CS Paper Radar

Force Sensor-Based Picking Pattern Analysis and Two-Jaw Gripper Design for Cherry Tomato Robotic Harvesting in Greenhouse

Rajmeet Singh, Manveen Kaur, Yusuf Adamu, Irfan Hussain

cs.RO ·submitted 2026-10-13 11:03 UTC · v1

Abstract

Robotic harvesting of cherry tomatoes in greenhouses remains challenging due to dense fruit clusters, delicate skin, and the need for gentle yet effective detachment. This study presents a force-data-driven framework for autonomous cherry tomato harvesting that integrates six-axis force/torque sensing, a bio-inspired compliant gripper, and deployment on a mobile robotic platform. A wearable ATI six-axis force/torque sensor mounted on the index finger captured kinetic signatures of three elemental picking patterns (gripping, twisting, and lateral pulling) across 150 manual trials (50 per pattern) in laboratory and greenhouse settings. Gripping required a peak normal force of 3.92 and 0.45 N, twisting produced a dominant torque of 19.20 2.10 Nmm about the pedicel axis with minimal truss disturbance, and pure lateral pulling alone was insufficient for reliable detachment. These measurements informed a novel fingertip-localised Finray gripper, with compliant TPU 95A Finray geometry restricted to the fruit-contact region and a rigid PLA body, emulating the dual-stiffness human fingertip. A Dynamixel XM430-W350 servomotor under current-based torque control applies the measured gripping force and a 45° wrist twist. Finite element analysis showed a maximum von Mises stress of 0.24 MPa under the 3.92 N load, below the bruising threshold of cherry tomato skin. Integrated on a UR5 arm and Clearpath Husky A200 base, the system was validated in NVIDIA Isaac Sim and in 50 autonomous trials at the SILAL commercial greenhouse, Abu Dhabi, UAE. The hybrid grip-twist-pull strategy achieved an 86.0% picking success rate, 2.3% fruit damage, and an 8.4 s cycle time per fruit, outperforming vacuum (66.3%), rotating (70.1%), clamping (76.0%), and suction-cutting (52.4%) end-effectors. These results demonstrate preliminary feasibility under the tested facility and cultivar conditions

Comment
25 pages, 13 figures and 7 tables

Closest papers

Nearest neighbours by meaning across the whole index.

CLASP: A Cluster-Level Autonomous Selective Picking Robot with a Soft Rolling-Band Gripper for Fresh-Market Blueberry Harvesting

cs.RO ·2026-09-16 ·Yixuan Xia, Yilin Cai, Natalia Belen Espinoza, Changying Li, Zilfina Rubio Ames +2 more
similarity 0.69
Abstract

Fresh-market blueberries require selective, gentle picking, which is labor-intensive and expensive. Over-the-row machine harvesters are fast but non-selective, bruising mixed-ripeness fruit and limiting yield to the processing market. Selective robotic harvesters typically target individual fruits rather than fruit clusters, which limits harvesting efficiency for small, densely clustered blueberries. This paper presents CLASP, a Cluster-Level Autonomous Selective Picking robot with a Soft Active Rolling-Band Gripper (SARB-Gripper). Two compliant bands envelop the cluster and roll against the fruit, drawing mature berries off in sequence, while closed-loop regulation of the pulling force keeps the applied load below the immature detachment threshold. A global-to-local perception pipeline pairs an eye-to-hand camera for global cluster detection and target selection with an eye-in-hand camera for local localization and cluster orientation estimation. Field measurements confirm a clear detachment-force separation between mature and immature fruit, and the SARB-Gripper reproduces a commanded pulling force to within \SI{3.7}{\percent}, enabling selective harvesting at the cluster level. In end-to-end field trials, CLASP autonomously grasped 23 of 25 presented clusters (\SI{92}{\percent}). With the component cost of approximately \$3326 per unit, CLASP offers a scalable approach to selective cluster-level harvesting for fresh-market blueberries.

0.19

Koala Gripper: Co-designing Robotic Grippers and Data-Capture Devices for Scaling Dexterous Manipulation Learning

cs.RO ·2026-08-20 ·Amar Hajj-Ahmad, Zubin Kremer Guha, Tim Fofonoff, Zhi Ern Teoh, Ciarán T. O'Neill +6 more
similarity 0.68
Abstract · Paper website: http://koalagripper.rai-inst.com Paper video: http://www.youtube.com/watch?v=ZoygFCWAVhg

