CS Paper Radar

CALM: Current Aligned Link Manipulation for Single Arm Oversized Object Lifting

Jun Hu, Sihan Chen, Kosta Jovanovic, David Navarro-Alarcon, Xueqian Wang, Jia Pan, Peng Zhou

cs.RO ·submitted 2026-09-24 04:32 UTC · v1

Abstract

Most robots manipulate objects solely with their end effectors, whereas humans flexibly leverage different body parts, such as the forearm and elbow, especially when handling oversized objects. Learning such whole-arm manipulation is chal-lenging due to long-horizon sparse rewards, limited contact sens-ing, and the sim-to-real gap in contact and actuator dynamics. To address these challenges, we propose Current-Aligned Link Manipulation, a framework for learning long-horizon contact-rich manipulation using motor current as joint load related feedback. Three stage-specific policies first learn repositioning, grasping, and lifting using privileged simulation information, and a stage router sequences them to generate complete task demonstrations. For sim-to-real transfer, a causal current mapper predicts physical motor current from simulated joint histories, aligning the actuator current observation between simulation and hardware. A unified student policy then learns from these demonstrations using only deployable sensor observations and is further refined with DAgger. The task policies are trained entirely in simulation, and the final student is deployed on hardware. Experiments demonstrate 76.2% (762/1000 trials) complete-task success in simulation and 73.3% success (22/30 trials) on the physical robot for sequential oversized-object lifting.

Closest papers

Nearest neighbours by meaning across the whole index.

Learning Reflexive Behavior for Contact-Rich Manipulation

cs.RO ·2026-10-02 ·Quan Nguyen, Yunho Kim, Joonho Lee
similarity 0.77
Abstract

During contact-rich manipulation, interactions between a robot and its environment carry information about local geometry: a surface prevents penetration, a bore guides a peg. A controller that exploits these interactions can comply with environmental constraints while preserving task intent. Robot-earning systems commonly use position, hybrid force-position, or Cartesian impedance control. Their prescribed tracking objectives, stiffness, or force-control directions may not match local constraints and may degrade performance. We learn a proprioceptive reflex policy in simulation on three simple interaction primitives: a spring, a plane, and a rail. The policy maps task-space commands to joint-position targets using state history, without direct force or geometrical measurements. Once trained, it serves as a frozen execution layer beneath higher-level controllers. We evaluate it in dual-arm box lifting, peg insertion, and surface following. In box lifting, the reflex kept the force below the threshold while the baseline failed. In rough-surface following it stayed below the 10 N reference, on par with tuned hybrid force-position control. In 0.02 mm peg insertion It reduced mean estimated contact force to less than half that of the baseline while increasing hardware success rates from at most 22 % to 36-58 %. By separating contact response from command generation, the reflex policy provides motion planners, learned policies, and teleoperators with robust contact-rich execution.

0.15

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.76
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

Dexterous Robot Manipulation from Human Demonstrations via Contact-Anchored Retargeting and Residual Policy Learning

cs.RO ·2026-09-21 ·Zihao Yang, Chengyuan Liu, Yu Zhou, Runze Lv, Tianyu Cui +4 more
code/datahighly cited similarity 0.76
Abstract · 16 pages, 6 figures, 5 tables. Technical report. Code: https://github.com/DexGEM-Lab/real2sim2real

Learning dexterous manipulation from demonstrations is bottlenecked by data: the contact forces that determine whether a grasp succeeds are absent from every scalable source of human demonstrations. This paper builds on two observations. First, what survives the change from a human hand to a robot hand is the contact structure of a demonstration - which finger regions touch which object locations, and in what order - rather than its joint motion. Second, physical consistency need not be engineered per task: a single residual reinforcement learning (RL) policy, trained once across diverse demonstrations, can repair kinematic recordings into physically consistent, contact-annotated trajectories, and the same residual formulation restores dynamic feasibility after retargeting. These observations yield a three-stage pipeline that converts human motion-capture recordings into dexterous robot policies with no real-robot training data: physics refinement with a simulated MANO hand recovers contacts and forces, contact-anchored retargeting transfers the demonstrated contact structure through an objective independent of hand morphology, and residual policy learning adapts the result to robot actuation. The pipeline reconstructs 25,454 single-hand trajectories (success 7.3% -> 59.3%) and 25 dual-hand tasks (16.0% -> 62.4%) with one shared policy per setting, transfers one human dataset to four morphologically distinct robot hands (+62.4 pp), and executes four contact-rich bimanual tasks on physical hardware with zero real-robot training data.

