CS Paper Radar

Reinforcement Learning Based Multi-Terrain Adaptive Whole-Body Control for a Quadruped Manipulator

Yanzhou Jin, Fei Suo, Chang Liu, Yasuhisa Hasegawa, Liming Chen, Yusuke Iwasawa, Yutaka Matsuo, Yaonan Zhu

cs.RO ·submitted 2026-10-16 14:40 UTC · v1
top venue

Abstract

Legged robots equipped with manipulators offer promising capabilities for loco-manipulation tasks in unstructured environments. However, achieving task-consistent end-effector behavior during locomotion remains challenging due to terrain-induced disturbances and the strong coupling between locomotion and manipulation, particularly for small-scale quadruped platforms. A reinforcement-learning based whole-body control framework is proposed for quadruped loco-manipulation on complex terrain. The proposed framework combines a hybrid task representation with task-prioritized whole-body learning to coordinate locomotion and manipulation while preserving task-consistent end-effector behavior. A lightweight quadruped manipulator platform is further developed to validate the proposed framework on a small-scale quadruped system. Real-world experiments demonstrate successful deployment on complex terrains such as slopes up to 30 degrees, stairs, and deformable terrain. These results demonstrate the feasibility of deploying learned whole-body control policy for quadruped loco-manipulation in real-world environments and highlight the importance of task-consistent whole-body coordination for terrain-adaptive loco-manipulation.

Closest papers

Nearest neighbours by meaning across the whole index.

Learning Highly Dynamic Skills Transition for Quadruped Jumping Through Constrained Space

cs.RO ·2026-08-20 ·Zeren Luo, Jiahui Zhang, Yimin Han, Ji Ma, Minghao Lu +2 more
published similarity 0.74
Abstract · 15 pages, 12 figures

Although legged animals are capable of performing explosive motions while traversing confined spaces, replicating this behavior in quadrupedal robots has been a longstanding challenge. Here, we propose a hierarchical reinforcement learning pipeline that empowers the robots to perform aggressive locomotion through constrained obstacles--a narrow gate. The imitation learning technique is used to train the low-level policy, which mimics the behaviors of real animals and forms a set of diverse skills. The high-level controller, having an awareness of the capability of low-level skills and acquiring the gate information via vision-based detection, determines the suitable maneuvers with collision-free trajectories to traverse it dynamically. Notably, we also verify that this framework can be extended to other highly dynamic tasks. This is one of the first works that perform autonomous and agile aerial gate traversal tasks on ground-walking robots, extending the lifelike agility of legged robots to match that of their biological counterparts.

0.59

ELEVATE: Agentic Controller Acquisition from Task Failure for Quadrupedal Manipulation

cs.RO ·2026-10-28 ·Shiqi Liu, Radu Corcodel, Ding Zhao
code/data similarity 0.73
Abstract · 23 pages, 14 figures, including appendix. Project page and videos: https://agentic-quad-elevate.github.io/public/

Quadrupedal manipulators can extend their workspace through whole-body interaction, but task-planning agents' capabilities remain limited by their available controllers. We present ELEVATE, a framework that uses persistent failures during task-program refinement to identify and acquire missing whole-body control capabilities. When these failures suggest a missing physical capability, a coding agent formulates and iteratively refines a reinforcement-learning problem, specifying behavior-specific rewards, curricula, and termination conditions. Validated controllers are added to the capability library and composed with existing controllers to retry the task. Starting from a single pretrained loco-manipulation controller, ELEVATE autonomously acquires controllers for wall-supported elevation, supported manipulation, and wall descent across a sequence of seven simulation tasks. These controllers are reused in subsequent reaching and object-manipulation tasks. On the five tasks beyond the initial controller's workspace, ELEVATE achieves mean success rates of 98.4%-100% across five independent runs, while coding-agent baselines with a fixed controller library fail to complete these tasks. The synthesized task programs, together with the acquired controllers, also transfer to a physical quadrupedal manipulator without real-robot training or fine-tuning, achieving 18/20 successes in rack retrieval and 16/20 in floor-to-rack placement. Videos and demonstrations are available at https://agentic-quad-elevate.github.io/public/.

