CS Paper Radar

PolyMorph: Learning Locomotion Policy for Cross-Embodiment Adaptation

Hyunsik Oh, Seunghun Jeon, Donghoon Youm, Jungwoo Hur, Hyeongjun Kim, Jeong Hyun Lee, Moonkyu Jung, Jemin Hwangbo

cs.RO ·submitted 2026-10-14 05:36 UTC · v1
top venue

Abstract

Reinforcement learning has enabled robust locomotion for legged robots, but learned policies are typically tied to a specific robot morphology and require additional engineering when the number of legs, actuators, or mechanical properties change. We present PolyMorph, a morphology-conditioned framework that learns a single locomotion policy for heterogeneous legged robots. PolyMorph converts each robot's URDF into joint-link modules and combines a recurrent encoder, graph-based Transformer, and per-joint decoder to generate actions across variable leg counts and joint configurations. To improve training stability, PolyMorph uses morphology-normalized rewards, adaptive robot sampling, and URDF-derived PD-gain initialization. We evaluate PolyMorph in simulation across bipedal, tripedal, and quadrupedal robots, including unseen morphology variants and platforms, and deploy the policy on real quadruped platforms operated in multiple configurations. The results show that a single PolyMorph policy generalizes across diverse robot morphologies without per-robot policy retraining.

DOI
10.1109/LRA.2026.3747582

Closest papers

Nearest neighbours by meaning across the whole index.

Learning Purposeful Co-designs of Bio-inspired Quadrupedal Robots

cs.RO ·2026-11-02 ·Fabio Boekel, Jiatao Ding, Cosimo Della Santina
similarity 0.73
Abstract · 10 pages, 7 figures, 6 tables

Treating morphology and control as separate design problems has constrained the efficiency and adaptability of quadrupedal robots, while current co-design approaches are often constrained by restricted design spaces. We overcome this limit by introducing Dogger, a bio-inspired quadruped with modular three-segment legs, four-bar linkages and adjustable passive knee compliance. A two-stage framework combining reinforcement learning and Bayesian optimization is developed: the morphology-conditioned control policy is trained across designs and then held fixed during task-specific design selection. The resulting designs and policies deployed zero-shot reduce the cost of transport by 18.6% and 35.7% for inspection and payload-carrying tasks. Comparisons demonstrate that full geometry-compliance co-design outperforms fixed and restricted design scopes. Cross-task tests further reveal distinct task-specific morphologies with shared mechanical trade-offs. These results provide hardware-level evidence that expanding the physical design space alongside learned control is essential to realize the full potential of task-driven morphology-control co-design in legged robotics.

0.12

Reinforcement Learning Based Multi-Terrain Adaptive Whole-Body Control for a Quadruped Manipulator

cs.RO ·2026-10-16 ·Yanzhou Jin, Fei Suo, Chang Liu, Yasuhisa Hasegawa, Liming Chen +3 more
top venue similarity 0.72
Abstract

Legged robots equipped with manipulators offer promising capabilities for loco-manipulation tasks in unstructured environments. However, achieving task-consistent end-effector behavior during locomotion remains challenging due to terrain-induced disturbances and the strong coupling between locomotion and manipulation, particularly for small-scale quadruped platforms. A reinforcement-learning based whole-body control framework is proposed for quadruped loco-manipulation on complex terrain. The proposed framework combines a hybrid task representation with task-prioritized whole-body learning to coordinate locomotion and manipulation while preserving task-consistent end-effector behavior. A lightweight quadruped manipulator platform is further developed to validate the proposed framework on a small-scale quadruped system. Real-world experiments demonstrate successful deployment on complex terrains such as slopes up to 30 degrees, stairs, and deformable terrain. These results demonstrate the feasibility of deploying learned whole-body control policy for quadruped loco-manipulation in real-world environments and highlight the importance of task-consistent whole-body coordination for terrain-adaptive loco-manipulation.

