CS Paper Radar

GOLEM: Modular Humanoid Autonomy Towards Electric Vehicle Battery Disassembly

Max Conway, William Xie, Allen Devaraj, Yutong Zhang, Niraj Pudasaini, Mateo Feit, Adam Abid, Zachary Allen, Chen Liu, Xuan Tan, Jensen Lavering, Jason Chen, Lyle Antieau, Anthony Von Pischke, Alessandro Roncone, Zachary Sunberg, Nikolaus Correll

cs.RO ·submitted 2026-08-21 18:38 UTC · v1
code/data

Abstract

Disassembling end-of-life electric vehicle (EV) battery packs is dull and dangerous work, performed almost entirely by humans. We present GOLEM (Generalized Open Library of Embodied Modules), an end-to-end, open-source system architecture for EV battery disassembly with the Unitree H1-2 humanoid robot in which walking, manipulation, dynamic stability, navigation, and spatial memory are independent modules with abstract interfaces, so that methods are easily developed, interchanged, and compared. GOLEM is deployed as a Docker-based ROS 2 abstraction in which MuJoCo and IsaacLab digital twins expose interfaces matching the physical robot. GOLEM's composability and per-module customization enable development and demonstration of humanoid EV battery disassembly, from simulation to reality. GOLEM provides fair comparison between humanoid modules, enabling evaluation as a capability ladder, in which one module is characterized at a time and added as a rung: LiDAR-inertial navigation places the robot within 13.0cm of a 6m goal; a learned standing controller recovers from external disturbances that sampling-based lower-body MPC does not; and grasping loosened fasteners from a real Hyundai Ioniq 5 pack degrades from 97% tethered to 87% free-standing to 37% under navigation-induced pose variance. Source code is available at the project page https://golem-humanoid.github.io

Closest papers

Nearest neighbours by meaning across the whole index.

HODAgent: Towards On-Demand, Responsive Humanoids for Physical World Human Interaction

cs.RO ·2026-08-18 ·Wang Warren Chen, Jiahao Zhang, Zhenjiang Li, Mingxu Wang, Lei Yi +4 more
similarity 0.66
Abstract · we have received a formal directive from our company requiring all company assets to undergo a mandatory internal review process before any …

We propose HODAgent, a System-2 embodied agent for humanoid robots in service settings, addressing situated intent, responsive execution, task revision, and outcome verification. Its semi-duplex architecture integrates an Env-Interactor, Planner, Executor, and hierarchical Memory to maintain coherent interaction, planning, and task state during service episodes. This allows handling new requests during motion, retaining progress, revising actions, and grounding closure in execution outcomes. A shared interface connects simulation and physical robots (Unitree G1), isolating platform-specific control. In an interactive simulation with 164 cases, HODAgent achieves 84.8% and 91.5% Joint Success under two VLM backbones, outperforming baselines by 9.8 and 18.9 points. On physical robots, pass rates are 92% (atomic), 72% (composite), and 63.3% (complete tasks). On multiple embodied benchmarks, it improves over baselines by 0.7-9.0 points. Results show a unified System-2 agent enables adaptive humanoid service across simulation and reality.

0.19

From Tabletop to Walking Bot: Deploying a VLA Model on a Legged Manipulator Robot

cs.RO ·2026-10-23 ·Giovanni Minelli, Antonio Langella, Giovanni B. Dessy, Lorenzo Amatucci, Giulio Turrisi +2 more
similarity 0.62
Abstract

Vision-language-action (VLA) models are typically pretrained on broad, diverse datasets and subsequently fine-tuned on a comparatively small dataset tailored to a specific target robot. Such adaptation recipe is now widely established, achieving its most mature results on fixed-base arms due to their static base dynamics and consistent reference frame. Mounting the same arm on a quadruped extends the workspace to the entire floor, but fundamentally changes the embodiment: rather than controlling the arm in isolation, the policy must jointly coordinate base navigation, body posture, and end-effector motion. In this work, we study the practical demands of this embodiment change across data collection, model adaptation, and inference design to achieve closed-loop loco-manipulation on a Unitree Go2 with an AgileX Piper arm. We report the choices that made this real-robot deployment feasible, namely model variant, action horizon, and demonstration conventions, together with a study tailored to a pick-and-place task, separating data coverage from model capacity. We show that expanding demonstration coverage reduces held-out end-effector error by 30%, and incorporating secondary skills (such as pushing rather than grasping) introduces new behavioral modes without degrading baseline performance. Finally, closed-loop real-world experiments show how dataset composition shapes success and failure, validating the pipeline for more complex loco-manipulation.

