CS Paper Radar

FORM: Robot Manipulation through Direct Material Law Identification

Stepan Tretiakov, Ruihan Zhao, Cheng-Hsi Hsiao, Xingjian Li, Adam Thorpe, Hassan Iqbal, Sandeep Chinchali, Ufuk Topcu, Krishna Kumar

cs.RO ·submitted 2026-09-29 17:46 UTC · v1
code/data

Abstract

When interacting with an unfamiliar deformable material, a robot lacks prior knowledge of its physical properties and how it will respond to applied forces and motion. Rapid online identification is therefore essential for reliable manipulation. We present FORM (From Observed Response to Material laws), which identifies material properties from a single robot interaction and reuses the recovered model to plan manipulation under new actions and geometries. We use weak-form momentum balance to convert observed material motion and contact forces into linear equations in the unknown material parameters. These equations are assembled using the same material point method discretization as the forward simulator, so identification reduces to linear least-squares solves whose solutions can be used directly for prediction without refitting or conversion. Across four material classes, FORM reduces identification time from roughly 10--25 minutes for iterative baselines to 2--5 seconds, while maintaining competitive accuracy on new motions, initial conditions, and geometries. We demonstrate our approach in simulation and on hardware across four manipulation tasks: elastic rod insertion, golf putting with an elastic club, elastoplastic shaping, and target-volume pouring. In each task, the model identified from a single interaction is reused to plan new motions or manipulate a different geometry. FORM estimates elastic properties within 3.4% and elastoplastic properties within 2%, achieves 72.4--77.8% IoU in dough shaping, and keeps mean pouring error at 3.8 mL across target volumes of 60--160 mL.

Comment
9 pages, 6 figures. Project page: https://form-robots.github.io/ . Code: https://github.com/form-robots/FORM

Closest papers

Nearest neighbours by meaning across the whole index.

Physical Diffusion Policy via MPM-Guided 3D Gaussian Simulation

cs.RO ·2026-11-03 ·Can Wang, Qiyuan Qiao, Lei Liu, Ge Yuan, Xinhui Liu +1 more
similarity 0.73
Abstract · 10 pages

Learning robust manipulation policies for diverse everyday objects remains challenging because objects with different materials exhibit distinct deformation and contact dynamics. While diffusion policies provide a powerful framework for modeling multimodal manipulation behaviors, they typically lack explicit physical reasoning and may produce averaged actions when facing heterogeneous objects. We present a physics-aware diffusion policy that augments visual imitation learning with object physical understanding. Our framework recovers material properties from visual demonstrations by coupling 3D Gaussian Splatting with differentiable Material Point Method simulation, where video guidance and particle-level constraints enable accurate physical parameter estimation. The estimated physics conditions are further integrated into a material-aware Mixture-of-Experts diffusion policy, allowing adaptive behavior generation across different physical regimes. For practical deployment, we introduce a physics memory bank that provides efficient physical retrieval without requiring online simulation optimization. Experiments on a wide range of simulated and real-world objects demonstrate improved manipulation success and generalization over existing diffusion-based approaches. These results show that incorporating physical knowledge is critical for scalable robot manipulation in diverse environments.

0.13

Online Material Estimation for Conditioned Diffusion Policy in Shaping Deformable Linear Objects

cs.RO ·2026-09-11 ·Ryunosuke Yamada, Tomohiro Motoda, Yukiyasu Domae, Tokuo Tsuji
similarity 0.69
Abstract · 10 pages, 8 figures

Shape control of deformable linear objects (DLOs) is challenging for imitation learning because deformation behavior varies with material properties such as stiffness and elasticity, so a single policy must generate different action sequences for different objects even when the goal shape is identical. We propose a diffusion policy conditioned on material labels that are estimated online during manipulation. A recurrent estimation network predicts the material label of the grasped object from the time series of multi-view images and robot joint states, and the predicted label conditions the diffusion policy at every inference step. We collected 480 real-robot demonstrations covering four DLO materials and three groove-placement tasks, and compared per-material specialist policies, a task-conditioned policy without material labels, a policy conditioned on ground-truth material labels, and the proposed policy. Conditioning on ground-truth material labels improved the average success rate from 45.8% to 60.0% over the task-only policy, and the proposed policy reached 60.8% without any prior material information, matching the policy given ground-truth labels. A post-hoc analysis shows that the estimator extracts material-related information from the manipulation observations and that the diffusion policy responds to the resulting conditioning signal, while the one pronounced failure case is associated with persistent confusion between two similar materials.

