CS Paper Radar

MARTS: A Modular Agricultural Robot for Targeted Spraying of Diseased Tomato Plants in Greenhouses

Rajmeet Singh, Manveen Kaur, Yusuf Adamu, Lochan Kshetrimayum, Irfan Hussain

cs.RO ·submitted 2026-10-13 10:36 UTC · v1

Abstract

Broadcast spraying remains the dominant method of disease control in greenhouse tomato production, yet it treats healthy and diseased tissue alike, exposes workers to hazardous aerosols, and depends on operator skill. This paper presents MARTS (Modular Agricultural Robot for Targeted Spraying), a low-cost robotic platform that closes the loop from plant-level disease detection to leaf-localised spray delivery in commercial greenhouses. MARTS integrates a Clearpath Husky A200 mobile base, a UR5 manipulator, a novel modular spraying end-effector built around a single 12 V micro-diaphragm pump, and a wrist-mounted Intel RealSense D435 RGB-D camera. Disease detection reuses our previously published Tomato Leaf Disease Vision Language Model (TLDVLM; Grounding DINO, SAM-2 and LoRA-tuned BLIP-2, 97.27% accuracy over 10 classes); this work focuses on actuation, control and system integration. A ROS pipeline lifts detections into 3D targets, generates collision-aware nozzle poses at a 120 mm stand-off using fitted leaf normals, and scales pump pulse duration to lesion area. Water-sensitive paper calibration showed a linear pulse-volume relationship (R^2 = 0.994). In MuJoCo simulation, an adaptive base-repositioning strategy achieved 100% coverage of 18 waypoints with a maximum orientation error of 1.1 deg. Deployed at the SILAL commercial greenhouse (Al Ain, UAE) on cherry tomatoes under natural infection, MARTS treated 312 diseased leaves in 12 autonomous trials with 92.4% targeting success, 18.7 mm mean spray-centre error, 6.1% adjacent-leaf overspray, and a 71% reduction in pesticide volume versus broadcast spraying. Mean cycle time was 4.8 s per leaf, and the spraying subsystem costs USD 412, 6-10x lower than comparable systems, showing that accurate leaf-level targeting is achievable on commodity hardware.

Comment
28 pages, 11 figures, 5 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Multi-Speed Field Evaluation of a Semi-Autonomous Precision Sprayer for Weed Control in Vegetable Crops

cs.CV ·2026-10-17 ·Md Khairul Islam, Boyang Deng, Yuzhen Lu, Daniel Brainard, Ajit Srivastava
similarity 0.64
Abstract · 16 pages, 5 figures, 7 tables

Machine vision-guided precision spraying is promising for sustainable vegetable production by enabling site-specific weed targeting, reducing herbicide application while protecting crop yield and quality. However, the effects of operating speed of sprayer systems on the integrated detection-tracking-actuation pipeline remain insufficiently characterized under field conditions. This study evaluated a semi-autonomous, tractor-based spraying system for targeted weed control in radish and quantified performance across three operating speeds. A five-season dataset comprising 10,599 images and 84,311 annotated instances across seven classes was curated for model development. A YOLOv11-medium model was integrated with ByteTrack tracking and a customized 12-nozzle sprayer on a semi-autonomous electric tractor. Field trials were conducted at 0.13, 0.27, and 0.45 m/s (i.e., 0.3, 0.6, and 1.0 mph) to characterize speed-dependent changes in weed detection, targeting, actuation, and crop damage. At the lowest speed of 0.13 m/s, the system achieved 94.6% mAP@50 and 93.2% recall for weed and crop detection. However, increasing platform speed substantially reduced system performance, with weed hit rate declining from 78.3% to 35.0% and crop contact rates increasing from 20.1% to 28.7%. Consequently, the system did not meet predefined commercial-viability thresholds. These results demonstrate that practical deployment requires improvements beyond weed detection alone, particularly coordinated improvements in motion-robust plant perception, spray-timing compensation, and crop-adjacent actuation precision. The identified performance bottlenecks provide specific engineering targets for advancing vision-guided precision spraying toward practical, high-speed vegetable weed management. The software programs developed in this study have been made publicly available to support future precision weeding research.

0.27

Agri-Sim: Agricultural Simulation Platform for Embodied Intelligence Evaluation in Greenhouse Robotics

cs.RO ·2026-08-29 ·Shuhan Shi, Zhenfeng Xue, Minghao Mei, Chao Zheng, Nan Li +1 more
similarity 0.62
Abstract · 13 pages, 9 figures, and 5 tables

