CS Paper Radar

CLASP: A Cluster-Level Autonomous Selective Picking Robot with a Soft Rolling-Band Gripper for Fresh-Market Blueberry Harvesting

Yixuan Xia, Yilin Cai, Natalia Belen Espinoza, Changying Li, Zilfina Rubio Ames, Xin Zhang, Yue Chen

cs.RO ·submitted 2026-09-16 02:54 UTC · v1

Abstract

Fresh-market blueberries require selective, gentle picking, which is labor-intensive and expensive. Over-the-row machine harvesters are fast but non-selective, bruising mixed-ripeness fruit and limiting yield to the processing market. Selective robotic harvesters typically target individual fruits rather than fruit clusters, which limits harvesting efficiency for small, densely clustered blueberries. This paper presents CLASP, a Cluster-Level Autonomous Selective Picking robot with a Soft Active Rolling-Band Gripper (SARB-Gripper). Two compliant bands envelop the cluster and roll against the fruit, drawing mature berries off in sequence, while closed-loop regulation of the pulling force keeps the applied load below the immature detachment threshold. A global-to-local perception pipeline pairs an eye-to-hand camera for global cluster detection and target selection with an eye-in-hand camera for local localization and cluster orientation estimation. Field measurements confirm a clear detachment-force separation between mature and immature fruit, and the SARB-Gripper reproduces a commanded pulling force to within \SI{3.7}{\percent}, enabling selective harvesting at the cluster level. In end-to-end field trials, CLASP autonomously grasped 23 of 25 presented clusters (\SI{92}{\percent}). With the component cost of approximately \$3326 per unit, CLASP offers a scalable approach to selective cluster-level harvesting for fresh-market blueberries.

Closest papers

Nearest neighbours by meaning across the whole index.

Force Sensor-Based Picking Pattern Analysis and Two-Jaw Gripper Design for Cherry Tomato Robotic Harvesting in Greenhouse

cs.RO ·2026-10-13 ·Rajmeet Singh, Manveen Kaur, Yusuf Adamu, Irfan Hussain
similarity 0.69
Abstract · 25 pages, 13 figures and 7 tables

Robotic harvesting of cherry tomatoes in greenhouses remains challenging due to dense fruit clusters, delicate skin, and the need for gentle yet effective detachment. This study presents a force-data-driven framework for autonomous cherry tomato harvesting that integrates six-axis force/torque sensing, a bio-inspired compliant gripper, and deployment on a mobile robotic platform. A wearable ATI six-axis force/torque sensor mounted on the index finger captured kinetic signatures of three elemental picking patterns (gripping, twisting, and lateral pulling) across 150 manual trials (50 per pattern) in laboratory and greenhouse settings. Gripping required a peak normal force of 3.92 and 0.45 N, twisting produced a dominant torque of 19.20 2.10 Nmm about the pedicel axis with minimal truss disturbance, and pure lateral pulling alone was insufficient for reliable detachment. These measurements informed a novel fingertip-localised Finray gripper, with compliant TPU 95A Finray geometry restricted to the fruit-contact region and a rigid PLA body, emulating the dual-stiffness human fingertip. A Dynamixel XM430-W350 servomotor under current-based torque control applies the measured gripping force and a 45° wrist twist. Finite element analysis showed a maximum von Mises stress of 0.24 MPa under the 3.92 N load, below the bruising threshold of cherry tomato skin. Integrated on a UR5 arm and Clearpath Husky A200 base, the system was validated in NVIDIA Isaac Sim and in 50 autonomous trials at the SILAL commercial greenhouse, Abu Dhabi, UAE. The hybrid grip-twist-pull strategy achieved an 86.0% picking success rate, 2.3% fruit damage, and an 8.4 s cycle time per fruit, outperforming vacuum (66.3%), rotating (70.1%), clamping (76.0%), and suction-cutting (52.4%) end-effectors. These results demonstrate preliminary feasibility under the tested facility and cultivar conditions

0.20

HarvestPoint-ACT: Explicit Target Selection and Harvest-Point Conditioning for Robotic Fruit Harvesting under Occlusion

cs.RO ·2026-08-19 ·Hanying Hu, Weipeng Li, Yikun Huang, Hao Chen, Zhengtao Hu +2 more
similarity 0.67
Abstract · Submit to IEEE ROBIO 2026

End-to-end imitation learning avoids hand-made robot motion for approaching and grasping, but the policy must still decide which fruit to pick and where to close the gripper. Occlusion can make the policy lose the selected fruit during harvesting, and the correct closing point is difficult to infer from pixels alone. This paper presents HarvestPoint-ACT, which makes both decisions explicit in perception and provides them to the policy. An instance segmentation front end with a keypoint branch predicts a mask and a harvest point for each visible fruit, where the harvest point specifies the location to close the gripper. A scheduler ranks detected candidates by occlusion and travel distance and selects one target. After each attempt, it redetects and reranks the candidates because the canopy may have changed. The selected fruit is encoded for an action chunking transformer as an eight-dimensional state, containing the absolute harvest point, the vector from the gripper to that point, a validity flag, and a confidence score. When the selected fruit is temporarily undetected, the system retains the last harvest point estimate in the robot base frame and marks it as stale, and aborts the attempt if the loss persists. On a canopy mock-up, HarvestPoint-ACT achieves a success rate of 88%, and of 75% under heavy occlusion.

