CS Paper Radar

Contact-Rich Robotic Manipulation in Construction via Zero-Shot Learning: A Diffusion Policy-Guided Adaptive Control

Roman Ibrahimov, Salma Mozaffari, Arash Adel

cs.RO ·submitted 2026-08-22 20:41 UTC · v1
benchmark

Abstract

Construction robotics and automation offer promising means of improving productivity, alleviating workforce shortages, and reducing workers' exposure to physically demanding tasks. However, reliable contact-rich robotic assembly remains challenging under tight tolerances, fabrication inaccuracies, and uncertain contact dynamics. To address this challenge, we present a framework coupling diffusion policies trained on simulation-generated pose and force/torque data with an L1-inspired adaptive controller that corrects policy-predicted actions online to compensate for unmodeled contact dynamics. We benchmark the framework against baselines in timber joinery, pipe fitting, and sequential full-scale truss assembly. It achieves 100% success on single-task assemblies and 90-100% success across sequential truss assembly subtasks, with lower, more stable contact forces than the baselines. By enabling zero-shot sim-to-real transfer for force-aware contact-rich assembly, the framework reduces costly, labor-intensive real-world data collection for policy training and advances scalable, robust automation of multistage assembly, motivating extension to broader contact-rich manipulation tasks in construction.

Closest papers

Nearest neighbours by meaning across the whole index.

One-Shot Learning from Demonstration of Contact-Rich Robotic Manipulation by Identifying Physical Interactions

cs.RO ·2026-08-25 ·A. H. G. Overbeek, H. van der Kooij, M. Vlutters
similarity 0.72
Abstract

Learning from Demonstration (LfD) allows robots to learn manipulation tasks directly from humans, thereby supporting the versatile application of robots. Most LfD methods do not explicitly model the physical interactions between a robot and its environment, such as the making and breaking of contact, while these are crucial during manipulation tasks. Because the same basic physical interactions recur often, they can be a basis for robust, generalizable, and adaptive task reproduction. We propose an LfD method that explicitly uses what physical interactions take place where and when. Using that information, a hybrid position-force controller tracks demonstrated trajectories until contact-based transition conditions from the demonstrations are met. We evaluate our method in real robot experiments consisting of opening doors and locks, bolt picking and screwing, dislodging, and surface contouring. We show that explicitly modeling physical interactions benefits LfD in four ways. First, by allowing reproduction of complex, sequential, and contact-rich manipulation tasks using only a single demonstration and no prior knowledge of the task. Second, by facilitating robustness to unknown geometric variations in the environment. Third, by facilitating generalization when geometric variations are known. Fourth, by facilitating online adaptation using geometric information explored during task reproduction. We discuss how robustness, generalization, and adaptivity can be explicitly implemented, which is generally lacking in the LfD literature. Thereby, our work aims to close a gap in interpretable few-shot LfD of robotic manipulation.

0.07

Facet-0: A Robotic Foundation Model for Contact-Rich Precise Manipulation

cs.RO cs.LG ·2026-09-01 ·Haoyuan Deng, Haichao Liu, Wenkai Guo, Yuan Ling, Zaijia Yang +4 more
code/data similarity 0.72
Abstract · Project page: https://pine-lab-ntu.github.io/facet-0/

Real-world robotic assembly at sub-millimeter tolerances demands spatial precision, compliant interaction, and robustness to contact failures. We present Facet-0, a robotic foundation model that predicts and values the contact consequences of its actions. Facet-0 unifies multimodal representation learning and reinforcement learning (RL) post-training around a joint action-wrench proposal: a causal wrench history is aligned with vision-language semantics and kinematic state, and flow matching generates each action chunk together with the future wrist-wrench profile it is expected to induce. Deployment rollouts train a distributional Action-Wrench Critic to distinguish motions with similar task progress but different contact outcomes, while phase-aware rewards and contact-selective credit concentrate policy improvement on decisive interactions. To accommodate part-specific dynamics, a lightweight bounded actor reuses the frozen representation for on-robot adaptation; RL remains defined over executable Cartesian actions, while an auxiliary wrench head preserves predictive, non-commanded action-contact coupling. Trained on ManuFacet-1K, a 1,000-hour force-synchronized corpus spanning three embodiments and multiple manufacturing cells, the bounded task-adapted system reaches 82% mean success on five sub-millimeter computer-assembly tasks, compared with 15% for the strongest baseline, with 0.5 mm placement accuracy and 50 ms command latency.

