CS Paper Radar

Recompositional Robotics: Cross-Domain, Open-set, and Lifelong Modularity Beyond Morphology

Steven Swanbeck, Jonathan Salfity, Corrie Van Sice, Robert Blake Anderson, Mitch Pryor

cs.RO ·submitted 2026-09-29 14:54 UTC · v1
published

Abstract

Research in modular robotics has produced capable approaches allowing a robot's morphology to change online, with recent efforts also developing approaches to decide which morphology to assume and automatically propagate that decision into the robot's motion planning and control. These approaches are powerful and increase adaptability in the field. However, an alternative objective is not to build robots whose structures can change, but robots whose fundamental capabilities can change, where capability is a joint function across several domains, including kino-dynamics, perception, compute, and high-level coordinating behaviors. A robot designed to be reconfigured across these domains has a greater capacity to alter its capability than one that can be reconfigured in a single domain. We refer to this cross-domain reconfigurability as integration span, and recognize a complementary measure of the resistance to reconfiguration, which we refer to as integration inertia. Current modular robots have reduced integration inertia in the structural domain while it remains high in the other domains that contribute to integration span. We assert that the systems that can provide the most utility through reconfiguration in practice are those maximizing span and minimizing inertia and call this general problem recompositional robotics: adaptation over a heterogeneous set of modules including hardware, software, compute, and behavior that abstracts each component by the interfaces it requires and provides such that they can be reasoned over holistically. We define the problem, ground it in two deployed systems and active research efforts, and pose open questions about the future of recompositional robotics.

Comment
2026 IEEE/RSJ IROS Workshop on Reconfigurable Modular Robots

Closest papers

Nearest neighbours by meaning across the whole index.

Tensegrity Continuum Robots Enable Task-Adaptive Morphologies for Cooperative Behaviors

cs.RO ·2026-08-27 ·Mahmud Hasan Saikot, Sydney Spiegel, Sudheera Akalanka Kariyawasam, Andrew Stefka, Josh Chrisler +1 more
top venue similarity 0.68
Abstract · 22 pages, 6 figures, Accepted to Nature Machine Intelligence

Robots that can change their morphologies and behaviors for different tasks and environments hold great promise for adaptable, multifunctional systems. Modular reconfigurable robots (MRRs) can achieve such functionalities by docking and rearranging individual units, but most rely on rigid modules that lack structural compliance, resulting in limited capabilities. Continuum robots offer compliance through flexible backbones, yet they cannot self-reconfigure into task-adaptive multi-robot configurations. Here, we introduce an MRR that unifies the advantages of both architectures by combining a tensegrity-based compliant body with claw-based connection mechanisms. Each robot can manipulate and locomote independently, and multiple robots can self-reconfigure into different morphologies (e.g., chains, loops, branches) for cooperative manipulation and locomotion. We demonstrate the robots' capability across diverse tasks and environments, including coordinated object manipulation and transport, multimodal locomotion, and loco-manipulation in real-world scenarios. These results lay a foundation for adaptable and multifunctional robotic collectives, with broad potential applications in manufacturing, space exploration, and search-and-rescue operations.

0.34

Reconfiguration-Complete Motion Primitives with Constructive Planning for Deformable Planar Modular Robots

cs.RO ·2026-08-18 ·Jie Gu, Tingting Wang, Hongrun Gao, Yirun Sun, Zhihao Xia +2 more
theory similarity 0.67
Abstract · Jie Gu and Tingting Wang contributed equally to this work

The continuously deformable geometry of modular robots makes it difficult to define a fixed representation for reconfiguration planning and analysis. This letter introduces a square-cell abstraction that maps deformable rhombus modules to fixed-size grid cells while retaining physically interpretable local motions through two primitives, pivoting and shearing. Under this abstraction, we prove that every non-straight edge-connected configuration with $N \geq 7$ can be transformed to a fixed canonical staircase using only admissible primitive motions. Since these motions are reversible, any two configurations in this class are mutually reconfigurable. The proof is constructive and directly yields a staircase-canonicalization planner that transports removable boundary modules while preserving connectivity. As a practical enhancement, we further introduce a boundary-to-delivery lookahead selector that ranks admissible high level choices without affecting the completeness guarantee. Experiments demonstrate the constructive reconfiguration process and show that the selector substantially reduces planning time, while reference comparisons indicate lower planning times than the prior framework over the shared module counts.