0.30

Towards a Unified Taxonomy of Agricultural Harvesting Technologies: Linking Physical Interaction, Automation, and Selectivity

cs.RO ·2026-10-09 ·Renato Cristiano Torres, Fabiano Mariath D Oliveira, Claudio Gottschalg Duque
similarity 0.64
Abstract · 14 pages, 1 figure, 6 tables

Harvesting technologies have evolved from conventional mechanized systems based on bulk mechanical interaction toward increasingly automated and robotic systems capable of perception, decision-making, and localized actuation. This evolution has also created a classification problem, as harvesting systems are commonly described according to crop type, mechanical removal principle, sensing technology, robotic architecture, or degree of automation, making direct comparison difficult. This paper proposes a unified taxonomy for agricultural harvesting technologies based on two primary classification axes: the physical principle governing plant-machine interaction and the level of automation incorporated into the harvesting process. Selectivity is treated as an emergent functional attribute that expresses the biological and spatial scale at which perception and decision-making influence physical actuation. Conventional mechanized methods, including cutting, pulling, vibration, impact, brushing, pneumatic action, and combined systems, are analyzed together with semi-automated and robotic harvesting approaches. The analysis shows that increasing automation does not necessarily result in greater selectivity. A qualitative transition occurs when perception and decision-making directly influence product-level actuation, shifting harvesting from distributed or bulk interaction toward localized and selective manipulation. The proposed framework provides a common conceptual basis for positioning and comparing mechanized, automated, and robotic harvesting technologies. By separating the physical mechanism of product removal from the automation level and resulting selectivity, the taxonomy clarifies technological boundaries, identifies intermediate configurations, and supports the analysis and development of future harvesting systems.

0.24

Active perception for robotic harvesting: 3D reconstruction and localisation of tomatoes hidden within clusters in a Mediterranean greenhouse

cs.RO ·2026-09-16 ·Fernando Cañadas-Aránega, Rowan Border, José C. Moreno, José L. Blanco-Claraco
similarity 0.63
Abstract

Automating robotic harvesting in intensive agriculture within Mediterranean greenhouses requires overcoming significant challenges related to the geometric complexity of plants and occluded fruits. Although existing literature offers solutions targeting crops that grow in isolation (e.g., apples, sweet peppers, or peaches), the fundamental challenge lies in cluster-growing vegetables, where fixed sensors mounted on robotic systems fail to detect fruits hidden behind the visible surface. To address this limitation, this study presents a comprehensive pipeline for the 3D reconstruction and precise localization of each fruit within a cluster, including heavily occluded instances. The proposed methodology is structured into five sequential stages: i) point cloud acquisition using the AgriSEE Next Best View (NBV) active planner; ii) stochastic noise filtering via Statistical Outlier Removal (SOR); iii) surface classification and segmentation using Region Growing (RG); iv) isolation and recovery of occluded fruits through Density-Based Spatial Clustering of Applications with Noise (DBSCAN); and v) 3D pose estimation (position and orientation). This approach extracts the complete cluster geometry, ensuring the reliable identification of partially hidden tomatoes. Evaluated across multiple scenarios with varying occlusion levels within a simulation framework rigorously validated against real-world conditions, the system achieves a precision exceeding 90\%, an average recall of 82.8\%, and a mean Intersection over Union (mIoU) of 80.7\%. Furthermore, it demonstrates high repeatability in centroid estimation with a Root Mean Square Error (RMSE) of merely 4.2~mm, verifying its technical feasibility and high accuracy for autonomous harvesting operations.

0.15

An Ordering Optimization for Fruit-Vegetable in High-Density Environment based on Genetic Algorithm

cs.RO eess.SY ·2026-11-05 ·Jaehwi Seol, Jeonghyeon Pak, Hyoung Il Son
similarity 0.61
Abstract · 39 pages, 11 figures

This paper presents a robotic harvesting method that combines RGB-D fruit localization, GA-based harvest ordering, and waypoint-based robot motion in dense and unstructured crop environments. The global RGB-D camera provides 3D fruit positions for ordering, while the end-effector-mounted camera provides close-range observation during execution. The GA determines the harvesting sequence, and static or dynamic waypoints define the intermediate robot motion. The method was evaluated in a controlled laboratory testbed and in four-, five-, and six-fruit field conditions. GA solutions were compared with exhaustive enumeration, and both waypoint offsets were examined by parameter sensitivity analysis. Continuous execution reduced unnecessary Home-return motion, while the dynamic waypoint changed with the remaining fruit distribution without changing the GA sequence. In the field evaluation, the dynamic-waypoint continuous strategy produced 40 collision events and a 70.7% target-approach success rate, compared with 55 collision events and 65.3% for the static-waypoint continuous strategy.

