CS Paper Radar

MOSS: Multimodal Origami Swamp Robot System

Tian Lan, Atar Babgei, Luca Romanello, Mirko Kovac, Sophie F. Armanini

cs.RO ·submitted 2026-10-16 17:35 UTC · v2

Abstract

Robotic systems for environmental monitoring and ecological surveying in wetlands and swamps must operate across diverse terrestrial and aquatic conditions. Conventional fixed-geometry wheels cannot adapt their contact geometry to these varying conditions. This work presents MOSS (Multimodal Origami Swamp Robot System), a compact amphibious robotic platform with 3D-printed origami wheels. The compact crank mechanism switches the wheel between contracted and expanded configurations, changing its width, body diameter, and fin orientation simultaneously. The contracted configuration is better suited to efficient rolling on firmer ground, whereas the expanded configuration provides greater contact and terrain engagement on softer surfaces. MOSS was evaluated on soil, sand, mud with varying water content, and water, in addition to in-motion morphing and terrestrial-aquatic transition tests. The more energy-efficient wheel configuration depended on terrain. The contracted configuration achieved a lower cost of transport on firmer soil and mud, whereas the expanded configuration performed better on wetter mud, sand, and water, reducing the cost of transport by up to 29%. Expanded wheels also reduced slip in wet mud and reduced both slip and hub sinkage in sand. MOSS successfully completed configuration changes in $1.95 \pm 0.11$ s and demonstrated continuous locomotion across soil-mud-water transitions. Outdoor trials further demonstrated operation across natural deformable terrain and water. These results show that adaptive wheel geometry provides terrain-dependent locomotion benefits and enables a single compact platform to traverse substantially different terrestrial and aquatic conditions.

Comment
8 pages, 8 figures, submitted to ICRA 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Omnidirectional Amphibious Locomotion via Internal Mass Actuation

cs.RO ·2026-09-23 ·Niko Weaver, Boxi Xia, Li-Yu Lo, Yuhao Huang, Boyuan Chen
code/data similarity 0.60
Abstract

Field robots must traverse varied terrain and obstacles while remaining robust to water, debris, vegetation, and physical contact. We present MARBLE, a fully enclosed omnidirectional amphibious rolling robot driven entirely by internal mass redistribution. Three mutually orthogonal linear sliders shift internal masses to generate body rotation, while an orientation-aware controller maps planar velocity commands into slider positions. A rigid spherical shell encloses all active mechanisms and simultaneously serves as the terrestrial contact surface, buoyant enclosure, and mounting structure for passive fins that enable water-surface propulsion. Rotation of the same shell architecture hence produces rolling on land and surface propulsion in water without mechanical reconfiguration or separate locomotion actuators. The spherical morphology further allows the robot to accommodate changes in body orientation and contact location during direct interactions with terrain and obstacles. We evaluate MARBLE through omnidirectional locomotion characterization, traversal across heterogeneous terrestrial environments, aquatic surface locomotion, land-water transitions, and deliberate obstacle interactions. These experiments demonstrate how a single enclosed mechanical architecture can combine omnidirectional mobility, cross-medium locomotion, and tolerance to environmental contact. MARBLE provides a compact design for field mobility across heterogeneous terrain, obstacles, and land-water transitions. We will open-source all software and hardware design. Our website is https://generalroboticslab.com/MARBLE

0.44

Mechanical Precision Weeding with a Quadruped Robot

cs.RO ·2026-09-17 ·Ruben Beumer, Tom Janssen, René van de Molengraft, Duarte Antunes
similarity 0.57
Abstract

Herbicide-based weed control is increasingly unsustainable due to rising weed resistance and the adverse environmental impacts of chemical use. While mechanical weed control avoids these drawbacks, it is typically implemented using large machines that cause soil compaction. We propose a novel alternative based on small mobile robots for mechanical weeding. Compared with existing automated mechanical weeding approaches, the proposed method offers reduced soil compaction, simpler automation, and improved scalability. Our solution involves a Boston Dynamics Spot quadruped robot equipped with a custom weed removal tool featuring a milling bit at its end. The tool is rigidly attached to the robot and uses the degrees of freedom of the robot base by actuating the legs, while keeping the feet stationary. We develop a software architecture that enables autonomous weed removal and integrate this system with all other required components. We analyze the accuracy and efficiency of the current proof of concept both in an indoor and outdoor environment and provide recommendations for future work to make the system more accurate and efficient.

