CS Paper Radar

ELEVATE: Agentic Controller Acquisition from Task Failure for Quadrupedal Manipulation

Shiqi Liu, Radu Corcodel, Ding Zhao

cs.RO ·submitted 2026-10-28 07:24 UTC · v1
code/data

Abstract

Quadrupedal manipulators can extend their workspace through whole-body interaction, but task-planning agents' capabilities remain limited by their available controllers. We present ELEVATE, a framework that uses persistent failures during task-program refinement to identify and acquire missing whole-body control capabilities. When these failures suggest a missing physical capability, a coding agent formulates and iteratively refines a reinforcement-learning problem, specifying behavior-specific rewards, curricula, and termination conditions. Validated controllers are added to the capability library and composed with existing controllers to retry the task. Starting from a single pretrained loco-manipulation controller, ELEVATE autonomously acquires controllers for wall-supported elevation, supported manipulation, and wall descent across a sequence of seven simulation tasks. These controllers are reused in subsequent reaching and object-manipulation tasks. On the five tasks beyond the initial controller's workspace, ELEVATE achieves mean success rates of 98.4%-100% across five independent runs, while coding-agent baselines with a fixed controller library fail to complete these tasks. The synthesized task programs, together with the acquired controllers, also transfer to a physical quadrupedal manipulator without real-robot training or fine-tuning, achieving 18/20 successes in rack retrieval and 16/20 in floor-to-rack placement. Videos and demonstrations are available at https://agentic-quad-elevate.github.io/public/.

Comment
23 pages, 14 figures, including appendix. Project page and videos: https://agentic-quad-elevate.github.io/public/

Closest papers

Nearest neighbours by meaning across the whole index.

ThinkLocoManip: A Whole-Body Control Agentic Harness for Legged Loco-Manipulation

cs.RO ·2026-10-25 ·Nuo Chen, Shizeng Zhang, Yujie Yang, Jinghong Wang, Zhenyang Qu +8 more
similarity 0.74
Abstract

In this paper, we propose ThinkLocoManip, an agentic harness for legged loco-manipulation designed to tackle complex, long-horizon tasks in large-scale environments. Existing approaches typically follow either direct action generation or a plan-then-act paradigm, both of which can struggle with the generalization and error-recovery capabilities required for extended task execution. In contrast, ThinkLocoManip adopts an interleaved reasoning-and-acting paradigm, allowing the agent to continuously reason about its current state, execute actions, observe their outcomes, and adapt its strategy accordingly. Building on this paradigm, our agentic harness orchestrates a suite of specialized tools for perception, navigation, manipulation, and locomotion, enabling flexible composition of heterogeneous capabilities. Unlike existing robotic agentic harnesses, ThinkLocoManip explicitly incorporates locomotion as a tool domain for agent reasoning and execution. We further design a set of skills that explicitly account for both tool usage within each functional domain and coordination across domains, supporting effective execution of complex behaviors over long horizons. To tackle task failure during long-horizon interactions, we develop keyframe thinking mechanism to preserve critical execution context and support efficient error recovery. Extensive real-world experiments demonstrate that ThinkLocoManip substantially outperforms representative methods based on both direct action generation and plan-then-act paradigms across challenging long-horizon legged loco-manipulation tasks. Notably, ThinkLocoManip achieves a success rate of 77%, more than twice that of the strongest plan-then-act baseline (37.1%). Our experiments further validate the effectiveness of interleaved reasoning and acting, tool orchestration, and coordinated skill execution.

0.15

Reinforcement Learning Based Multi-Terrain Adaptive Whole-Body Control for a Quadruped Manipulator

cs.RO ·2026-10-16 ·Yanzhou Jin, Fei Suo, Chang Liu, Yasuhisa Hasegawa, Liming Chen +3 more
top venue similarity 0.73
Abstract

Legged robots equipped with manipulators offer promising capabilities for loco-manipulation tasks in unstructured environments. However, achieving task-consistent end-effector behavior during locomotion remains challenging due to terrain-induced disturbances and the strong coupling between locomotion and manipulation, particularly for small-scale quadruped platforms. A reinforcement-learning based whole-body control framework is proposed for quadruped loco-manipulation on complex terrain. The proposed framework combines a hybrid task representation with task-prioritized whole-body learning to coordinate locomotion and manipulation while preserving task-consistent end-effector behavior. A lightweight quadruped manipulator platform is further developed to validate the proposed framework on a small-scale quadruped system. Real-world experiments demonstrate successful deployment on complex terrains such as slopes up to 30 degrees, stairs, and deformable terrain. These results demonstrate the feasibility of deploying learned whole-body control policy for quadruped loco-manipulation in real-world environments and highlight the importance of task-consistent whole-body coordination for terrain-adaptive loco-manipulation.

