CS Paper Radar

Sensorless damage-safe grasping

Yusei Shuto, Danilo Vasconcellos Vargas

cs.RO ·submitted 2026-08-25 02:24 UTC · v1
theory

Abstract

Robotic fruit harvesting must hold produce securely without bruising it, yet compression stiffness varies several-fold with ripeness within a single species, so no fixed grip force spans the range. Rather than tune force, we bound deformation: a controller closes the gripper until the object's estimated compression strain reaches a user-specified limit $\varepsilon$, using only the encoder position and motor-effort signal on every servo gripper---no tactile or force-torque sensor. Dividing an effort-based contact force by a lower bound on object stiffness makes the stop provably conservative---true compression stays at or below $\varepsilon$---for any $\varepsilon$ above a contact-detection strain floor we identify and quantify: robust detection itself spends compression, linearly in closing speed, making speed an explicit throughput--gentleness knob. Unlike a hand-tuned force threshold, $\varepsilon$ is a certified, size-scaling, operator-interpretable damage limit, and a ready safe-action parameter for learned grasping policies. In MuJoCo simulation over a realistic fruit-stiffness range, under a sensor-noise model calibrated to the real servo, the controller holds $\ge 98\,\%$ grasp at $0\,\%$ damage across all medium-to-firm stiffnesses for the entire certified $\varepsilon$ range, which neither fixed-force baseline attains; on stiffness-graded 3D-printed TPU cubes it matches baseline grasp success at roughly half the grip force and cuts soft-object damage from $100\,\%$ to $40\,\%$.

Closest papers

Nearest neighbours by meaning across the whole index.

How Firm Should a Grasp Be?

cs.RO cs.CV ·2026-10-08 ·Matthew Beveridge, Shree K. Nayar
dataset similarity 0.69
Abstract · CoRL 2026

An ideal robot grasp is firm enough to securely handle an object, yet gentle enough to avoid damaging it. Achieving this balance requires knowledge of the object's material properties, such as its mass, elasticity, and surface friction. These properties, however, are seldom precisely known a priori. In this work, we propose a visuotactile approach to estimating material properties in real time, during the process of grasping. Our method uses these estimated properties to determine the minimum grasp force required to handle the object. We contribute a new dataset of real-world objects (fruits and vegetables) with measured physical properties (shape, mass, elasticity, and friction), which we use to construct our force estimation model via simulations. We experimentally validate our approach to grasp force control using a robot with a parallel-jaw gripper. We demonstrate our system's ability to gently grasp a wide variety of objects, in each case adapting to their unique physical properties.

0.11

Force Sensor-Based Picking Pattern Analysis and Two-Jaw Gripper Design for Cherry Tomato Robotic Harvesting in Greenhouse

cs.RO ·2026-10-13 ·Rajmeet Singh, Manveen Kaur, Yusuf Adamu, Irfan Hussain
similarity 0.67
Abstract · 25 pages, 13 figures and 7 tables

Robotic harvesting of cherry tomatoes in greenhouses remains challenging due to dense fruit clusters, delicate skin, and the need for gentle yet effective detachment. This study presents a force-data-driven framework for autonomous cherry tomato harvesting that integrates six-axis force/torque sensing, a bio-inspired compliant gripper, and deployment on a mobile robotic platform. A wearable ATI six-axis force/torque sensor mounted on the index finger captured kinetic signatures of three elemental picking patterns (gripping, twisting, and lateral pulling) across 150 manual trials (50 per pattern) in laboratory and greenhouse settings. Gripping required a peak normal force of 3.92 and 0.45 N, twisting produced a dominant torque of 19.20 2.10 Nmm about the pedicel axis with minimal truss disturbance, and pure lateral pulling alone was insufficient for reliable detachment. These measurements informed a novel fingertip-localised Finray gripper, with compliant TPU 95A Finray geometry restricted to the fruit-contact region and a rigid PLA body, emulating the dual-stiffness human fingertip. A Dynamixel XM430-W350 servomotor under current-based torque control applies the measured gripping force and a 45° wrist twist. Finite element analysis showed a maximum von Mises stress of 0.24 MPa under the 3.92 N load, below the bruising threshold of cherry tomato skin. Integrated on a UR5 arm and Clearpath Husky A200 base, the system was validated in NVIDIA Isaac Sim and in 50 autonomous trials at the SILAL commercial greenhouse, Abu Dhabi, UAE. The hybrid grip-twist-pull strategy achieved an 86.0% picking success rate, 2.3% fruit damage, and an 8.4 s cycle time per fruit, outperforming vacuum (66.3%), rotating (70.1%), clamping (76.0%), and suction-cutting (52.4%) end-effectors. These results demonstrate preliminary feasibility under the tested facility and cultivar conditions

