CS Paper Radar

Learning Purposeful Co-designs of Bio-inspired Quadrupedal Robots

Fabio Boekel, Jiatao Ding, Cosimo Della Santina

cs.RO ·submitted 2026-11-02 03:25 UTC · v1

Abstract

Treating morphology and control as separate design problems has constrained the efficiency and adaptability of quadrupedal robots, while current co-design approaches are often constrained by restricted design spaces. We overcome this limit by introducing Dogger, a bio-inspired quadruped with modular three-segment legs, four-bar linkages and adjustable passive knee compliance. A two-stage framework combining reinforcement learning and Bayesian optimization is developed: the morphology-conditioned control policy is trained across designs and then held fixed during task-specific design selection. The resulting designs and policies deployed zero-shot reduce the cost of transport by 18.6% and 35.7% for inspection and payload-carrying tasks. Comparisons demonstrate that full geometry-compliance co-design outperforms fixed and restricted design scopes. Cross-task tests further reveal distinct task-specific morphologies with shared mechanical trade-offs. These results provide hardware-level evidence that expanding the physical design space alongside learned control is essential to realize the full potential of task-driven morphology-control co-design in legged robotics.

Comment
10 pages, 7 figures, 6 tables

Closest papers

Nearest neighbours by meaning across the whole index.

PolyMorph: Learning Locomotion Policy for Cross-Embodiment Adaptation

cs.RO ·2026-10-14 ·Hyunsik Oh, Seunghun Jeon, Donghoon Youm, Jungwoo Hur, Hyeongjun Kim +3 more
top venue similarity 0.73
Abstract

Reinforcement learning has enabled robust locomotion for legged robots, but learned policies are typically tied to a specific robot morphology and require additional engineering when the number of legs, actuators, or mechanical properties change. We present PolyMorph, a morphology-conditioned framework that learns a single locomotion policy for heterogeneous legged robots. PolyMorph converts each robot's URDF into joint-link modules and combines a recurrent encoder, graph-based Transformer, and per-joint decoder to generate actions across variable leg counts and joint configurations. To improve training stability, PolyMorph uses morphology-normalized rewards, adaptive robot sampling, and URDF-derived PD-gain initialization. We evaluate PolyMorph in simulation across bipedal, tripedal, and quadrupedal robots, including unseen morphology variants and platforms, and deploy the policy on real quadruped platforms operated in multiple configurations. The results show that a single PolyMorph policy generalizes across diverse robot morphologies without per-robot policy retraining.

0.38

Reinforcement Learning Based Multi-Terrain Adaptive Whole-Body Control for a Quadruped Manipulator

cs.RO ·2026-10-16 ·Yanzhou Jin, Fei Suo, Chang Liu, Yasuhisa Hasegawa, Liming Chen +3 more
top venue similarity 0.72
Abstract

Legged robots equipped with manipulators offer promising capabilities for loco-manipulation tasks in unstructured environments. However, achieving task-consistent end-effector behavior during locomotion remains challenging due to terrain-induced disturbances and the strong coupling between locomotion and manipulation, particularly for small-scale quadruped platforms. A reinforcement-learning based whole-body control framework is proposed for quadruped loco-manipulation on complex terrain. The proposed framework combines a hybrid task representation with task-prioritized whole-body learning to coordinate locomotion and manipulation while preserving task-consistent end-effector behavior. A lightweight quadruped manipulator platform is further developed to validate the proposed framework on a small-scale quadruped system. Real-world experiments demonstrate successful deployment on complex terrains such as slopes up to 30 degrees, stairs, and deformable terrain. These results demonstrate the feasibility of deploying learned whole-body control policy for quadruped loco-manipulation in real-world environments and highlight the importance of task-consistent whole-body coordination for terrain-adaptive loco-manipulation.

