CS Paper Radar

Dense Temporal Motion Retargeting for Legged Robots

Jaeryeong Kim, Taerim Yoon, Jin Cheng, Sungjoon Choi, Stelian Coros

cs.RO ·submitted 2026-09-29 22:21 UTC · v1
code/data

Abstract

Legged robots can learn expressive whole-body skills from the motions of humans and animals. Due to the morphology gap between the source and the robot, however, the motion must be tailored to the dynamic properties of the robot. In particular, dynamic motions such as a jump require careful adjustment, since their timing and control are interdependent. We propose dense temporal motion retargeting (DTMR), which jointly optimizes timing and control within a single optimization, where dense means that the timing is adjusted for every control step. This dense formulation enables DTMR to deform only the parts of the motion that need a change in timing. The problem is solved with sampling-based model predictive control (MPC) in parallel on a GPU. We evaluate DTMR against baselines on two hours of human motion with four humanoid robots, where the results show that DTMR outperforms baseline methods, particularly on dynamic motions. We also show that allowing more temporal deformation yields more precise retargeting. We further compare DTMR with a baseline that optimizes the temporal dimension, where the result shows that DTMR retargets more precisely under the same deformation budget while being ~19x faster. Lastly, policies trained on our references transfer to a real humanoid robot.

Comment
8 pages, 7 figures, 6 tables. Project page: https://jaeryeongnicolekim.com/Dense-Temporal-Motion-Retargeting-For-Legged-Robots/

Closest papers

Nearest neighbours by meaning across the whole index.

LLA-MPPI: Rapidly Adaptive Whole-body Control of Legged Robots with GPU-Accelerated Parallel Simulations

cs.RO eess.SY ·2026-10-07 ·Sebin Jung, Maitham F. AL-Sunni, Juan Alvarez-Padilla, Zachary Manchester, Changliu Liu +1 more
code/data similarity 0.74
Abstract · The first two authors are co-first authors (contributed equally to the work)

Real-time whole-body controllers for legged robots typically plan through a fixed nominal model and degrade when the deployed dynamics change. Adaptive methods typically require a model structure that contact dynamics do not provide, or they need offline training for each anticipated condition. We present Look-back and Look-ahead Adaptive Model Predictive Path Integral control (LLA-MPPI). The method converts whole-body adaptation into selection over a bank of GPU-batched contact simulators with different physical or structural parameters. Windowed prediction errors select the simulator that best explains recent motion. A whole-body MPPI planner optimizes controls through the selected model. The framework requires no offline training, and its selected hypotheses are physically interpretable. Across four simulated tasks, it achieves 97.5% success while the strongest baseline reaches 74% and an oracle with the true model reaches 98.5%. Hardware validation on a Unitree Go2 shows the robot walking under a payload added mid-run, walking after one leg is disabled, and pushing a box to its goal while increasing its mass on the fly. Code, videos, and project details are available at: https://lla-control.github.io

0.29

Fast Motion Retargeting Pipeline for Scalable Humanoid Robot Learning

cs.RO ·2026-10-20 ·Daniel Marew, Sangjun Park, Nisal Perera, Donghyun Kim
code/data similarity 0.73
Abstract

While large-scale human motion capture datasets provide a rich source of demonstrations for humanoid robot learning, retargeting the diverse motions to different humanoid robots remains a nontrivial challenge. Existing kinodynamic trajectory optimization pipelines are computationally expensive and often require manual adjustments per motion. We present FRDV (Fast Retargeting with Dynamics Validation), a scalable framework consisting of rapid constrained kinematic retargeting and an additional dynamics validation pipeline. Its kinematic stage integrates a custom Sequential Quadratic Programming solver, Real-Time Iteration, and parallel chunk-based processing, achieving up to 9,156 frames per second, approximately up to 136 times faster than GMR and ProtoMotions, while robot-specific constraints are incorporated into the optimization to reduce common retargeting artifacts, such as ground penetration and self-collision. For motions requiring additional verification, a contact implicit iLQR controller is utilized to test the retargeted reference under full rigid body dynamics. This dynamics-based validation identifies dynamically infeasible motions and refines contact-related artifacts such as foot floating and foot skating. We evaluate retargeting quality by training motion tracking reinforcement learning policies using several state-of-the-art pipelines and comparing their tracking fidelity and success rates. Furthermore, sim-to-real transfer is demonstrated on a Unitree G1 humanoid. Videos and code are available at: https://daroslab.github.io/frdv/.

