CS Paper Radar

Tensegrity Continuum Robots Enable Task-Adaptive Morphologies for Cooperative Behaviors

Mahmud Hasan Saikot, Sydney Spiegel, Sudheera Akalanka Kariyawasam, Andrew Stefka, Josh Chrisler, Jianguo Zhao

cs.RO ·submitted 2026-08-27 15:05 UTC · v2
top venue

Abstract

Robots that can change their morphologies and behaviors for different tasks and environments hold great promise for adaptable, multifunctional systems. Modular reconfigurable robots (MRRs) can achieve such functionalities by docking and rearranging individual units, but most rely on rigid modules that lack structural compliance, resulting in limited capabilities. Continuum robots offer compliance through flexible backbones, yet they cannot self-reconfigure into task-adaptive multi-robot configurations. Here, we introduce an MRR that unifies the advantages of both architectures by combining a tensegrity-based compliant body with claw-based connection mechanisms. Each robot can manipulate and locomote independently, and multiple robots can self-reconfigure into different morphologies (e.g., chains, loops, branches) for cooperative manipulation and locomotion. We demonstrate the robots' capability across diverse tasks and environments, including coordinated object manipulation and transport, multimodal locomotion, and loco-manipulation in real-world scenarios. These results lay a foundation for adaptable and multifunctional robotic collectives, with broad potential applications in manufacturing, space exploration, and search-and-rescue operations.

Comment
22 pages, 6 figures, Accepted to Nature Machine Intelligence

Closest papers

Nearest neighbours by meaning across the whole index.

Detachable Wire Drive : Reconfigurable Robot Architecture with Shared Actuators

cs.RO ·2026-08-16 ·Takahiro Hattori, Kento Kawaharazuka, Kei Okada
published similarity 0.70
Abstract · Accepted at IROS2026, website - https://hatofly.github.io/detachable-wire-drive/

Reconfigurable robots offer significant potential for adapting to diverse tasks; however, conventional centralized architectures often require dedicated actuators for each module, leading to substantial increases in overall system weight, volume, and cost. To address these challenges, this paper presents the "Detachable Wire Drive," a reconfigurable robotic system that enables the sharing of heavy and expensive actuators across various morphologies. The core of this system is the "Wire Detach Unit," a mechanism designed to physically split and reconnect wire drive paths, allowing motors to be consolidated into a common base unit. We demonstrate the versatility of this approach by developing a 2-DOF rigid arm, a continuum arm, and two distinct grippers, all of which are interchangeably attached to, and driven by, a single shared actuator set. Experimental results validate the mechanical reliability of the detachment process and the control framework's ability to seamlessly manage transitions between configurations, highlighting a path toward more efficient and multi-functional robotic systems.

0.39

Recompositional Robotics: Cross-Domain, Open-set, and Lifelong Modularity Beyond Morphology

cs.RO ·2026-09-29 ·Steven Swanbeck, Jonathan Salfity, Corrie Van Sice, Robert Blake Anderson, Mitch Pryor
published similarity 0.68
Abstract · 2026 IEEE/RSJ IROS Workshop on Reconfigurable Modular Robots

Research in modular robotics has produced capable approaches allowing a robot's morphology to change online, with recent efforts also developing approaches to decide which morphology to assume and automatically propagate that decision into the robot's motion planning and control. These approaches are powerful and increase adaptability in the field. However, an alternative objective is not to build robots whose structures can change, but robots whose fundamental capabilities can change, where capability is a joint function across several domains, including kino-dynamics, perception, compute, and high-level coordinating behaviors. A robot designed to be reconfigured across these domains has a greater capacity to alter its capability than one that can be reconfigured in a single domain. We refer to this cross-domain reconfigurability as integration span, and recognize a complementary measure of the resistance to reconfiguration, which we refer to as integration inertia. Current modular robots have reduced integration inertia in the structural domain while it remains high in the other domains that contribute to integration span. We assert that the systems that can provide the most utility through reconfiguration in practice are those maximizing span and minimizing inertia and call this general problem recompositional robotics: adaptation over a heterogeneous set of modules including hardware, software, compute, and behavior that abstracts each component by the interfaces it requires and provides such that they can be reasoned over holistically. We define the problem, ground it in two deployed systems and active research efforts, and pose open questions about the future of recompositional robotics.

