CS Paper Radar

How Firm Should a Grasp Be?

Matthew Beveridge, Shree K. Nayar

cs.RO cs.CV ·submitted 2026-10-08 04:19 UTC · v1
dataset

Abstract

An ideal robot grasp is firm enough to securely handle an object, yet gentle enough to avoid damaging it. Achieving this balance requires knowledge of the object's material properties, such as its mass, elasticity, and surface friction. These properties, however, are seldom precisely known a priori. In this work, we propose a visuotactile approach to estimating material properties in real time, during the process of grasping. Our method uses these estimated properties to determine the minimum grasp force required to handle the object. We contribute a new dataset of real-world objects (fruits and vegetables) with measured physical properties (shape, mass, elasticity, and friction), which we use to construct our force estimation model via simulations. We experimentally validate our approach to grasp force control using a robot with a parallel-jaw gripper. We demonstrate our system's ability to gently grasp a wide variety of objects, in each case adapting to their unique physical properties.

Comment
CoRL 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Control Architecture for Safe Grasping of Fragile Objects Using a Coarse Position-Controlled Gripper

cs.RO ·2026-09-11 ·Marko Pavlic, Moritz Geier, Timo Markert, Darius Burschka
published similarity 0.77
Abstract · Accepted for IEEE IROS 2026 publication

Robots are increasingly used in unstructured environments. The need for them to safely grasp unknown objects without damaging them becomes crucial. Humans achieve this by sensing and quickly responding by adjusting their grasping force. Similarly, effective grasp acquisition in robots requires compliant interaction strategies that can adapt to uncertain object properties and adjust to any instabilities during manipulation. We present a geometry-aware force/torque-based contact estimation method for a coarse position-controlled gripper, combined with an adaptive admittance controller for safe grasp acquisition. The desired contact forces are estimated online to keep stable contact with objects of unknown properties. This enables compliant and stable grasps while avoiding excessive forces. Experiments with objects of different sizes, shapes, stiffnesses, and weights show that the proposed algorithm not only prevents slippage but also applies minimal force to safely grasp an object without causing excessive deformation.

0.28

Tactile Sensing-based Secure and Gentle Grasping of Unknown Objects

cs.RO ·2026-10-08 ·Feng Han
similarity 0.74
Abstract

Reliable robotic manipulation requires maintaining a firm grasp while strictly avoiding both contact slip and structural damage to the object. Satisfying these inherent \textit{secure-and-gentle} grasping constraints is challenging for unknown objects. We present a novel online data-driven predictive control framework for safe dynamic robotic grasping of unknown objects. The proposed system features a pair of compact, single-channel tactile-sensing modules that characterize the gripper-object dynamic interaction in real time, entirely bypassing the need for prior knowledge or offline training. A finite-state-machine-based grasping force probing mechanism is developed to establish the initial grasping force and explicitly identify grasping force constraints. Through online dynamics learning, a Gaussian Process (GP) model captures gripper-object interaction dynamics. The model uncertainties are further used to form robust grasping constraints, which are embedded into a model predictive control scheme. We demonstrate error convergence in a probabilistic sense. The proposed control framework runs at 100~Hz in real time to dynamically manipulate and handle objects rather than static holding. Extensive experimental evaluations across diverse contact surface topologies and various types of objects validate superior performance and efficiency compared to baseline strategies. The proposed method is able to manipulate objects ranging from delicate items, such as raw tofu and marshmallows, to rough objects, such as rocks.

0.08

Robot Learning with Visual Predicted Force

cs.RO cs.AI ·2026-10-03 ·Haonan Chen, Feiyang Wu, Yuxiang Ma, Mustafa Mete, Pengfei Ye +9 more
similarity 0.71
Abstract · 9 pages, 8 figures. Project Website: https://visual-force.github.io/

Force-aware manipulation typically relies on specialized force or tactile sensors. We show that force-aware manipulation can instead be achieved through visual force prediction from the deformation of a compliant Fin Ray gripper. Our approach trains two models. First, we train a visual force estimator on calibration data and use it to annotate task demonstrations with force estimates. Second, we train an action--force proposal policy on these force-augmented demonstrations to jointly generate candidate robot actions and their associated forces. At test time, we sample candidate actions and the forces they are expected to produce, then execute the action whose predicted force is closest to a target from the demonstrations. We evaluate our approach on berry picking, empty-can grasping, in-hand reorientation, and plug insertion. Our results show that visual force prediction can guide inference-time action selection for contact-rich manipulation without requiring force or tactile sensors at deployment.

