CS Paper Radar

Duty Factor Predicts Robust Constrained Quadrupedal Locomotion Across Gait Types

James Zhu, David Ologan, George Ortiz, Thomas Chun Fai Lee, Selvin Garcia Gonzalez, Ardalan Tajbakhsh, Pinhas Ben-Tzvi, Aaron M. Johnson

cs.RO ·submitted 2026-09-18 17:57 UTC · v1

Abstract

Quadrupedal robots are increasingly deployed in environments where locomotion must remain robust to disturbances and constrained terrain. Gait type, such as walking or trotting, is commonly used to characterize quadrupedal locomotion. However, gait type does not uniquely define locomotion, as parameters such as duty factor, speed, and stance width can vary within a single gait type. In this work, we investigate the relationship between these gait parameters using three distinct quadrupedal locomotion control approaches. First, using whole body trajectory optimization with LQR feedback, we show that duty factor is a stronger predictor of local error convergence than nominal gait type. Second, we investigate duty factor selection with a learned locomotion controller, suggesting how duty factor may serve as a low-dimensional parameter for adapting locomotion robustness in narrow-terrain environments. Finally, we show that these trends persist under a centroidal model predictive control framework and validate them through narrow-terrain experiments on a physical quadruped. These results show that duty factor provides a simple and effective basis for understanding and selecting robust quadrupedal locomotion across gait types and control architectures.

Closest papers

Nearest neighbours by meaning across the whole index.

Reinforcement Learning Based Multi-Terrain Adaptive Whole-Body Control for a Quadruped Manipulator

cs.RO ·2026-10-16 ·Yanzhou Jin, Fei Suo, Chang Liu, Yasuhisa Hasegawa, Liming Chen +3 more
similarity 0.73
Abstract

Legged robots equipped with manipulators offer promising capabilities for loco-manipulation tasks in unstructured environments. However, achieving task-consistent end-effector behavior during locomotion remains challenging due to terrain-induced disturbances and the strong coupling between locomotion and manipulation, particularly for small-scale quadruped platforms. A reinforcement-learning based whole-body control framework is proposed for quadruped loco-manipulation on complex terrain. The proposed framework combines a hybrid task representation with task-prioritized whole-body learning to coordinate locomotion and manipulation while preserving task-consistent end-effector behavior. A lightweight quadruped manipulator platform is further developed to validate the proposed framework on a small-scale quadruped system. Real-world experiments demonstrate successful deployment on complex terrains such as slopes up to 30 degrees, stairs, and deformable terrain. These results demonstrate the feasibility of deploying learned whole-body control policy for quadruped loco-manipulation in real-world environments and highlight the importance of task-consistent whole-body coordination for terrain-adaptive loco-manipulation.

0.09

Energy-Efficient Gait Adaptation via Hierarchical Reinforcement Learning for Quadrupedal Locomotion Across Diverse Terrains

cs.RO cs.LG ·2026-10-07 ·Ammar Issa, Anubhav Singh, Anton Tsaritsin, Sergey Kolyubin
similarity 0.71
Abstract · 9 pages. Submitted to IEEE ICRA 2027. Ammar Issa, Anubhav Singh, and Anton Tsaritsin contributed equally

While energy efficiency is a critical objective for legged-robot locomotion control, achieving low energy consumption while maintaining robust performance across different velocity ranges and terrain conditions remains a key challenge. This is particularly true for end-to-end RL policies, where gait generation, motion execution, and energy optimization are tightly coupled, leading to high sensitivity to reward design. In this work, we propose a hierarchical reinforcement learning (HRL) framework that separates a high-frequency policy for stable and robust joint-level motion execution from low-frequency gait adaptation that explicitly minimizes the cost of transport (CoT). The three-stage Isaac-based training procedure enables zero-shot sim-to-real transfer with improved tracking accuracy, robustness, and energy efficiency. The learned hierarchy exhibits automatic speed-dependent gait adaptation, transitioning from pacing at low speeds to trotting at higher speeds. We validate the proposed approach in simulation against representative single-policy and hierarchical locomotion baselines, demonstrating reduced CoT over a broad range of commanded velocities, while maintaining robust locomotion across flat, uneven rough, and inclined terrains. We further demonstrate its practical feasibility through zero-shot deployment on a physical Unitree AlienGo quadruped.