0.22

Enhancing Robotic Perception and Adaptability through Sensor Fusion and Origami-Inspired Designs

cs.RO ·2026-10-07 ·Namai Chandra, Jaison Jose, Kavi Arya, Shivaram Kalyanakrishnan
similarity 0.55
Abstract · 11 pages, 11 figures, 3 tables

Compact mobile robots must recover scene geometry under changing lighting and surface texture while working within tight payload and cost limits. We present a compact mobile robot that uses origami-inspired wheels for locomotion and active control of its sensing geometry. As the wheels move between terrain-adaptive configurations, the changing chassis pitch sweeps a 2D LiDAR through intermediate elevations; held wheel positions provide a chosen viewing angle. An IMU accounts for chassis attitude, and a fusion node projects LiDAR returns into the RGB-D depth stream supplied to RTAB-Map. The arrangement uses the wheel actuation already present on a sub-300 USD, sub-2 kg prototype to extend the scanner's viewing geometry. We assess depth fusion in a textureless indoor corridor and an outdoor sunlit area, with three runs per sensor configuration in each setting. Mean full-frame invalid-depth fractions fell from 21% to 11% indoors and from 48% to 18% outdoors. The prototype combines improved depth coverage with a continuously adjustable LiDAR viewpoint using the same actuation that reconfigures its wheels.

0.25

Importance and methods to control, vary, and characterize mud strength for studying locomotion

cs.RO physics.bio-phcond-mat.softeess.SY+1 ·2026-09-01 ·Divya Ramesh, Gargi Sadalgekar, Qiyuan Fu, Zachary Souders, Jack Rao +1 more
publishedunusual similarity 0.55
Abstract · Journal of Experimental Biology, in review

Animals and robots encounter mud at the water-land interface. Like sand, mud can stay solid or flow like a fluid. Unlike sand, the yield strength of mud at which solid-fluid transitions occur depends on not only the amount of solid relative to fluid (water in mud, air in dry sand), but also how much coarse grains and fine clay are within the solid. Despite understanding of locomotion on/within dry sand dominated by coarse grains with repulsive normal forces and friction, little is known for mud dominated by fine clay with strong cohesion. Here, we developed methods to prepare uniform mud of controlled, variable yield strength and characterize and track its drift from water evaporation. Compared to other flowable substrates, mud strength measured by upward force during penetration is weaker and can vary more, and mud sticks more during extraction to pull downward, making it more challenging for locomotion.

0.46

Multi-Terrain Mastery: A Comprehensive Controller for Bipedal Locomotion

cs.RO ·2026-09-27 ·Oluwami Dosunmu-Ogunbi, Aayushi Shrivastava
similarity 0.53
Abstract

Advancing bipedal robots to navigate diverse terrains remains a significant challenge in robotics. Traditional locomotion controllers excel on specific surfaces but struggle across varied environments, limiting their practical applications. Given the unpredictable nature of real-world environments, a single controller capable of handling multiple terrains is ideal, eliminating the need for multiple specialized controllers. We propose a multi-terrain controller to enhance the versatility and robustness of bipedal locomotion. Building on previous work with a stance ankle motor for stability on inclined and rough surfaces, this paper extends capabilities to steep wet uneven grassy slopes, and compliant terrains such as sand, gravel, rocks, and constrained terrains like staircases. To address the unique demands of these terrains, we introduce a new impact map that is essential for maintaining performance and robustness against unseen terrains. We also discuss in detail the control structure for real-time deployment on the robot. We validate our controller on the 20 degree-of-freedom Cassie bipedal robot.