0.27

Learning Structured Locomotion References for Optimization-Based Whole-Body Control

cs.RO ·2026-10-17 ·Ömer Tarık Banuş, Uluç Saranlı, M. Mert Ankaralı
similarity 0.73
Abstract · 8 pages, 6 figures

Quadruped locomotion requires coordinating body motion,contact forces, foothold placement, and gait timing. We present a hierarchical controller in which reinforcement learning adapts these structured locomotion references while a gait scheduler, reactive footstep planner, and whole-body impulse controller retain responsibility for high-frequency execution. The model-based backbone can sustain a nominal trot independently, allowing the policy to focus on when and how to modify an already functional locomotion controller. We train the complete hierarchy in a vectorized controller-in-the-loop environment using a six-direction disturbance curriculum. Under a common simulator and evaluation protocol, the proposed controller achieves 77.29% mean survival across the tested disturbance grid, compared with 50.35% for the model-based reference controller. Training-time channel ablations identify adaptive foothold placement as the largest marginal contributor to grid survival and reveal direction-dependent effects of gait-rate adaptation. Together, these results demonstrate the viability of the proposed hierarchical controller architecture for integrating learned adaptation with optimization-based whole-body control through structured locomotion references.

0.11

DUET: Decoupled Upper- and Lower-Body Execution for Task-Agnostic Humanoid Loco-Manipulation

cs.RO cs.LG ·2026-09-19 ·Kapalik Khanal, Biswash Khatiwada, Stephen Afrifa, Fan Wu, Ramesh Bahadur Bist
similarity 0.73
Abstract

Changing a humanoid robot's manipulation policy should not require retraining the controller that maintains the robot's balance. This study introduces DUET, a decoupled execution framework that enables locomotion and manipulation controllers to operate simultaneously by combining their commands only at the robot interface. A reinforcement-learning locomotion policy controls the 12 leg joints and a waist yaw joint, tracking planar velocity, turning rate, and pelvis height from deep crouching to upright standing on a 23-degree-of-freedom Unitree G1. The 10 arm joints are excluded from the action space, while their positions and velocities are included only as observations, so that any compatible manipulation policy that generates arm-joint targets can control the upper body, and the locomotion policy keeps the lower body stable without requiring shared training or direct coordination. This study demonstrates the modular approach on hardware by pairing the same locomotion checkpoint with two different vision-language-action models, GR00T N1.7 and pi0.5. In simulation evaluation, the locomotion controller kept the robot's lower body stable with no falls while tracking the commanded planar velocity, yaw rate, and pelvis height with errors of 0.186 m/s, 0.142 rad/s, and 0.016 m, respectively. Ablation studies identify the upper-body pose curriculum as the dominant component, and removing this training step reduces episode survival from 20.0 to 7.4 seconds and increases the fall rate to 6.06 per environment minute. Robustness tests show no falls under pushes of up to 1.0 m/s within the trained payload range, and no falls at twice the payload limit for pushes below 0.7 m/s. These results show that a manipulation policy can be exchanged without retraining, restarting, or otherwise touching the layer that keeps the robot upright.

0.22

Duty Factor Predicts Robust Constrained Quadrupedal Locomotion Across Gait Types

cs.RO ·2026-09-18 ·James Zhu, David Ologan, George Ortiz, Thomas Chun Fai Lee, Selvin Garcia Gonzalez +3 more
similarity 0.73
Abstract

Quadrupedal robots are increasingly deployed in environments where locomotion must remain robust to disturbances and constrained terrain. Gait type, such as walking or trotting, is commonly used to characterize quadrupedal locomotion. However, gait type does not uniquely define locomotion, as parameters such as duty factor, speed, and stance width can vary within a single gait type. In this work, we investigate the relationship between these gait parameters using three distinct quadrupedal locomotion control approaches. First, using whole body trajectory optimization with LQR feedback, we show that duty factor is a stronger predictor of local error convergence than nominal gait type. Second, we investigate duty factor selection with a learned locomotion controller, suggesting how duty factor may serve as a low-dimensional parameter for adapting locomotion robustness in narrow-terrain environments. Finally, we show that these trends persist under a centroidal model predictive control framework and validate them through narrow-terrain experiments on a physical quadruped. These results show that duty factor provides a simple and effective basis for understanding and selecting robust quadrupedal locomotion across gait types and control architectures.