0.27

Learning Structured Locomotion References for Optimization-Based Whole-Body Control

cs.RO ·2026-10-17 ·Ömer Tarık Banuş, Uluç Saranlı, M. Mert Ankaralı
similarity 0.70
Abstract · 8 pages, 6 figures

Quadruped locomotion requires coordinating body motion,contact forces, foothold placement, and gait timing. We present a hierarchical controller in which reinforcement learning adapts these structured locomotion references while a gait scheduler, reactive footstep planner, and whole-body impulse controller retain responsibility for high-frequency execution. The model-based backbone can sustain a nominal trot independently, allowing the policy to focus on when and how to modify an already functional locomotion controller. We train the complete hierarchy in a vectorized controller-in-the-loop environment using a six-direction disturbance curriculum. Under a common simulator and evaluation protocol, the proposed controller achieves 77.29% mean survival across the tested disturbance grid, compared with 50.35% for the model-based reference controller. Training-time channel ablations identify adaptive foothold placement as the largest marginal contributor to grid survival and reveal direction-dependent effects of gait-rate adaptation. Together, these results demonstrate the viability of the proposed hierarchical controller architecture for integrating learned adaptation with optimization-based whole-body control through structured locomotion references.

0.11

CADENCE: Learning Acyclic Gaits for Model-Based Quadruped Locomotion

cs.RO ·2026-11-17 ·Owen Sullivan, Sourav Selvaraj, Mahdi Agheli
hot direction similarity 0.70
Abstract · 18 pages, 8 figures, 2 tables

Model-based quadruped controllers usually step on a cyclic gait, which lifts the legs in a fixed order on a fixed period, wherever the safe footholds are. We present CADENCE, a learned step planner with a small action space. Every 40 ms, it picks one of at most 65 discrete choices: no step, or one leg's step to a safe foothold. It also predicts a swing time. We train CADENCE by reinforcement learning on top of a convex model predictive controller (MPC). Nothing prescribes a gait: there is no gait schedule, and the reward has no gait term, only a cost per step. The one structural constraint is that at most two legs may swing at once. The policy we analyzed developed an acyclic gait, with no fixed period or stepping order, yet it still paired diagonal legs. An inverse footstep model (IFM), fitted on a controller's logged steps, turns each foothold into a command. With only the IFM refitted, on fewer than 20,000 steps, CADENCE ran frozen on OCS2's nonlinear MPC. In simulated trials on a range of terrains (26% to 49% voids) and speeds (0.1 m/s and 0.2 m/s), it succeeded in 85.1% (mean of five seeds), against 67.8% for OCS2-Trot, 65.5% for OCS2-Single, and 39.6% in a static walk ablation of CADENCE. At 49% voids, it succeeded in 72.9%, against 43.0% for OCS2-Trot.

0.37

Exploring Nonlinear Body Oscillations for Natural Quadruped Gaits

cs.RO ·2026-09-01 ·Annika Schmidt, Davide Calzolari, Arne Sachtler, Florian Loeffl, Daniel Seidel +11 more
similarity 0.68
Abstract

Animals' body morphology shapes the gait patterns they can perform, where mechanical resonance reduces the need for active control. By tuning posture and muscle stiffness, they leverage their embodied intelligence to achieve effective gaits for different speeds. In contrast, most quadruped robots are not specifically designed to exploit mechanical resonance due to the complexity of nonlinear dynamics and require dedicated locomotion controllers. To provide an alternative, we present a proof of concept framework making the nonlinear dynamics of a robot predictable in the design process and show how this knowledge can be leveraged such that multi-gait locomotion can emerge from nonlinear resonances, shaped by gravity, inertia, and elasticity. We present the highly compliant quadruped robot eBert, on which we identify six nonlinear normal modes (NNMs) using our new theoretical tools and validate their existence in simulation and hardware. With black-box optimization to determine step length, simulations show how each NNM naturally develops into a distinct gait, manifesting different speeds, which also largely transfers to the robotic hardware. Our experiments show that eBert can exploit its mechanics to generate task-specific movements which may serve as foundation for designing a new generation of agile and efficient robots leveraging embodied intelligence.

