CS Paper Radar

Physical-Touch Observability from Wrist Wrench in Granular Scooping

Hongyi Lin, Song Zhang, Xubo Liu, Yang Liu

cs.RO ·submitted 2026-09-19 07:47 UTC · v1

Abstract

Mining and earthmoving are important real-world deployment settings for embodied intelligence. Autonomous transport and driving systems have improved substantially, but loading and scooping still often depend on skilled human operators, exposing personnel and equipment to operational risk. For robotic scooping, pre-contact RGB-D sensing reveals surface geometry but not the resistance, compaction, tool engagement, or load transfer that emerge during interaction. We test whether the current scoop's six-axis wrist force/torque (F/T), or wrist wrench, contains information about final collected volume, and whether that information depends on the correctly paired action-terrain interaction. We call this property physical-touch observability. Using 6,700 real-robot scoops across 67 terrains, we evaluate correctly paired current-scoop F/T against pre-contact prediction and correspondence-breaking controls under terrain-held-out testing. At the retrospective 60% sequence boundary, correctly paired F/T reduces mean absolute error by 14.2% relative to Action-only and by 21.9% relative to cross-terrain mismatched F/T. Engineered signal summaries reproduce the result across model architectures. Together, these findings position wrist wrench not merely as a low-level feedback signal, but as a task-level perceptual modality through which embodied robots can infer hidden physical states during interaction, providing a foundation for response-aware autonomy in mining and other contact-rich tasks.

Closest papers

Nearest neighbours by meaning across the whole index.

FWBC-VLA: Force-Aware Whole-Body Compensation for Contact-Rich Loco-Manipulation

cs.RO cs.AI ·2026-09-03 ·Yutian Zhang, Siyuan Ma, Liwen Yang, Yang Li, Ce Hao +4 more
similarity 0.68
Abstract · 9 pages, 6 figures

Contact-rich loco-manipulation requires a bridge between semantic action generation and physical interaction control. Existing Vision-language-action (VLA) models generate task-level actions from visual and linguistic observations, but cannot interpret the physical interactions induced by those actions. While the whole-body control (WBC) policy can stabilize the robot, it cannot distinguish task-relevant interaction forces from forces induced by external disturbances during manipulation. Although force/torque sensors provide direct measurements of physical interactions, retrofitting them entails additional hardware costs and substantial integration effort, particularly for platforms not designed with sensor integration in mind. To address this problem, we propose FWBC-VLA, a force-aware framework that bridges task-level VLA action generation and low-level whole-body compensation control for wheeled-legged robots. First, we introduce HSR-Force, a sensorless residual-torque estimator for inferring contact strength and its temporal variation. These contact estimates are then encoded as tokens and injected into the VLA action expert during action decoding, enabling the policy to perceive contact onset, sustained loading, and release. For loco-manipulation tasks, all parameters of the pretrained VLA backbone are fine-tuned on our WL\&Arm Dataset, which comprises more than 5,000 episodes. Moreover, the robot's proprioceptive state, the Jacobian-derived body-frame force estimate, and the estimated contact state are jointly fed into a compensation generator to produce corrective actions. The manipulation-centric actions are subsequently combined with the corrective actions and passed to the WBC policy for execution. Real-world experiments on whiteboard wiping and door opening with a door closer demonstrate the effectiveness of our FWBC-VLA in contact-rich loco-manipulation.

0.46

ZeroTouch: Tactile-Supervised Visual Contact Estimation for Contact-Rich Manipulation

cs.RO ·2026-09-18 ·Dmitriy Kosenkov, Daniia Zinniatullina, Miguel Altamirano Cabrera, Iana Zhura, Mikhail Derevianchenko +1 more
similarity 0.68
Abstract

Reliable robotic grasping benefits from estimating the evolving physical interaction and selecting a grasp-dependent compression target. Tactile sensors provide direct interaction measurements but require dedicated hardware at deployment. We introduce ZeroTouch, a tactile-supervised framework that predicts dense contact deformation, the instantaneous six-axis wrench, and a grasp-dependent desired compression target from wrist RGB observations, gripper state, and local gravity direction. Tactile measurements are used only as privileged supervision during training and are not required at deployment. On the full validation set, the complete architecture reduces normal-force MAE from 2.017 N for a state-only baseline to 0.531 N. In physical evaluation with 20 trials per condition, ZeroTouch achieves 95% success on an unseen object, 80% in a seen-object/unseen-grasp condition, and 90% under a content/load shift. Under the same evaluation protocol, OpenVLA achieves 25%, 40%, and 55%, while SmolVLA achieves 10%, 25%, and 35%, respectively.

