CS Paper Radar

Agri-Sim: Agricultural Simulation Platform for Embodied Intelligence Evaluation in Greenhouse Robotics

Shuhan Shi, Zhenfeng Xue, Minghao Mei, Chao Zheng, Nan Li, Zhonghua Miao

cs.RO ·submitted 2026-08-29 07:12 UTC · v1

Abstract

Agricultural-robot development requires simulation environments that can jointly support realistic scene construction, virtual sensing, autonomous navigation, motion planning, and manipulation-task execution. This paper presents Agri-Sim, a Unity and ROS2-based simulation platform for the closed-loop development and functional evaluation of agricultural robots. The platform contains a configurable tomato-greenhouse environment, a mobile dual-arm harvesting robot, virtual RGB-D, LiDAR, IMU, and joint sensors, and a bidirectional communication interface between Unity and ROS2. Unity is responsible for scene rendering, rigid-body dynamics, collision detection, virtual sensing, and task-state execution, whereas ROS2 and MoveIt 2 provide localization, navigation, collision-aware motion planning, inverse kinematics, and trajectory generation. Autonomous greenhouse navigation and dual-arm tomato harvesting were used to evaluate the complete simulation workflow. The experiments covered virtual sensor publication, ROS2-based navigation, collision-aware motion planning, mobile-base control, tomato acquisition, inter-arm handover, and box placement. The results demonstrate that Agri-Sim supports closed-loop integration and repeatable functional evaluation of navigation and manipulation workflows in a controlled virtual greenhouse, providing a practical foundation for subsequent algorithm development and Sim-to-Real studies.

Comment
13 pages, 9 figures, and 5 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Agibot: An Open-Source Modular Swerve-Drive Robot Platform for Agricultural Robotics Research and Education

cs.RO cs.LGeess.SY ·2026-11-06 ·Moeen Ul Islam, Bishal Adhikari, Kori Edwards, Lorien Harvey, J. Alex Thomasson +1 more
code/data similarity 0.72
Abstract · 14 pages. Submitted to IEEE Transactions on AgriFood Electronics (TAFE)

Agricultural production faces persistent labor shortages and increasing demand for automation, yet progress in agricultural robotics remains constrained by the limited availability of affordable, flexible, and accessible research platforms. This paper presents Agibot, an open-source, modular, low-cost agricultural robotics platform designed for autonomy research and experimentation, with potential applications in hands-on robotics education. The platform integrates four-wheel independent swerve drive, swappable computing, distributed embedded control, multimodal sensing, and configurable manipulation within a unified sense-plan-act-verify framework supporting perception, control, navigation, manipulation, and autonomous task verification. The platform was evaluated through representative row-crop navigation and manipulation tasks under varying lighting and soil conditions. Experiments demonstrated reliable lane following, autonomous row-to-row navigation, target identification, seed dispensing, plant manipulation, and closed-loop verification of task success. Its modular architecture supports independent testing, modification, and validation of autonomy components for rapid prototyping and experimentation. These proof-of-concept tasks, controller-tuning studies, and integrated trials demonstrate the platform's research capabilities, while its accessible and reconfigurable design supports its use for hands-on robotics education. By combining affordability, modularity, open-source accessibility, configurable manipulation, and end-to-end sense-plan-act-verify autonomy, Agibot provides a practical platform for agricultural robotics research, technology development, and workforce training.

0.34

AgriSense: Vision-Language Decision Support and Robotic Intervention in a Virtual Greenhouse Copy title

cs.RO cs.AIcs.CV ·2026-11-12 ·Lyes Saad Saoud, Oualid Doukhi, Reza Ghorbani, Moussa Ayyash
similarity 0.66
Abstract

Autonomous greenhouse management increasingly requires robotic systems that integrate perception, navigation, environmental regulation, and plant-level intervention. This paper presents AgriSense, a framework combining an Isaac Sim virtual greenhouse, a quadruped mobile manipulator, RGB and LiDAR-inertial sensing, environmental control, and supervised vision-language decision support. Frozen DINOv2 and BERT encoders, together with structured environmental inputs, support joint prediction of twelve environmental references, a target zone, and an intervention flag. Checkpoint replay reproduces 41/43 zone decisions. Across five seeds on a source-grouped test set, the full, image-removed, and language-removed configurations each achieve 43/44 correct zone decisions, providing no evidence of incremental multimodal zone-accuracy improvement. The full model achieves mean absolute errors of 0.249 degrees C for temperature, 2.030 percentage points for humidity, and 0.997 percentage points for soil moisture. Sensor-only inputs match full-model zone accuracy, while language-only inputs achieve 68.64%. External real-image benchmarks reveal distribution-shift limitations. Five offline Point-LIO routes yield rigidly aligned trajectory errors of 5.22-17.32 mm. Of 40 virtual-arm targets, 32 satisfy geometric acceptance criteria and eight are rejected at boundaries. Six long-horizon climate cases and fault protocols characterize integration limits. Navigation and integrated treatment rely on simulator-state inputs; physical greenhouse performance and agronomic treatment efficacy remain unvalidated. The contribution is an evaluated decision-support and robotic-intervention framework for a virtual greenhouse.