0.27

SOMA: Stack-of-Objects Manipulation using a Quadruped Robot

cs.RO cs.AI ·2026-10-14 ·Stergios E. Bachoumas, Panagiotis Artemiadis
similarity 0.72
Abstract · 9 pages

Executing heavy-duty physical manipulation in unpredictable environments remains a major challenge for quadrupedal robots lacking dedicated manipulators. This paper presents SOMA, a hierarchical reinforcement learning framework for whole-body non-prehensile manipulation of multi-object stacks using a quadruped robot. Unlike traditional methods restricted to two-dimensional planar pushing, SOMA integrates explicit robot base-height control, unlocking full three-dimensional pushing strategies. This capability enables the quadruped to manipulate complex payload stacks as a unified system while preventing relative sliding or tipping of upper layers. The architecture factorizes control into a high-level manipulation policy using a Simplified Structured State Space Sequence (S5) encoder to reason over long-horizon temporal history and predict bounded target tracking commands via Beta distributions, and a low-level locomotion policy that dynamically adapts leg stance configurations. In extensive simulation benchmarks, SOMA achieves a $90.3\%$ success rate for single-object reposing and up to $90.1\%$ for dynamic two-box stacks under stringent error margins ($0.05\text{ m}$ position error, $1^\circ$ orientation error). Finally, we validate zero-shot sim-to-real transfer on a Unitree Go1 quadruped robot across diverse payload masses and geometries, demonstrating active base-height adjustments to maintain traction and balance during heavy pushing tasks.

0.28

PolyMorph: Learning Locomotion Policy for Cross-Embodiment Adaptation

cs.RO ·2026-10-14 ·Hyunsik Oh, Seunghun Jeon, Donghoon Youm, Jungwoo Hur, Hyeongjun Kim +3 more
top venue similarity 0.72
Abstract

Reinforcement learning has enabled robust locomotion for legged robots, but learned policies are typically tied to a specific robot morphology and require additional engineering when the number of legs, actuators, or mechanical properties change. We present PolyMorph, a morphology-conditioned framework that learns a single locomotion policy for heterogeneous legged robots. PolyMorph converts each robot's URDF into joint-link modules and combines a recurrent encoder, graph-based Transformer, and per-joint decoder to generate actions across variable leg counts and joint configurations. To improve training stability, PolyMorph uses morphology-normalized rewards, adaptive robot sampling, and URDF-derived PD-gain initialization. We evaluate PolyMorph in simulation across bipedal, tripedal, and quadrupedal robots, including unseen morphology variants and platforms, and deploy the policy on real quadruped platforms operated in multiple configurations. The results show that a single PolyMorph policy generalizes across diverse robot morphologies without per-robot policy retraining.

0.38

Learning Purposeful Co-designs of Bio-inspired Quadrupedal Robots

cs.RO ·2026-11-02 ·Fabio Boekel, Jiatao Ding, Cosimo Della Santina
similarity 0.72
Abstract · 10 pages, 7 figures, 6 tables

Treating morphology and control as separate design problems has constrained the efficiency and adaptability of quadrupedal robots, while current co-design approaches are often constrained by restricted design spaces. We overcome this limit by introducing Dogger, a bio-inspired quadruped with modular three-segment legs, four-bar linkages and adjustable passive knee compliance. A two-stage framework combining reinforcement learning and Bayesian optimization is developed: the morphology-conditioned control policy is trained across designs and then held fixed during task-specific design selection. The resulting designs and policies deployed zero-shot reduce the cost of transport by 18.6% and 35.7% for inspection and payload-carrying tasks. Comparisons demonstrate that full geometry-compliance co-design outperforms fixed and restricted design scopes. Cross-task tests further reveal distinct task-specific morphologies with shared mechanical trade-offs. These results provide hardware-level evidence that expanding the physical design space alongside learned control is essential to realize the full potential of task-driven morphology-control co-design in legged robotics.

0.12