0.20

DexRemo: A Force-Sensing Hand Platform and Task Suite for Contact-Rich Removal Manipulation

cs.RO cs.LG ·2026-11-11 ·Liman Wang, Hanyang Zhong, Sun Zhaole, Wenting Cao, Babar Jamil +3 more
publishedbenchmark similarity 0.67
Abstract · Accepted for publication in IEEE Transactions on Robotics (T-RO), 2026. Project website: https://dexremo.github.io

Many manipulation tasks require separating adhered, embedded, contaminated, or mechanically constrained targets. We study this setting as removal manipulation, where progress depends on evolving contact states that are only partially observable from vision and kinematics. We introduce DexRemo, a three-finger robotic hand with high-force actuation, modular fingertips, and three-axis fingertip force sensing, together with a nine-scenario real-robot task suite spanning adhesive detachment, surface cleaning and self-cleaning, and occluded retrieval. To make multi-finger force observations easier to fuse, we express fingertip forces in a shared wrist-centered frame, giving force components consistent geometric meaning across fingers and time. Using an Action Chunking Transformer backbone, policies fuse multi-view vision, proprioception, fingertip pose, and force observations to predict closed-loop action chunks from demonstrations. Evaluation uses six core benchmark tasks for controlled fingertip-input and force-frame ablations, plus three extension scenarios for additional held-out coverage. Across these evaluations, the learned policies achieve consistent removal performance, and ablations show that wrist-frame forces, especially with fingertip pose, improve stability and generalization over local-frame force inputs and no-force baselines. Project website: https://dexremo.github.io

0.24

Dexterous Robotic Hands in the Foundation-Model Era: A Full-Stack Survey of Hardware, Data, Cross-Embodiment Transfer, Learning, and Evaluation

cs.RO cs.AIcs.CVcs.LG ·2026-11-04 ·Ji Pei
survey similarity 0.67
Abstract · 45 pages, 8 figures, 21 tables. Structured narrative review of hardware, data, cross-embodiment transfer, foundation models, tactile sensing…

Dexterous robotic hands are increasingly coupled to large-scale human data and foundation models, yet progress in hardware, representation learning and evaluation is often assessed separately. This survey reviews work from January 2024 to early November 2026, with earlier studies included to establish technical lineages. We organize the literature into five interdependent layers: hardware; data collection and curation; cross-embodiment transfer; learning and foundation models; and evaluation and applications. Human hand-object understanding and tactile sensing provide two cross-cutting perspectives. A system-level architecture, comparative tables and five case analyses connect design choices across these layers. We distinguish within-study experimental comparisons from heterogeneous corpus statistics, vendor specifications and company-reported results. Three conclusions emerge. First, the value of human data depends on kinematic, visual and contact alignment, not recording volume alone. Second, shared action representations and foundation policies do not remove embodiment-specific constraints on force, latency and contact. Third, task completion is insufficient to establish physical correctness or deployment readiness. Evidence remains limited for zero-shot transfer of contact-rich skills between morphologically different hands, long-duration reliability, and cross-sensor tactile generalization. We identify eleven open problems and propose reporting interfaces and controlled comparisons that can make full-stack progress more measurable. The review is a structured narrative synthesis rather than a pooled performance ranking or an exhaustive systematic review.

0.15

GIFT: Glove-Inferred Force Transfer: Force-Aware Human-to-Robot Skill Transfer from a Wearable Sensing Glove to a Robot Hand Without Tactile Sensors

cs.RO ·2026-09-12 ·Tzach Sarusi
code/data similarity 0.66
Abstract · 7 pages, 5 figures, 1 table. Project page: https://tzahsarusi.github.io

Human-to-robot skill transfer from sensing gloves has so far relied on shared hardware: the same tactile glove worn by the demonstrator and the robot, or a learned alignment between two tactile sensors. We present GIFT (Glove-Inferred Force Transfer), a pipeline in which the interface between human and robot is a physical unit rather than a shared sensor: fingertip force is measured in newtons on the human side and estimated in newtons on the robot side. A wearable glove records finger flexion, calibrated fingertip force, and wrist orientation, while a head-mounted camera records the demonstration; no robot is present. At deployment, the robot estimates force from actuator-current residuals relative to a free-space baseline, through a calibrated mapping to newtons, so any position-controlled hand that reports motor current can serve as the deployment platform. The policy uses a glove-space state and predicts finger-position targets; the robot enters only through two calibrated adapters, a retargeting decoder and a force estimator. We evaluate GIFT on a cup grasp-and-hold task with two action-chunking policies trained on the same demonstrations, with fingertip-force inputs retained in one and zeroed in the other. In a 50-rollout evaluation with sample size and metrics fixed before scoring, both policies succeeded in all 25 rollouts. The median of the per-rollout hold-phase grip-force estimates was 53% lower with force inputs: 1.20 N versus 2.55 N (one-sided Mann-Whitney U, p<0.0001). In an observation ablation, a vision-only policy achieved 0/15 grasps, policies given hand-command state acquired the grasp, and the force inputs determined how hard the policy held. A force channel measured on the human hand thus transfers to a robot hand with no tactile hardware, through a retargeting map from five glove channels to seven robot actuators, with no sensor shared between the two.