0.15

AgriGen: Large-Scale Scene Generation Framework for Photorealistic Agricultural Robotics Simulation

cs.RO cs.GR ·2026-09-22 ·Utkarsh Bajpai, Serge Tleiji, Cédric Pradalier, Stéphanie Aravecchia
publishedcode/data similarity 0.66
Abstract · Presented at the ICRA 2026 Workshop on Agricultural Robotics (https://agrifoodroboticsworkshop.wordpress.com/icra2026/)

Agricultural robotics is advancing rapidly, yet progress remains constrained by limited field access, lack of control over field conditions, geographic variability, and seasonal crop cycles. These factors make it difficult and costly to acquire diverse agricultural datasets, resulting in limited evaluation and reduced system robustness. While other robotics domains have scaled learning and evaluation through high-fidelity simulation, agricultural robotics still lacks comparably capable tools. In this paper, we present a ROS-integrated framework, built on Isaac Sim, for large-scale procedural generation of agricultural environments. The framework supports photorealistic rendering, physics simulation, and domain randomization at scales relevant to robotics research, with built-in support for row crops, orchards, and vineyards and straightforward extensibility to additional crop categories. Project Page: https://baj31415.github.io/agrigen/

0.33

Remote Human-Robot Interaction In Greenhouses via Virtual Reality: How Plant Canopy Structure Affects Leaf Disease and Soil Moisture Inspection

cs.RO eess.SY ·2026-08-27 ·Daniel Udekwe, Hasan Seyyedhasani
similarity 0.64
Abstract

This study evaluates the effectiveness of remote human-robot interaction using virtual reality for leaf inspection and soil moisture assessment in a greenhouse environment. The robotic system comprised an unmanned ground vehicle and a robotic manipulator equipped with cameras, governed by kinematic models for navigation and manipulator control. Fourteen distinct plants were inspected across two experiments utilizing VR teleoperation, guided by a set of pre-specified research questions and hypotheses. In the leaf inspection experiments, cycle completion times varied from 3.3 to 8.0 s, and plant-based disease detection was achieved up to 88% accuracy; diseased-spot detection improved numerically in the second experiment, though this change was not statistically significant (p=0.378). For soil moisture assessment, the experiments achieved successful determination of watering needs in up to 64.3% of plants (9 of 14), with consistent success observed for plants 1, 2, 3, 8, 9, 10, and 13; however, this improvement was likewise not statistically significant (p=0.50). A post hoc analysis instead revealed that soil moisture assessment reliability was strongly and significantly predicted by plant canopy morphology (p<0.01): plants with broad, single-leaf canopies reached 100% success by the second experiment, versus only 16.7% for dense, compound canopies. A secondary analysis showed operators became measurably faster at attempting dense-canopy plants without a corresponding gain in success, indicating that camera occlusion, not operator skill or effort, is the dominant limiting factor. These findings show occlusion imposes a sensing limitation rather than a control or training deficiency, and that adapting camera viewpoint and sensing strategy to canopy density is needed to improve the system's accuracy and robustness.

0.35

An Ordering Optimization for Fruit-Vegetable in High-Density Environment based on Genetic Algorithm

cs.RO eess.SY ·2026-11-05 ·Jaehwi Seol, Jeonghyeon Pak, Hyoung Il Son
similarity 0.64
Abstract · 39 pages, 11 figures

This paper presents a robotic harvesting method that combines RGB-D fruit localization, GA-based harvest ordering, and waypoint-based robot motion in dense and unstructured crop environments. The global RGB-D camera provides 3D fruit positions for ordering, while the end-effector-mounted camera provides close-range observation during execution. The GA determines the harvesting sequence, and static or dynamic waypoints define the intermediate robot motion. The method was evaluated in a controlled laboratory testbed and in four-, five-, and six-fruit field conditions. GA solutions were compared with exhaustive enumeration, and both waypoint offsets were examined by parameter sensitivity analysis. Continuous execution reduced unnecessary Home-return motion, while the dynamic waypoint changed with the remaining fruit distribution without changing the GA sequence. In the field evaluation, the dynamic-waypoint continuous strategy produced 40 collision events and a 70.7% target-approach success rate, compared with 55 collision events and 65.3% for the static-waypoint continuous strategy.

