CS Paper Radar

Making Waves: A Membrane-Coupled Delta Array for Manipulating Objects Below the Actuator Spacing

Bailey Dacre, Andrés Faíña, Oliver Kroemer, Zeynep Temel

cs.RO ·submitted 2026-09-30 12:55 UTC · v1
theory

Abstract

Distributed manipulator systems manipulate objects through the coordinated motion of many actuators. However, an object must be supported by several actuators at once, so the centre-to-centre actuator spacing imposes a hard lower bound on manipulable object size. We remove this bound by coupling the end-effectors of an 8 x 8 array of three degrees-of-freedom delta robots with a stretchable fabric, turning 64 discrete contacts into a continuous surface capable of manipulating objects smaller than the actuator spacing. Viewing the array as a displacement field over that surface, we investigate local quasi-static and cyclic fields as manipulation primitives. These primitives can be applied globally across the array or locally confined around each tracked object to independently manipulate several objects in parallel. We then train a policy acting on low-order discrete cosine transform coefficients: at equal action dimension, commanding a nineteen-delta neighbourhood halves the placement error of commanding the whole array. The policy transfers to hardware without adaptation at 76% success. The platform manipulates objects from 15mm-90mm, a six-fold range spanning both sides of the actuator spacing, 43.3mm, on a single surface.

Closest papers

Nearest neighbours by meaning across the whole index.

Tensegrity Continuum Robots Enable Task-Adaptive Morphologies for Cooperative Behaviors

cs.RO ·2026-08-27 ·Mahmud Hasan Saikot, Sydney Spiegel, Sudheera Akalanka Kariyawasam, Andrew Stefka, Josh Chrisler +1 more
top venue similarity 0.60
Abstract · 22 pages, 6 figures, Accepted to Nature Machine Intelligence

Robots that can change their morphologies and behaviors for different tasks and environments hold great promise for adaptable, multifunctional systems. Modular reconfigurable robots (MRRs) can achieve such functionalities by docking and rearranging individual units, but most rely on rigid modules that lack structural compliance, resulting in limited capabilities. Continuum robots offer compliance through flexible backbones, yet they cannot self-reconfigure into task-adaptive multi-robot configurations. Here, we introduce an MRR that unifies the advantages of both architectures by combining a tensegrity-based compliant body with claw-based connection mechanisms. Each robot can manipulate and locomote independently, and multiple robots can self-reconfigure into different morphologies (e.g., chains, loops, branches) for cooperative manipulation and locomotion. We demonstrate the robots' capability across diverse tasks and environments, including coordinated object manipulation and transport, multimodal locomotion, and loco-manipulation in real-world scenarios. These results lay a foundation for adaptable and multifunctional robotic collectives, with broad potential applications in manufacturing, space exploration, and search-and-rescue operations.

0.33

Robotic Budding: From Homogeneous Cells to Diverse Morphologies in Physical Self-Reproduction

cs.RO ·2026-10-22 ·Siyuan Zhang, Junyan Liu, Wanglin He, Hod Lipson
similarity 0.58
Abstract

Physical self-reproduction in modular robots remains difficult because a robot must not only move, but also collect, align, dock, and separate modules reliably in hardware. Taking inspiration from how genetically identical cells form the varied tissues of an organism, we introduce a single standardized robotic module that combines a magnetic docking interface with two actuated joints and folds from a flat, two-dimensional configuration into three-dimensional structures. Modules of this single design can be assembled into two morphologies: a three-module "trilobite" and a five-module "seal". Using a small set of discrete motion commands, a human operator steers an assembled parent robot to dock magnetically with a sequence of spare modules, which are assembled into a second, structurally identical individual that then separates from the parent. Because the parent retains all of its original modules, this is a budding-style form of physical reproduction. Here, we report preliminary hardware demonstrations of this full process on both morphologies. We discuss the current scope of the system, including its present reliance on direct human teleoperation rather than autonomous control, and outline directions toward autonomous execution of this process and repeated validation across a larger number of independent trials.