0.32

Tactus: Tactile & Pose Sensing Glove for Natural Dexterity Data Collection

cs.RO cs.AIcs.ARcs.LG ·2026-10-29 ·Li Guan, Rachael Granberry, Sahar Aseeri, Sahar Rostami, Taylor Niehues +99 more
similarity 0.66
Abstract · 9 pages

Collecting naturalistic human manipulation demonstrations with accurate contact force and hand pose is essential for robot dexterous manipulation policy and foundational world model learning - yet no existing wearable platform provides both calibrated fingertip force sensing and occlusion-resilient hand tracking in a form factor that preserves natural manipulation behavior. We present Tactus, a textile-integrated sensing glove that co-optimizes three design pillars: (1) a thin, conformal 3D-knit form factor (1.5 mm fingertip stackup) designed to minimize interference with natural manipulation, (2) strategically placed capacitive tactile sensors at manipulation-relevant regions informed by empirical contact studies, and (3) IMU-fused pose tracking that maintains accuracy through the hand-object occlusions where manipulation data is most valuable. Tactus includes a documented calibration pipeline for cross-glove consistency and per-session calibration for subject-dependent correction. To enable objective comparison, we introduce standardized benchmarking protocols for tactile force regression and hand pose estimation, and apply them to Tactus and two commercially available tactile gloves - to our knowledge the first quantitative cross-platform evaluation of this kind. Tactus resolves a minimum detectable force of 0.59 N at 95% confidence, 1.6 - 2.7x lower than the commercial baselines, and with 0.87 cross-participant consistency, while our pose tracking sustains 11.0 mm fingertip keypoint relative error during manipulation, when occlusion is heaviest. We show that these combined signals support object property estimation, slip detection, and representative recording of hand-object interaction - yielding demonstration data with the fidelity required for contact-aware manipulation policies and world models.

0.21

TaF-Foundation: Wrench-Grounded Cross-Sensor Tactile Representations

cs.RO ·2026-11-16 ·Jiaming Jiang, Yuzhe Huang, Baokun Yang, Hao Liang, Li Gao +6 more
benchmarkcode/data similarity 0.65
Abstract · 17 pages, 6 figures, including supplementary material

Tactile sensing is essential for contact-rich manipulation, yet heterogeneous sensing mechanisms and observation formats hinder cross-hardware transfer. Since physical contact is governed by Newtonian mechanics, we ground tactile representations in six-dimensional wrenches, establishing a common physical reference across sensing mechanisms. Specifically, we pair tactile observations from all sensors with wrench measurements, enabling shared physical supervision without requiring direct tactile-to-tactile pairing between sensors. To support learning at scale, we develop a dedicated acquisition platform and collect over 100 million paired tactile observations and wrench measurements from 24 sensors spanning four families of sensing principles. Building on this dataset, our framework combines sensor-specific input adaptation with a shared tactile encoder. By learning to reconstruct wrenches, the encoder maps observations from different sensors into a shared, continuous feature space grounded in contact physics. To leverage these representations for manipulation, we introduce TaF-Policy, which integrates tactile features with visual observations and robot states to generate action chunks. We evaluate the learned representations through wrench estimation, cross-sensor retrieval, few-shot adaptation to unseen sensors, and robotic manipulation. On the core benchmark, our method reduces single-frame force RMSE by 17.1% and improves cross-sensor retrieval R@1 by 13.11 percentage points over the strongest baseline. In manipulation experiments, TaF-Policy achieves average success rates of 51.33% across three simulated tasks and 46.25% across four real-world tasks, compared with 47.33% and 23.75%, respectively, for the strongest baselines evaluated on the same task sets. Project page: https://mrjiangjm.github.io/TaF-Foundation/.

0.35

HapticWorld: an Interactive World Simulator with Real-time Torque Feedback

cs.RO ·2026-09-25 ·Shaoting Peng, Litian Liang, Yixuan Wang, Ming Yang, Katherine Driggs-Campbell +2 more
theory similarity 0.65
Abstract · Project webpage: https://haptic-world.github.io/

Contact-rich manipulation depends on force sensing that is hard to infer from visual signals alone, both for collecting demonstrations and for training policies. Force-annotated data, however, remains hard to obtain at scale: real-robot collection ties every demonstration to physical hardware, physics simulators report contact forces that deviate systematically from real measurements, and learned world simulators, though scalable and realistic, are vision-only, so operators feel nothing during data collection and the data carries no force/torque (F/T) labels. We present HapticWorld, an interactive world simulator that predicts joint torque together with observations and renders it back to the operator in real time, closing the haptic loop between a human and a learned world model. Across three contact-rich tasks, torque feedback raises data collection throughput by 1.6 times on average. Policies trained on HapticWorld-generated demonstrations succeed in 54/60 real-world trials, approaching the 56/60 upper bound of real-world data, and far exceeding the 19/60 success rate of the vision-only baseline. Moreover, the success rates measured inside HapticWorld closely match real-world evaluation, demonstrating that HapticWorld can serve as a stand-alone F/T-conditioned policy evaluation platform.

0.29