0.26

ReCo: Response-Consistent Locomotion with Policy-Aware MPC for Legged Manipulation

cs.RO ·2026-10-01 ·Kuankuan Sima, Yichao Gao, Chenxi Gu, Kefan Zhao, Lin Zhao
benchmark similarity 0.67
Abstract

Continuous legged manipulation requires accurate end-effector tracking while the base keeps walking. Combining reinforcement learning (RL) with model predictive control (MPC) suits this task: the learned policy provides robust locomotion, while MPC coordinates the base and arm to compensate for tracking errors. However, MPC can compensate only for base motion that it can predict, and a learned policy's command response varies with gait phase, contact, and payload. We present ReCo, a framework that couples response-consistent locomotion with policy-aware MPC for legged manipulation. Response shaping trains the policy to respond to commands consistently and repeatably across randomized dynamics. An identified closed-loop response model then lets MPC jointly plan locomotion commands and arm motion. On the simulation benchmark, ReCo reduces position and orientation root-mean-square error (RMSE) by 28.7% and 27.4% relative to the best baseline for each metric. Real-world experiments demonstrate onboard continuous legged manipulation with coordinated base and arm motion.

0.17

Anticipatory Gait Switching for Quadrupeds via Look-Ahead MDP Planning

cs.RO ·2026-10-17 ·Kelvin Aladum, Justin Peel, Nisar Ahmed
similarity 0.67
Abstract

Quadruped robots often switch gaits to traverse mixed terrain safely. Many practical supervisors enforce hardware constraints (e.g., dwell or guard intervals) using a transition handler. However, the switch decision itself is often driven by near-field thresholds, which can delay commitment when rough terrain is only detected shortly before contact in the local height map. We propose a lightweight height-map-only gait supervisor that unifies look-ahead and locomotion constraints in a single decision policy. A robot-centered height map is partitioned into near-, mid-, and far-field bands, each discretized into a terrain class, and band evolution is modeled as a Markov process. Gait selection is cast as a look-ahead Markov Decision Process whose transition model and cost explicitly encode platform-specific switching constraints. Indoor and outdoor experiments on a Unitree Go2 platform show reduced late switching, lower time spent using ineffective gaits on rough terrain, and improved roll stability compared to tuned reactive baselines. Overall, the MDP formulation yields anticipative constraint-aware gait switching that improves robustness without course-specific retuning.

0.12

LocoWM: High-Precision Locomotion through World-Model-Guided Residual Adaptation

cs.RO ·2026-09-30 ·Zijie Zhao, Shengqian Chen, Xiaoxu Wang, Han Jiang, Yuanheng Zhu +1 more
code/data similarity 0.67
Abstract

High-precision locomotion combines motion-command tracking with precise regulation of task-relevant physical states, enabling robots to interact reliably with their surroundings during motion. Joint end-to-end optimization can leave precision objectives insufficiently optimized, while reactive residual control adjusts actions only after deviations become observable. We present \textbf{LocoWM}, a world-model-guided preactive residual adaptation framework for high-precision locomotion. A base policy provides command-following locomotion, while an action-conditioned world model predicts a sequence of future physical states from proprioceptive history and the proposed base action. A residual adapter conditions on this predicted sequence to generate additive action corrections that compensate for anticipated deviations. Two-stage training first learns locomotion and action-conditioned dynamics, then freezes both modules while training the adapter, separating locomotion acquisition from precision adaptation. Experiments spanning terrain leveling, acceleration compensation, and push recovery demonstrate improved control precision and disturbance robustness over end-to-end and reactive residual baselines. Demos and code are available at: https://zhaozijie2022.github.io/LocoWM

0.32