CS Paper Radar

How Well Do Pseudo-Rigid Body Models Capture Real Plants? In-Field Validation of Simulated Blueberry Canes

Hannah Kolano, Chelse VanAtter, Wei Yang, Cindy Grimm, Joseph R. Davidson

cs.RO ·submitted 2026-09-12 00:40 UTC · v1

Abstract

Many labor-intensive tasks in fruit production such as pruning require physically interacting with the plant (e.g., pushing, pulling, bending limbs, etc.). Due to increasing labor shortages, there is widespread interest in the adoption of robotics in this area. When the robot must physically interact with the system, a deformable model of the plant is beneficial. Coupled, spring-loaded beams have been used in prior work to build deformable plant models in simulation for learning, planning, and control, but this approach has rarely been validated against the mechanical properties of real-world plants. In this paper, we use this rigid-body model, grounded in real material properties and beam bending theory, to simulate the deformation of blueberry canes under loading. To validate the model, we simulate the canes in MuJoCo and compare their behavior with real-world data collected from probing canes at a commercial farm with a custom testbed. We perform sensitivity analysis on several key modeling variables and show that this approach is highly sensitive to the plant diameter calculations and a priori flexural modulus estimation, which is dependent on season and blueberry variety. We also share our dataset of live blueberry cane deformation, including RGB-D images and measured forces and displacements.

Closest papers

Nearest neighbours by meaning across the whole index.

How Firm Should a Grasp Be?

cs.RO cs.CV ·2026-10-08 ·Matthew Beveridge, Shree K. Nayar
dataset similarity 0.61
Abstract · CoRL 2026

An ideal robot grasp is firm enough to securely handle an object, yet gentle enough to avoid damaging it. Achieving this balance requires knowledge of the object's material properties, such as its mass, elasticity, and surface friction. These properties, however, are seldom precisely known a priori. In this work, we propose a visuotactile approach to estimating material properties in real time, during the process of grasping. Our method uses these estimated properties to determine the minimum grasp force required to handle the object. We contribute a new dataset of real-world objects (fruits and vegetables) with measured physical properties (shape, mass, elasticity, and friction), which we use to construct our force estimation model via simulations. We experimentally validate our approach to grasp force control using a robot with a parallel-jaw gripper. We demonstrate our system's ability to gently grasp a wide variety of objects, in each case adapting to their unique physical properties.

0.11

Sensorless damage-safe grasping

cs.RO ·2026-08-25 ·Yusei Shuto, Danilo Vasconcellos Vargas
theory similarity 0.61
Abstract

Robotic fruit harvesting must hold produce securely without bruising it, yet compression stiffness varies several-fold with ripeness within a single species, so no fixed grip force spans the range. Rather than tune force, we bound deformation: a controller closes the gripper until the object's estimated compression strain reaches a user-specified limit $\varepsilon$, using only the encoder position and motor-effort signal on every servo gripper---no tactile or force-torque sensor. Dividing an effort-based contact force by a lower bound on object stiffness makes the stop provably conservative---true compression stays at or below $\varepsilon$---for any $\varepsilon$ above a contact-detection strain floor we identify and quantify: robust detection itself spends compression, linearly in closing speed, making speed an explicit throughput--gentleness knob. Unlike a hand-tuned force threshold, $\varepsilon$ is a certified, size-scaling, operator-interpretable damage limit, and a ready safe-action parameter for learned grasping policies. In MuJoCo simulation over a realistic fruit-stiffness range, under a sensor-noise model calibrated to the real servo, the controller holds $\ge 98\,\%$ grasp at $0\,\%$ damage across all medium-to-firm stiffnesses for the entire certified $\varepsilon$ range, which neither fixed-force baseline attains; on stiffness-graded 3D-printed TPU cubes it matches baseline grasp success at roughly half the grip force and cuts soft-object damage from $100\,\%$ to $40\,\%$.