0.24

PolyMorph: Learning Locomotion Policy for Cross-Embodiment Adaptation

cs.RO ·2026-10-14 ·Hyunsik Oh, Seunghun Jeon, Donghoon Youm, Jungwoo Hur, Hyeongjun Kim +3 more
top venue similarity 0.65
Abstract

Reinforcement learning has enabled robust locomotion for legged robots, but learned policies are typically tied to a specific robot morphology and require additional engineering when the number of legs, actuators, or mechanical properties change. We present PolyMorph, a morphology-conditioned framework that learns a single locomotion policy for heterogeneous legged robots. PolyMorph converts each robot's URDF into joint-link modules and combines a recurrent encoder, graph-based Transformer, and per-joint decoder to generate actions across variable leg counts and joint configurations. To improve training stability, PolyMorph uses morphology-normalized rewards, adaptive robot sampling, and URDF-derived PD-gain initialization. We evaluate PolyMorph in simulation across bipedal, tripedal, and quadrupedal robots, including unseen morphology variants and platforms, and deploy the policy on real quadruped platforms operated in multiple configurations. The results show that a single PolyMorph policy generalizes across diverse robot morphologies without per-robot policy retraining.

0.38

Robot Tool Design from Scratch via Behavior-Aware Hierarchical Optimization

cs.RO ·2026-09-28 ·Yinghan Chen, Xiyao Tian, Yizan Dai, Yuyang Li, Yixin Zhu
similarity 0.65
Abstract

The ability to design a tool for a task marks a level of intelligence beyond merely understanding, selecting, or using one. Existing methods for robotic tool design typically optimize a tool's continuous shape and action within a structure that is prescribed or generated beforehand, so the structure itself stays outside the physical optimization loop. We study task-driven tool design from scratch, where tool structure, shape, and action are all derived from the desired physical outcome. Here we show that the three elements can be designed jointly by HOT, a hierarchical optimization whose upper level searches over discrete tool structures with BASS, while lower-level physical optimization evaluates their task behavior and returns milestone progress as behavioral evidence for the search, ultimately providing jointly optimized shape and action. On four tool-use tasks with distinct physical functions, HOT discovers functional structures after evaluating only a small fraction of search spaces containing up to 56 million structures, and the subsequent refinement of their geometry lowers the task loss on all tasks while preserving success, through deformations that are functionally interpretable. Once 3D printed, the tools accomplish all tasks on a real robot with the actions found in simulation. Designing tools from required physical effects, rather than a catalog of known tools, is a step toward the open-ended tool making seen in humans and animals.

0.23

GeoTrussRover: Morphological Computation with Contact-Semantic Control Primitives

cs.RO cs.GRcs.NEeess.SY ·2026-09-10 ·Muyuan Ma, Yi Zhang, Yang Yang, Xuanyan Zheng, Ruiqi Hu +10 more
similarity 0.64
Abstract

Reconfigurable robots can change their contact geometry when a fixed body cannot negotiate an obstacle. A variable-geometry truss (VGT) distributes this shape change through a load-bearing structure, but coupling it to a mobile base creates a high-dimensional coordination problem. GeoTrussRover combines an electrically actuated VGT, a wheeled base, and contact-semantic morphology planning and control. We solve one source traversal and extract four contact-semantic primitives that describe coordination among 21 members. Physics-constrained projection adapts them to unseen step heights with the same contact topology. When every phase remains feasible, adaptation does not recompute the complete motion. If one phase violates the new physical constraints, only that phase is recomputed. A full-space QP then tracks the adapted motion and corrects member and wheel errors. For transfer from 0.10m to 0.075m, the method reduces objective-function evaluations by 63.7% relative to full recomputation. Contact-phase feasibility analysis covers step heights from 0.10 to 0.46m, or 1.08 to 4.97 wheel radii, with the upper value near the theoretical feasible boundary. The electric prototype traverses 2.11 wheel radii. The resulting low-dimensional representation stores task coordination in a hyper-redundant, load-bearing morphology and reuses it during locomotion.