0.23

Humanoid SRL: Augmenting Humanoids with Supernumerary Limbs for Coordinated Loco-Manipulation

cs.RO ·2026-10-19 ·Fukang Liu, Feiyang Wu, Paul Barsa, Jaehwi Jang, Akshat Jain +10 more
similarity 0.71
Abstract

Humanoid robots are envisioned to perform diverse human-level tasks through their anthropomorphic morphology. Their dual-arm configuration enables a broad range of everyday actions. Yet, as in humans, this morphology can constrain loco-manipulation when both arms are occupied or additional contacts are required beyond their reach. Supernumerary robotic limbs (SRLs) offer a way to extend these capabilities, but their integration requires the added limb to be coordinated with whole-body motion and balance. In this study, we develop and integrate a supernumerary arm into a humanoid platform to investigate how morphological augmentation reshapes its feasible action space. Through quantitative analysis and hardware experiments across two configurations, we show how the additional limb expands whole-body interaction capabilities by enabling manipulation and support to be coordinated beyond the constraints of the native dual-arm configuration. To control this augmented morphology, we leverage model-based trajectory optimization (TO) to generate dynamically feasible motions for goal-conditioned reinforcement learning (RL) controllers. The controllers are trained in simulation and transferred to hardware in a zero-shot manner, enabling coordinated whole-body skills for contact-rich tri-arm loco-manipulation. We further show vision-guided autonomous execution on selected tasks using diffusion policies trained from hardware demonstrations. Our findings suggest that humanoid morphology need not be restricted to human-like forms, but can be reimagined as an extensible design space for robotic augmentation.

0.17

GLAMDRING: Gait Learning And Morphology co-Design via Reinforcement LearnING of CPGs

cs.RO cs.LG ·2026-09-16 ·Amogh Joshi, Kaushik Roy
similarity 0.70
Abstract

Robots are moving out of the structured factory floor and into unstructured environments such as disaster sites, planetary surfaces, and agricultural fields, for which the right robot often does not yet exist. We present GLAMDRING, a framework that synthesizes the optimal robot for a locomotion task and, jointly, learns the controller that drives it. For the given specifications of forward-velocity bounds, a per-actuator power budget, an actuator library, and a payload requirement, GLAMDRING returns a matched quadruped morphology (link geometry and per-joint actuators) and a Hopf-oscillator Central Pattern Generator (CPG) gait policy. We rank feasible designs against a target design objective, viz., maximum speed, minimum Cost of Transport (CoT), or max Payload Margin. Because body and locomotion are coupled, the optimal morphology dictates how a robot is driven, while optimal gait depends on the physical body. We train a small number of CPG policies by reinforcement learning across the space of candidate morphologies, co-learning the gait with the underlying robot hardware. Link lengths and actuators are then resolved post-hoc from the policy's logged operating envelope, reducing synthesis cost to a small, fixed number of reinforcement-learning runs instead of one per candidate. Our experiments show three key findings: co-designing body and gait is necessary to satisfy locomotion constraints; actuator-envelope feasibility, rather than locomotion success alone, determines realizable payload capacity; and canonical animal gaits emerge naturally in most designs from morphology and constraints alone. A real-world demonstration further highlights the efficacy of our work.

0.24

MimicAgent: Quadruped Skills via Prompt-to-Trajectory Generation

cs.RO ·2026-09-21 ·Lucky Kant Nayak, Narayanan Palghat Parameswaran, Neehar Peri, Deva Ramanan
code/data similarity 0.70
Abstract · Project Page: https://luckykantnayak.github.io/mimic-agent/

We present MimicAgent, a prompt-to-trajectory generation framework for learning dynamic quadruped skills. Although reward shaping is extensively used when training quadruped policies, navigating the resulting reward landscape is notoriously difficult, requiring hours of "graduate student descent". Eureka attempts to automate reward design with LLMs, but we find that it struggles to generalize across diverse skills and morphologies. Our key observation is that it is far easier for a human - and by association, an LLM - to generate reference motions than to shape reward functions. Our hypothesis is motivated by the success of example-guided RL for humanoids, which exploits large-scale motion capture datasets as references for training locomotion policies. Unlike humanoids, quadrupeds lack such reference motion data. Towards this end, we propose MimicAgent, an agentic harness that, given a skill prompt, generates quadruped reference trajectories with coding agents. These coarse reference trajectories are then used to train example-guided RL policies that are deployable in simulation and in the real-world. Notably, we find that when prompting Claude Fable 5.1 within our agentic harness, 87% of prompts yield semantically aligned reference trajectories.