0.28

Visual-SLAM for the detection of hidden tomatoes in greenhouses by Hierarchical Localization and GLOMAP for robotized harvesting

cs.RO ·2026-09-10 ·Fernando Cañadas-Aránega, José C. Moreno, José L. Blanco-Claraco, Francisco Rodríguez
similarity 0.64
Abstract

Advanced crop monitoring inside greenhouses is becoming one of the primary objectives of research centers. High-performance sensors, such as LiDAR or stereo cameras, have traditionally been employed for this purpose, though these often have a high cost. This work proposes a Visual-SLAM system using a monocular camera, which is significantly more cost-effective and specifically tailored for agricultural applications, such as mapping tomato crops in a greenhouse. Tests were carried out on a real tomato bunch, located in the Agroconnect experimental greenhouse. A ROS 2 Humble node was developed to run on the robot in order to capture images of these crops, which were then stored for offline processing. To generate a 3D mapped model for the crop in the greenhouse, the GLOMAP mapper, based on Structure-From-Motion, was integrated with the Hierarchical Localization toolbox. This initial mapping is a foundation for future, more advanced algorithms to analyze growth patterns, and optimize agricultural management. The system leverages a hierarchical localization paradigm based on a coarse-to-fine strategy: it first performs global retrieval to generate location hypotheses, then combines local features within the identified candidate regions. The results show a correct identification of the tomato cluster, correctly characterising the tomato that is occluded and inaccessible by classical vision technologies. The reconstructed 3D model was further validated against manual ground-truth measurements of fruit size, centroid position, and orientation, confirming the geometric accuracy of the proposed low-cost monocular pipeline.

0.33

MARTS: A Modular Agricultural Robot for Targeted Spraying of Diseased Tomato Plants in Greenhouses

cs.RO ·2026-10-13 ·Rajmeet Singh, Manveen Kaur, Yusuf Adamu, Lochan Kshetrimayum, Irfan Hussain
similarity 0.62
Abstract · 28 pages, 11 figures, 5 tables

Broadcast spraying remains the dominant method of disease control in greenhouse tomato production, yet it treats healthy and diseased tissue alike, exposes workers to hazardous aerosols, and depends on operator skill. This paper presents MARTS (Modular Agricultural Robot for Targeted Spraying), a low-cost robotic platform that closes the loop from plant-level disease detection to leaf-localised spray delivery in commercial greenhouses. MARTS integrates a Clearpath Husky A200 mobile base, a UR5 manipulator, a novel modular spraying end-effector built around a single 12 V micro-diaphragm pump, and a wrist-mounted Intel RealSense D435 RGB-D camera. Disease detection reuses our previously published Tomato Leaf Disease Vision Language Model (TLDVLM; Grounding DINO, SAM-2 and LoRA-tuned BLIP-2, 97.27% accuracy over 10 classes); this work focuses on actuation, control and system integration. A ROS pipeline lifts detections into 3D targets, generates collision-aware nozzle poses at a 120 mm stand-off using fitted leaf normals, and scales pump pulse duration to lesion area. Water-sensitive paper calibration showed a linear pulse-volume relationship (R^2 = 0.994). In MuJoCo simulation, an adaptive base-repositioning strategy achieved 100% coverage of 18 waypoints with a maximum orientation error of 1.1 deg. Deployed at the SILAL commercial greenhouse (Al Ain, UAE) on cherry tomatoes under natural infection, MARTS treated 312 diseased leaves in 12 autonomous trials with 92.4% targeting success, 18.7 mm mean spray-centre error, 6.1% adjacent-leaf overspray, and a 71% reduction in pesticide volume versus broadcast spraying. Mean cycle time was 4.8 s per leaf, and the spraying subsystem costs USD 412, 6-10x lower than comparable systems, showing that accurate leaf-level targeting is achievable on commodity hardware.

0.29

From Vision to Harvest: Benchmarking Vision-Language Models for Multi-Arm Robotic Fruit Harvesting

cs.RO cs.CV ·2026-09-11 ·Vrishan Inukollu, Adyan Zaman, Anvi Kudaraya, Carlos Lazcano, Yuankai Zhu +2 more
benchmark similarity 0.61
Abstract

Multi-arm robotic harvesting offers a promising path to improve harvesting efficiency and reduce reliance on manual labor. However, practical deployment remains challenging because the system must generalize across diverse environments while efficiently coordinating multiple arms in a shared workspace. Existing methods often require substantial data collection in target environments or rely on simplifying assumptions that limit planning quality. In this work, we introduce the first comprehensive benchmark for evaluating pretrained Vision-Language Models (VLMs) on zero-shot multi-arm fruit harvesting planning. Our benchmark uses real-world apple and citrus orchard images and compares a VLM-based planning pipeline with a traditional perception-and-planning pipeline. The VLM pipeline directly generates harvesting sequences and waypoints for each arm, while a lightweight trajectory verifier checks for collisions. Our results show that frontier VLMs can generate effective multi-arm harvesting plans zero-shot, but a practical deployment remains limited by accurate 3D waypoint generation and collision-aware coordination. These results highlight both the promise and current limitations of pretrained VLMs for multi-arm robotic harvesting.

0.28