0.43

When Obstacles Bend: Modeling Vegetation Deformation in the context of Field Robotics

cs.RO ·2026-08-26 ·Zaar Khizar, Tom Montagnon, Roland Lenain, Romuald Aufrère, Johann Laconte
hot direction similarity 0.58
Abstract · 8 pages, 7 figures, submitted to IEEE Robotics and Automation Letters (RA-L)

Autonomous robots operating in natural environments must often interact with vegetation rather than simply avoid it. In this context, traversability is typically defined from the robot's perspective, by measuring how a specific platform responds when moving through the environment. While practical, this viewpoint entangles the assessment of the environment with the robot's own dynamics, making the resulting characterization difficult to transfer across different platforms. More importantly, it does not directly reflect the properties of the vegetation itself, which are the true source of interaction and potential damage in applications such as agriculture and environmental monitoring. To address this limitation, we propose to characterize vegetation through its intrinsic mechanical properties, independently of any specific robot. By combining deformation measurements with contact force data, we estimate the underlying mechanical parameters and reconstruct the vegetation's response to interaction. This enables vegetation-aware navigation based on intrinsic environmental properties rather than platform-dependent metrics.

0.34

DexNinja: Learning Robust Dexterous Cutting Policy with a Real-to-Sim-to-Real Data Engine

cs.RO cs.CV ·2026-10-12 ·Haozhe Lou, Runyi Yang, Wanqi Zhong, Caiyun Liu, Yicheng Liu +8 more
similarity 0.58
Abstract

Cutting a piece of food looks effortless in human hands. For a robot, however, every cut is a high-contact interaction with a deformable, elasto-plastic object whose behavior changes with pose, contact mode, and cutting stage. Collecting real-world data is expensive and wasteful: each trial typically contaminates or damages the food, so obtaining scalable real world data for dexterous cutting is expensive and difficult. Simulation is an appealing alternative, but a large sim-to-real gap exists in both physics and perception. This gap is especially severe for topology-changing interactions like cutting, where small errors in contact, friction, or material and elasticity responses quickly compound. We propose \textsc{DexNinja}, a real2sim2real framework that turns a handful of real demonstrations into a dense and realistic training distribution. \textsc{DexNinja} (i) reconstructs object instances from real captures, (ii) randomizes physically meaningful parameters under category-level constraints, and (iii) produces augmented dexterous manipulation episodes using a custom differentiable simulator that couples robot dynamics, tactile contact, and deformable cutting. We evaluate \textsc{DexNinja} on a dexterous food-slicing task and show that (1) with tens of real demonstrations and hundreds of augmented simulator data, the success rate could reach more than 60\%. (2) the augmented data consistently improves success rates when only using real data with more than 20\% via sim-to-real, and (3) the resulting policies generalize to out-of-distribution objects with varying shapes and sizes.

0.37

RFW-S: Everyday Deformable Objects with Independent Simulation Verification

cs.RO cs.CV ·2026-11-17 ·Jiarui Guo, Saining Zhang, Jiaying Wan, Jiawei Weng, Junhao Chen +13 more
datasetcode/data similarity 0.57
Abstract · 34 pages, 19 figures. Project Page: https://roboflywheel-com.github.io/RoboFlywheel-Soft/

Large-scale robotic simulation requires diverse deformable objects with executable physical properties and realistic interaction behaviors. However, existing 3D asset collections primarily emphasize visual diversity, while scalable physical construction and verification remain challenging. We introduce RFW-S, a large-scale dataset of 83,365 simulation-verified assets spanning 485 everyday categories across five structural families: soft solids, cloth sheets, shells, garments, and bags. We develop an automated pipeline integrating reference-guided 3D generation, structure-aware physical modeling, and LLM-assisted parameter estimation and calibration. To ensure physical reliability, we introduce an independent simulation verification framework that evaluates object behaviors under interactions distinct from those used for parameter calibration. Extensive experiments demonstrate the effectiveness of independent verification and characterize deformable responses under different physical configurations. We further evaluate robotic grasping in terms of both task success and object integrity, and demonstrate the physical realism of our simulated objects through sim-to-real replay of fragile-object manipulation. RFW-S provides a scalable foundation for physically grounded simulation and embodied robotic learning.

