CS Paper Radar

Mechanical Precision Weeding with a Quadruped Robot

Ruben Beumer, Tom Janssen, René van de Molengraft, Duarte Antunes

cs.RO ·submitted 2026-09-17 10:53 UTC · v1

Abstract

Herbicide-based weed control is increasingly unsustainable due to rising weed resistance and the adverse environmental impacts of chemical use. While mechanical weed control avoids these drawbacks, it is typically implemented using large machines that cause soil compaction. We propose a novel alternative based on small mobile robots for mechanical weeding. Compared with existing automated mechanical weeding approaches, the proposed method offers reduced soil compaction, simpler automation, and improved scalability. Our solution involves a Boston Dynamics Spot quadruped robot equipped with a custom weed removal tool featuring a milling bit at its end. The tool is rigidly attached to the robot and uses the degrees of freedom of the robot base by actuating the legs, while keeping the feet stationary. We develop a software architecture that enables autonomous weed removal and integrate this system with all other required components. We analyze the accuracy and efficiency of the current proof of concept both in an indoor and outdoor environment and provide recommendations for future work to make the system more accurate and efficient.

Closest papers

Nearest neighbours by meaning across the whole index.

From Sky to Soil: A Morphing Aerial-Ground Robot for Seed Deployment

cs.RO ·2026-09-29 ·Namai Chandra, Lining Yao
similarity 0.60
Abstract · 9 pages, 6 figures

Aerial seed broadcasting can reach remote restoration sites, but provides limited control over seed placement within the soil. This paper presents a geometry-assisted, tri-functional morphing robot that combines aerial access, ground locomotion, and controlled-depth seed embedding in a fly-drive-plant architecture. After landing, the platform reconfigures into a four-wheeled planting configuration: an electronically coupled dual-motor drive folds the rear arms outward to form ground wheels, while a descending front tray engages the propulsion motors with a drill gear train. Reusing the propulsion motors for drilling eliminates a dedicated drill drive. The planting sequence forms a hole, dispenses a seed, and allows the vehicle to reposition on the ground or return to its flight configuration. Ground mobility supports repeated planting without requiring a separate flight between adjacent sites. A companion controller issues reconfiguration, tray, and seed-gate commands, while a dedicated autopilot handles flight control. The morphing and planting mechanisms are validated using a hardware prototype that demonstrates ground repositioning and seed embedding. This proof of concept establishes a hardware basis for aerial-ground seed embedding through coordinated reconfiguration and actuator reuse.

0.24

MOSS: Multimodal Origami Swamp Robot System

cs.RO ·2026-10-16 ·Tian Lan, Atar Babgei, Luca Romanello, Mirko Kovac, Sophie F. Armanini
similarity 0.57
Abstract · 8 pages, 8 figures, submitted to ICRA 2027

Robotic systems for environmental monitoring and ecological surveying in wetlands and swamps must operate across diverse terrestrial and aquatic conditions. Conventional fixed-geometry wheels cannot adapt their contact geometry to these varying conditions. This work presents MOSS (Multimodal Origami Swamp Robot System), a compact amphibious robotic platform with 3D-printed origami wheels. The compact crank mechanism switches the wheel between contracted and expanded configurations, changing its width, body diameter, and fin orientation simultaneously. The contracted configuration is better suited to efficient rolling on firmer ground, whereas the expanded configuration provides greater contact and terrain engagement on softer surfaces. MOSS was evaluated on soil, sand, mud with varying water content, and water, in addition to in-motion morphing and terrestrial-aquatic transition tests. The more energy-efficient wheel configuration depended on terrain. The contracted configuration achieved a lower cost of transport on firmer soil and mud, whereas the expanded configuration performed better on wetter mud, sand, and water, reducing the cost of transport by up to 29%. Expanded wheels also reduced slip in wet mud and reduced both slip and hub sinkage in sand. MOSS successfully completed configuration changes in $1.95 \pm 0.11$ s and demonstrated continuous locomotion across soil-mud-water transitions. Outdoor trials further demonstrated operation across natural deformable terrain and water. These results show that adaptive wheel geometry provides terrain-dependent locomotion benefits and enables a single compact platform to traverse substantially different terrestrial and aquatic conditions.