0.17

ReCo: Response-Consistent Locomotion with Policy-Aware MPC for Legged Manipulation

cs.RO ·2026-10-01 ·Kuankuan Sima, Yichao Gao, Chenxi Gu, Kefan Zhao, Lin Zhao
benchmark similarity 0.72
Abstract

Continuous legged manipulation requires accurate end-effector tracking while the base keeps walking. Combining reinforcement learning (RL) with model predictive control (MPC) suits this task: the learned policy provides robust locomotion, while MPC coordinates the base and arm to compensate for tracking errors. However, MPC can compensate only for base motion that it can predict, and a learned policy's command response varies with gait phase, contact, and payload. We present ReCo, a framework that couples response-consistent locomotion with policy-aware MPC for legged manipulation. Response shaping trains the policy to respond to commands consistently and repeatably across randomized dynamics. An identified closed-loop response model then lets MPC jointly plan locomotion commands and arm motion. On the simulation benchmark, ReCo reduces position and orientation root-mean-square error (RMSE) by 28.7% and 27.4% relative to the best baseline for each metric. Real-world experiments demonstrate onboard continuous legged manipulation with coordinated base and arm motion.

0.17

Test-Time Compute for Humanoid Behavior Foundation Models

cs.RO ·2026-10-10 ·Weiji Xie, Junsong Wu, Zibo Zhou, Yueru Chen, Xingyi Wang +3 more
code/data similarity 0.70
Abstract · The project page is available at https://bfmttc.github.io/

Humanoid Behavior Foundation Models (BFMs) can execute impressive motions, but downstream applications such as loco-manipulation demand high whole-body positional accuracy. Existing BFMs suffer from a systematic command-execution gap, where executed motions deviate from desired ones. We show that additional test-time compute can improve execution without retraining the BFM. First, we introduce Test-Time Command Optimization (TTCO), which adapts the input command to the specific BFM to produce an executed trajectory closer to the desired motion. TTCO finds such commands by sampling-based optimization through closed-loop simulations of the BFM and robot dynamics. Across three BFMs on the AMASS dataset, TTCO reduces mean global body-position error by 79-84% in simulation. Second, we analyze test-time compute scaling and derive an approximate compute-optimal strategy that can sustain performance gains as the compute budget increases. Third, TTCO can generate BFM-specific action labels from recorded robot trajectories without requiring the original teleoperation body-motion commands. Simulation and real-robot experiments show that these labels are effective for training high-level loco-manipulation policies. This method also supports reusing existing demonstrations across BFMs.

0.52

Generative Neural Retargeting for Human-to-Robot Dexterous Manipulation

cs.RO ·2026-10-08 ·Dechen Gao, Yue Yang, Ben Abbatematteo, Nathan Godwin, Pengcheng Wang +6 more
similarity 0.69
Abstract

Human demonstrations are a scalable data source for learning dexterous manipulation, but the embodiment gap prevents human motion from being executed directly on robots. Inverse kinematics (IK) retargets human motion to robots efficiently but ignores dynamics, often producing infeasible motions. Reinforcement learning (RL) and sampling-based model predictive control (MPC) are commonly employed to yield dynamically feasible motions, but both are sample-inefficient and sensitive to hyperparameters. RL suffers from costly and unstable training and tedious reward engineering; MPC avoids policy optimization, yet retargets each trajectory in isolation, and solving one does not make the next easier. Sampling cost grows rapidly with dataset size and task difficulty. We hypothesize that dynamically feasible trajectories concentrate near a low-dimensional manifold shared across demonstrations, so that retargeting can be reduced to sampling from that manifold, conditioned on human motion, rather than solving a fresh optimization problem for every demonstration. We propose \textbf{Generative Neural Retargeting} (GNR), which uses a flow matching model to sample feasible trajectories. GNR outperforms MPC with only $8.5\%$ of the samples required by MPC, achieving a success rate of $56.20\%$ compared to $27.20\%$ for MPC. GNR can be used for scalable and efficient retargeting of large-scale, long-horizon, and millimeter precision human demonstrations: by applying GNR within a real-to-sim data engine, we produce a dexterous manipulation dataset with dense contact-force labels, spanning $223$k demonstrations and $3.3$k object geometries.