0.19

DUET: Decoupled Upper- and Lower-Body Execution for Task-Agnostic Humanoid Loco-Manipulation

cs.RO cs.LG ·2026-09-19 ·Kapalik Khanal, Biswash Khatiwada, Stephen Afrifa, Fan Wu, Ramesh Bahadur Bist
similarity 0.62
Abstract

Changing a humanoid robot's manipulation policy should not require retraining the controller that maintains the robot's balance. This study introduces DUET, a decoupled execution framework that enables locomotion and manipulation controllers to operate simultaneously by combining their commands only at the robot interface. A reinforcement-learning locomotion policy controls the 12 leg joints and a waist yaw joint, tracking planar velocity, turning rate, and pelvis height from deep crouching to upright standing on a 23-degree-of-freedom Unitree G1. The 10 arm joints are excluded from the action space, while their positions and velocities are included only as observations, so that any compatible manipulation policy that generates arm-joint targets can control the upper body, and the locomotion policy keeps the lower body stable without requiring shared training or direct coordination. This study demonstrates the modular approach on hardware by pairing the same locomotion checkpoint with two different vision-language-action models, GR00T N1.7 and pi0.5. In simulation evaluation, the locomotion controller kept the robot's lower body stable with no falls while tracking the commanded planar velocity, yaw rate, and pelvis height with errors of 0.186 m/s, 0.142 rad/s, and 0.016 m, respectively. Ablation studies identify the upper-body pose curriculum as the dominant component, and removing this training step reduces episode survival from 20.0 to 7.4 seconds and increases the fall rate to 6.06 per environment minute. Robustness tests show no falls under pushes of up to 1.0 m/s within the trained payload range, and no falls at twice the payload limit for pushes below 0.7 m/s. These results show that a manipulation policy can be exchanged without retraining, restarting, or otherwise touching the layer that keeps the robot upright.

0.22

Morphology-Aware Human Motion Retargeting for Wheeled-Humanoid Loco-Manipulation

cs.RO ·2026-09-10 ·Chenbo Xia, Chao Ye
similarity 0.61
Abstract

Human-to-humanoid retargeting has largely been studied on legged platforms, while comparatively few wheeled-humanoid systems support coupled locomotion and manipulation from general human motion. Building on GMR's configurable general-motion retargeting and BeyondMimic's physically simulated R1 Pro learning framework, we present a reproducible pipeline that converts multi-dataset SMPLX motion into executable loco-manipulation behavior for the Galaxea R1 Pro wheeled humanoid. The robot has a planar three-wheel base, a serial torso, and two arms but no leg joints, so human lower-body motion must be redistributed across base motion and torso posture without sacrificing manipulation-relevant arm geometry. Our pipeline combines canonical body-shape preprocessing, planar-base normalization, morphology-aware differential inverse kinematics, shoulder-rooted hierarchical arm retargeting, and continuous torso substitution for bending and squatting. A reference-twist-driven planning layer then decodes planar base motion into continuous three-wheel steering and rolling commands subject to hysteresis, kinematic continuity, acceleration, and actuator-rate limits. Finally, a 21-dimensional BaseDecode policy is trained in Isaac Lab with directional joint-limit scaling, focused upper-body tracking, and a staged wheel-contact reward. The resulting system provides a complete bridge from human motion data to physically trackable wheeled-humanoid loco-manipulation rather than a visualization-only retargeter; quantitative policy comparisons remain scheduled for a later revision.

0.43

SHOES: Sim-to-real Hardware-adaptation via On-policy Expansion of Skills for Legged Robots

cs.RO ·2026-10-12 ·Kota Tsuruhara, Tsung-Yuan Chen, Kento Kawaharazuka
published similarity 0.60
Abstract · Accepted at the 10th Conference on Robot Learning (CoRL 2026)

Humans expand their locomotion capability by wearing appropriate footwear, such as hiking boots for mountains or skates for ice. Footwear changes the ground-contact interface and enables traversal of otherwise difficult terrain. In contrast, locomotion controllers are typically trained for a fixed morphology, and their performance can degrade when shoes alter foot geometry, mass, and friction. We propose SHOES, a sample-efficient framework for adapting locomotion policies to footwear-induced morphology changes. SHOES freezes a simulation-trained nominal policy and fine-tunes only lightweight, identity-initialized modulation modules on the robot, preserving the initial behavior while enabling efficient hardware adaptation. We also introduce SafeBox, a workspace-aware waypoint sampler that constrains online adaptation within a user-defined workspace. The simulation results with a shoe-equipped Unitree Go2 show that SHOES substantially recovers locomotion performance after footwear-induced morphology changes using limited additional adaptation. Under the same adaptation budget, SHOES outperforms FiLM-only, Linear Adapter-only, and residual-RL baselines. Real-world experiments on a Unitree Go2 fitted with human shoes further evaluate the effectiveness of SHOES for hardware deployment.