0.51

Learning to Leverage Compliance: A Policy-Admittance Learning Framework for Robotic Insertion

cs.RO ·2026-09-25 ·Chongren Wang, Minghe Li, Honghua Dai, Zhicheng Lin, Shiyang Wei +1 more
similarity 0.71
Abstract

Policy learning and compliant control offer a promising route to reliable autonomous assembly under pose errors and contact uncertainty. However, combining them does not ensure coordination: the policy may continue pushing against contact while the controller yields, producing sustained loading with limited progress. To address this problem, we propose LeCo (Leverage Compliance), a policy-admittance learning framework that guides a visual policy through execution-time interaction under fixed admittance. A multirate feedback mechanism aggregates high-rate contact-interaction records into policy-transition rewards. An integrated conflict cost then characterizes sustained policy-loading/controller-unloading opposition, while a directional high-force tail cost captures continued-loading events within a transition. Together with task completion, these costs encourage the policy to leverage compliance with less unproductive loading. We evaluate LeCo on four real connector-assembly tasks, obtaining an aggregate success rate of 94%. Across tasks, mean successful-trial resultant-force and torque peaks decrease by approximately 30% and 64% relative to the comparison baseline. Reward ablation further shows that adding conflict shaping reduces median successful-trial contact-conditioned conflict density by approximately 53%. These results support learning to leverage fixed compliance by turning multirate policy-admittance interaction into complementary reward signals for effective, lower-load insertion.

0.23

Wrench-ACT: Enhancing Robot Policies for Contact Rich Behavior Using Direct Wrench Control

cs.RO ·2026-09-29 ·Johannes Hechtl, Yannik Blei, Simon Ball, Reihaneh Mirjalili, Michael Krawez +3 more
similarity 0.71
Abstract

While contact-rich manipulation requires deliberate regulation of interaction forces, recent approaches to robot manipulation learning predominantly represent actions as target positions or poses. Even methods that incorporate force sensing either use it solely as an observation or, when predicting forces as part of the output, rely on a hybrid force controller. In this paper, we propose an imitation learning policy that predicts wrenches as its sole action output for direct use by a pure force controller. Our studies suggest that force-domain imitation learning depends critically on data collection, with force-feedback teleoperation improving policy performance by capturing the operator's deliberate force regulation. Using Action Chunking with Transformers (ACT) as the base architecture, we train single-task models on bilateral wrench demonstrations and evaluate them on five contact-rich manipulation tasks. The wrench policy matches or outperforms position-based baselines across all tasks, with gains varying according to the degree of deliberate force regulation each task requires. Cross-condition ablations show that the bilateral data collection interface and the wrench action space each contribute independently to performance. To support further research, we will release over 1000 wrench-action demonstrations spanning these tasks on a companion website upon publication.

0.16

ArtManip: Category-Level Articulated In-Hand Manipulation

cs.RO ·2026-09-11 ·Yang Yang, Tengyu Liu, Puhao Li, Zeyuan Chen, Yuyang Li +4 more
similarity 0.70
Abstract

Category-level in-hand manipulation of articulated objects is a formidable yet underexplored challenge for dexterous robotic hands. This difficulty stems from two core bottlenecks: first, controlling an object's internal degrees of freedom is tightly coupled with maintaining grasp stability on a free-floating base; second, acquiring diverse object models and functional grasps at scale is highly labor-intensive, yet vital for generalization given the system's sensitivity to initial configurations. In this work, we present ArtManip, the first category-level articulated in-hand manipulation method that generalizes across object instances and diverse initial grasps. For initial configuration construction, we develop an automated pipeline that procedurally generates diverse articulated objects and synthesizes task-oriented functional grasps. For policy learning, we propose a robust two-stage training strategy that incorporates articulation physics randomization, reward curriculum, and latent representation distillation to handle complex contact and joint dynamics during deployment. Extensive experiments across four object categories demonstrate that our policy generalizes to unseen instances and varied configurations in simulation, and achieves zero-shot transfer to 12 real-world objects featuring diverse shapes and joint mechanics.

