CS Paper Radar

An Ordering Optimization for Fruit-Vegetable in High-Density Environment based on Genetic Algorithm

Jaehwi Seol, Jeonghyeon Pak, Hyoung Il Son

cs.RO eess.SY ·submitted 2026-11-05 01:14 UTC · v1

Abstract

This paper presents a robotic harvesting method that combines RGB-D fruit localization, GA-based harvest ordering, and waypoint-based robot motion in dense and unstructured crop environments. The global RGB-D camera provides 3D fruit positions for ordering, while the end-effector-mounted camera provides close-range observation during execution. The GA determines the harvesting sequence, and static or dynamic waypoints define the intermediate robot motion. The method was evaluated in a controlled laboratory testbed and in four-, five-, and six-fruit field conditions. GA solutions were compared with exhaustive enumeration, and both waypoint offsets were examined by parameter sensitivity analysis. Continuous execution reduced unnecessary Home-return motion, while the dynamic waypoint changed with the remaining fruit distribution without changing the GA sequence. In the field evaluation, the dynamic-waypoint continuous strategy produced 40 collision events and a 70.7% target-approach success rate, compared with 55 collision events and 65.3% for the static-waypoint continuous strategy.

Comment
39 pages, 11 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Active perception for robotic harvesting: 3D reconstruction and localisation of tomatoes hidden within clusters in a Mediterranean greenhouse

cs.RO ·2026-09-16 ·Fernando Cañadas-Aránega, Rowan Border, José C. Moreno, José L. Blanco-Claraco
similarity 0.68
Abstract

Automating robotic harvesting in intensive agriculture within Mediterranean greenhouses requires overcoming significant challenges related to the geometric complexity of plants and occluded fruits. Although existing literature offers solutions targeting crops that grow in isolation (e.g., apples, sweet peppers, or peaches), the fundamental challenge lies in cluster-growing vegetables, where fixed sensors mounted on robotic systems fail to detect fruits hidden behind the visible surface. To address this limitation, this study presents a comprehensive pipeline for the 3D reconstruction and precise localization of each fruit within a cluster, including heavily occluded instances. The proposed methodology is structured into five sequential stages: i) point cloud acquisition using the AgriSEE Next Best View (NBV) active planner; ii) stochastic noise filtering via Statistical Outlier Removal (SOR); iii) surface classification and segmentation using Region Growing (RG); iv) isolation and recovery of occluded fruits through Density-Based Spatial Clustering of Applications with Noise (DBSCAN); and v) 3D pose estimation (position and orientation). This approach extracts the complete cluster geometry, ensuring the reliable identification of partially hidden tomatoes. Evaluated across multiple scenarios with varying occlusion levels within a simulation framework rigorously validated against real-world conditions, the system achieves a precision exceeding 90\%, an average recall of 82.8\%, and a mean Intersection over Union (mIoU) of 80.7\%. Furthermore, it demonstrates high repeatability in centroid estimation with a Root Mean Square Error (RMSE) of merely 4.2~mm, verifying its technical feasibility and high accuracy for autonomous harvesting operations.

0.15

Agri-Sim: Agricultural Simulation Platform for Embodied Intelligence Evaluation in Greenhouse Robotics

cs.RO ·2026-08-29 ·Shuhan Shi, Zhenfeng Xue, Minghao Mei, Chao Zheng, Nan Li +1 more
similarity 0.64
Abstract · 13 pages, 9 figures, and 5 tables

Agricultural-robot development requires simulation environments that can jointly support realistic scene construction, virtual sensing, autonomous navigation, motion planning, and manipulation-task execution. This paper presents Agri-Sim, a Unity and ROS2-based simulation platform for the closed-loop development and functional evaluation of agricultural robots. The platform contains a configurable tomato-greenhouse environment, a mobile dual-arm harvesting robot, virtual RGB-D, LiDAR, IMU, and joint sensors, and a bidirectional communication interface between Unity and ROS2. Unity is responsible for scene rendering, rigid-body dynamics, collision detection, virtual sensing, and task-state execution, whereas ROS2 and MoveIt 2 provide localization, navigation, collision-aware motion planning, inverse kinematics, and trajectory generation. Autonomous greenhouse navigation and dual-arm tomato harvesting were used to evaluate the complete simulation workflow. The experiments covered virtual sensor publication, ROS2-based navigation, collision-aware motion planning, mobile-base control, tomato acquisition, inter-arm handover, and box placement. The results demonstrate that Agri-Sim supports closed-loop integration and repeatable functional evaluation of navigation and manipulation workflows in a controlled virtual greenhouse, providing a practical foundation for subsequent algorithm development and Sim-to-Real studies.