0.24

On the Numerical Reliability of Differentiable Physics-Based Optimization for Robotic Material Manipulation

cs.RO cs.LG ·2026-09-28 ·Xintong Yang, Minglun Wei, Yu-Kun Lai, Ze Ji
published similarity 0.69
Abstract · Accepted as an oral presentation at the IROS 2026 workshop: Deformable Objects Manipulation: Research Foundations, Reproducibility and Real-…

Differentiable physics is increasingly used in robotic material manipulation for system identification, trajectory or skill optimization, demonstration generation, and robot or end-effector design. These applications depend on gradients propagated through long, contact-rich simulation rollouts. We study the numerical reliability of those gradients using two Material Point Method (MPM) system-identification benchmarks derived from elastoplastic and granular manipulation. The benchmarks provide controlled cases for three effects that also arise in broader differentiable physics-based optimization. GPU many-to-one sums whose order depends on thread scheduling changed long-horizon gradients and reversed the sign of one parameter gradient relative to a deterministic reference. Finite-difference checks became less reliable for longer rollouts because repeated-run loss variation grew much faster than the loss change produced by the tested parameter perturbations. Observation and loss definitions changed optimization behaviour and the solution preferred by an independent metric. These results motivate reproducible accumulation, finite-difference validation that compares perturbation-induced loss changes with repeated-run variation, and explicit reporting of objective construction when differentiable simulation is used for robotic optimization.

0.28

One-Shot Learning from Demonstration of Contact-Rich Robotic Manipulation by Identifying Physical Interactions

cs.RO ·2026-08-25 ·A. H. G. Overbeek, H. van der Kooij, M. Vlutters
similarity 0.68
Abstract

Learning from Demonstration (LfD) allows robots to learn manipulation tasks directly from humans, thereby supporting the versatile application of robots. Most LfD methods do not explicitly model the physical interactions between a robot and its environment, such as the making and breaking of contact, while these are crucial during manipulation tasks. Because the same basic physical interactions recur often, they can be a basis for robust, generalizable, and adaptive task reproduction. We propose an LfD method that explicitly uses what physical interactions take place where and when. Using that information, a hybrid position-force controller tracks demonstrated trajectories until contact-based transition conditions from the demonstrations are met. We evaluate our method in real robot experiments consisting of opening doors and locks, bolt picking and screwing, dislodging, and surface contouring. We show that explicitly modeling physical interactions benefits LfD in four ways. First, by allowing reproduction of complex, sequential, and contact-rich manipulation tasks using only a single demonstration and no prior knowledge of the task. Second, by facilitating robustness to unknown geometric variations in the environment. Third, by facilitating generalization when geometric variations are known. Fourth, by facilitating online adaptation using geometric information explored during task reproduction. We discuss how robustness, generalization, and adaptivity can be explicitly implemented, which is generally lacking in the LfD literature. Thereby, our work aims to close a gap in interpretable few-shot LfD of robotic manipulation.

0.07

DexNinja: Learning Robust Dexterous Cutting Policy with a Real-to-Sim-to-Real Data Engine

cs.RO cs.CV ·2026-10-12 ·Haozhe Lou, Runyi Yang, Wanqi Zhong, Caiyun Liu, Yicheng Liu +8 more
similarity 0.68
Abstract