0.30

ThinkLocoManip: A Whole-Body Control Agentic Harness for Legged Loco-Manipulation

cs.RO ·2026-10-25 ·Nuo Chen, Shizeng Zhang, Yujie Yang, Jinghong Wang, Zhenyang Qu +8 more
similarity 0.64
Abstract

In this paper, we propose ThinkLocoManip, an agentic harness for legged loco-manipulation designed to tackle complex, long-horizon tasks in large-scale environments. Existing approaches typically follow either direct action generation or a plan-then-act paradigm, both of which can struggle with the generalization and error-recovery capabilities required for extended task execution. In contrast, ThinkLocoManip adopts an interleaved reasoning-and-acting paradigm, allowing the agent to continuously reason about its current state, execute actions, observe their outcomes, and adapt its strategy accordingly. Building on this paradigm, our agentic harness orchestrates a suite of specialized tools for perception, navigation, manipulation, and locomotion, enabling flexible composition of heterogeneous capabilities. Unlike existing robotic agentic harnesses, ThinkLocoManip explicitly incorporates locomotion as a tool domain for agent reasoning and execution. We further design a set of skills that explicitly account for both tool usage within each functional domain and coordination across domains, supporting effective execution of complex behaviors over long horizons. To tackle task failure during long-horizon interactions, we develop keyframe thinking mechanism to preserve critical execution context and support efficient error recovery. Extensive real-world experiments demonstrate that ThinkLocoManip substantially outperforms representative methods based on both direct action generation and plan-then-act paradigms across challenging long-horizon legged loco-manipulation tasks. Notably, ThinkLocoManip achieves a success rate of 77%, more than twice that of the strongest plan-then-act baseline (37.1%). Our experiments further validate the effectiveness of interleaved reasoning and acting, tool orchestration, and coordinated skill execution.

0.15

Detachable Wire Drive : Reconfigurable Robot Architecture with Shared Actuators

cs.RO ·2026-08-16 ·Takahiro Hattori, Kento Kawaharazuka, Kei Okada
published similarity 0.63
Abstract · Accepted at IROS2026, website - https://hatofly.github.io/detachable-wire-drive/

Reconfigurable robots offer significant potential for adapting to diverse tasks; however, conventional centralized architectures often require dedicated actuators for each module, leading to substantial increases in overall system weight, volume, and cost. To address these challenges, this paper presents the "Detachable Wire Drive," a reconfigurable robotic system that enables the sharing of heavy and expensive actuators across various morphologies. The core of this system is the "Wire Detach Unit," a mechanism designed to physically split and reconnect wire drive paths, allowing motors to be consolidated into a common base unit. We demonstrate the versatility of this approach by developing a 2-DOF rigid arm, a continuum arm, and two distinct grippers, all of which are interchangeably attached to, and driven by, a single shared actuator set. Experimental results validate the mechanical reliability of the detachment process and the control framework's ability to seamlessly manage transitions between configurations, highlighting a path toward more efficient and multi-functional robotic systems.

0.39

CoEvolve: Self-Evolving Code Policies from Skills to Strategies for Humanoid Robots

cs.RO ·2026-10-16 ·Zicheng Liu, Haochen Wu, Jiawei He, Suyun Zhao, Huan Yang +2 more
similarity 0.63
Abstract

Recent advances in Vision-Language-Action (VLA) models and World Action Models (WAMs) have expanded the manipulation and whole body capabilities of individual robots. Yet a single robot remains limited by its embodiment, and many real world tasks require capabilities that can only emerge through cooperation. Existing multi robot frameworks largely emphasize task decomposition, allocation, and replanning, while providing limited support for adapting executable coordination when physical execution deviates from the intended behavior. We present CoEvolve, a framework that represents team coordination as executable code over fixed robot motor skills. CoEvolve introduces Verifier Guided Coordination Evolution, where a multimodal foundation model instantiates coordination strategies through motion primitives, semantic objectives, temporary robot roles, and bounded execution parameters. Physical verification evaluates each executed transition, rejected behaviors trigger structured coordination revision from an accepted checkpoint, and verified experience is retained to guide subsequent decisions. We evaluate CoEvolve with two simulated Unitree G1 humanoids transporting a freely supported rigid payload through constrained corridors. Across 15 base task runs with three multimodal backbone families, CoEvolve completes 8 tasks, with every backbone achieving end to end success. Additional evaluations yield verified placement on two additional corridor layouts and after both same-backbone and cross-backbone experience initialization, while exposing persistent limitations in motion precision and contact stability. These results support executable coordination as a practical interface for adapting long horizon multi robot collaboration under shared physical constraints.

0.18