0.23

SOMA: Stack-of-Objects Manipulation using a Quadruped Robot

cs.RO cs.AI ·2026-10-14 ·Stergios E. Bachoumas, Panagiotis Artemiadis
similarity 0.71
Abstract · 9 pages

Executing heavy-duty physical manipulation in unpredictable environments remains a major challenge for quadrupedal robots lacking dedicated manipulators. This paper presents SOMA, a hierarchical reinforcement learning framework for whole-body non-prehensile manipulation of multi-object stacks using a quadruped robot. Unlike traditional methods restricted to two-dimensional planar pushing, SOMA integrates explicit robot base-height control, unlocking full three-dimensional pushing strategies. This capability enables the quadruped to manipulate complex payload stacks as a unified system while preventing relative sliding or tipping of upper layers. The architecture factorizes control into a high-level manipulation policy using a Simplified Structured State Space Sequence (S5) encoder to reason over long-horizon temporal history and predict bounded target tracking commands via Beta distributions, and a low-level locomotion policy that dynamically adapts leg stance configurations. In extensive simulation benchmarks, SOMA achieves a $90.3\%$ success rate for single-object reposing and up to $90.1\%$ for dynamic two-box stacks under stringent error margins ($0.05\text{ m}$ position error, $1^\circ$ orientation error). Finally, we validate zero-shot sim-to-real transfer on a Unitree Go1 quadruped robot across diverse payload masses and geometries, demonstrating active base-height adjustments to maintain traction and balance during heavy pushing tasks.

0.28

DUET: Decoupled Upper- and Lower-Body Execution for Task-Agnostic Humanoid Loco-Manipulation

cs.RO cs.LG ·2026-09-19 ·Kapalik Khanal, Biswash Khatiwada, Stephen Afrifa, Fan Wu, Ramesh Bahadur Bist
similarity 0.71
Abstract

Changing a humanoid robot's manipulation policy should not require retraining the controller that maintains the robot's balance. This study introduces DUET, a decoupled execution framework that enables locomotion and manipulation controllers to operate simultaneously by combining their commands only at the robot interface. A reinforcement-learning locomotion policy controls the 12 leg joints and a waist yaw joint, tracking planar velocity, turning rate, and pelvis height from deep crouching to upright standing on a 23-degree-of-freedom Unitree G1. The 10 arm joints are excluded from the action space, while their positions and velocities are included only as observations, so that any compatible manipulation policy that generates arm-joint targets can control the upper body, and the locomotion policy keeps the lower body stable without requiring shared training or direct coordination. This study demonstrates the modular approach on hardware by pairing the same locomotion checkpoint with two different vision-language-action models, GR00T N1.7 and pi0.5. In simulation evaluation, the locomotion controller kept the robot's lower body stable with no falls while tracking the commanded planar velocity, yaw rate, and pelvis height with errors of 0.186 m/s, 0.142 rad/s, and 0.016 m, respectively. Ablation studies identify the upper-body pose curriculum as the dominant component, and removing this training step reduces episode survival from 20.0 to 7.4 seconds and increases the fall rate to 6.06 per environment minute. Robustness tests show no falls under pushes of up to 1.0 m/s within the trained payload range, and no falls at twice the payload limit for pushes below 0.7 m/s. These results show that a manipulation policy can be exchanged without retraining, restarting, or otherwise touching the layer that keeps the robot upright.

0.22

SUN: Agentic Robot Policy Learning with Persistent Task Programs

cs.RO cs.AI ·2026-08-31 ·Weiqi Wang, Zhi Li, Yudong Lei, David Martinez, Xiaofeng Gao +5 more
similarity 0.71
Abstract

Model-based control can directly execute specified objectives, while learning can amortize such behaviors into reactive policies, making their combination a natural solution to multi-stage manipulation. We introduce Semantically UNified (SUN) Programs, typed executables that compile grounded relations into aligned optimal control objectives, satisfaction predicates, and learning rewards. Our harness, Kuafu, equips a foundation model as a task-level agent to orchestrate scene preparation, verification, residual RL, and data production. The agent uses program feedback to repair candidate programs and training diagnostics to calibrate relative reward weights, retaining accepted task semantics across tool calls. Across nine multi-stage manipulation tasks, Kuafu achieves 82.03% average success rate, significantly outperforming all learned baselines. Its learned controllers generate demonstrations at 10.57x the human-teleoperation rate, yielding data that improve visualpolicy success by 23.6 percentage points over the strongest baseline. The policies transfer zero-shot to physical Franka and Kinova robots, demonstrating sim-to-real generalization.