0.28

Robotic Budding: From Homogeneous Cells to Diverse Morphologies in Physical Self-Reproduction

cs.RO ·2026-10-22 ·Siyuan Zhang, Junyan Liu, Wanglin He, Hod Lipson
similarity 0.67
Abstract

Physical self-reproduction in modular robots remains difficult because a robot must not only move, but also collect, align, dock, and separate modules reliably in hardware. Taking inspiration from how genetically identical cells form the varied tissues of an organism, we introduce a single standardized robotic module that combines a magnetic docking interface with two actuated joints and folds from a flat, two-dimensional configuration into three-dimensional structures. Modules of this single design can be assembled into two morphologies: a three-module "trilobite" and a five-module "seal". Using a small set of discrete motion commands, a human operator steers an assembled parent robot to dock magnetically with a sequence of spare modules, which are assembled into a second, structurally identical individual that then separates from the parent. Because the parent retains all of its original modules, this is a budding-style form of physical reproduction. Here, we report preliminary hardware demonstrations of this full process on both morphologies. We discuss the current scope of the system, including its present reliance on direct human teleoperation rather than autonomous control, and outline directions toward autonomous execution of this process and repeated validation across a larger number of independent trials.

0.17

Curvature by Design: A Support Structure for Continuum Robots

cs.RO ·2026-11-04 ·Justus Sagemüller, Harald Minde Hansen, Kristin Y. Pettersen
similarity 0.67
Abstract

Constant- and piecewise-constant-curvature models are widely used to simplify the kinematics of continuum robots, although the assumed curvature profiles are not necessarily inherent mechanical properties of the robot and may therefore be violated during operation. Rather than assuming a prescribed curvature profile in the kinematic model and estimating deviations from it, this paper presents a multi-segment scissor-based support structure that mechanically constrains a continuum robot to exhibit prescribed constant or spatially varying curvature profiles. The design uses Taylor approximations to enable an overconstrained multi-joint linkage to predictably distribute global bending among the small-angle movements of multiple flexures. The geometric coupling is realized using compliant flexure joints, enabling the support structure to be manufactured as a single piece. The structure is integrated with a tendon-actuated continuum robot with a flexible backbone. Experiments show that the structure makes the robot resistant to deformations other than the prescribed curvature, significantly enhancing shape precision compared to classical flexible-backbone designs. This constrains the robot from making S-shapes when external loads are applied in the opposite direction of the bending. By mechanically constraining the admissible deformation, the proposed structure reduces the number of independent shape variables that must be estimated.

0.11

Bridging Language and Physics: Automated Design of Continuum Robots with Large Language Models

cs.RO ·2026-09-08 ·Jingyi Chen, Mohan Zhang, Laura Yao, Yingtai Ni, Jianmin Ji +3 more
publishedbenchmarkcode/data similarity 0.64
Abstract · The first three authors contributed equally to this work

Large language models (LLMs) have recently emerged as a promising tool for automating robot design from high-level specifications, yet they remain ineffective for robots operating under complex physical interactions. This limitation stems from the gap between language-based reasoning and the physical consequences of embodiment, often resulting in designs with low physical validity. In this work, we propose a multi-layered framework, AID-SR, that establishes a closed loop by translating simulator-observed physical states into structured feedback for the LLM designer. Combined with semantic critique, human feedback, and iterative refinement, the framework promotes the generation of physically feasible and functionally meaningful robot designs. We evaluate our approach on tendon-driven continuum robots across a benchmark of 14 tasks spanning reaching, grasping, locomotion, and manipulation. The proposed framework achieves 96.2% rate for passing the simulation feasibility check and by applying a common reinforcement learning training, 26.7% robots can successfully fulfill the corresponding task. We then fabricate three designed robots of AID-SR that successfully complete the task in real-world. These extensive experiments across simulation and real-world environments demonstrate and break the wall of utilizing the LLMs for automated design of continuum robots. The source code and experimental resources are publicly available at https://github.com/UNITES-Lab/AID-SR.