As the demand for larger manipulation datasets grows, handheld robotic gripper data collection and the associated gripper designs become more vital. Current data collection device designs trend towards matching the morphologies of existing robotic grippers, sacrificing ergonomics and manipulation performance. In this paper, we propose a co-design framework that guides the simultaneous development of both data collection and robotic execution devices by weaving both platform constraints into the design process. Through this workflow, we present the Koala Gripper system, a data capture device and robotic gripper platform that improves dexterity and grasp capability compared to parallel jaw grippers while preserving scalability and ease-of-use. The design introduces a novel force-optimized finger/trigger linkage mechanism with directional reflected mass characteristics, a unique monolithic dual-thumb, and user-centered ergonomic design. The design's actuated robotic fingers are backdrivable, with effective mass on the order of tens of grams. We show that these grippers are capable of secure grasps over a wide range of objects, forceful tool use, and precise singulation. We further validate the platform by deploying it with an end-to-end data collection and policy execution pipeline that highlights its capabilities through learning from demonstration. More information available at http://koalagripper.rai-inst.com

0.47

Sensorless damage-safe grasping

cs.RO ·2026-08-25 ·Yusei Shuto, Danilo Vasconcellos Vargas
theory similarity 0.67
Abstract

Robotic fruit harvesting must hold produce securely without bruising it, yet compression stiffness varies several-fold with ripeness within a single species, so no fixed grip force spans the range. Rather than tune force, we bound deformation: a controller closes the gripper until the object's estimated compression strain reaches a user-specified limit $\varepsilon$, using only the encoder position and motor-effort signal on every servo gripper---no tactile or force-torque sensor. Dividing an effort-based contact force by a lower bound on object stiffness makes the stop provably conservative---true compression stays at or below $\varepsilon$---for any $\varepsilon$ above a contact-detection strain floor we identify and quantify: robust detection itself spends compression, linearly in closing speed, making speed an explicit throughput--gentleness knob. Unlike a hand-tuned force threshold, $\varepsilon$ is a certified, size-scaling, operator-interpretable damage limit, and a ready safe-action parameter for learned grasping policies. In MuJoCo simulation over a realistic fruit-stiffness range, under a sensor-noise model calibrated to the real servo, the controller holds $\ge 98\,\%$ grasp at $0\,\%$ damage across all medium-to-firm stiffnesses for the entire certified $\varepsilon$ range, which neither fixed-force baseline attains; on stiffness-graded 3D-printed TPU cubes it matches baseline grasp success at roughly half the grip force and cuts soft-object damage from $100\,\%$ to $40\,\%$.

0.43

How Firm Should a Grasp Be?

cs.RO cs.CV ·2026-10-08 ·Matthew Beveridge, Shree K. Nayar
dataset similarity 0.61
Abstract · CoRL 2026

An ideal robot grasp is firm enough to securely handle an object, yet gentle enough to avoid damaging it. Achieving this balance requires knowledge of the object's material properties, such as its mass, elasticity, and surface friction. These properties, however, are seldom precisely known a priori. In this work, we propose a visuotactile approach to estimating material properties in real time, during the process of grasping. Our method uses these estimated properties to determine the minimum grasp force required to handle the object. We contribute a new dataset of real-world objects (fruits and vegetables) with measured physical properties (shape, mass, elasticity, and friction), which we use to construct our force estimation model via simulations. We experimentally validate our approach to grasp force control using a robot with a parallel-jaw gripper. We demonstrate our system's ability to gently grasp a wide variety of objects, in each case adapting to their unique physical properties.

0.11

ARTiS: An Adaptive Robotic Gripper for Enhanced Tool Manipulation in Disassembly Applications

cs.RO ·2026-09-03 ·Roman Mykhailyshyn, Yukiyasu Domae, Kensuke Harada
top venue similarity 0.61
Abstract

Grasping and holding tools while using them presents a considerable challenge not only for robots but also for humans. Such a challenge is particularly noticeable in processes involving assembly and disassembly, where efficiency and consistency depend on performing rapidly adaptive tasks. Nonetheless, contemporary robotic grasping technologies that can securely manipulate tools during operation frequently have significant constraints. In this paper, introduce ARTiS (Adaptive Robotic Tool Gripper in Disassembly Systems), a novel gripper that combines the adaptability of soft grippers, the dexterity of anthropomorphic hands, and the robustness of rigid mechanisms with a soft palm and fingertips. This unique combination makes it possible to hold tools securely in a variety of situations through using active jamming in the palm and fin-ray adaptation in fingertips. Furthermore, high finger dexterity is achieved through the seven degrees of freedom design, which enables the fingertips to orient to any surface, both for automated solutions and collaborative tasks. A comprehensive evaluation was conducted using a range of conventional disassembly tools to assess the gripper's compliance, durability, and functional versatility. More information, hardware instructions, and videos at https://romanmykhailyshyn.github.io/artis/

0.30

Ultra-Low-Impedance Robotic Gripper for High-Bandwidth and Transparent Physical Interaction

cs.RO ·2026-08-10 ·Joon Lee, Ari Choi, Seokhwan Jeong
published similarity 0.59
Abstract · ICRA 2026 (Late Breaking Result Poster)