0.52

LACE-CRAFT: Robot Co-Design with Actor Inheritance and Blackboard Collaboration

cs.RO ·2026-10-07 ·Yuhan Wen, Jiawei Wang, Qixuan Zhang, Calvin Zhang, Yusen Qin +1 more
similarity 0.70
Abstract · 16 pages including appendix. Corrected source files to match the author list; scientific content unchanged. Project website: https://deemost…

Robot co-design couples morphology search with policy learning, yet training every new design from scratch discards acquired control experience. We present LACE-CRAFT, which compares continued learning on the current robot with policy adaptation to new morphology-reward pairs. LACE resumes the incumbent's full learning state and initializes compatible challengers with its actor parameters and observation statistics. A fixed task metric selects among both branches and the frozen incumbent. CRAFT coordinates Feedback, Morphology, Reward, and Integration roles through shared experimental records and behavioral replays to generate and cross-review paired proposals. A generative extension converts generated meshes into editable articulated models with configured joints, actuator interfaces, and consistently updated simulation assets. Across five locomotion benchmarks, mean scores over three evaluation seeds are 6.4-91.9% higher than D2C. Both methods train 30 new morphology-reward pairs over five rounds; LACE additionally uses four continuation training units. Five-task ablations examine policy inheritance and replay-derived feedback. A fabricated prototype demonstrates indoor walking and illustrates the geometry-to-hardware workflow.

0.33

DUET: Decoupled Upper- and Lower-Body Execution for Task-Agnostic Humanoid Loco-Manipulation

cs.RO cs.LG ·2026-09-19 ·Kapalik Khanal, Biswash Khatiwada, Stephen Afrifa, Fan Wu, Ramesh Bahadur Bist
similarity 0.69
Abstract

Changing a humanoid robot's manipulation policy should not require retraining the controller that maintains the robot's balance. This study introduces DUET, a decoupled execution framework that enables locomotion and manipulation controllers to operate simultaneously by combining their commands only at the robot interface. A reinforcement-learning locomotion policy controls the 12 leg joints and a waist yaw joint, tracking planar velocity, turning rate, and pelvis height from deep crouching to upright standing on a 23-degree-of-freedom Unitree G1. The 10 arm joints are excluded from the action space, while their positions and velocities are included only as observations, so that any compatible manipulation policy that generates arm-joint targets can control the upper body, and the locomotion policy keeps the lower body stable without requiring shared training or direct coordination. This study demonstrates the modular approach on hardware by pairing the same locomotion checkpoint with two different vision-language-action models, GR00T N1.7 and pi0.5. In simulation evaluation, the locomotion controller kept the robot's lower body stable with no falls while tracking the commanded planar velocity, yaw rate, and pelvis height with errors of 0.186 m/s, 0.142 rad/s, and 0.016 m, respectively. Ablation studies identify the upper-body pose curriculum as the dominant component, and removing this training step reduces episode survival from 20.0 to 7.4 seconds and increases the fall rate to 6.06 per environment minute. Robustness tests show no falls under pushes of up to 1.0 m/s within the trained payload range, and no falls at twice the payload limit for pushes below 0.7 m/s. These results show that a manipulation policy can be exchanged without retraining, restarting, or otherwise touching the layer that keeps the robot upright.

0.22

OmniMimic: Dynamics-completed Motion Augmentation for Multi-style Omnidirectional Quadruped Locomotion

cs.RO cs.CVeess.IV ·2026-09-17 ·Sheng Wu, Guoqiang Zhao, Zhe Yang, Fei Teng, Zhikun Zhou +5 more
code/data similarity 0.69
Abstract · The project page is at https://OmniMimic.github.io

Animal demonstrations provide quadruped robots with natural and distinctive gait styles that are difficult to specify through hand-crafted rewards. However, their narrow directional coverage leaves little style-consistent supervision for backward, lateral, and turning commands. We present OmniMimic, a training framework that turns directionally limited animal demonstrations into a single multi-gait policy over target per-axis velocity ranges. OmniMimic first combines temporal reversal, constrained dynamics completion, and sagittal reflection to construct robot-specific kinematic and physical supervision beyond the observed directions. It then expands commands progressively from the demonstrated velocity distribution toward the target per-axis bounds, and uses a shared actor with soft-gated, gait-specialized residual experts to balance reusable locomotion skills with gait-specific corrections. Across four gaits in simulation, OmniMimic reduces mean foot-position RMSE at forward and backward reference velocities by 12.9% and velocity-tracking RMSE on a uniform Cartesian command grid by 63.1%, compared with the matched APEX baseline. The project page is at https://OmniMimic.github.io.

0.35