0.23

LACE-CRAFT: Robot Co-Design with Actor Inheritance and Blackboard Collaboration

cs.RO ·2026-10-07 ·Yuhan Wen, Jiawei Wang, Qixuan Zhang, Calvin Zhang, Yusen Qin +1 more
similarity 0.68
Abstract · 16 pages including appendix. Corrected source files to match the author list; scientific content unchanged. Project website: https://deemost…

Robot co-design couples morphology search with policy learning, yet training every new design from scratch discards acquired control experience. We present LACE-CRAFT, which compares continued learning on the current robot with policy adaptation to new morphology-reward pairs. LACE resumes the incumbent's full learning state and initializes compatible challengers with its actor parameters and observation statistics. A fixed task metric selects among both branches and the frozen incumbent. CRAFT coordinates Feedback, Morphology, Reward, and Integration roles through shared experimental records and behavioral replays to generate and cross-review paired proposals. A generative extension converts generated meshes into editable articulated models with configured joints, actuator interfaces, and consistently updated simulation assets. Across five locomotion benchmarks, mean scores over three evaluation seeds are 6.4-91.9% higher than D2C. Both methods train 30 new morphology-reward pairs over five rounds; LACE additionally uses four continuation training units. Five-task ablations examine policy inheritance and replay-derived feedback. A fabricated prototype demonstrates indoor walking and illustrates the geometry-to-hardware workflow.

0.33

Learning Highly Dynamic Skills Transition for Quadruped Jumping Through Constrained Space

cs.RO ·2026-08-20 ·Zeren Luo, Jiahui Zhang, Yimin Han, Ji Ma, Minghao Lu +2 more
published similarity 0.66
Abstract · 15 pages, 12 figures

Although legged animals are capable of performing explosive motions while traversing confined spaces, replicating this behavior in quadrupedal robots has been a longstanding challenge. Here, we propose a hierarchical reinforcement learning pipeline that empowers the robots to perform aggressive locomotion through constrained obstacles--a narrow gate. The imitation learning technique is used to train the low-level policy, which mimics the behaviors of real animals and forms a set of diverse skills. The high-level controller, having an awareness of the capability of low-level skills and acquiring the gate information via vision-based detection, determines the suitable maneuvers with collision-free trajectories to traverse it dynamically. Notably, we also verify that this framework can be extended to other highly dynamic tasks. This is one of the first works that perform autonomous and agile aerial gate traversal tasks on ground-walking robots, extending the lifelike agility of legged robots to match that of their biological counterparts.

0.59

GLAMDRING: Gait Learning And Morphology co-Design via Reinforcement LearnING of CPGs

cs.RO cs.LG ·2026-09-16 ·Amogh Joshi, Kaushik Roy
similarity 0.65
Abstract

Robots are moving out of the structured factory floor and into unstructured environments such as disaster sites, planetary surfaces, and agricultural fields, for which the right robot often does not yet exist. We present GLAMDRING, a framework that synthesizes the optimal robot for a locomotion task and, jointly, learns the controller that drives it. For the given specifications of forward-velocity bounds, a per-actuator power budget, an actuator library, and a payload requirement, GLAMDRING returns a matched quadruped morphology (link geometry and per-joint actuators) and a Hopf-oscillator Central Pattern Generator (CPG) gait policy. We rank feasible designs against a target design objective, viz., maximum speed, minimum Cost of Transport (CoT), or max Payload Margin. Because body and locomotion are coupled, the optimal morphology dictates how a robot is driven, while optimal gait depends on the physical body. We train a small number of CPG policies by reinforcement learning across the space of candidate morphologies, co-learning the gait with the underlying robot hardware. Link lengths and actuators are then resolved post-hoc from the policy's logged operating envelope, reducing synthesis cost to a small, fixed number of reinforcement-learning runs instead of one per candidate. Our experiments show three key findings: co-designing body and gait is necessary to satisfy locomotion constraints; actuator-envelope feasibility, rather than locomotion success alone, determines realizable payload capacity; and canonical animal gaits emerge naturally in most designs from morphology and constraints alone. A real-world demonstration further highlights the efficacy of our work.