0.25

ViTacPhys: Physical Property-Aware Grasping from Human Visual-Tactile Demonstrations

cs.RO ·2026-08-21 ·Yiwen Liu, Yujun Zhu, Kui Jia, Zhao Liao, Yangwei You +1 more
code/data similarity 0.71
Abstract · 11 pages, 7 figures. Project page: https://vitacphys.github.io/ViTacPhys/

Recent vision-based action models have demonstrated strong capabilities in complex manipulation, but they rarely leverage explicit object physical properties to adapt their policies. We introduce ViTacPhys, a visual-tactile framework and data acquisition system that estimates object mass and friction-coefficient classes, together with continuous stiffness, from human manipulation demonstrations. Trained on data from 60 rigid and deformable objects, ViTacPhys combines temporal visual-tactile modeling, cross-attention multimodal fusion, and a semantic prior derived from a vision-language model. On seen objects, it achieves 97.2% mass classification accuracy, 98.8% friction-coefficient classification accuracy, and a stiffness mean absolute percentage error (MAPE) of 5.51%. On held-out objects from known categories, it achieves 87.5% mass accuracy, 97.5% friction-coefficient accuracy, and a stiffness MAPE of 9.08%. We transfer ViTacPhys from the human domain to the robot domain using limited robot teleoperation data, robot-style video augmentation, and human demonstrations with matched actions, and deploy it as an online module for adaptive grasping. The resulting physical-property-conditioned policy achieves total grasping success rates of 95.0% on in-distribution objects and 83.4% on out-of-distribution objects. For out-of-distribution objects successfully grasped by both methods, its force profiles are more consistent with human teleoperation than those produced by ACT. These results demonstrate the feasibility of explicitly estimating and conditioning on object physical properties for real-world adaptive grasping.

0.33

GOAG: Generative and Object-Agnostic Grasp Planner for Dexterous Robotic Manipulation

cs.RO cs.AI ·2026-08-20 ·Julien Merand, Boris Meden, Mathieu Grossard, Liming Chen
top venuecode/data similarity 0.70
Abstract · Project website: https://cea-list.github.io/goagweb/

Multifingered grasping is a crucial robotic skill, but current deep-learning grasp planners often struggle to generalize to new objects because they are trained on limited, object-specific datasets. We introduce a fundamentally different approach, grounded in the observation that the gripper and the object share identical surface geometry at their mutual contact points. We propose GOAG: Generative and Object-Agnostic Grasp Planner for Dexterous Robotic Manipulation, a novel deep generative model that learns a compact latent representation of a specific gripper's contact surface distribution, enabling the efficient sampling of valid grasp configurations without relying on object-specific training data. We show that by introducing object features only at inference time, our model can effectively retrieve admissible contact areas that are compatible with the gripper's capabilities. We validate our approach through extensive experiments on established grasp protocols in both simulated and real-world scenarios, demonstrating its effectiveness with different grippers from the literature. Our method delivers state-of-the-art results on the objects from the MultiDex dataset, achieving an average success rate of 86.93%. It offers significantly faster processing when generating numerous grasps, while matching the performance of leading approaches specifically trained on this dataset. Unlike these methods, our approach does not rely on object-specific training data, highlighting the advantages of object-agnostic learning. It effectively addresses the generalization challenges faced by traditional data-driven grasp planners. Code and videos are available on our project website https://cea-list.github.io/goagweb/ .