0.25

Agibot: An Open-Source Modular Swerve-Drive Robot Platform for Agricultural Robotics Research and Education

cs.RO cs.LGeess.SY ·2026-11-06 ·Moeen Ul Islam, Bishal Adhikari, Kori Edwards, Lorien Harvey, J. Alex Thomasson +1 more
code/data similarity 0.56
Abstract · 14 pages. Submitted to IEEE Transactions on AgriFood Electronics (TAFE)

Agricultural production faces persistent labor shortages and increasing demand for automation, yet progress in agricultural robotics remains constrained by the limited availability of affordable, flexible, and accessible research platforms. This paper presents Agibot, an open-source, modular, low-cost agricultural robotics platform designed for autonomy research and experimentation, with potential applications in hands-on robotics education. The platform integrates four-wheel independent swerve drive, swappable computing, distributed embedded control, multimodal sensing, and configurable manipulation within a unified sense-plan-act-verify framework supporting perception, control, navigation, manipulation, and autonomous task verification. The platform was evaluated through representative row-crop navigation and manipulation tasks under varying lighting and soil conditions. Experiments demonstrated reliable lane following, autonomous row-to-row navigation, target identification, seed dispensing, plant manipulation, and closed-loop verification of task success. Its modular architecture supports independent testing, modification, and validation of autonomy components for rapid prototyping and experimentation. These proof-of-concept tasks, controller-tuning studies, and integrated trials demonstrate the platform's research capabilities, while its accessible and reconfigurable design supports its use for hands-on robotics education. By combining affordability, modularity, open-source accessibility, configurable manipulation, and end-to-end sense-plan-act-verify autonomy, Agibot provides a practical platform for agricultural robotics research, technology development, and workforce training.

0.34

MARTS: A Modular Agricultural Robot for Targeted Spraying of Diseased Tomato Plants in Greenhouses

cs.RO ·2026-10-13 ·Rajmeet Singh, Manveen Kaur, Yusuf Adamu, Lochan Kshetrimayum, Irfan Hussain
similarity 0.56
Abstract · 28 pages, 11 figures, 5 tables

Broadcast spraying remains the dominant method of disease control in greenhouse tomato production, yet it treats healthy and diseased tissue alike, exposes workers to hazardous aerosols, and depends on operator skill. This paper presents MARTS (Modular Agricultural Robot for Targeted Spraying), a low-cost robotic platform that closes the loop from plant-level disease detection to leaf-localised spray delivery in commercial greenhouses. MARTS integrates a Clearpath Husky A200 mobile base, a UR5 manipulator, a novel modular spraying end-effector built around a single 12 V micro-diaphragm pump, and a wrist-mounted Intel RealSense D435 RGB-D camera. Disease detection reuses our previously published Tomato Leaf Disease Vision Language Model (TLDVLM; Grounding DINO, SAM-2 and LoRA-tuned BLIP-2, 97.27% accuracy over 10 classes); this work focuses on actuation, control and system integration. A ROS pipeline lifts detections into 3D targets, generates collision-aware nozzle poses at a 120 mm stand-off using fitted leaf normals, and scales pump pulse duration to lesion area. Water-sensitive paper calibration showed a linear pulse-volume relationship (R^2 = 0.994). In MuJoCo simulation, an adaptive base-repositioning strategy achieved 100% coverage of 18 waypoints with a maximum orientation error of 1.1 deg. Deployed at the SILAL commercial greenhouse (Al Ain, UAE) on cherry tomatoes under natural infection, MARTS treated 312 diseased leaves in 12 autonomous trials with 92.4% targeting success, 18.7 mm mean spray-centre error, 6.1% adjacent-leaf overspray, and a 71% reduction in pesticide volume versus broadcast spraying. Mean cycle time was 4.8 s per leaf, and the spraying subsystem costs USD 412, 6-10x lower than comparable systems, showing that accurate leaf-level targeting is achievable on commodity hardware.

0.29

Context-Aware Adaptive Pesticide Spraying for Agricultural Robots under Changing Weather and Terrain Using Vision-Language Models

cs.RO eess.SY ·2026-09-09 ·Cong-Thanh Vu, Yen-Chen Liu
published similarity 0.56
Abstract · Accepted for publication in Computers and Electronics in Agriculture

Precision pesticide spraying is essential for optimizing application efficiency and ensuring uniform chemical distribution. Spraying performance is influenced by multiple factors, including environmental conditions such as temperature and wind speed, pesticide type, and the robot's capability to accurately perceive crops and target spray locations. Existing approaches predominantly emphasize crop detection and rely on predefined spraying parameters, whereas human operators dynamically adjust their spraying strategies by considering environmental conditions, region-specific crop characteristics, and the type of pesticide being applied. In this study, we propose a context-aware adaptive spraying framework based on Vision-Language Models (VLMs), which enables robots to leverage spatial reasoning and integrate information from multiple sources, including crop type, pesticide type, and weather data, to make adaptive and optimized spraying decisions. Subsequently, a trajectory-tracking controller based on Model Predictive Path Integral (MPPI) control is employed to ensure precise navigation and accurate spraying at crop locations. The comparative results demonstrate that the proposed method improves accuracy by at least 30% in detecting crop rows. In addition, the experimental evaluations conducted in two environments further demonstrate the robot's ability to flexibly adjust spraying volume and travel speed, while reducing pesticide drift.