0.24

PROMO: Preference-conditioned Multi-Objective Reinforcement Learning for Quadrupedal Robots

cs.RO cs.AIcs.HCcs.LG+1 ·2026-10-01 ·Amr Mousa, Rifny Rachman, Neil Karavis, Michele Caprio, Richard Allmendinger
code/data similarity 0.64
Abstract · Submitted to IEEE Transactions on Robotics. Project website, code, and videos: https://amrmousa.com/promo/

Quadrupedal locomotion requires balancing conflicting objectives such as command tracking, stability, and energy efficiency, yet conventional reinforcement learning (RL) hardcodes these priorities into a fixed scalar reward at training time. We present PROMO (Preference-Conditioned Multi-Objective Reinforcement Learning), a semantic multi-objective approach that makes this trade-off an explicit runtime input to a single locomotion policy. PROMO conditions the policy on deployment facing preferences while keeping embodiment-specific locomotion priors fixed, thereby separating operator intent from reward shaping terms required for viable gait generation. Compared with fixed-objective controllers, multi-objective baselines, and independently trained specialists, PROMO achieves objective specialization and robustness from a single deployable policy. Across 100 sampled preferences in simulation, 67 behaviors are non-dominated under exact Pareto dominance, with a mean preference-objective correlation of 0.843, demonstrating broad Pareto coverage and predictable preference response. The same policy transfers zero-shot to a Unitree Go2, where preference changes alone reduce specific energy by up to 30.4%, position error by 38.7%, and peak body-attitude deviation by 59.0% relative to the balanced preference. These results establish preference-conditioned multi-objective RL as a practical runtime interface for adaptive legged locomotion, extending its role beyond offline Pareto-set construction. Open-source code and videos are available at https://amrmousa.com/promo/.

0.33

Humanoid SRL: Augmenting Humanoids with Supernumerary Limbs for Coordinated Loco-Manipulation

cs.RO ·2026-10-19 ·Fukang Liu, Feiyang Wu, Paul Barsa, Jaehwi Jang, Akshat Jain +10 more
similarity 0.63
Abstract

Humanoid robots are envisioned to perform diverse human-level tasks through their anthropomorphic morphology. Their dual-arm configuration enables a broad range of everyday actions. Yet, as in humans, this morphology can constrain loco-manipulation when both arms are occupied or additional contacts are required beyond their reach. Supernumerary robotic limbs (SRLs) offer a way to extend these capabilities, but their integration requires the added limb to be coordinated with whole-body motion and balance. In this study, we develop and integrate a supernumerary arm into a humanoid platform to investigate how morphological augmentation reshapes its feasible action space. Through quantitative analysis and hardware experiments across two configurations, we show how the additional limb expands whole-body interaction capabilities by enabling manipulation and support to be coordinated beyond the constraints of the native dual-arm configuration. To control this augmented morphology, we leverage model-based trajectory optimization (TO) to generate dynamically feasible motions for goal-conditioned reinforcement learning (RL) controllers. The controllers are trained in simulation and transferred to hardware in a zero-shot manner, enabling coordinated whole-body skills for contact-rich tri-arm loco-manipulation. We further show vision-guided autonomous execution on selected tasks using diffusion policies trained from hardware demonstrations. Our findings suggest that humanoid morphology need not be restricted to human-like forms, but can be reimagined as an extensible design space for robotic augmentation.

0.17

Learning Multi-Phase Robot Loco-Manipulation via Phase-Conditioned Policy Optimization

cs.RO ·2026-10-26 ·Simone Manni, Annika Wollschläger, Dario Bellicoso, Abel Gawel, Marco Hutter +2 more
similarity 0.63
Abstract

Complex whole-body loco-manipulation requires executing diverse maneuvers, such as crouching, grasping, and locomotion, within a single long-horizon task. While performing simple pick-and-place behaviors is well-established, scaling to complex, long-horizon tasks remains difficult. Currently, this challenge is addressed by relying on human motion data and correspondingly humanoid platforms, which limits platform independence and introduces substantial data processing overhead. Instead, we extend proximal policy optimization (PPO) to train a single policy for multi-phase tasks across diverse robotic hardware, leveraging prior task structure to shape behavior. Our method adapts PPO using a phase-conditioned critic, phase-gated reward functions, and a multi-phase reset curriculum to guide exploration. To support varied hardware, we employ a decoupled hierarchical control architecture that separates lower-level balancing dynamics from high-level phase execution. We demonstrate multi-stage loco-manipulation skills on hardware on both the Unitree G1 and a Boston Dynamics Spot equipped with a manipulator arm, and validate our design choices through ablations. Our approach enables the acquisition of complex loco-manipulation behaviors purely through environment interaction while directly incorporating high-level task structure into policy learning.

0.17