CS Paper Radar

LLA-MPPI: Rapidly Adaptive Whole-body Control of Legged Robots with GPU-Accelerated Parallel Simulations

Sebin Jung, Maitham F. AL-Sunni, Juan Alvarez-Padilla, Zachary Manchester, Changliu Liu, John M. Dolan

cs.RO eess.SY ·submitted 2026-10-07 17:30 UTC · v1
code/data

Abstract

Real-time whole-body controllers for legged robots typically plan through a fixed nominal model and degrade when the deployed dynamics change. Adaptive methods typically require a model structure that contact dynamics do not provide, or they need offline training for each anticipated condition. We present Look-back and Look-ahead Adaptive Model Predictive Path Integral control (LLA-MPPI). The method converts whole-body adaptation into selection over a bank of GPU-batched contact simulators with different physical or structural parameters. Windowed prediction errors select the simulator that best explains recent motion. A whole-body MPPI planner optimizes controls through the selected model. The framework requires no offline training, and its selected hypotheses are physically interpretable. Across four simulated tasks, it achieves 97.5% success while the strongest baseline reaches 74% and an oracle with the true model reaches 98.5%. Hardware validation on a Unitree Go2 shows the robot walking under a payload added mid-run, walking after one leg is disabled, and pushing a box to its goal while increasing its mass on the fly. Code, videos, and project details are available at: https://lla-control.github.io

Comment
The first two authors are co-first authors (contributed equally to the work)

Closest papers

Nearest neighbours by meaning across the whole index.

Adaptive-MHE : A Sampling-Based Adaptive MPC for Legged Loco-Manipulation via Moving Horizon Estimation

cs.RO ·2026-09-15 ·Hossein Keshavarz, Alejandro Ramirez-Serrano, Majid Khadiv
similarity 0.74
Abstract

Legged robots have demonstrated a remarkable ability to traverse various terrains, yet generating effective loco-manipulation behaviors remains challenging. A key difficulty is that object and terrain parameters are typically unknown to the robot, and mismatches between these parameters and their simulated counterparts introduce a sim-to-real gap that degrades control performance. Classical system identification (Sys-ID) methods often assume differentiable dynamics, an assumption that does not hold for contact-rich legged systems. Sampling-based Sys-ID avoids this restriction by directly matching simulated and recorded state trajectories through massively parallel rollouts, but existing approaches are typically applied offline and do not adapt as environmental conditions change. We present Adaptive-MHE an online sampling-based Sys-ID framework, based on moving horizon estimation (MHE), that estimates the physical parameters of objects and terrain in the environment (e.g., mass, friction) and couples this estimate with a sampling-based model predictive controller, enabling adaptive loco-manipulation in changing and uncertain environments. In simulation and hardware experiments, our framework consistently outperforms baselines and matches the performance of a controller with access to ground-truth parameters.

0.26

Dense Temporal Motion Retargeting for Legged Robots

cs.RO ·2026-09-29 ·Jaeryeong Kim, Taerim Yoon, Jin Cheng, Sungjoon Choi, Stelian Coros
code/data similarity 0.74
Abstract · 8 pages, 7 figures, 6 tables. Project page: https://jaeryeongnicolekim.com/Dense-Temporal-Motion-Retargeting-For-Legged-Robots/

Legged robots can learn expressive whole-body skills from the motions of humans and animals. Due to the morphology gap between the source and the robot, however, the motion must be tailored to the dynamic properties of the robot. In particular, dynamic motions such as a jump require careful adjustment, since their timing and control are interdependent. We propose dense temporal motion retargeting (DTMR), which jointly optimizes timing and control within a single optimization, where dense means that the timing is adjusted for every control step. This dense formulation enables DTMR to deform only the parts of the motion that need a change in timing. The problem is solved with sampling-based model predictive control (MPC) in parallel on a GPU. We evaluate DTMR against baselines on two hours of human motion with four humanoid robots, where the results show that DTMR outperforms baseline methods, particularly on dynamic motions. We also show that allowing more temporal deformation yields more precise retargeting. We further compare DTMR with a baseline that optimizes the temporal dimension, where the result shows that DTMR retargets more precisely under the same deformation budget while being ~19x faster. Lastly, policies trained on our references transfer to a real humanoid robot.