Cutting a piece of food looks effortless in human hands. For a robot, however, every cut is a high-contact interaction with a deformable, elasto-plastic object whose behavior changes with pose, contact mode, and cutting stage. Collecting real-world data is expensive and wasteful: each trial typically contaminates or damages the food, so obtaining scalable real world data for dexterous cutting is expensive and difficult. Simulation is an appealing alternative, but a large sim-to-real gap exists in both physics and perception. This gap is especially severe for topology-changing interactions like cutting, where small errors in contact, friction, or material and elasticity responses quickly compound. We propose \textsc{DexNinja}, a real2sim2real framework that turns a handful of real demonstrations into a dense and realistic training distribution. \textsc{DexNinja} (i) reconstructs object instances from real captures, (ii) randomizes physically meaningful parameters under category-level constraints, and (iii) produces augmented dexterous manipulation episodes using a custom differentiable simulator that couples robot dynamics, tactile contact, and deformable cutting. We evaluate \textsc{DexNinja} on a dexterous food-slicing task and show that (1) with tens of real demonstrations and hundreds of augmented simulator data, the success rate could reach more than 60\%. (2) the augmented data consistently improves success rates when only using real data with more than 20\% via sim-to-real, and (3) the resulting policies generalize to out-of-distribution objects with varying shapes and sizes.

0.37

MoRE: Mixture-of-Experts for Multi-Physics Robotic World Models

cs.RO ·2026-11-19 ·Ziyu Zhu, Shaowei Liu, Albert J. Zhai, Henry Che, Wei-Chiu Ma +1 more
publishedcode/data similarity 0.68
Abstract · Accepted to CoRL 2026. 19 pages, 8 figures

A robotic world model should predict how objects evolve under robot actions and physical dynamics. While recent 3D world models have shown strong predictive capabilities, they still struggle with the heterogeneous dynamics arising from diverse object interactions. To address this in a unified framework, we decompose robotic interactions into distinct physical regimes and assign each to a specialized motion expert. We introduce MoRE, a 3D world model with a mixture of motion experts organized around rigid, deformable, and prehensile dynamics. This design enables a single model to capture diverse physical behaviors while preserving regime-specific priors. Trained on mixed simulation and real-world data, MoRE integrates with Model Predictive Control (MPC) to support diverse manipulation tasks. Experiments show that MoRE improves prediction accuracy across physics regimes, leading to stronger real-world MPC performance. Code, data, and project website are available at https://alwaysleepy.github.io/MoRE-WM-site/.

0.46

Contact-Rich Robotic Manipulation in Construction via Zero-Shot Learning: A Diffusion Policy-Guided Adaptive Control

cs.RO ·2026-08-22 ·Roman Ibrahimov, Salma Mozaffari, Arash Adel
benchmark similarity 0.67
Abstract

Construction robotics and automation offer promising means of improving productivity, alleviating workforce shortages, and reducing workers' exposure to physically demanding tasks. However, reliable contact-rich robotic assembly remains challenging under tight tolerances, fabrication inaccuracies, and uncertain contact dynamics. To address this challenge, we present a framework coupling diffusion policies trained on simulation-generated pose and force/torque data with an L1-inspired adaptive controller that corrects policy-predicted actions online to compensate for unmodeled contact dynamics. We benchmark the framework against baselines in timber joinery, pipe fitting, and sequential full-scale truss assembly. It achieves 100% success on single-task assemblies and 90-100% success across sequential truss assembly subtasks, with lower, more stable contact forces than the baselines. By enabling zero-shot sim-to-real transfer for force-aware contact-rich assembly, the framework reduces costly, labor-intensive real-world data collection for policy training and advances scalable, robust automation of multistage assembly, motivating extension to broader contact-rich manipulation tasks in construction.

0.23

Robot Learning with Visual Predicted Force

cs.RO cs.AI ·2026-10-03 ·Haonan Chen, Feiyang Wu, Yuxiang Ma, Mustafa Mete, Pengfei Ye +9 more
similarity 0.67
Abstract · 9 pages, 8 figures. Project Website: https://visual-force.github.io/

Force-aware manipulation typically relies on specialized force or tactile sensors. We show that force-aware manipulation can instead be achieved through visual force prediction from the deformation of a compliant Fin Ray gripper. Our approach trains two models. First, we train a visual force estimator on calibration data and use it to annotate task demonstrations with force estimates. Second, we train an action--force proposal policy on these force-augmented demonstrations to jointly generate candidate robot actions and their associated forces. At test time, we sample candidate actions and the forces they are expected to produce, then execute the action whose predicted force is closest to a target from the demonstrations. We evaluate our approach on berry picking, empty-can grasping, in-hand reorientation, and plug insertion. Our results show that visual force prediction can guide inference-time action selection for contact-rich manipulation without requiring force or tactile sensors at deployment.

0.25