0.17

Recompositional Robotics: Cross-Domain, Open-set, and Lifelong Modularity Beyond Morphology

cs.RO ·2026-09-29 ·Steven Swanbeck, Jonathan Salfity, Corrie Van Sice, Robert Blake Anderson, Mitch Pryor
published similarity 0.57
Abstract · 2026 IEEE/RSJ IROS Workshop on Reconfigurable Modular Robots

Research in modular robotics has produced capable approaches allowing a robot's morphology to change online, with recent efforts also developing approaches to decide which morphology to assume and automatically propagate that decision into the robot's motion planning and control. These approaches are powerful and increase adaptability in the field. However, an alternative objective is not to build robots whose structures can change, but robots whose fundamental capabilities can change, where capability is a joint function across several domains, including kino-dynamics, perception, compute, and high-level coordinating behaviors. A robot designed to be reconfigured across these domains has a greater capacity to alter its capability than one that can be reconfigured in a single domain. We refer to this cross-domain reconfigurability as integration span, and recognize a complementary measure of the resistance to reconfiguration, which we refer to as integration inertia. Current modular robots have reduced integration inertia in the structural domain while it remains high in the other domains that contribute to integration span. We assert that the systems that can provide the most utility through reconfiguration in practice are those maximizing span and minimizing inertia and call this general problem recompositional robotics: adaptation over a heterogeneous set of modules including hardware, software, compute, and behavior that abstracts each component by the interfaces it requires and provides such that they can be reasoned over holistically. We define the problem, ground it in two deployed systems and active research efforts, and pose open questions about the future of recompositional robotics.

0.28

Suspended-Fabric Robotic Manipulation Surfaces: Modelling, Design Space, and Multimodular Extensio

cs.RO ·2026-10-30 ·Pratik Ingle, Jørn Lambertsen, Kasper Støy, Andres Faiña
similarity 0.57
Abstract

Robotic Manipulation Surfaces (RMS) reposition objects by deforming the surface on which they rest. A recent class of RMS suspends a continuous fabric sheet from a sparse grid of vertical linear actuators lowering the actuator density of such surfaces but how to design such surfaces so that objects can be controlled everywhere on it, and how to extend it beyond a single module so that objects can pass between modules and achieve parallel, remain open. This paper presents a separable catenary model of the suspended sheet that is fast to compute and provides both the surface shape for given actuator heights and the actuator heights for a desired local slope. The closed form inverse lets a simple PID controller position objects on the sheet, and the model relates fabric length, module span and actuator stroke to the reachable workspace, yielding a minimum fabric length bound and design charts for these surfaces. The approach is then extended to a multimodular platform in which neighbouring modules share actuators. On a $2 \times 2$ prototype, we demonstrate that centimetre-scale objects are transferred between modules and positioned within 0.03 m over a $1 m^2$ workspace with only nine actuators, enabling multi-object manipulation and opening the way to parallel manipulation.

0.21

Distributed Dexterous Manipulation with Spatially Conditioned Multi-Agent Transformers

cs.RO cs.LG ·2026-09-07 ·Sarvesh Patil
similarity 0.57
Abstract

Distributed Dexterous Manipulation (DDM) is a novel paradigm that presents significant control challenges due to high action-space redundancy, inter-robot cooperation, and dynamic object-robot interactions. This paper introduces a framework based on spatially conditioned Multi-Agent Transformers (MATs) to efficiently learn robust control policies for a DDM system grounded in an array of 64 soft delta robots arranged in an 8x8 grid. Our three core contributions are: (i) an MAT with adaptive layer norm for compute efficiency, (ii) spatial contrastive embeddings to ground transformer embeddings in the spatial configuration of the robots, and (iii) an MAT-based behavior cloning method fine-tuned using Soft Actor Critic. We also propose an action selection formulation to analyze the trade-off between task performance and the number of robots utilized. Our experiments show that MATs iteratively refine their actions through the stacked attention blocks. This further informs the benefit of spatial conditioning in transformers to learn DDM policies. We demonstrate long-horizon planar manipulation tasks with objects of various geometries in simulation and real-world. Finally, we show how action selection mitigates robot maintenance by reducing wear and tear due to inter-robot collisions while maintaining the ability to manipulate objects along various trajectories in the real-world, achieving an average error of ~1.5 cm, while using ~65% fewer robots.