0.32

Sim-to-Real Reinforcement Learning for Path-Safe Target Reaching in Robotic Harvesting of Hydroponic Lettuce

cs.RO ·2026-10-15 ·Al Bashir, Partho Ghose, Yibin Wang, Robert G. Hardin, Joshua Peeples +2 more
benchmark similarity 0.63
Abstract

Robotic harvesting requires precise manipulation to ensure accurate positioning of the end-effector, especially in a constraint workspace. This study introduces the Path-Safe Approach Proximal Policy Optimization (PSA-PPO), a target-conditioned local reaching framework designed for robotic harvesting of nutrient film technique (NFT)-hydroponic lettuce in greenhouses. The proposed PSA-PPO preserves the standard clipped PPO objective while introducing a harvesting-oriented policy formulation that integrates target-conditioned observations, corridor-aware spatial constraints, trajectory-history-based safety encoding, and task-specific success criteria for constrained robotic manipulation. PSAPPO was trained entirely in Isaac Lab and successfully transferred to a physical UR10e robotic arm without any real-world policy fine-tuning. In a controlled physical benchmark against 150 scheduled targets, PSA-PPO achieved the highest reaching rate of 94.7%, outperforming Cartesian+TOTG (86.0%), RRTConnect (88.0%), and RRT* (80.0%), while reducing median RMS jerk by 39.8 to 73.0% relative to the classical planners during the final approach segment. A formulation ablation evaluated over 200 simulation targets demonstrates that path-safety and side-corridor shaping are the principal drivers of harvesting-compatible performance: removing either term substantially degrades strict success even when terminal endpoint accuracy is preserved or improved, confirming that optimization toward the endpoint alone is an insufficient objective for constrained crop-proximal manipulation. Finally, PSA-PPO was integrated with an RGB-D vision module and an end-effector and evaluated as a complete greenhouse harvesting system across 144 lettuce harvesting attempts, achieving 94.4% vision-guided target reaching and 86.1% complete harvesting success.

0.16

Visual-SLAM for the detection of hidden tomatoes in greenhouses by Hierarchical Localization and GLOMAP for robotized harvesting

cs.RO ·2026-09-10 ·Fernando Cañadas-Aránega, José C. Moreno, José L. Blanco-Claraco, Francisco Rodríguez
similarity 0.63
Abstract

Advanced crop monitoring inside greenhouses is becoming one of the primary objectives of research centers. High-performance sensors, such as LiDAR or stereo cameras, have traditionally been employed for this purpose, though these often have a high cost. This work proposes a Visual-SLAM system using a monocular camera, which is significantly more cost-effective and specifically tailored for agricultural applications, such as mapping tomato crops in a greenhouse. Tests were carried out on a real tomato bunch, located in the Agroconnect experimental greenhouse. A ROS 2 Humble node was developed to run on the robot in order to capture images of these crops, which were then stored for offline processing. To generate a 3D mapped model for the crop in the greenhouse, the GLOMAP mapper, based on Structure-From-Motion, was integrated with the Hierarchical Localization toolbox. This initial mapping is a foundation for future, more advanced algorithms to analyze growth patterns, and optimize agricultural management. The system leverages a hierarchical localization paradigm based on a coarse-to-fine strategy: it first performs global retrieval to generate location hypotheses, then combines local features within the identified candidate regions. The results show a correct identification of the tomato cluster, correctly characterising the tomato that is occluded and inaccessible by classical vision technologies. The reconstructed 3D model was further validated against manual ground-truth measurements of fruit size, centroid position, and orientation, confirming the geometric accuracy of the proposed low-cost monocular pipeline.

0.33

HarvestPoint-ACT: Explicit Target Selection and Harvest-Point Conditioning for Robotic Fruit Harvesting under Occlusion

cs.RO ·2026-08-19 ·Hanying Hu, Weipeng Li, Yikun Huang, Hao Chen, Zhengtao Hu +2 more
similarity 0.62
Abstract · Submit to IEEE ROBIO 2026

End-to-end imitation learning avoids hand-made robot motion for approaching and grasping, but the policy must still decide which fruit to pick and where to close the gripper. Occlusion can make the policy lose the selected fruit during harvesting, and the correct closing point is difficult to infer from pixels alone. This paper presents HarvestPoint-ACT, which makes both decisions explicit in perception and provides them to the policy. An instance segmentation front end with a keypoint branch predicts a mask and a harvest point for each visible fruit, where the harvest point specifies the location to close the gripper. A scheduler ranks detected candidates by occlusion and travel distance and selects one target. After each attempt, it redetects and reranks the candidates because the canopy may have changed. The selected fruit is encoded for an action chunking transformer as an eight-dimensional state, containing the absolute harvest point, the vector from the gripper to that point, a validity flag, and a confidence score. When the selected fruit is temporarily undetected, the system retains the last harvest point estimate in the robot base frame and marks it as stale, and aborts the attempt if the loss persists. On a canopy mock-up, HarvestPoint-ACT achieves a success rate of 88%, and of 75% under heavy occlusion.