0.16

PolyMorphWBC: Whole-Body Control from End-Effector Trajectories for Quadrupedal Mobile Manipulation across Arm Morphologies with Extended Reach

cs.RO ·2026-11-11 ·Heng Li, Yang Li, Yifan Duan, Ren Fang, Matao Duan +4 more
similarity 0.70
Abstract · 8 pages, 4 figures

Quadrupedal mobile manipulators can extend their manipulation workspace by coordinating the mounted arm with the mobile base. At the task level, short-horizon end-effector (EE) trajectories provide an interface for specifying the desired manipulation motion without prescribing how it should be realized by the arm and base. However, executing such trajectories remains challenging because the controller must determine when and how the base should move, and this decision depends on the mounted-arm morphology. We therefore present PolyMorphWBC, a hierarchical controller that takes an EE trajectory as the sole task-level motion command and generates coordinated arm--base motions across four families of 6-DoF mounted arms, with extended-reach trajectories beyond the initial fixed-base reach. Within PolyMorphWBC, a trajectory-conditioned coordinator determines the base motion from previewed EE targets, while arm-specific Inverse Kinematics (IK) tracks the current target, and a frozen locomotion backend executes the resulting motion. Cross-arm reuse is enabled by a Unified Robot Description Format (URDF)-derived morphology conditioning, together with online residual-wrench feedback. We train PolyMorphWBC on procedurally generated arms and structured trajectories within and beyond fixed-base reach. In IsaacLab, it achieves 93.95% completion with 2.30cm position error and 4.81° orientation error on held-out trajectories and arm morphologies. In MuJoCo evaluation against UMI-on-Legs, PolyMorphWBC reduces EE position error by 69--72% and orientation error by 91--97% across four within- and extended-reach trajectories. On a physical Go2--ARX5 system, we demonstrate language-conditioned extended-reach pick-and-place using EE trajectories from pi_0 without vision-language-action (VLA)-generated base commands.

0.17

InterEvolve: Test-Time Evolution of Reward Programs for Humanoid Loco-Manipulation

cs.RO cs.CVcs.GR ·2026-10-01 ·Zhuo Lin, Sirui Xu, Liuyu Bian, Yu-Xiong Wang, Liang-Yan Gui
code/data similarity 0.70
Abstract · Project page: https://sirui-xu.github.io/InterEvolve

We study test-time evolution for humanoid loco-manipulation: solving tasks that a controller was never trained for by repurposing its existing skills, improving from its own attempts, and retaining what it learns, without retraining. Our key insight is that a broad controller already holds much of the competence a new task needs, and that this competence becomes accessible through an interface between planning and control that is expressive enough to specify contact-rich, multi-stage interactions, yet executable and measurable enough that execution feedback can guide planning from experience. InterEvolve realizes this interface with two components. First, we develop an object-aware forward-backward (FB) behavioral foundation model, whose object residuals on a frozen body prior turn a new reward about the body or objects into loco-manipulation behavior at test time. Second, we specify tasks as reward programs: staged rewards with completion conditions and tunable constants. A large language model (LLM) agent revises the program structure in context, drawing on execution feedback and a skill library of verified programs, while a numerical optimizer tunes its constants. With every candidate verified across parallel simulation scenarios, the program explores new ways to induce, repurpose, and compose the controller's existing motor competence for the task at hand, and thus improves over iterations. Experiments show that human-designed rewards leave much of the FB model's loco-manipulation competence untapped, whereas the programs InterEvolve evolves release it, sometimes through novel strategies. It further produces behaviors for diverse tasks, complex scenes, and long-horizon compositions in simulation, and evolved skills run autonomously on a physical Unitree G1 from egocentric onboard perception.

0.53

DynaForge: Planning-Guided Residual Learning for Dynamic Manipulation Demonstration Generation

cs.RO ·2026-09-22 ·Yiyang Jin, Yu Zheng, Xiao He, Hesheng Wang
similarity 0.70
Abstract · 8 pages, 6 figures. Under review

Dynamic object manipulation is essential for robots operating in real-world environments, yet methods for generating high-quality demonstrations remain limited. Methods designed for static tasks do not readily transfer to dynamic settings. Among dynamic demonstration generators, planning-based methods can fail near contact, while DOMINO-style replay simplifies dynamic interactions and may limit the experience available for policy learning. We present DynaForge, a planning-guided framework that learns residual corrections for dynamic manipulation demonstration generation. DynaForge combines low-frequency global planning with high-frequency object-centric inverse kinematics across task phases, and applies a residual policy to correct actions during dynamic interaction. An implicit curriculum groups rollouts under matched conditions and selects mixed-success groups, focusing residual reinforcement learning on the evolving competence frontier. On Can and Bottle, it uses 0.73x as many optimizer steps as vanilla GRPO at the same nominal environment-step budget, with higher observed final success rates. Across nine simulation tasks, DynaForge increases mean demonstration-generation success from 41.30% of the planning prior to 78.37%. With 800 demonstrations per task, DP3 policies trained on DynaForge data achieve 49.11% mean success, compared with 7.07% for DOMINO data. On three real-world dynamic tasks, DynaForge-trained policies achieve 30-60% success, compared with 0-10% for DOMINO-trained policies, showing the ability of DynaForge for sim-to-real transfer.

0.24