CS Paper Radar

GeoTrussRover: Morphological Computation with Contact-Semantic Control Primitives

Muyuan Ma, Yi Zhang, Yang Yang, Xuanyan Zheng, Ruiqi Hu, Boxuan Ke, Zhenyu Chen, Yicong Lin, Xin Hao Yang, Daliang Xiao, Zhinan Hou, Wanhao Niu, Yuan Sun, Yan Yang, Yue Xie

cs.RO cs.GRcs.NEeess.SY ·submitted 2026-09-10 10:48 UTC · v1

Abstract

Reconfigurable robots can change their contact geometry when a fixed body cannot negotiate an obstacle. A variable-geometry truss (VGT) distributes this shape change through a load-bearing structure, but coupling it to a mobile base creates a high-dimensional coordination problem. GeoTrussRover combines an electrically actuated VGT, a wheeled base, and contact-semantic morphology planning and control. We solve one source traversal and extract four contact-semantic primitives that describe coordination among 21 members. Physics-constrained projection adapts them to unseen step heights with the same contact topology. When every phase remains feasible, adaptation does not recompute the complete motion. If one phase violates the new physical constraints, only that phase is recomputed. A full-space QP then tracks the adapted motion and corrects member and wheel errors. For transfer from 0.10m to 0.075m, the method reduces objective-function evaluations by 63.7% relative to full recomputation. Contact-phase feasibility analysis covers step heights from 0.10 to 0.46m, or 1.08 to 4.97 wheel radii, with the upper value near the theoretical feasible boundary. The electric prototype traverses 2.11 wheel radii. The resulting low-dimensional representation stores task coordination in a hyper-redundant, load-bearing morphology and reuses it during locomotion.

Closest papers

Nearest neighbours by meaning across the whole index.

Recompositional Robotics: Cross-Domain, Open-set, and Lifelong Modularity Beyond Morphology

cs.RO ·2026-09-29 ·Steven Swanbeck, Jonathan Salfity, Corrie Van Sice, Robert Blake Anderson, Mitch Pryor
published similarity 0.64
Abstract · 2026 IEEE/RSJ IROS Workshop on Reconfigurable Modular Robots

Research in modular robotics has produced capable approaches allowing a robot's morphology to change online, with recent efforts also developing approaches to decide which morphology to assume and automatically propagate that decision into the robot's motion planning and control. These approaches are powerful and increase adaptability in the field. However, an alternative objective is not to build robots whose structures can change, but robots whose fundamental capabilities can change, where capability is a joint function across several domains, including kino-dynamics, perception, compute, and high-level coordinating behaviors. A robot designed to be reconfigured across these domains has a greater capacity to alter its capability than one that can be reconfigured in a single domain. We refer to this cross-domain reconfigurability as integration span, and recognize a complementary measure of the resistance to reconfiguration, which we refer to as integration inertia. Current modular robots have reduced integration inertia in the structural domain while it remains high in the other domains that contribute to integration span. We assert that the systems that can provide the most utility through reconfiguration in practice are those maximizing span and minimizing inertia and call this general problem recompositional robotics: adaptation over a heterogeneous set of modules including hardware, software, compute, and behavior that abstracts each component by the interfaces it requires and provides such that they can be reasoned over holistically. We define the problem, ground it in two deployed systems and active research efforts, and pose open questions about the future of recompositional robotics.

0.28

Manipulation Feasible Navigation Among Movable Obstacles with Discrete Contact Pushing

cs.RO ·2026-09-20 ·Shaohu Wang, Aiguo Song, Yulong Yuan, Zhongyu Sun, Tianyuan Miao +1 more
code/datahot direction similarity 0.64
Abstract

In environments with large movable obstacles, detour-only navigation can be inefficient or even infeasible, while obstacle interaction requires reasoning about navigation benefit, feasible placement, and executable manipulation. We present a hierarchical navigation among movable obstacles (NAMO) framework for mobile manipulators. At the high level, the planner identifies key blocking obstacles from reference paths and searches for relocation plans that jointly satisfy geometric, manipulation, and downstream navigation constraints. When direct relocation is hindered by other movable objects, a large language model (LLM) is selectively invoked to infer auxiliary manipulation dependencies, which are then verified by deterministic geometric planning. To execute the resulting relocation goals, we define discrete contact modes on the surfaces of box-shaped obstacles and select contact faces and regions online based on position and orientation errors, enabling straight, side, and corner pushing through contact switching. A recurrent reinforcement-learning policy coordinates the mobile base and manipulator to track tool center point (TCP) targets while preserving end-effector reachability during sustained pushing. Simulation and real-robot experiments demonstrate feasible navigation-manipulation in detour, single- and multi-obstacle relocation, and dependency-constrained scenarios, validating the framework for interactive navigation with large non-graspable obstacles. The open-source project is available at https://cloudytosunny.github.io/NAMO_DCPushing/.

