CS Paper Radar

Contact as a Decision Variable: Capability-Tradeoff Contact Selection for Legged Loco-Manipulation

Al Jaber Mahmud, Shuai Li, Xuan Wang

cs.RO ·submitted 2026-09-24 17:08 UTC · v1

Abstract

In this paper, we study the joint selection of an environmental support contact and a whole-body configuration for a prescribed loco-manipulation task. A contact may provide greater physical support while restricting the motion required for the task. We formulate this problem through three capability measures: residual wrench, end-effector reach, and base mobility available after satisfying the task requirements, and we balance them against contact acquisition cost. Evaluating these capabilities for every candidate requires repeated whole-body optimizations. To reduce this computational cost, we propose Capability-Tradeoff Contact Selection (CTCS). CTCS screens candidates for contact and task feasibility, groups similar candidates within each surface, and predicts their capabilities from exact anchor evaluations using local sensitivity analysis. It checks these predictions through selective exact evaluations, ranks candidates by capability, and evaluates a shortlist exactly for final selection. We evaluate CTCS in simulations and hardware experiments using a Unitree Go2 quadruped with an AgileX NERO arm across $392$ task conditions with nine available support surfaces. Results show that CTCS outperforms ground-only and fixed-contact support, as it can select support surfaces that provide favorable capability trade-offs for the task. Compared with evaluating every candidate exactly, CTCS achieves approximately $3\times$ speedup while closely matching the resulting mean objective value.

Comment
9 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

LLM4Robot-Bench: How Far Can GPT-6 Astra Go in Robotic Manipulation? A Hierarchical, Paired Sim-Real Benchmark

cs.RO ·2026-10-25 ·Haibao Yu, Jiaqi Meng, Zijian Zhang, Bowen Jing, Lei Yang +14 more
benchmark similarity 0.65
Abstract · 31 pages, 11 figures. Renamed PhysLadder to LLM4Robot-Bench; minor text revisions

We introduce LLM4Robot-Bench, a hierarchical, paired Sim-Real benchmark for evaluating physical interaction capabilities in contact-rich manipulation. Its 16 household tasks span three cumulative levels: contact selection and geometric alignment (L1), force regulation within sustained contact (L2), and coordinated contact reconfiguration and force regulation (L3). Each task is instantiated in physically and visually matched simulated and real-world environments, with shared task definitions and success criteria. We evaluate GPT-6 Astra zero-shot with three trials per task in each environment. Real-world success rates decline from 80.0% at L1 to 47.6% at L2 and 0.0% at L3, with corresponding simulation rates of 66.7%, 47.6%, and 0.0%. Ten of the 16 tasks have identical success counts across environments; the remaining six differ by one success out of three trials. Across both environments, recurring difficulties in spatial reasoning, contact selection, force regulation, and coordination often prevent local physical progress from accumulating into task completion. These findings characterize Astra's observed capability boundary across increasing interaction demands and, for this model, support matched simulation as a repeatable, scalable testbed for studying the sustained, coordinated physical interactions that limit reliable manipulation.

0.11

Body-Grounded Replanning for Physically Adaptive Manipulation

cs.RO ·2026-09-24 ·Namiko Saito, Hiroshi Kera
similarity 0.65
Abstract

Manipulation requires not only reasoning about the external environment, but also about the robot's physical condition. A strategy may remain geometrically feasible while becoming physically unsuitable due to increased joint load or limited mobility, yet internal physical state is typically used only for low-level control. We propose body-grounded high-level replanning, which uses internal physical state to adapt manipulation strategies during execution. Body-state events trigger strategy replanning, and an LLM interprets the underlying joint-level state, recent execution statistics, and execution history to select a context-dependent alternative, while leaving the task objective and low-level controller unchanged. We evaluate the framework on a reaching task under controlled load and asymmetric mobility constraints in simulation and on a real robot. Our experiments show that body-grounded replanning maintains high task success while reducing physical effort and enabling more efficient strategy adaptation. Additional contact-rich manipulation experiments demonstrate the applicability of the same replanning interface beyond reaching. These results show that internal physical state can inform not only low-level control, but also high-level decisions about how a manipulation task should be performed.