0.35

ReCo: Response-Consistent Locomotion with Policy-Aware MPC for Legged Manipulation

cs.RO ·2026-10-01 ·Kuankuan Sima, Yichao Gao, Chenxi Gu, Kefan Zhao, Lin Zhao
benchmark similarity 0.74
Abstract

Continuous legged manipulation requires accurate end-effector tracking while the base keeps walking. Combining reinforcement learning (RL) with model predictive control (MPC) suits this task: the learned policy provides robust locomotion, while MPC coordinates the base and arm to compensate for tracking errors. However, MPC can compensate only for base motion that it can predict, and a learned policy's command response varies with gait phase, contact, and payload. We present ReCo, a framework that couples response-consistent locomotion with policy-aware MPC for legged manipulation. Response shaping trains the policy to respond to commands consistently and repeatably across randomized dynamics. An identified closed-loop response model then lets MPC jointly plan locomotion commands and arm motion. On the simulation benchmark, ReCo reduces position and orientation root-mean-square error (RMSE) by 28.7% and 27.4% relative to the best baseline for each metric. Real-world experiments demonstrate onboard continuous legged manipulation with coordinated base and arm motion.

0.17

EIDA: Execution-Interface Dynamics Adaptation for Real-to-Sim-to-Real Robot Navigation

cs.RO ·2026-10-01 ·Yiwei Qian, Shanze Wang, Qingyuan Hu, Xinming Zhang, Wei Zhang
benchmark similarity 0.72
Abstract · 8 pages, 7 figures, 3 tables

Simulation-to-robot transfer can fail when velocity commands produce motion and feedback that differ from those modeled during policy training. We present execution-interface dynamics adaptation (EIDA), which fits these responses from target-platform execution data without reconstructing actuator dynamics. A model of body-frame pose increments updates simulator geometry, while a separate model predicts the velocity feedback observed by the policy; a short history of velocity feedback is included in the policy input. The fitted models are used within a lightweight GPU-parallel simulator. On the full Jackal and Go2 validation sets, the fitted models reduced position and yaw prediction errors relative to the simulator's predefined motion model. Across 100 benchmark navigation environments evaluated in a separate physics-based simulator, EIDA achieved the highest success rate and navigation score among the compared learned policies, both with and without global guidance. Feedback ablations further supported the need to match policy-facing velocity estimates. On a physical Unitree Go2, EIDA reached the goal without collision in all 20 static-scene trials, compared with 4 of 20 for the baseline. These results show that execution-interface adaptation can improve navigation transfer without detailed actuator simulation.

0.44

Planning to Learn: Real-Time Robust Adaptive Control on the GPU with Guaranteed Future Learning

cs.RO cs.LGeess.SYmath.OC ·2026-10-14 ·Anutam Srinivasan, Siddhant Panse, Glen Chou
similarity 0.69
Abstract

Robust adaptive control is vital for keeping robots safe while actively reducing uncertainty in unfamiliar settings. However, traditional methods are often conservative since they fail to account for guaranteed future parameter learning during planning and struggle to scale to high-dimensional systems. In this work, we present A-SLS, a learning-aware robust adaptive model predictive control (RAMPC) framework based on system-level synthesis. A-SLS forecasts future parameter uncertainty and preserves correlations between process disturbances, parameter error, and estimate updates to construct tight, guaranteed reachable sets that account for future information gain. We also develop a GPU-accelerated A-SLS solver to enable real-time performance. Across nonlinear robotic systems, A-SLS reduces reachable-tube conservativeness, maintains real-time performance, and scales to whole-body control for a quadruped with 61 states, 8 uncertain parameters, and 12 control inputs. We further demonstrate the approach on hardware, where a physical Crazyflie drone learns an uncertain dynamics parameter online to stabilize on the fly.