0.34

Robot Learning with Vision-Language-Action Models for Agricultural Manipulation

cs.RO ·2026-10-19 ·Hamid Hafezi, Javad Mohammadpour Velni, Mohammadreza Davoodi
similarity 0.56
Abstract

Robotic manipulation in agricultural environments remains challenging due to variations in plant geometry, occlusion, and camera viewpoints. Pretrained vision-language-action (VLA) and generalist robot policies offer a promising approach to addressing these challenges by learning manipulation behaviors from multimodal observations and language instructions. However, adapting these policies to agricultural tasks requires domain-specific demonstrations, which are costly and time-consuming to collect on physical robots. In this work, we develop a simulation-to-real robot-learning framework for agricultural reaching and grasping that integrates task-specific demonstration collection and pretrained policy adaptation. A MuJoCo-based agricultural environment is developed with diverse tomato plant structures to support demonstration collection and controlled evaluation. Expert demonstrations are collected through joystick teleoperation, with a low-level controller used to execute robot actions. Two pretrained generalist robot policies, Octo and $π_{0.5}$, are adapted using simulated demonstrations, followed by further fine-tuning on a physical Franka Research 3 manipulator using real-robot demonstrations. The adapted policies are evaluated under in-distribution, viewpoint/spatial-shift, and out-of-distribution conditions in simulation, followed by physical-robot experiments. The influence of proprioceptive information on policy performance is also investigated. Results show that $π_{0.5}$ achieves higher task-performance scores than Octo and exhibits less degradation under distribution shifts. These findings demonstrate the potential of integrating pretrained generalist policies with task-specific demonstration learning for agricultural manipulation.

0.08

Manipulation with Stability Guarantees: Linear Deformable Objects with Non-negligible Physical Response Grasped at Multiple Location

cs.RO ·2026-09-22 ·Daniel Feliu-Talegon, Cosimo Della Santina
similarity 0.56
Abstract · 19 pages, 13 figures

Most research on the manipulation of deformable objects focuses on lightweight systems with negligible mechanical response, effectively restricting attention to quasi-static regimes. This assumption excludes a broad class of practically relevant objects, such as hoses, pipes, and wiring harnesses, whose dynamics cannot be ignored during manipulation. In this work, we address this limitation by introducing a closed-loop control architecture that explicitly accounts for object dynamics and recasts manipulation as a shape-regulation problem. Control is achieved by modulating forces and torques applied at multiple fixed points along the object. This approach builds on three methodological contributions: a fully dynamic model of linear deformable objects based on discrete strain parameterizations; an extension of the notion of actuation coordinates to SE(3), yielding a structured and inherently underactuated control architecture; and nonlinear feedback strategies providing explicit conditions for steady-state convergence to desired configurations. Extensive simulations on representative manipulation tasks demonstrate the performance gains enabled by the proposed modelbased formulation. We finally validate the approach experimentally through a real-time closed-loop implementation with online shape estimation, confirming its practical feasibility and effectiveness

0.33

FORM: Robot Manipulation through Direct Material Law Identification

cs.RO ·2026-09-29 ·Stepan Tretiakov, Ruihan Zhao, Cheng-Hsi Hsiao, Xingjian Li, Adam Thorpe +4 more
code/data similarity 0.56
Abstract · 9 pages, 6 figures. Project page: https://form-robots.github.io/ . Code: https://github.com/form-robots/FORM

When interacting with an unfamiliar deformable material, a robot lacks prior knowledge of its physical properties and how it will respond to applied forces and motion. Rapid online identification is therefore essential for reliable manipulation. We present FORM (From Observed Response to Material laws), which identifies material properties from a single robot interaction and reuses the recovered model to plan manipulation under new actions and geometries. We use weak-form momentum balance to convert observed material motion and contact forces into linear equations in the unknown material parameters. These equations are assembled using the same material point method discretization as the forward simulator, so identification reduces to linear least-squares solves whose solutions can be used directly for prediction without refitting or conversion. Across four material classes, FORM reduces identification time from roughly 10--25 minutes for iterative baselines to 2--5 seconds, while maintaining competitive accuracy on new motions, initial conditions, and geometries. We demonstrate our approach in simulation and on hardware across four manipulation tasks: elastic rod insertion, golf putting with an elastic club, elastoplastic shaping, and target-volume pouring. In each task, the model identified from a single interaction is reused to plan new motions or manipulate a different geometry. FORM estimates elastic properties within 3.4% and elastoplastic properties within 2%, achieves 72.4--77.8% IoU in dough shaping, and keeps mean pouring error at 3.8 mL across target volumes of 60--160 mL.

0.31