0.30

From Vision to Harvest: Benchmarking Vision-Language Models for Multi-Arm Robotic Fruit Harvesting

cs.RO cs.CV ·2026-09-11 ·Vrishan Inukollu, Adyan Zaman, Anvi Kudaraya, Carlos Lazcano, Yuankai Zhu +2 more
benchmark similarity 0.61
Abstract

Multi-arm robotic harvesting offers a promising path to improve harvesting efficiency and reduce reliance on manual labor. However, practical deployment remains challenging because the system must generalize across diverse environments while efficiently coordinating multiple arms in a shared workspace. Existing methods often require substantial data collection in target environments or rely on simplifying assumptions that limit planning quality. In this work, we introduce the first comprehensive benchmark for evaluating pretrained Vision-Language Models (VLMs) on zero-shot multi-arm fruit harvesting planning. Our benchmark uses real-world apple and citrus orchard images and compares a VLM-based planning pipeline with a traditional perception-and-planning pipeline. The VLM pipeline directly generates harvesting sequences and waypoints for each arm, while a lightweight trajectory verifier checks for collisions. Our results show that frontier VLMs can generate effective multi-arm harvesting plans zero-shot, but a practical deployment remains limited by accurate 3D waypoint generation and collision-aware coordination. These results highlight both the promise and current limitations of pretrained VLMs for multi-arm robotic harvesting.

0.28

CLASP: A Cluster-Level Autonomous Selective Picking Robot with a Soft Rolling-Band Gripper for Fresh-Market Blueberry Harvesting

cs.RO ·2026-09-16 ·Yixuan Xia, Yilin Cai, Natalia Belen Espinoza, Changying Li, Zilfina Rubio Ames +2 more
similarity 0.61
Abstract

Fresh-market blueberries require selective, gentle picking, which is labor-intensive and expensive. Over-the-row machine harvesters are fast but non-selective, bruising mixed-ripeness fruit and limiting yield to the processing market. Selective robotic harvesters typically target individual fruits rather than fruit clusters, which limits harvesting efficiency for small, densely clustered blueberries. This paper presents CLASP, a Cluster-Level Autonomous Selective Picking robot with a Soft Active Rolling-Band Gripper (SARB-Gripper). Two compliant bands envelop the cluster and roll against the fruit, drawing mature berries off in sequence, while closed-loop regulation of the pulling force keeps the applied load below the immature detachment threshold. A global-to-local perception pipeline pairs an eye-to-hand camera for global cluster detection and target selection with an eye-in-hand camera for local localization and cluster orientation estimation. Field measurements confirm a clear detachment-force separation between mature and immature fruit, and the SARB-Gripper reproduces a commanded pulling force to within \SI{3.7}{\percent}, enabling selective harvesting at the cluster level. In end-to-end field trials, CLASP autonomously grasped 23 of 25 presented clusters (\SI{92}{\percent}). With the component cost of approximately \$3326 per unit, CLASP offers a scalable approach to selective cluster-level harvesting for fresh-market blueberries.

0.19

AGRICAM: A Track-Mounted Crop Pollination Monitoring Robot

cs.CV cs.AIcs.ROeess.SY+1 ·2026-08-29 ·Malika Nisal Ratnayake, Adel N. Toosi, James Cook, Romina Rader, Alan Dorin
similarity 0.61
Abstract · 20 pages, 8 figures

Insect pollination is critical for global food production, yet monitoring pollinators at commercial farm scale remains a challenge. Recent advances in computer vision and deep learning have enabled detailed analysis of pollinator behaviour, but monitoring must trade-off detail against spatial coverage and human or technological resources. This paper presents the Automated Guided Robot for Insect and Crop Activity Monitoring (AGRICAM), a purpose-built robotic system designed to meet the requirements of large-scale pollination monitoring in protected cropping systems. AGRICAM operates autonomously on low-cost, easily installed track for movement along crop rows, without disrupting farm operations or insect behaviour. The platform integrates two RGB cameras, microclimate sensors, GPS and RFID modules, motion sensors, and 4G cellular network connectivity for data transmission. A web interface enables remote device configuration and scheduling. The system autonomously captures video and image data of insects' locations and local environmental conditions. These are transferred to the cloud and analysed using computer vision models to quantify pollinator visitation and spatio-temporal activity variation. We deployed the system on a commercial blueberry farm to demonstrate and test its capability. It successfully mapped insect pollination patterns across 80 m long industrial polytunnels over 30 hours. This data enabled spatial analyses of insect activity we used to confirm a uniform pollinator distribution within polytunnels, as desired by the farm management team. The data also highlighted variation of insect activity associated with time of day and microclimate. AGRICAM therefore has been shown to be a scalable, automated crop pollination monitor that can support data-driven decisions to enhance pollination management, thereby improving crop productivity and food security.

0.61