0.26

Online iLQR-MPC with Whole-Body Control for Robust Humanoid Locomotion

cs.RO ·2026-11-03 ·Xiang Li, Linlin Ou, Ruihan Wu, Xinyi Yu
similarity 0.69
Abstract

Humanoid locomotion requires deciding where to step and how to distribute contact forces. However, a disturbance can invalidate the nominal plan, requiring coordinated revision under constraints that switch with every footfall. To solve this online, the proposed approach employs the single-rigid-body model, which retains attitude dynamics and the full contact wrench. An iterative linear-quadratic-regulator MPC (iLQR-MPC) then jointly optimizes contact forces and footstep locations in a single receding-horizon problem, without a separate step planner. Specifically, contact and motion constraints are incorporated into the backward pass through augmented-Lagrangian and relaxed-barrier penalties. A whole-body controller subsequently maps the plan to joint torques at 500 Hz while preserving contact feasibility. The model-based formulation makes disturbance responses interpretable through explicit costs and constraints, and requires no platform-specific policy training. In MuJoCo simulations, the iLQR-MPC replans at 100 Hz (mean solve time 8.9 ms); the Unitree G1 sustains steady-state walking and recovers from impulsive 245 N forward and 175 N lateral pushes.

0.18

CQDC-Warp: GPU-Accelerated Differentiable Quasi-Dynamic Simulation for Contact-Rich Manipulation

cs.RO ·2026-10-15 ·Yanchen Ding, Jiayi Chen, Jianfeng Xu, Wei Zhao, Li Yi +1 more
benchmark similarity 0.69
Abstract

Efficient synthesis of contact-rich manipulation trajectories is essential for downstream robot learning. Gradient-based planning offers a promising approach, but jointly optimizing motion and contact decisions remains challenging. Meanwhile, many existing planners run on CPUs with limited throughput. We present CQDC-Warp, a GPU-accelerated differentiable quasi-dynamic simulator for batched model predictive control (MPC). We use it to study contact-guided trajectory optimization, in which intended robot--object contacts are specified before planning and encouraged through soft costs, while the simulated dynamics determine contact geometry and frictional response without a prescribed contact-mode schedule. Across $17{,}408$ trials on the $17$-object Allegro in-hand rotation benchmark, our framework achieves $79.8\%$ success, compared with $73.7\%$ for CFree and $65.2\%$ for IMPACT, and reduces mean trajectory-generation time by factors of $27.0$ and $50.2$, respectively. On a single NVIDIA RTX 4090 with $2{,}048$ parallel worlds, forward and backward throughput reach $2.06\times10^5$ and $2.25\times10^5$ world-steps per second, respectively. Further experiments cover manipulation with LEAP and Shadow hands, environmental contact exploitation, bimanual manipulation, whole-body control, and real-world trajectory replay on a Sharpa hand.

0.12

Do My Samples Help? Compute Budget Allocation for Real-World Sampling-Based MPC in Contact-Rich Manipulation

cs.RO ·2026-10-07 ·Magnus Dierking, João Carvalho, Vince Kurtz, Jan Peters, Nils Dengler +1 more
similarity 0.69
Abstract

Sampling-based model predictive control (SMPC) is increasingly practical for contact-rich manipulation because GPU-based physics simulators enable real-time evaluation of large numbers of non-differentiable contact rollouts. However, this computation budget is finite and can be spent in competing ways, including denser control exploration, representing dynamics or state uncertainty, replanning more frequently, or aligning the simulation better with the physical state. Yet, the resulting trade-offs are not well understood in real-world sim-to-real control. In this work, we address this question through a systematic study of how to allocate a fixed computation budget for SMPC in contact-rich manipulation. To enable controlled comparisons, we develop a GPU-based framework named Budget-Allocating Model Predictive Control (BAMPC), which runs on MuJoCo Warp and exposes dynamics uncertainty, state uncertainty, and temporal alignment as independent dimensions of the computation budget while using the same control stack in simulation and on a real robot. Across three contact-rich manipulation tasks, we find that the best budget allocation depends on the dominant sim-to-real error, with dynamics randomization not universally the most effective one.

0.18