0.27

LLA-MPPI: Rapidly Adaptive Whole-body Control of Legged Robots with GPU-Accelerated Parallel Simulations

cs.RO eess.SY ·2026-10-07 ·Sebin Jung, Maitham F. AL-Sunni, Juan Alvarez-Padilla, Zachary Manchester, Changliu Liu +1 more
code/data similarity 0.64
Abstract · The first two authors are co-first authors (contributed equally to the work)

Real-time whole-body controllers for legged robots typically plan through a fixed nominal model and degrade when the deployed dynamics change. Adaptive methods typically require a model structure that contact dynamics do not provide, or they need offline training for each anticipated condition. We present Look-back and Look-ahead Adaptive Model Predictive Path Integral control (LLA-MPPI). The method converts whole-body adaptation into selection over a bank of GPU-batched contact simulators with different physical or structural parameters. Windowed prediction errors select the simulator that best explains recent motion. A whole-body MPPI planner optimizes controls through the selected model. The framework requires no offline training, and its selected hypotheses are physically interpretable. Across four simulated tasks, it achieves 97.5% success while the strongest baseline reaches 74% and an oracle with the true model reaches 98.5%. Hardware validation on a Unitree Go2 shows the robot walking under a payload added mid-run, walking after one leg is disabled, and pushing a box to its goal while increasing its mass on the fly. Code, videos, and project details are available at: https://lla-control.github.io

0.29

HumanoidToolBench: Benchmarking Humanoid Tool Use from Selection to Mobile Execution

cs.RO cs.AI ·2026-10-01 ·Kyochul Jang, Seohyeon Park, Ohchul Kwon, Sangjun Park, Junhyeok Choi +7 more
benchmarkcode/datacommunity pick similarity 0.63
Abstract · 9 pages, 7 figures

As robotic hardware and learning methods advance, humanoids need tools to perform tasks beyond their inherent physical limits. Successful tool use requires selecting a suitable tool and coordinating manipulation and, when needed, locomotion to complete the task. Existing benchmarks do not jointly evaluate these capabilities on a humanoid. We introduce HumanoidToolBench, an 18-task benchmark spanning three scenarios, three execution levels, and two tool-set modes, together with ToolBook, a dataset of 3.1k demonstrations collected in simulation and on a real Unitree G1. Evaluation of seven policies in simulation and three on the real robot reveals substantial gaps between selecting a suitable tool and completing the task. Focused GR00T N1.7 probes show reduced selection accuracy on unseen tools and continued task execution under unrelated instructions. Code and data are available at https://snu-pi.github.io/HumanoidToolBench/.

0.36

Task-Driven Closed-Loop Design Optimization of Passively Morphing Quadrotors for Contact-Mediated Narrow Gap Traversal

cs.RO ·2026-11-06 ·Etor Arza, Luca Girardi, Gabriel Maquignaz, Javier Paez, Stefan Leutenegger +2 more
code/data similarity 0.63
Abstract · Video: https://youtu.be/xGkEtl6-vCA. Code: https://github.com/ntnu-arl/soft-quadrotor-optimization

Aerial robots operating in cluttered environments may encounter openings narrower than their nominal width. Existing passively morphing drones reduce their width upon traversal, but they typically involve human-made designs, which can struggle to find the right balance among folding ratio, flight efficiency, and control tracking performance. We introduce a closed-loop design method that jointly optimizes quadrotor geometry and the torque-deflection response of two passively folding arms driven by the success rate in simulation for contact-mediated gap traversal. An optimization algorithm samples candidate designs that are evaluated in a contact-based simulation of the traversal task, where the task success rate is used as a feedback signal to sample progressively better designs over time. The resulting prototype passively reduces its width from 31.3 to 14.1 cm and traverses a 15 cm wide opening at a 2 m/s reference speed. It also tolerates gap approach-angle errors of up to 30 degrees and folds through a 40 cm long confined passage. Compared to a rigid twin, the soft configuration adds only 2 mm of position RMSE and less than 1% electrical power during contact-free flight. These results show that task-driven closed-loop design optimization can produce passively morphing airframes that are compact under contact, tolerant to approach error, and effectively rigid during nominal flight.