0.37

Contact as a Decision Variable: Capability-Tradeoff Contact Selection for Legged Loco-Manipulation

cs.RO ·2026-09-24 ·Al Jaber Mahmud, Shuai Li, Xuan Wang
similarity 0.61
Abstract · 9 pages, 6 figures

In this paper, we study the joint selection of an environmental support contact and a whole-body configuration for a prescribed loco-manipulation task. A contact may provide greater physical support while restricting the motion required for the task. We formulate this problem through three capability measures: residual wrench, end-effector reach, and base mobility available after satisfying the task requirements, and we balance them against contact acquisition cost. Evaluating these capabilities for every candidate requires repeated whole-body optimizations. To reduce this computational cost, we propose Capability-Tradeoff Contact Selection (CTCS). CTCS screens candidates for contact and task feasibility, groups similar candidates within each surface, and predicts their capabilities from exact anchor evaluations using local sensitivity analysis. It checks these predictions through selective exact evaluations, ranks candidates by capability, and evaluates a shortlist exactly for final selection. We evaluate CTCS in simulations and hardware experiments using a Unitree Go2 quadruped with an AgileX NERO arm across $392$ task conditions with nine available support surfaces. Results show that CTCS outperforms ground-only and fixed-contact support, as it can select support surfaces that provide favorable capability trade-offs for the task. Compared with evaluating every candidate exactly, CTCS achieves approximately $3\times$ speedup while closely matching the resulting mean objective value.

0.55

Morphology-Aware Human Motion Retargeting for Wheeled-Humanoid Loco-Manipulation

cs.RO ·2026-09-10 ·Chenbo Xia, Chao Ye
similarity 0.60
Abstract

Human-to-humanoid retargeting has largely been studied on legged platforms, while comparatively few wheeled-humanoid systems support coupled locomotion and manipulation from general human motion. Building on GMR's configurable general-motion retargeting and BeyondMimic's physically simulated R1 Pro learning framework, we present a reproducible pipeline that converts multi-dataset SMPLX motion into executable loco-manipulation behavior for the Galaxea R1 Pro wheeled humanoid. The robot has a planar three-wheel base, a serial torso, and two arms but no leg joints, so human lower-body motion must be redistributed across base motion and torso posture without sacrificing manipulation-relevant arm geometry. Our pipeline combines canonical body-shape preprocessing, planar-base normalization, morphology-aware differential inverse kinematics, shoulder-rooted hierarchical arm retargeting, and continuous torso substitution for bending and squatting. A reference-twist-driven planning layer then decodes planar base motion into continuous three-wheel steering and rolling commands subject to hysteresis, kinematic continuity, acceleration, and actuator-rate limits. Finally, a 21-dimensional BaseDecode policy is trained in Isaac Lab with directional joint-limit scaling, focused upper-body tracking, and a staged wheel-contact reward. The resulting system provides a complete bridge from human motion data to physically trackable wheeled-humanoid loco-manipulation rather than a visualization-only retargeter; quantitative policy comparisons remain scheduled for a later revision.

0.43

LEAP: Gradient Flow Augmented Lagrangian Trajectory Optimization for Contact Constrained Robots

cs.RO ·2026-10-14 ·César E. Ramos Chuquiure, Ryan Tsai, Yutong Zhou, Zihang Huang, Vansh Thakur +6 more
similarity 0.60
Abstract

Generating dynamically feasible motions for legged and manipulating robots requires solving a large, nonlinear, non-convex optimal control problem (OCP) in which contact wrenches must satisfy friction-cone constraints throughout the motion, not only at isolated instants. Existing solvers are sensitive to the initial guess and scale poorly with the number of joints. This paper introduces LEAP, which transcribes the OCP with pseudospectral collocation and, instead of a Newton or SQP solve, integrates a primal--dual gradient flow of a Powell--Hestenes--Rockafellar augmented Lagrangian to compute a solution. Because the flow is stiff, this paper designs a linearly implicit integrator with a Gauss--Newton metric, momentum, and a merit-based step controller that keeps the augmented Lagrangian monotone. Across locomotion benchmarks on five robot platforms, from planar hoppers to 32-joint humanoids, LEAP is the only method to solve every tested problem, achieves substantial speedups over Crocoddyl and Aligator on several benchmarks, and reaches trackable references at smaller compute budgets. The resulting trajectories are validated by tracking them in a high-fidelity simulator and on hardware. We will make the code public upon final acceptance of this paper.