0.21

From Legs to Wheels: Embodiment-Aware Human Motion Retargeting for Mobile-Base Humanoids

cs.RO ·2026-10-06 ·Jiyeon Koo, Eunseom Pyo, Jeonghee Seo, Taehwa Kim, Andrew Jaeyong Choi
similarity 0.60
Abstract · 8 pages, 4 figures

Human video offers a scalable source of robot demonstrations, yet most human-to-humanoid retargeting methods assume a legged robot with human-like kinematics. This assumption does not hold for mobile-base humanoids equipped with a wheeled base, vertical lift, and two arms. Human walking must be expressed through base motion, while torso bending may require coordinated lift and arm motion. We address this mismatch with a task-conditioned framework that assigns reconstructed human motion to base, lift, and arm responsibilities before robot-specific realization. The allocator preserves the human-derived path, stabilizes heading, separates turn and translation when needed, retimes commands to satisfy base limits, and repairs lift and arm trajectories. A deployment adapter then converts the reference to 50 Hz commands using stationary-base detection, deadband and slew-rate filtering, time-consistent playback scaling, and separate linear and angular gains. We evaluate the resulting references with human-derived task-space comparisons, policy-free simulation replay, and a qualitative execution on a physical robot.

0.29

A System for Fast, Resilient, and Adaptable Loco-Manipulation Behaviors on Humanoid Robots

cs.RO ·2026-09-01 ·Duncan Calvert, Luigi Penco, Dexton Anderson, Tomasz Bialek, Arghya Chatterjee +2 more
position similarity 0.60
Abstract · 20 pages, 25 figures, 1 table. Supplementary video: https://www.youtube.com/playlist?list=PLJK5CTyotYqsfgfnXb-09YNFeBose6uEY

There is tremendous value in humanoid robots taking on physically demanding, hazardous, and repetitive work in spaces built for humans. However, a useful robot for these spaces must coordinate locomotion, whole-body motion, perception, contact, and operator supervision. We present a robot-local, runtime-editable behavior authoring and runtime system that addresses these challenges. We argue that behavior architecture can be a primary enabler of capability, speed, and reliability, and that runtime editability enables fast behavior creation, adaptation, extension, and combination. Our behavior architecture combines object-centric Affordance Templates, a tree structure that provides organization and logic, and runtime-editable perception through a behavior scene and primitive scene actions. Our operator interface remains continuously synchronized to the robot for runtime authoring, monitoring, and repair. Action primitives execute through a whole-body controller that supports concurrent body motions and walking. Demonstrations of our system cover six task variants on Unitree H1-2 and Alex. We execute a push door traversal in 34 seconds and sort six balls by color in 45 seconds under human disturbance. Timed authoring sessions show scratch creation of new loco-manipulation behaviors and adaptation of existing ones in hours. Comparison against the literature finds our approach to be competitive with recent learned systems.

0.53

Runtime Safety and Emergency Stops on a Full-Size Humanoid: Deployment Lessons and a Case for Graduated Force Authority

cs.RO ·2026-11-11 ·Max Conway, Yutong Zhang, Allen Devaraj, William Xie, Alessandro Roncone +1 more
code/data similarity 0.59
Abstract

Full-size humanoid robots are being considered for hazardous industrial work such as disassembling electric-vehicle batteries. We describe the safety mechanisms of an open-source autonomy stack for the Unitree H1-2 humanoid and what deploying them taught us. All joint commands pass through a safety layer that runs separately from the control software. It enforces joint position, velocity, and torque limits, and it stops the robot when a state estimate becomes stale or when the hard-wired emergency stop (e-stop) is pressed or disconnected. We pushed the standing robot until it lost balance. With a model-predictive lower-body controller it never recovered, and the operator had to press the e-stop in every trial. Pressing it removes balance control, and the robot falls. The safety layer's own limits trigger the same stop, and limits chosen for manipulation were exceeded during normal walking. Near an operator or a battery pack, the fall can be more dangerous than the cause of the stop. Joint limits bound how much force a robot can apply, but not when applying it is appropriate. Drawing on research on responsibility and on child and adolescent development, we therefore make a case for granting robots force authority in stages, with a person or organization explicitly responsible for its use.

0.35