0.28

Pedicel-Targeted Strawberry Harvesting via Imitation Learning on a Low-Cost Teleoperated Robotic Arm

cs.RO ·2026-10-16 ·Nitin Rai, Won Suk Lee, Hongyoung Leon, Heping Zhu
publishedcode/data similarity 0.61
Abstract · 4 pages, 3 figures. This paper was peer-reviewed and accepted in the IEEE/RSJ International Conference on Intelligent Robots and Systems (IR…

Precise pedicel-targeted grasping in strawberry harvesting remains a critical bottleneck due to the pedicel's small diameter (1.3-3 mm), color similarity with surrounding foliage, and precise force control required for clean abscission zone detachment. As a market-grade crop, strawberry aesthetic value makes bruise-free pedicel detachment essential over direct fruit grasping. Classical approaches struggle to unify vision models, motion planning, and contact manipulation into a robust framework, particularly in occluded canopy environments. Therefore, this work presents a visuomotor imitation learning pipeline for pedicel-targeted strawberry harvesting that unifies perception, motion planning, and contact manipulation from collecting human teleoperation demonstrations, training an Action Chunking with Transformers (ACT) policy with a ResNet-50 visual backbone, and deploying the learned policy autonomously on a Jetson AGX Orin edge platform at 15 Hz. The trained policy achieved consistent loss convergence from 2.84 to 0.091 over 100K gradient steps on 130 demonstrations. We have also established a reproducible open-source pipeline with publicly released dataset and model weights for the agricultural robotics community. Full dataset is available at, https://huggingface.co/datasets/nitindominicrai/strawberry_pedicel_grasp_teleoperation and trained policy at, https://huggingface.co/nitindominicrai/act_strawberry_pedicel. To replicate this work, all code, configurations, and deployment instructions are publicly available at, https://github.com/nitin-dominic/autonomous_strawberry_pedicel_harvesting.

0.36

Sensorless damage-safe grasping

cs.RO ·2026-08-25 ·Yusei Shuto, Danilo Vasconcellos Vargas
theory similarity 0.58
Abstract

Robotic fruit harvesting must hold produce securely without bruising it, yet compression stiffness varies several-fold with ripeness within a single species, so no fixed grip force spans the range. Rather than tune force, we bound deformation: a controller closes the gripper until the object's estimated compression strain reaches a user-specified limit $\varepsilon$, using only the encoder position and motor-effort signal on every servo gripper---no tactile or force-torque sensor. Dividing an effort-based contact force by a lower bound on object stiffness makes the stop provably conservative---true compression stays at or below $\varepsilon$---for any $\varepsilon$ above a contact-detection strain floor we identify and quantify: robust detection itself spends compression, linearly in closing speed, making speed an explicit throughput--gentleness knob. Unlike a hand-tuned force threshold, $\varepsilon$ is a certified, size-scaling, operator-interpretable damage limit, and a ready safe-action parameter for learned grasping policies. In MuJoCo simulation over a realistic fruit-stiffness range, under a sensor-noise model calibrated to the real servo, the controller holds $\ge 98\,\%$ grasp at $0\,\%$ damage across all medium-to-firm stiffnesses for the entire certified $\varepsilon$ range, which neither fixed-force baseline attains; on stiffness-graded 3D-printed TPU cubes it matches baseline grasp success at roughly half the grip force and cuts soft-object damage from $100\,\%$ to $40\,\%$.

0.43

Gripper-Aware Automatic Dense Packing of Irregular Objects

cs.RO ·2026-09-18 ·Tianhao Qin, Connor McCann, Berk Calli, Jing Xiao
publishedbenchmark similarity 0.57
Abstract · Accepted at ISRR 2026

Automatic dense packing is widely desired in warehouse operations but remains a fundamental challenge in robotic manipulation. Existing work on irregular-object packing largely targets simulation with idealized contact, treating the object as an isolated rigid body. The gripper often enters as a discrete, post-hoc feasibility check, if considered at all, and the perception and contact drift accumulated during execution are not addressed. We present a closed-loop pipeline that integrates perception, gripper-aware placement optimization, and force-guided execution on a real manipulator. The optimizer represents the object together with the gripper as a single composite body of hierarchical sphere trees. It searches over five degrees of freedom on a GPU within a CMA-ES framework, with the vertical coordinate grounded analytically against the current heightmap. During execution, a force-monitored vertical descent stops on first contact. A post-release consolidation push then closes the residual lateral clearance that gripper-aware planning leaves behind. The container is re-perceived between placements so that drift does not accumulate. We validate the system on a Franka Emika Panda robot packing a 3D-printed set of flat, curved, and concave objects, and a YCB object subset. An ablation study isolates the contribution of gripper-aware optimization, the consolidation push, and mesh-derived geometry to end-to-end success, achieved density, and computational cost. We further benchmark against the heightmap-minimization method as a baseline representative of prior irregular-object packing work.

0.31