0.20

Control Architecture for Safe Grasping of Fragile Objects Using a Coarse Position-Controlled Gripper

cs.RO ·2026-09-11 ·Marko Pavlic, Moritz Geier, Timo Markert, Darius Burschka
published similarity 0.66
Abstract · Accepted for IEEE IROS 2026 publication

Robots are increasingly used in unstructured environments. The need for them to safely grasp unknown objects without damaging them becomes crucial. Humans achieve this by sensing and quickly responding by adjusting their grasping force. Similarly, effective grasp acquisition in robots requires compliant interaction strategies that can adapt to uncertain object properties and adjust to any instabilities during manipulation. We present a geometry-aware force/torque-based contact estimation method for a coarse position-controlled gripper, combined with an adaptive admittance controller for safe grasp acquisition. The desired contact forces are estimated online to keep stable contact with objects of unknown properties. This enables compliant and stable grasps while avoiding excessive forces. Experiments with objects of different sizes, shapes, stiffnesses, and weights show that the proposed algorithm not only prevents slippage but also applies minimal force to safely grasp an object without causing excessive deformation.

0.28

ZeroTouch: Tactile-Supervised Visual Contact Estimation for Contact-Rich Manipulation

cs.RO ·2026-09-18 ·Dmitriy Kosenkov, Daniia Zinniatullina, Miguel Altamirano Cabrera, Iana Zhura, Mikhail Derevianchenko +1 more
similarity 0.64
Abstract

Reliable robotic grasping benefits from estimating the evolving physical interaction and selecting a grasp-dependent compression target. Tactile sensors provide direct interaction measurements but require dedicated hardware at deployment. We introduce ZeroTouch, a tactile-supervised framework that predicts dense contact deformation, the instantaneous six-axis wrench, and a grasp-dependent desired compression target from wrist RGB observations, gripper state, and local gravity direction. Tactile measurements are used only as privileged supervision during training and are not required at deployment. On the full validation set, the complete architecture reduces normal-force MAE from 2.017 N for a state-only baseline to 0.531 N. In physical evaluation with 20 trials per condition, ZeroTouch achieves 95% success on an unseen object, 80% in a seen-object/unseen-grasp condition, and 90% under a content/load shift. Under the same evaluation protocol, OpenVLA achieves 25%, 40%, and 55%, while SmolVLA achieves 10%, 25%, and 35%, respectively.

0.20

Tactile Sensing-based Secure and Gentle Grasping of Unknown Objects

cs.RO ·2026-10-08 ·Feng Han
similarity 0.64
Abstract

Reliable robotic manipulation requires maintaining a firm grasp while strictly avoiding both contact slip and structural damage to the object. Satisfying these inherent \textit{secure-and-gentle} grasping constraints is challenging for unknown objects. We present a novel online data-driven predictive control framework for safe dynamic robotic grasping of unknown objects. The proposed system features a pair of compact, single-channel tactile-sensing modules that characterize the gripper-object dynamic interaction in real time, entirely bypassing the need for prior knowledge or offline training. A finite-state-machine-based grasping force probing mechanism is developed to establish the initial grasping force and explicitly identify grasping force constraints. Through online dynamics learning, a Gaussian Process (GP) model captures gripper-object interaction dynamics. The model uncertainties are further used to form robust grasping constraints, which are embedded into a model predictive control scheme. We demonstrate error convergence in a probabilistic sense. The proposed control framework runs at 100~Hz in real time to dynamically manipulate and handle objects rather than static holding. Extensive experimental evaluations across diverse contact surface topologies and various types of objects validate superior performance and efficiency compared to baseline strategies. The proposed method is able to manipulate objects ranging from delicate items, such as raw tofu and marshmallows, to rough objects, such as rocks.