0.21

Design and Characterization of a Unified Continuum Robot Actuation Platform

cs.RO ·2026-10-14 ·Yunti Xu, Aedan Mangan, Miheer Potdar, Alex Lu, Tania K. Morimoto
similarity 0.57
Abstract

Continuum robots enable dexterous access to confined spaces in applications such as minimally invasive surgery and industrial inspection. However, their actuation systems are often custom-designed for specific robot architectures and tasks, limiting reuse across publications, institutions, and applications. This paper presents a unified actuation platform that decouples actuation hardware and software from continuum robot design. The platform provides modular actuation across continuum robot classes, scales to a large number of degrees of freedom (DOFs), and integrates with conventional serial manipulators for hybrid architectures. We validate the platform on an open-sourced surgical robotic system and experimentally characterize the actuation modules, achieving sub-millimeter translational accuracy and less than $5^\circ$ rotational error over ranges of $30$~mm and $180^\circ$, respectively. We further demonstrate the platform in two surgical use cases: teleoperation of a continuum camera in a constrained environment and bimanual manipulation using $2.53$~mm concentric-tube-robot-based forceps alongside a conventional wristed instrument. All hardware designs and ROS-based software are open-sourced to facilitate reuse and further research in continuum and surgical robotics.

0.31

TCAM for Autonomous Deformable Manipulation: The RMC2 Champion System for WBCD 2026 Track 4

cs.RO ·2026-08-11 ·Guangrui Shen, Zhili He, Shigang Wang, Yuanjun Sun, Qing Yu
similarity 0.56
Abstract

This technical report describes the RMC2 Team's champion solution for the WBCD 2026 Track 4: Deformable Manipulation Challenge. The task requires a robot to pick a single T-shirt from a stack, load it onto a printing pallet, align the collar with a target area, and smooth the printing region, a sequence that involves single-layer separation, deformable transport, precise placement, and contact-rich surface adjustment. The competition strongly incentivizes fully autonomous execution, motivating the development of an autonomous solution. We built a fully autonomous system around the TCAM (TermiBrain Causal Action Model) framework, with the design principle that hardware, perception, data, and learning should jointly reduce the physical interaction complexity the policy must handle. A custom 3D-printed gripper designed for single-layer fabric separation improves picking reliability on a dual-arm ARX X5 platform. A wrist-centric four-camera setup pairs upper fisheye cameras for task-level context with lower RGB cameras for close-range gripper-cloth contact observation. We combine portable UMI-style demonstrations with real-robot demonstrations collected on the deployable platform to provide both broad manipulation priors and deployment-specific dynamics. TCAM ties these components into a closed loop: each trajectory is analyzed to identify the physical factors contributing to its outcome, driving targeted data recollection and policy fine-tuning. The policy outputs 30-step end-effector delta-pose action chunks from a multi-view VLA backbone. In the final competition, our system loaded 25 T-shirts at an average of approximately 23 seconds per attempt, with 22 achieving the required surface smoothness, securing first place in Track 4.

0.04

One Demonstration, Many Objects: Generalizing Manipulation via Local Contact Geometry

cs.RO ·2026-09-01 ·Satvik Sharma, Samrat Sahoo, Huang Huang, Fei-Fei Li, Jiajun Wu +2 more
highly cited similarity 0.56
Abstract

Dexterous manipulation with multi-fingered robot hands promises human-level dexterity, but collecting large-scale dexterous robot hand data remains difficult. Learning from human demonstrations has emerged as a scalable alternative to robot teleoperation, providing strong priors on object interaction and contact strategies. Recent sim-to-real RL methods incorporate such priors, but often (i) omit rewards that explicitly incentivize precise contact, yielding weak real-world performance, and/or (ii) generalize poorly to unseen object instances. We propose DemoMimic (Dexterous Motion Mimic), a policy that manipulates objects by focusing on their geometry local to the contact points. Its contact-centric rewards encourage precise contact and improve sim-to-real consistency, yielding a single real-world policy that transfers across objects of varying shape, scale, mass, and friction wherever local contact structure is preserved. Real-world ablations show that DemoMimic achieves 71% success across 16 objects, four tasks, and two robot-hand embodiments, with the smallest sim-to-real drop compared to baselines.

0.37