Conventional robotic grippers often use high-ratio transmissions to generate grasping torque and external force sensors to measure physical interaction. High-ratio transmissions increase friction, reflected inertia, and mechanical impedance, while external sensors add hardware complexity. To address these trade-offs, this study proposes a novel 9-DOF, three-fingered Differential Direct-Drive (DDD) gripper that combines DD motors with a low-ratio (1:2) differential transmission. The mechanism centralizes actuator mass at the base to minimize moving-link inertia, while the differential architecture couples two motors in parallel to amplify torque during flexion. Experiments show that the prototype delivers a nominal grasping force of approximately 18 N and a fingertip force of 4.7 N, while maintaining a low motor contribution to system inertia (0.236%) and low passive mechanical impedance, with a maximum measured value of 50.1 N/m when the motors are unpowered. The proposed hardware addresses the trade-offs among torque, physical transparency, and kinematic dexterity, providing a foundation for high-bandwidth interaction and sensorless proprioceptive force estimation.

0.19

Towards a Unified Taxonomy of Agricultural Harvesting Technologies: Linking Physical Interaction, Automation, and Selectivity

cs.RO ·2026-10-09 ·Renato Cristiano Torres, Fabiano Mariath D Oliveira, Claudio Gottschalg Duque
similarity 0.59
Abstract · 14 pages, 1 figure, 6 tables

Harvesting technologies have evolved from conventional mechanized systems based on bulk mechanical interaction toward increasingly automated and robotic systems capable of perception, decision-making, and localized actuation. This evolution has also created a classification problem, as harvesting systems are commonly described according to crop type, mechanical removal principle, sensing technology, robotic architecture, or degree of automation, making direct comparison difficult. This paper proposes a unified taxonomy for agricultural harvesting technologies based on two primary classification axes: the physical principle governing plant-machine interaction and the level of automation incorporated into the harvesting process. Selectivity is treated as an emergent functional attribute that expresses the biological and spatial scale at which perception and decision-making influence physical actuation. Conventional mechanized methods, including cutting, pulling, vibration, impact, brushing, pneumatic action, and combined systems, are analyzed together with semi-automated and robotic harvesting approaches. The analysis shows that increasing automation does not necessarily result in greater selectivity. A qualitative transition occurs when perception and decision-making directly influence product-level actuation, shifting harvesting from distributed or bulk interaction toward localized and selective manipulation. The proposed framework provides a common conceptual basis for positioning and comparing mechanized, automated, and robotic harvesting technologies. By separating the physical mechanism of product removal from the automation level and resulting selectivity, the taxonomy clarifies technological boundaries, identifies intermediate configurations, and supports the analysis and development of future harvesting systems.

0.24

GIFT: Glove-Inferred Force Transfer: Force-Aware Human-to-Robot Skill Transfer from a Wearable Sensing Glove to a Robot Hand Without Tactile Sensors

cs.RO ·2026-09-12 ·Tzach Sarusi
code/data similarity 0.58
Abstract · 7 pages, 5 figures, 1 table. Project page: https://tzahsarusi.github.io

Human-to-robot skill transfer from sensing gloves has so far relied on shared hardware: the same tactile glove worn by the demonstrator and the robot, or a learned alignment between two tactile sensors. We present GIFT (Glove-Inferred Force Transfer), a pipeline in which the interface between human and robot is a physical unit rather than a shared sensor: fingertip force is measured in newtons on the human side and estimated in newtons on the robot side. A wearable glove records finger flexion, calibrated fingertip force, and wrist orientation, while a head-mounted camera records the demonstration; no robot is present. At deployment, the robot estimates force from actuator-current residuals relative to a free-space baseline, through a calibrated mapping to newtons, so any position-controlled hand that reports motor current can serve as the deployment platform. The policy uses a glove-space state and predicts finger-position targets; the robot enters only through two calibrated adapters, a retargeting decoder and a force estimator. We evaluate GIFT on a cup grasp-and-hold task with two action-chunking policies trained on the same demonstrations, with fingertip-force inputs retained in one and zeroed in the other. In a 50-rollout evaluation with sample size and metrics fixed before scoring, both policies succeeded in all 25 rollouts. The median of the per-rollout hold-phase grip-force estimates was 53% lower with force inputs: 1.20 N versus 2.55 N (one-sided Mann-Whitney U, p<0.0001). In an observation ablation, a vision-only policy achieved 0/15 grasps, policies given hand-command state acquired the grasp, and the force inputs determined how hard the policy held. A force channel measured on the human hand thus transfers to a robot hand with no tactile hardware, through a retargeting map from five glove channels to seven robot actuators, with no sensor shared between the two.

0.32