0.40

ZeroBot: Learning from Scratch in Minutes with Generative Real2Sim

cs.RO cs.CV ·2026-09-27 ·Ivan Kapelyukh, Xiaohan Zhang, Stephen James, Laura Herlant, Edward Johns
top venuecode/datahighly cited similarity 0.69
Abstract · IEEE RA-Letters 2026. Project page: https://zerobot-rl.github.io

We present ZeroBot, a real2sim framework for learning a robot manipulation task from scratch in minutes under challenging conditions: zero human demonstrations, zero policy pre-training, and zero known object models. Given only a single view of an object and a goal pose for that object, ZeroBot uses image-to-3D generative models to obtain a complete object mesh, which is used in simulation for large-scale parallel reinforcement learning. To accelerate training, we introduce an action space which leverages the generated geometry and learned value function to sample states involving robot-object contact. When evaluated on real-world tasks including grasping, pushing, articulated object interaction, and multi-stage manipulation, ZeroBot achieves an 87% success rate with an average training time of 119 seconds. These results show the value of using image-to-3D models in a real2sim framework for rapid, autonomous robot learning.

0.74

BrickCraft-Duo: Efficient Dual-Arm Skill Learning and Refinement for Compositional Long-Horizon Assembly

cs.RO ·2026-09-23 ·Jichuan Yu, Zhenyu Xiao, Ze Wang, Ruixuan Liu, Changliu Liu +1 more
similarity 0.69
Abstract

Interlocking brick assembly provides a representative testbed for evaluating real-world robotic manipulation capabilities, where diverse structural designs, complex inter-step dependencies, intricate mechanical interactions and tight insertion tolerances pose substantial challenges. We present BrickCraft-Duo, a modular framework for long-horizon dual-arm collaborative assembly of interlocking bricks through data-efficient skill learning and composition. BrickCraft-Duo learns reusable single- and dual-arm assembly skills from diverse demonstrations, with bilateral symmetry alignment facilitating skill sharing across symmetric arms and assembly--support role assignments. Guided by stability-aware assembly reasoning, BrickCraft-Duo composes heterogeneous skills to achieve autonomous long-horizon execution, and further integrates human-in-the-loop correction for targeted skill refinement. The resulting system achieves long-horizon success rates of at least 60% and step-level completion rates of at least 95% across five real-world assembly tasks involving partially supported configurations, with horizons of up to nine steps. Project website: https://jichuan-yu.github.io/BrickCraft-Duo.

0.35

CALM: Current Aligned Link Manipulation for Single Arm Oversized Object Lifting

cs.RO ·2026-09-24 ·Jun Hu, Sihan Chen, Kosta Jovanovic, David Navarro-Alarcon, Xueqian Wang +2 more
similarity 0.69
Abstract

Most robots manipulate objects solely with their end effectors, whereas humans flexibly leverage different body parts, such as the forearm and elbow, especially when handling oversized objects. Learning such whole-arm manipulation is chal-lenging due to long-horizon sparse rewards, limited contact sens-ing, and the sim-to-real gap in contact and actuator dynamics. To address these challenges, we propose Current-Aligned Link Manipulation, a framework for learning long-horizon contact-rich manipulation using motor current as joint load related feedback. Three stage-specific policies first learn repositioning, grasping, and lifting using privileged simulation information, and a stage router sequences them to generate complete task demonstrations. For sim-to-real transfer, a causal current mapper predicts physical motor current from simulated joint histories, aligning the actuator current observation between simulation and hardware. A unified student policy then learns from these demonstrations using only deployable sensor observations and is further refined with DAgger. The task policies are trained entirely in simulation, and the final student is deployed on hardware. Experiments demonstrate 76.2% (762/1000 trials) complete-task success in simulation and 73.3% success (22/30 trials) on the physical robot for sequential oversized-object lifting.

0.23