0.08

How Well Do Pseudo-Rigid Body Models Capture Real Plants? In-Field Validation of Simulated Blueberry Canes

cs.RO ·2026-09-12 ·Hannah Kolano, Chelse VanAtter, Wei Yang, Cindy Grimm, Joseph R. Davidson
similarity 0.61
Abstract

Many labor-intensive tasks in fruit production such as pruning require physically interacting with the plant (e.g., pushing, pulling, bending limbs, etc.). Due to increasing labor shortages, there is widespread interest in the adoption of robotics in this area. When the robot must physically interact with the system, a deformable model of the plant is beneficial. Coupled, spring-loaded beams have been used in prior work to build deformable plant models in simulation for learning, planning, and control, but this approach has rarely been validated against the mechanical properties of real-world plants. In this paper, we use this rigid-body model, grounded in real material properties and beam bending theory, to simulate the deformation of blueberry canes under loading. To validate the model, we simulate the canes in MuJoCo and compare their behavior with real-world data collected from probing canes at a commercial farm with a custom testbed. We perform sensitivity analysis on several key modeling variables and show that this approach is highly sensitive to the plant diameter calculations and a priori flexural modulus estimation, which is dependent on season and blueberry variety. We also share our dataset of live blueberry cane deformation, including RGB-D images and measured forces and displacements.

0.20

Mechanical Interaction Sensing for Robotic Kiwifruit Handling with an Optoelectronic Soft Suction Cup

cs.RO ·2026-11-06 ·Romina Adhami, Ebrahim Shahabi, Alessio Mondini, Samuel M. Youssef, Cosimo Della Santina +2 more
similarity 0.61
Abstract

Robotic handling of delicate fruit benefits from compliant contact and quantitative sensing of the mechanical interaction at the end-effector. This study investigates an optoelectronic soft suction cup with a kiwifruit-specific bicomponent design for estimating interaction forces during contact with real fruit. During known-contact intervals, the optical signals accurately estimate interaction force on fruits excluded from model training: the best shallow network achieves grouped out-of-fold pooled R-squared = 0.968 +/- 0.005 (MAE = 0.138 N), with a median per-fruit held-out R-squared = 0.973 (MAE = 0.134 N). A simple monotonic mapping from the mean optical response alone achieves R-squared = 0.925 +/- 0.005, showing that substantial force-related information is already present in the optical response. Leave-one-collection-day-out validation remains strong (R-squared = 0.955 +/- 0.031), supporting robustness across acquisition sessions. As an exploratory secondary analysis, binary Soft/Firm classification from compression-test reference labels achieves moderate balanced accuracy (approximately 0.705) under grouped held-out-fruit validation, while finer three-class grading shows limited performance.

0.25

What is the Better Curriculum: Controller-Shaped Grasping Behavior for Contact Force-Sensitive Manipulation

cs.RO ·2026-09-22 ·Ziyan Feng, Zizhao Yuan, Yulong Fu, Yuxin He, Zhiyuan Zhang +4 more
code/data similarity 0.59
Abstract · 22 pages, 6 figures. Project page: https://shayfeng.github.io/better-curriculum/

How should a robot learn to manipulate objects so fragile that sub-Newton contact forces can cause irreversible damage? Existing visuo-tactile policy learning typically treats tactile sensing as an additional policy input. In direct-contact force-sensitive manipulation, however, the bottleneck can arise earlier, during data collection: manual gripper control is too delayed and coarse-grained to reliably maintain the narrow force range required for stable grasping. We therefore use a deterministic 25 Hz tactile reflex controller as a collection-time teacher, producing demonstrations with controller-shaped grasping behavior for tactile-free policy learning. On Action Chunking with Transformers (ACT), policies trained from reflex-shaped demonstrations recover the teacher's grasping profile and achieve 95% stable grasps on the nominal plastic-cup task, substantially outperforming visually screened manual demonstrations. The same intervention improves in-distribution stability on $π_{0.5}$ and shows a favorable exploratory trend on an unseen paper-cup variant. Under randomized external disturbance, however, the reflex-data $π_{0.5}$ policy still fails in 45% of policy-only trials, whereas a deployment-time reflex arbiter retains all grasps. These results reveal a new role for tactile feedback in force-sensitive manipulation: rather than integrating tactile into the policy, we use it as a collection-time teacher that shapes grasping behavior in demonstrations for policy learning, while disturbance rejection remains controller-dependent, revealing the boundary of tactile-free policy.

0.36