0.68

Temporal Visuo-Tactile Learning for Dexterous Grasp Stability

cs.RO cs.CVcs.LG ·2026-10-07 ·Ken Nakahara, Aleksei Buvailik, Prokhor Kotov, Roberto Calandra
code/data similarity 0.69
Abstract · 12 Pages. Website: https://lasr-lab.github.io/dexterous-grasp-stability/

Humans can grasp everyday objects with almost perfect success rates using fingertip tactile feedback, yet much of the robotic grasping literature emphasizes vision-based grasp selection with parallel grippers. In this work, we systematically investigate how high-resolution, dynamic tactile sensing contributes to grasp stability prediction and model-guided grasping in dexterous robotic hands. To this end, we collected a dataset of 10,000 grasp trials across 200 objects using a multi-fingered robotic hand equipped with four Digit 360 tactile sensors, recording external vision, proprioception, and tactile streams throughout each grasp. With this dataset, we trained end-to-end temporal multimodal models to predict post-lift stability from pre-lift grasp observations and compared sensing modalities and encoding backbones. Experimental results and controlled input ablations show that incorporating touch, and particularly high-resolution, dynamic touch, improves grasp stability prediction. Finally, we deployed the learned predictor as an online stability gate on the real robot, where visuo-tactile model-guided regrasping improved the success rate among executed lifts by 10.5 percentage points over a non-tactile gate. These results show how rich fingertip sensing and expressive temporal models that capture the dynamics of touch can support learned grasping with multi-fingered hands without explicit contact or force modeling, providing a scalable data-driven path from tactile experience toward stable dexterous manipulation. The dataset is publicly available at https://lasr-lab.github.io/dexterous-grasp-stability/.

0.26

ZeroTouch: Tactile-Supervised Visual Contact Estimation for Contact-Rich Manipulation

cs.RO ·2026-09-18 ·Dmitriy Kosenkov, Daniia Zinniatullina, Miguel Altamirano Cabrera, Iana Zhura, Mikhail Derevianchenko +1 more
similarity 0.69
Abstract

Reliable robotic grasping benefits from estimating the evolving physical interaction and selecting a grasp-dependent compression target. Tactile sensors provide direct interaction measurements but require dedicated hardware at deployment. We introduce ZeroTouch, a tactile-supervised framework that predicts dense contact deformation, the instantaneous six-axis wrench, and a grasp-dependent desired compression target from wrist RGB observations, gripper state, and local gravity direction. Tactile measurements are used only as privileged supervision during training and are not required at deployment. On the full validation set, the complete architecture reduces normal-force MAE from 2.017 N for a state-only baseline to 0.531 N. In physical evaluation with 20 trials per condition, ZeroTouch achieves 95% success on an unseen object, 80% in a seen-object/unseen-grasp condition, and 90% under a content/load shift. Under the same evaluation protocol, OpenVLA achieves 25%, 40%, and 55%, while SmolVLA achieves 10%, 25%, and 35%, respectively.

0.20

Sensorless damage-safe grasping

cs.RO ·2026-08-25 ·Yusei Shuto, Danilo Vasconcellos Vargas
theory similarity 0.69
Abstract

Robotic fruit harvesting must hold produce securely without bruising it, yet compression stiffness varies several-fold with ripeness within a single species, so no fixed grip force spans the range. Rather than tune force, we bound deformation: a controller closes the gripper until the object's estimated compression strain reaches a user-specified limit $\varepsilon$, using only the encoder position and motor-effort signal on every servo gripper---no tactile or force-torque sensor. Dividing an effort-based contact force by a lower bound on object stiffness makes the stop provably conservative---true compression stays at or below $\varepsilon$---for any $\varepsilon$ above a contact-detection strain floor we identify and quantify: robust detection itself spends compression, linearly in closing speed, making speed an explicit throughput--gentleness knob. Unlike a hand-tuned force threshold, $\varepsilon$ is a certified, size-scaling, operator-interpretable damage limit, and a ready safe-action parameter for learned grasping policies. In MuJoCo simulation over a realistic fruit-stiffness range, under a sensor-noise model calibrated to the real servo, the controller holds $\ge 98\,\%$ grasp at $0\,\%$ damage across all medium-to-firm stiffnesses for the entire certified $\varepsilon$ range, which neither fixed-force baseline attains; on stiffness-graded 3D-printed TPU cubes it matches baseline grasp success at roughly half the grip force and cuts soft-object damage from $100\,\%$ to $40\,\%$.

0.43