0.24

Leaning Over to Reach Far-Away Objects

cs.RO ·2026-11-14 ·Allen Devaraj, William Xie, Nikolaus Correll
code/data similarity 0.69
Abstract · 8 pages, 9 figures, 1 table. Under review at ICRA 2027. Videos and code at https://h12leaner.github.io/

We study supported reaching to extend a humanoid robot's workspace by bracing against the environment for stabilization using a straightforward yet capable whole-body model predictive control (MPC) approach, exclusively with local sensing and fiducial markers. While typical solutions for whole body humanoid control aim at avoiding or accommodating contact, contact is explicitly required to reach objects placed on surfaces far out of normal reach. We employ sampling-based MPC for whole-body leaning, bracing, reaching, and recovery on a Unitree H1-2 humanoid. The controller runs in real-time at 34 Hz on a laptop, transfers sim-to-real, extends reach by about 50 cm beyond the unbraced standing workspace, and sustains the loaded posture for over four minutes, before pose estimation drifts. The controller reaches the commanded target in 89% of trials and completes the full reach-and-recovery cycle in 81%, across 54 trials spanning six targets and three table heights. We further characterize why such a small real-time sampling budget is sufficient, finding that temporal persistence of sampled actions and exploration scale strongly govern success, while CEM provides the widest operating region over planning rate and model mismatch. These results establish a real-world baseline for online, contact-rich humanoid manipulation. Code, videos, and full hardware details are available at https://h12leaner.github.io/

0.28

Hybrid Feedback Sampling for Sample-Efficient Model Predictive Control

cs.RO eess.SY ·2026-08-19 ·Chaoyi Pan, Zeji Yi, John Zhang, Zachary Manchester, Guannan Qu +1 more
similarity 0.68
Abstract · 15 pages, 6 figures

Thanks to its parallelizability and flexibility, sampling-based Model Predictive Control (MPC) has become widely popular for controlling real-world robotic systems. However, for high-dimensional and open-loop unstable dynamical systems, the required number of samples to improve the control sequence will grow exponentially with the horizon, leading to poor sample efficiency and numerical instability. This paper investigates the instability of shooting methods in sampling-based MPC and shows that the optimal sampling proposal distribution can be realized by sampling with an optimized feedback policy. We refer to this algorithm as Feedback Sampling MPC (FS-MPC). FS-MPC involves a hybrid sampling design which balances local and global search based on the system stability and the available computation budget. Our theoretical analysis shows that our hybrid sampling approach achieves faster convergence than standard MPPI and better optimality than standard feedback sampling. Empirically, in diverse contact-rich control tasks like humanoid loco-manipulation and dexterous manipulation, we show that FS-MPC successfully tackles dynamically unstable tasks where standard sample-based approaches struggle, and strictly outperforms feedback policies alone. Finally, we validate our method on humanoid robot locomotion and manipulation tasks in the real world.

0.49

Motion Retargeting with Spatiotemporal Preferences for Humanoid Loco-Manipulation

cs.RO ·2026-10-21 ·Xiongbo Shi, Shihang Du, Zongyou Yu, Ziyu Lin, Ao Zhou +4 more
similarity 0.67
Abstract

Human motion retargeting bridges the embodiment gap between humans and humanoid robots by converting human demonstrations into reference trajectories for whole-body control and loco-manipulation. For object-interaction tasks, successful execution depends on accurately preserving body--object relations at critical stages. However, uniform per-frame iteration budgets do not account for these localized accuracy requirements, limiting the computational efficiency of retargeting. To address this limitation, we present Spatiotemporal Retargeting (STR), which uses keyframes and key body parts to allocate optimization effort. Specifically, a vision-language model selects relevant motion signals and body parts, and keyframes are identified from changes in the selected signals. Based on these selections, STR assigns additional solver iterations to keyframes and higher interaction weights to the selected parts. To further improve contact fidelity, we introduce Mechanics-Aware Contact Anchoring (MCA) to refine object-surface contact positions using an approximate object-wrench model while retaining the selected surface directions. Building on the resulting references, we develop Spatiotemporal Reinforcement Learning (STRL), which combines adaptive key-stage sampling with a contact-position reward based on target proximity for downstream control. Simulation experiments on a Unitree G1 and real-world experiments on a Unitree R1 demonstrate that STR improves geometric contact coverage and continuity at lower computational cost, while the resulting references improve downstream task completion across diverse object-interaction motions.

0.17