Agricultural-robot development requires simulation environments that can jointly support realistic scene construction, virtual sensing, autonomous navigation, motion planning, and manipulation-task execution. This paper presents Agri-Sim, a Unity and ROS2-based simulation platform for the closed-loop development and functional evaluation of agricultural robots. The platform contains a configurable tomato-greenhouse environment, a mobile dual-arm harvesting robot, virtual RGB-D, LiDAR, IMU, and joint sensors, and a bidirectional communication interface between Unity and ROS2. Unity is responsible for scene rendering, rigid-body dynamics, collision detection, virtual sensing, and task-state execution, whereas ROS2 and MoveIt 2 provide localization, navigation, collision-aware motion planning, inverse kinematics, and trajectory generation. Autonomous greenhouse navigation and dual-arm tomato harvesting were used to evaluate the complete simulation workflow. The experiments covered virtual sensor publication, ROS2-based navigation, collision-aware motion planning, mobile-base control, tomato acquisition, inter-arm handover, and box placement. The results demonstrate that Agri-Sim supports closed-loop integration and repeatable functional evaluation of navigation and manipulation workflows in a controlled virtual greenhouse, providing a practical foundation for subsequent algorithm development and Sim-to-Real studies.

0.32

Context-Aware Adaptive Pesticide Spraying for Agricultural Robots under Changing Weather and Terrain Using Vision-Language Models

cs.RO eess.SY ·2026-09-09 ·Cong-Thanh Vu, Yen-Chen Liu
published similarity 0.62
Abstract · Accepted for publication in Computers and Electronics in Agriculture

Precision pesticide spraying is essential for optimizing application efficiency and ensuring uniform chemical distribution. Spraying performance is influenced by multiple factors, including environmental conditions such as temperature and wind speed, pesticide type, and the robot's capability to accurately perceive crops and target spray locations. Existing approaches predominantly emphasize crop detection and rely on predefined spraying parameters, whereas human operators dynamically adjust their spraying strategies by considering environmental conditions, region-specific crop characteristics, and the type of pesticide being applied. In this study, we propose a context-aware adaptive spraying framework based on Vision-Language Models (VLMs), which enables robots to leverage spatial reasoning and integrate information from multiple sources, including crop type, pesticide type, and weather data, to make adaptive and optimized spraying decisions. Subsequently, a trajectory-tracking controller based on Model Predictive Path Integral (MPPI) control is employed to ensure precise navigation and accurate spraying at crop locations. The comparative results demonstrate that the proposed method improves accuracy by at least 30% in detecting crop rows. In addition, the experimental evaluations conducted in two environments further demonstrate the robot's ability to flexibly adjust spraying volume and travel speed, while reducing pesticide drift.

0.58

Active sensing to characterize the heterogeneity of plant stress

cs.RO cs.AI ·2026-08-27 ·Ayman Laaroussi, Peter Hanappe, David Colliaux
similarity 0.61
Abstract · UR2026

While most phenotyping platforms rely primarily on image-based measurements, advanced plant characterization requires the integration of active physiological sensing modali- ties such as chlorophyll fluorescence. We present an autonomous robotic platform designed to perform targeted fluorescence measurements on plant leaves. The system combines 3D plant reconstruction, geometric analysis, and motion planning to localize suitable measurement points and generate collision-free trajectories for a robotic manipulator. A dense 3D model of the plant is reconstructed from multi-view data and used to extract candidate leaf surfaces based on orientation, accessibility, and sensing constraints. These targets are then integrated into a task-level planning framework that guides the end-effector to precise contact or near-contact configurations required for point-based fluorescence acquisition. The platform enables automated, repeatable, and spatially resolved physiological measurements that go beyond passive imaging. By tightly coupling perception, geometric reasoning, and manipulation, the proposed system provides a robotics-driven approach to high-resolution plant phenotyping and opens new directions for autonomous agricultural inspection and plant-aware manipulation.

0.29

An Ordering Optimization for Fruit-Vegetable in High-Density Environment based on Genetic Algorithm

cs.RO eess.SY ·2026-11-05 ·Jaehwi Seol, Jeonghyeon Pak, Hyoung Il Son
similarity 0.60
Abstract · 39 pages, 11 figures

This paper presents a robotic harvesting method that combines RGB-D fruit localization, GA-based harvest ordering, and waypoint-based robot motion in dense and unstructured crop environments. The global RGB-D camera provides 3D fruit positions for ordering, while the end-effector-mounted camera provides close-range observation during execution. The GA determines the harvesting sequence, and static or dynamic waypoints define the intermediate robot motion. The method was evaluated in a controlled laboratory testbed and in four-, five-, and six-fruit field conditions. GA solutions were compared with exhaustive enumeration, and both waypoint offsets were examined by parameter sensitivity analysis. Continuous execution reduced unnecessary Home-return motion, while the dynamic waypoint changed with the remaining fruit distribution without changing the GA sequence. In the field evaluation, the dynamic-waypoint continuous strategy produced 40 collision events and a 70.7% target-approach success rate, compared with 55 collision events and 65.3% for the static-waypoint continuous strategy.