0.24

Contact-Implicit Whole-Body Trajectory Optimization for Dynamic Humanoid Locomotion on Parameterizable Uneven Terrain

cs.RO ·2026-11-03 ·Roberto Mauceri, Stefano Dafarra, Giulio Romualdi, Marco Gabiccini, Daniele Pucci
top venue similarity 0.60
Abstract · Author-corrected version of the article published in IEEE Robotics and Automation Letters, vol. 10, no. 11, pp. 11674-11681, November 2025. …

This letter presents a trajectory planner for humanoid robots to perform dynamic motions on complex, parameterizable terrains using a contact-implicit whole-body optimization framework. The planner generates feasible movements without predefined contact sequences, considering the robot's full dynamics and kinematics. To plan bipedal locomotion on steps, ramps, and other terrains, we propose a mathematical model to approximate ground geometry with a smooth surface. The rigid interaction between the robot and the ground is modeled via novel contact constraints, extending the domain of applicability from flat and horizontal surfaces to any arbitrary smooth surface. Effectiveness is demonstrated using nonlinear programming to plan motions on various terrain topologies. We also explore dynamic trajectory generation by embedding high-level requirements in the cost function and the initial guess. Preliminary feasibility tests were conducted over non-coplanar terrains, both in simulation and on the real robot ErgoCub.

0.44

Online iLQR-MPC with Whole-Body Control for Robust Humanoid Locomotion

cs.RO ·2026-11-03 ·Xiang Li, Linlin Ou, Ruihan Wu, Xinyi Yu
similarity 0.59
Abstract

Humanoid locomotion requires deciding where to step and how to distribute contact forces. However, a disturbance can invalidate the nominal plan, requiring coordinated revision under constraints that switch with every footfall. To solve this online, the proposed approach employs the single-rigid-body model, which retains attitude dynamics and the full contact wrench. An iterative linear-quadratic-regulator MPC (iLQR-MPC) then jointly optimizes contact forces and footstep locations in a single receding-horizon problem, without a separate step planner. Specifically, contact and motion constraints are incorporated into the backward pass through augmented-Lagrangian and relaxed-barrier penalties. A whole-body controller subsequently maps the plan to joint torques at 500 Hz while preserving contact feasibility. The model-based formulation makes disturbance responses interpretable through explicit costs and constraints, and requires no platform-specific policy training. In MuJoCo simulations, the iLQR-MPC replans at 100 Hz (mean solve time 8.9 ms); the Unitree G1 sustains steady-state walking and recovers from impulsive 245 N forward and 175 N lateral pushes.

0.18

Close&Safe: Maximal Task Preservation for Redundant Manipulators via C-Space Boundary Detour

cs.RO ·2026-11-19 ·Abhigyan Singh, Manthan Goyal, Fares Abu-Dakka, Ravi Prakash
similarity 0.59
Abstract · Submitted to IEEE ICRA 2027

Contact-rich manipulation such as wiping, polishing and surface inspection specifies the task as a continuous end-effector trajectory rather than a goal pose. When an obstacle absent from the planning model intersects it, conventional planners return a collision-free path that may differ from the nominal throughout, discarding trajectory that was never obstructed. We present Close&Safe (Close to the intended task, Safe from obstacles), which decouples tracking from avoidance: the nominal is followed exactly wherever it remains feasible, and avoidance acts only on the interval where it is not, so tracking is hindered as little as the obstacle allows. On that interval we sample the configuration-space obstacle boundary within a corridor around the nominal, connect the samples into a roadmap, and search it for the detour that deviates least before rejoining the nominal at the earliest feasible configuration. We evaluate across diverse simulated obstacle configurations, physical Franka experiments, and ablations of key algorithmic components. The results demonstrate collision-free trajectory repair with localized task modification, while recovering 52.4-78% in simulation and on hardware.

0.26