in object properties such as mass and size. We further demonstrate zero-shot generalization to novel behavior combinations and sim-to-real transfer on the Digit humanoid robot.

0.26

Learning Holistic Whole-Body Loco-Manipulation with a Bipedal Mobile Manipulator

cs.RO ·2026-09-16 ·Zhongyu Chen, Yuxuan Nai, Qian Chen, Yidong Zhu, Chen Jing +6 more
similarity 0.72
Abstract

Bipedal loco-manipulation enables robots to interact with objects beyond the nominal workspace of their arms by coordinating locomotion and manipulation. Realizing this capability requires a low-level whole-body controller that translates task-level manipulation goals into coordinated arm and leg motions while maintaining balance. We present a unified whole-body controller trained with reinforcement learning that directly maps 6-DoF end-effector targets to coordinated actions for the bipedal base and robotic arm. Given only an end-effector target, the learned controller autonomously coordinates reaching, postural adaptation, and stepping without explicit base-velocity or footstep commands. A reward-gating strategy regulates the trade-offs among end-effector tracking, locomotion, and balance during training, while a temporal context estimator combines windowed Transformer encoding, recurrent GRU memory, and auxiliary dynamics prediction to extract dynamics-relevant information from observation history. Real-robot experiments demonstrate that the same controller supports reaching, postural adaptation, and stepping under commands from VR teleoperation, a learned diffusion policy, and scripted trajectories, providing a common end-effector interface for diverse manipulation tasks.

0.21

BRIDGE: An Open-Source Humanoid Platform via Morphology-Control Co-Design for Physical AI

cs.RO cs.AI ·2026-09-03 ·Jianren Wang, Letian Qian, Zikai Wang, Weiwei Wu, Junjie Zong +2 more
code/data similarity 0.72
Abstract

Developing humanoid robots capable of leveraging human behavioral data is essential for general-purpose embodiment, yet conventional development remains bottlenecked by a decoupled paradigm that isolates hardware design from whole-body control. This approach leads to suboptimal systems that compromise human-like fluidity and agility. To bridge this gap, we introduce a data-driven morphology-control co-design framework that optimizes humanoid morphology for human-like movement. To quantify morphological fidelity, we also introduce a novel metric that jointly considers kinematic retargeting fidelity to human motion and dynamic tracking performance. Our framework achieves state-of-the-art (SOTA) performance across all metrics compared to baseline humanoids (Bumi, K1, and Toddlerbot). Finally, we realize this design in Bridge, an open-source, 88cm-tall humanoid platform released alongside its control policy. We demonstrate that Bridge captures human motion data with superior fidelity, exhibiting exceptional performance across foundational locomotion, robust balance, and highly dynamic maneuvers. Videos and open-source materials: https://sites.google.com/view/bridgerobot.

0.46