0.58

When Obstacles Bend: Modeling Vegetation Deformation in the context of Field Robotics

cs.RO ·2026-08-26 ·Zaar Khizar, Tom Montagnon, Roland Lenain, Romuald Aufrère, Johann Laconte
hot direction similarity 0.55
Abstract · 8 pages, 7 figures, submitted to IEEE Robotics and Automation Letters (RA-L)

Autonomous robots operating in natural environments must often interact with vegetation rather than simply avoid it. In this context, traversability is typically defined from the robot's perspective, by measuring how a specific platform responds when moving through the environment. While practical, this viewpoint entangles the assessment of the environment with the robot's own dynamics, making the resulting characterization difficult to transfer across different platforms. More importantly, it does not directly reflect the properties of the vegetation itself, which are the true source of interaction and potential damage in applications such as agriculture and environmental monitoring. To address this limitation, we propose to characterize vegetation through its intrinsic mechanical properties, independently of any specific robot. By combining deformation measurements with contact force data, we estimate the underlying mechanical parameters and reconstruct the vegetation's response to interaction. This enables vegetation-aware navigation based on intrinsic environmental properties rather than platform-dependent metrics.

0.34

Multi-Speed Field Evaluation of a Semi-Autonomous Precision Sprayer for Weed Control in Vegetable Crops

cs.CV ·2026-10-17 ·Md Khairul Islam, Boyang Deng, Yuzhen Lu, Daniel Brainard, Ajit Srivastava
similarity 0.54
Abstract · 16 pages, 5 figures, 7 tables

Machine vision-guided precision spraying is promising for sustainable vegetable production by enabling site-specific weed targeting, reducing herbicide application while protecting crop yield and quality. However, the effects of operating speed of sprayer systems on the integrated detection-tracking-actuation pipeline remain insufficiently characterized under field conditions. This study evaluated a semi-autonomous, tractor-based spraying system for targeted weed control in radish and quantified performance across three operating speeds. A five-season dataset comprising 10,599 images and 84,311 annotated instances across seven classes was curated for model development. A YOLOv11-medium model was integrated with ByteTrack tracking and a customized 12-nozzle sprayer on a semi-autonomous electric tractor. Field trials were conducted at 0.13, 0.27, and 0.45 m/s (i.e., 0.3, 0.6, and 1.0 mph) to characterize speed-dependent changes in weed detection, targeting, actuation, and crop damage. At the lowest speed of 0.13 m/s, the system achieved 94.6% mAP@50 and 93.2% recall for weed and crop detection. However, increasing platform speed substantially reduced system performance, with weed hit rate declining from 78.3% to 35.0% and crop contact rates increasing from 20.1% to 28.7%. Consequently, the system did not meet predefined commercial-viability thresholds. These results demonstrate that practical deployment requires improvements beyond weed detection alone, particularly coordinated improvements in motion-robust plant perception, spray-timing compensation, and crop-adjacent actuation precision. The identified performance bottlenecks provide specific engineering targets for advancing vision-guided precision spraying toward practical, high-speed vegetable weed management. The software programs developed in this study have been made publicly available to support future precision weeding research.

0.27

Active sensing to characterize the heterogeneity of plant stress

cs.RO cs.AI ·2026-08-27 ·Ayman Laaroussi, Peter Hanappe, David Colliaux
similarity 0.54
Abstract · UR2026

While most phenotyping platforms rely primarily on image-based measurements, advanced plant characterization requires the integration of active physiological sensing modali- ties such as chlorophyll fluorescence. We present an autonomous robotic platform designed to perform targeted fluorescence measurements on plant leaves. The system combines 3D plant reconstruction, geometric analysis, and motion planning to localize suitable measurement points and generate collision-free trajectories for a robotic manipulator. A dense 3D model of the plant is reconstructed from multi-view data and used to extract candidate leaf surfaces based on orientation, accessibility, and sensing constraints. These targets are then integrated into a task-level planning framework that guides the end-effector to precise contact or near-contact configurations required for point-based fluorescence acquisition. The platform enables automated, repeatable, and spatially resolved physiological measurements that go beyond passive imaging. By tightly coupling perception, geometric reasoning, and manipulation, the proposed system provides a robotics-driven approach to high-resolution plant phenotyping and opens new directions for autonomous agricultural inspection and plant-aware manipulation.

0.29