0.28

Physical-Touch Observability from Wrist Wrench in Granular Scooping

cs.RO ·2026-09-19 ·Hongyi Lin, Song Zhang, Xubo Liu, Yang Liu
similarity 0.62
Abstract

Mining and earthmoving are important real-world deployment settings for embodied intelligence. Autonomous transport and driving systems have improved substantially, but loading and scooping still often depend on skilled human operators, exposing personnel and equipment to operational risk. For robotic scooping, pre-contact RGB-D sensing reveals surface geometry but not the resistance, compaction, tool engagement, or load transfer that emerge during interaction. We test whether the current scoop's six-axis wrist force/torque (F/T), or wrist wrench, contains information about final collected volume, and whether that information depends on the correctly paired action-terrain interaction. We call this property physical-touch observability. Using 6,700 real-robot scoops across 67 terrains, we evaluate correctly paired current-scoop F/T against pre-contact prediction and correspondence-breaking controls under terrain-held-out testing. At the retrospective 60% sequence boundary, correctly paired F/T reduces mean absolute error by 14.2% relative to Action-only and by 21.9% relative to cross-terrain mismatched F/T. Engineered signal summaries reproduce the result across model architectures. Together, these findings position wrist wrench not merely as a low-level feedback signal, but as a task-level perceptual modality through which embodied robots can infer hidden physical states during interaction, providing a foundation for response-aware autonomy in mining and other contact-rich tasks.

0.23

Contact-Rich Motion Planning via GPU-Parallel Mode Evaluation

cs.RO ·2026-09-18 ·Jiayun Li, Georgia Chalvatzaki
similarity 0.62
Abstract

Contact-rich motion planning (CRMP) is essential for robotic manipulation and locomotion, yet remains computationally challenging due to combinatorial contact decisions. Existing methods typically avoid broad evaluation of contact-mode sequences through search heuristics or optimization reformulations. We revisit broad evaluation in light of modern GPU hardware and introduce Contact-Mode Expansion with parallel Trajectory optimization (CoMET), which combines GPU-parallel trajectory evaluation with greedy contact-mode expansion. On planar pushing benchmarks, CoMET is competitive with optimization-based, sampling, and tree-search baselines in solution quality and planning time, matching the full-enumeration reference on nearly all instances with fewer evaluations and shorter planning times. Ablations suggest that much of the performance gain comes from the high-throughput trajectory evaluator. In bimanual nonprehensile manipulation, GPU-friendly local mode expansion achieves higher planning success than the tested adaptive tree search as the mode space grows. These results demonstrate that broad explicit mode evaluation provides a simple yet effective alternative for CRMP.

0.25

Autonomous Whole-body Loco-manipulation Using a Snake Robot

cs.RO eess.SY ·2026-11-06 ·Adarsh Salagame, Henry Noyes, Haroon Hublikar, Alireza Ramezani
published similarity 0.62
Abstract · Presented in IROS 2026

Snake robots can leverage their hyper-redundant morphology for both locomotion and manipulation through distributed body contact but whole-body loco-manipulation is particularly challenging since the entire body serves simultaneously as propulsive mechanism and manipulation tool Prior work on wheeled legged and snake robot platforms has decoupled these functions through dedicated appendages body segmentation or grippers We present closed-loop loco-manipulation with our snake robot COBRA without this distinction such that any part of the body may make contact We develop a contact-implicit dynamic model unifying robot-ground robot-object and object-ground interactions within a Moreau-Jean time-stepping framework and formulate a trajectory optimization over the full-order dynamics guided by a geometric planner and nominal proportional controller to autonomously push an object to a goal location during sidewinding We validate the planner and controller on hardware across varied configurations and present simulation results for a simplified trajectory optimization that resolves robot-object and object-ground contacts

0.31