0.70

Estimation and Control of Tensegrity Manipulator Kinematics based on Strut Inclination Angles

cs.RO ·2026-09-21 ·Tufail Ahmad Bhat, Shuhei Ikemoto
top venue similarity 0.64
Abstract

Unlike conventional rigid-link robots defined by discrete joints, continuum robots pose a fundamental challenge for expressing their complex continuous bending configurations for closed-loop control. Several modelling approaches have been proposed for conventional continuum robots, but tensegrity-based continuum robots remain largely open. Moreover, many of these approaches assume a continuous elastic backbone and are therefore not directly applicable to tensegrity manipulators, whose bodies are networks of rigid struts and tensioned cables. This work presents a reduced-order model for shape and posture control of a tensegrity-based continuum manipulator. The manipulator is modelled as a serially connected parallel-link mechanism. The proposed method is formulated as an optimization problem that uses geometric constraints of the tensegrity structure together with information from the Inertial Measurement Unit (IMU) sensors embedded in the strut elements. To the best of our knowledge, this work presents the first experimental demonstration of a real-time IMU-based shape estimation method on a full-scale tensegrity manipulator and demonstrates posture control using a simple Proportional-Integral (PI) controller. The results show that the proposed method can estimate the shape of both single-module tensegrity structures and multi-module tensegrity manipulators from arbitrary static configurations and achieve desired postures.

0.48

A Morphing Aerial Robot With Thruster-Integrated Flexible Continuum Links for Shape Adaptive Aerial Manipulation

cs.RO ·2026-09-16 ·Eri Sawada, Kazuki Sugihara, Ayano Miyamichi, Kunio Kojima, Kei Okada
published similarity 0.63
Abstract · Accepted to 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)

In recent years, aerial manipulation has attracted increasing attention as a key to expand the application of aerial robots. In this work, we focus on two major research directions for achieving versatile aerial manipulation: (i) acquiring high environmental adaptability using soft manipulators, and (ii) expanding the feasible wrench space by distributing thrusters along the manipulator. However, no aerial robot has simultaneously satisfied these two requirements. Therefore, in this paper, we propose a morphing rotor-distributed aerial robot with flexible continuum links that achieves both high shape adaptability and an expanded wrench space. The flexible continuum links function as soft manipulators, passively conforming to the shape of the environment, while the thrusters distributed along the continuum links expand the feasible thrust wrench space and enable the end-effector to exert large interaction forces. To realize the proposed robot, it is essential to suppress vibrations of the lightweight continuum links. Thus, we develop a composite leaf-spring structure that provides both high torsional and vertical stiffness, and vibration-suppressing control methods. Using these implementations, we demonstrate stable flight and a variety of aerial manipulation tasks. To the best of our knowledge, this is the first work to realize aerial manipulations using flexible links with an integrated thruster.

0.29

One Print, Many Moves: Monolithic Origami-inspired Folding Actuator for Composable Soft Multi-DoF Systems

cs.RO ·2026-09-01 ·Jaehyung Jang, Zhenish Zhakypov, Jasmin Elena Palmer, Melissa Klein, Jee-Hwan Ryu +1 more
similarity 0.63
Abstract · 26 pages, 7 figures

Conventional soft robot actuators excel in compliance, but their uncontrolled deformations compromise accuracy and hinder scaling to multi-degree-of-freedom (DoF) systems. We introduce a MONOlithic ORIGAMI-inspired soft folding actuator design (MONORIGAMI) that establishes a design strategy based on spatially programmed stiffness anisotropy to preserve material compliance along desired folding directions while selectively restricting deformation in unwanted directions. The actuator leverages stiffness tiers based on material thickness, patterned in an origami-inspired geometry with facets and creases, converting unconstrained soft deformation into accurate, repeatable, and composable folding motions without additional reinforcements. The design is fully 3D-printable through a single-material, single-print process that requires no assembly. Each actuator serves as a scalable motion primitive, and linking and orienting multiple actuators mechanically programs multi-DoF trajectories. Using the same fundamental module, we demonstrate three 3D-printed soft multi-DoF robotic systems spanning distinct application domains: (1) a compact 4-DoF wearable haptic device for high-fidelity cutaneous feedback in virtual reality (VR), (2) a 3-DoF joystick for kinesthetic feedback in teleoperation, and (3) a modular robotic gripper capable of underwater operation with geometry-encoded grasp trajectories. These systems demonstrate the module's capabilities for compact multi-axis integration, controlled physical interaction, and geometry-programmed operation across different environments. Together, these results show that MONORIGAMI provides a general, composable, accessible, reliable, and scalable platform for high-precision soft multi-DoF robotics, addressing long-standing limitations in both soft actuator design and fabrication.

0.14