0.28

Remote Human-Robot Interaction In Greenhouses via Virtual Reality: How Plant Canopy Structure Affects Leaf Disease and Soil Moisture Inspection

cs.RO eess.SY ·2026-08-27 ·Daniel Udekwe, Hasan Seyyedhasani
similarity 0.59
Abstract

This study evaluates the effectiveness of remote human-robot interaction using virtual reality for leaf inspection and soil moisture assessment in a greenhouse environment. The robotic system comprised an unmanned ground vehicle and a robotic manipulator equipped with cameras, governed by kinematic models for navigation and manipulator control. Fourteen distinct plants were inspected across two experiments utilizing VR teleoperation, guided by a set of pre-specified research questions and hypotheses. In the leaf inspection experiments, cycle completion times varied from 3.3 to 8.0 s, and plant-based disease detection was achieved up to 88% accuracy; diseased-spot detection improved numerically in the second experiment, though this change was not statistically significant (p=0.378). For soil moisture assessment, the experiments achieved successful determination of watering needs in up to 64.3% of plants (9 of 14), with consistent success observed for plants 1, 2, 3, 8, 9, 10, and 13; however, this improvement was likewise not statistically significant (p=0.50). A post hoc analysis instead revealed that soil moisture assessment reliability was strongly and significantly predicted by plant canopy morphology (p<0.01): plants with broad, single-leaf canopies reached 100% success by the second experiment, versus only 16.7% for dense, compound canopies. A secondary analysis showed operators became measurably faster at attempting dense-canopy plants without a corresponding gain in success, indicating that camera occlusion, not operator skill or effort, is the dominant limiting factor. These findings show occlusion imposes a sensing limitation rather than a control or training deficiency, and that adapting camera viewpoint and sensing strategy to canopy density is needed to improve the system's accuracy and robustness.

0.35

Visual-SLAM for the detection of hidden tomatoes in greenhouses by Hierarchical Localization and GLOMAP for robotized harvesting

cs.RO ·2026-09-10 ·Fernando Cañadas-Aránega, José C. Moreno, José L. Blanco-Claraco, Francisco Rodríguez
similarity 0.58
Abstract

Advanced crop monitoring inside greenhouses is becoming one of the primary objectives of research centers. High-performance sensors, such as LiDAR or stereo cameras, have traditionally been employed for this purpose, though these often have a high cost. This work proposes a Visual-SLAM system using a monocular camera, which is significantly more cost-effective and specifically tailored for agricultural applications, such as mapping tomato crops in a greenhouse. Tests were carried out on a real tomato bunch, located in the Agroconnect experimental greenhouse. A ROS 2 Humble node was developed to run on the robot in order to capture images of these crops, which were then stored for offline processing. To generate a 3D mapped model for the crop in the greenhouse, the GLOMAP mapper, based on Structure-From-Motion, was integrated with the Hierarchical Localization toolbox. This initial mapping is a foundation for future, more advanced algorithms to analyze growth patterns, and optimize agricultural management. The system leverages a hierarchical localization paradigm based on a coarse-to-fine strategy: it first performs global retrieval to generate location hypotheses, then combines local features within the identified candidate regions. The results show a correct identification of the tomato cluster, correctly characterising the tomato that is occluded and inaccessible by classical vision technologies. The reconstructed 3D model was further validated against manual ground-truth measurements of fruit size, centroid position, and orientation, confirming the geometric accuracy of the proposed low-cost monocular pipeline.

0.33

ALFRED: Requirement-driven development of an open-source mobile manipulator for long-term plant monitoring

cs.RO cs.ARcs.CV ·2026-10-01 ·Ciarán Miceal Johnson, Christopher Quail, Garry Ellard, Alistair McConnell, Steve Tonneau +1 more
code/data similarity 0.57
Abstract · 36 pages, 19 figures

Tracking seasonal change in crops and forests requires observing the same plants repeatedly. Ground robots can do this at close range, and a manipulator gives their sensors more viewpoints. Yet the robots behind long-term field datasets are rarely released with their design files, and how a robot's own structure limits arm reach and occludes its sensors is seldom compared between builds. We present ALFRED, an open-source mobile manipulator built from commercially available components. It carries a six-degree-of-freedom arm, LiDAR, RGB-D cameras, RTK GNSS and an IMU on an Ackermann-steered base, all mounted on a reconfigurable aluminium strut frame, and runs containerised ROS software. It was developed through four builds against six requirements for repeated outdoor deployment: durability, modularity, repairability, sensing reach, endurance and reproducibility. Model-based analysis of the last three builds shows the usable share of the arm's reachable poses rising from 34.0% to 60.0% and then 66.1%, and ray casting shows that only the final build keeps the frame-mounted LiDAR's horizontal view clear both forwards and backwards. ALFRED completed a year of monthly forest surveys (528 traversals) without missing a scheduled collection. This was despite battery degradation, reconfiguration for another researcher's study, and the parallel development of ALFRED 2.0 for autonomous crop-row operation, with each switch between builds taking about six hours. The deployment also showed that mechanical modularity is only as dependable as the robot description that tracks it.

0.36