0.23

Agibot: An Open-Source Modular Swerve-Drive Robot Platform for Agricultural Robotics Research and Education

cs.RO cs.LGeess.SY ·2026-11-06 ·Moeen Ul Islam, Bishal Adhikari, Kori Edwards, Lorien Harvey, J. Alex Thomasson +1 more
code/data similarity 0.52
Abstract · 14 pages. Submitted to IEEE Transactions on AgriFood Electronics (TAFE)

Agricultural production faces persistent labor shortages and increasing demand for automation, yet progress in agricultural robotics remains constrained by the limited availability of affordable, flexible, and accessible research platforms. This paper presents Agibot, an open-source, modular, low-cost agricultural robotics platform designed for autonomy research and experimentation, with potential applications in hands-on robotics education. The platform integrates four-wheel independent swerve drive, swappable computing, distributed embedded control, multimodal sensing, and configurable manipulation within a unified sense-plan-act-verify framework supporting perception, control, navigation, manipulation, and autonomous task verification. The platform was evaluated through representative row-crop navigation and manipulation tasks under varying lighting and soil conditions. Experiments demonstrated reliable lane following, autonomous row-to-row navigation, target identification, seed dispensing, plant manipulation, and closed-loop verification of task success. Its modular architecture supports independent testing, modification, and validation of autonomy components for rapid prototyping and experimentation. These proof-of-concept tasks, controller-tuning studies, and integrated trials demonstrate the platform's research capabilities, while its accessible and reconfigurable design supports its use for hands-on robotics education. By combining affordability, modularity, open-source accessibility, configurable manipulation, and end-to-end sense-plan-act-verify autonomy, Agibot provides a practical platform for agricultural robotics research, technology development, and workforce training.

0.34

OmniQuad: a Wheeled-Legged Hybrid Robot with Omnidirectional Wheels

cs.RO ·2026-10-28 ·Francesco Iotti, Alok Ranjan, Franco Angelini, Manolo Garabini
publishedhighly cited similarity 0.51
Abstract

Combining wheeled and legged locomotion within a single robotic platform offers the potential to harness the advantages of both systems. The development of such hybrid systems remains an active area of research. While legged robots exhibit remarkable adaptability for traversing uneven and rugged terrains, their relatively low speed limits their practicality in indoor environments. Conversely, wheeled robots demonstrate higher efficiency on flat surfaces but often encounter difficulties when navigating obstacles such as steps. This paper introduces OmniQuad, a novel hybrid robot that integrates mecanum wheels with legged locomotion to exploit the benefits of both modalities. Mecanum wheels provide omnidirectional mobility, enhancing the robot's manoeuvrability by enabling agile movement in confined spaces and the ability to maintain a consistent orientation during task execution. In this work, we first present the design of a custom wheeled-foot featuring mecanum wheels. Subsequently, we describe the complete robot assembly, comprising these wheeled feet and EM-Act actuators. Finally, we detail the control scheme developed to govern the OmniQuad and evaluate its performance through experimental trials conducted in both indoor and outdoor environments.

0.64

Mudskippers use tail thrusting to help crutching to move on mud of various wetness

cs.RO physics.bio-phcond-mat.softeess.SY+1 ·2026-09-01 ·Divya Ramesh, Gargi Sadalgekar, Jiangqi Tan, Chen Li
similarity 0.51
Abstract · Journal of Experimental Biology, in review

At the water-land interface, amphibious fishes encounter wet flowable substrates made of granular solid-water mixtures, which can stay solid or flow like a fluid. As these substrates become wetter or drier, their yield strength (at which solid-fluid transition occurs) and cohesion (how sticky they are) both change, challenging locomotion. Despite substantial understanding of tetrapod locomotion on flowable substrates (mostly dry sand), we know little about how amphibious fishes cope with wet flowable substrates of various wetness. Here, we studied mudskippers on clay mud of controlled, variable wetness over the range where solid-fluid transition occurs. As mud became wetter, its strength decreased by 100-fold, leading the animal to sink deeper, with larger areas of body and fins contacting mud. By contrast, mud stuck most easily at intermediate wetness. The increased sinkage and contact and stickiness change caused more mud to stick to and pull against the animal on wetter mud. We also tested dry mud, which stuck to animal fins as its mucus dried. Despite these challenges, the mudskipper predominately used a conserved crutching gait on all except the wettest mud tested, with a modest performance reduction. When normal crutching became less effective, the animal assisted it with tail thrusting, by bending and straightening it to push downward and backward to generate additional thrust and lift, or even thrusting the tail to jump. These observations suggest that mudskipper's crutching motor program is well adapted to its native muddy substrates but inflexible, with most novelty in tail use.

0.35