0.60

Beyond the End-Effector: Learning Whole-Arm Contact Manipulation from Human Demonstrations

cs.RO cs.CVcs.LG ·2026-10-13 ·Bo-Ruei Huang, Daniel Seita, Erdem Bıyık
publishedcode/data similarity 0.76
Abstract · Accepted to the 10th Conference on Robot Learning (CoRL 2026). 23 pages, 8 figures, 5 tables. Project page: https://wacl-robot.github.io

Robot manipulation has traditionally relied on end-effector-centric interactions. In contrast, humans routinely exploit whole-arm contacts to improve efficiency, robustness, and adaptability, especially when the hands are occupied or when precise grasping is unnecessary. Enabling similar capabilities in robots remains challenging: the robot must select where on its arm to make contact, generate effective non-prehensile interactions, and satisfy task-specific pose or safety constraints on the end-effector. We propose Whole-Arm Contact Learning (WACL), a hierarchical framework that describes each whole-arm contact task with three robot-agnostic representations and hands them to a quasi-static surface-contact optimizer: semantic keypoints that summarize the scene, a reference contact trajectory that specifies where and how the arm presses on the object, and safety-aware path constraints that a vision-language model generates from the task description to protect the end-effector's task. The robot's kinematic chain enters only in this optimizer, which grounds these representations onto the arm by jointly searching over which link makes contact, where on that link, and the joint configuration that realizes it. This decomposition lets WACL learn the contact trajectory from 10 bare-hand human demonstrations per task collected without teleoperation, while new end-effector constraints change only the optimizer's input rather than any trained component. Real-world experiments on a 7-DoF arm across four whole-arm tasks show that WACL sustains contact under end-effector constraints where a strong link-pose baseline fails (78% vs. 33% success) and generalizes to new constraints without retraining. Website: https://wacl-robot.github.io

0.53

ReForce: Learning Force-aware Retargeting for Dexterous Manipulation

cs.RO ·2026-08-16 ·Yuhang Wu, Lingqi Zeng, Changwei Jing, Jianglong Ye, Xiaolong Wang
similarity 0.75
Abstract

Human demonstrations offer a scalable data source for dexterous manipulation, but transferring them to robot actions remains challenging due to the embodiment gap. Today's retargeting is mostly kinematic, yet manipulation is decided by force, which governs how the hand interacts with the object and how the object moves. In this paper, we present ReForce, a Force-aware Retargeting method that turns human motion and forces into robot actions that reproduce the intended contact. ReForce predicts a residual on the kinematically retargeted action to reach the desired force, using a general force tracker trained on large-scale simulation interactions. It supports both online force-aware teleoperation and offline data translation. In simulation and on real hardware, ReForce achieves lower force-tracking error and stronger multi-finger contact engagement on contact-rich tasks such as paper-cup grasping and tongs manipulation.

0.41

I3L: Iterative Interactive Imitation Learning for Whole-Body Mobile Manipulation

cs.RO cs.AI ·2026-10-13 ·Wensi Ai, Christopher Luey, Karthik Dharmarajan, Evans Han, Yunfan Jiang +5 more
code/data similarity 0.75
Abstract · Project website: https://i-3l.github.io/

Policies trained offline from teleoperated demonstrations can degrade outside their training distribution. This gap is particularly acute in long-horizon whole-body mobile manipulation, where long horizons amplify compounding errors and coordinated arm, torso, and base motion makes exhaustive demonstration coverage impractical. We introduce I3L, an integrated hardware and learning system that combines whole-body correction with iterative policy refinement to address this last-mile reliability gap. Its low-cost, open-source JoyLo+ interface uses policy-tracking leader arms and touch-triggered takeover to enable coordinated corrections across the body parts, while iterative deployment and retraining allow operators to target failures of the updated policy. We evaluate I3L across three robot embodiments and eight simulated and real-world tasks, including four long-horizon whole-body mobile manipulation tasks. Controlled simulation experiments show that four-round HG-DAgger achieves the highest final success on both tasks. Under this protocol, I3L improves autonomous success over the base policies by an average of 68.3 percentage points and achieves at least 90% success on every task, outperforming demonstration-only training by 35.6 percentage points on average with the same number of training trajectories. Averaged across tasks, takeover duration per episode decreases by 72% over four rounds. Together, these results show that I3L helps close the last-mile gap between offline training and reliable deployment and provides practical insights into collecting and using corrections for long-horizon whole-body mobile manipulation. Videos, visualizations, and appendix are at https://i-3l.github.io/.

0.48

HiFun: a Hierarchical Framework for Efficient Functional Dexterous Manipulation Learning

cs.RO ·2026-10-14 ·Linyi Huang, Guowei Huai, Weibin Liu, Shulong Jiang, Ping Tan +3 more
code/data similarity 0.75
Abstract

While multi-fingered dexterous robot hands have the potential to provide human-level dexterity, using them for functional manipulation remains difficult because task success depends on precise contact, coordinated arm-hand motion, and reactive recovery from execution errors. Precise contact depends on complex contact dynamics that are difficult to model accurately in simulation, motivating real-world learning. However, real-world demonstrations in the full arm-hand control space are costly and noisy because each trajectory must coordinate arm motion with high-DoF multi-finger contact. Small execution deviations can further cause slipped contact or premature force application, making recovery from off-nominal contact states important for robust execution. To deal with these challenges, we propose HiFun, a hierarchical real-world RL framework for functional dexterous manipulation tasks. Our key insight is to decouple the control complexity into a functional hand skill for precise contact execution and an arm-hand coordination policy for arm control and hand-skill activation. This design enables effective real-time human intervention for reactive recovery learning and efficient data collection with Dynamic Movement Primitive (DMP) augmentation. Across six real-world tasks on two dexterous hands, HiFun achieves 98.3% average success within one hour of online training and remains robust to dynamic disturbances. The project page is available at https://hly-123.github.io/HiFun/.

0.23

Energy-Regularized Imitation Learning for Force- and Work-Aware Robotic Manipulation

cs.RO cs.CV ·2026-09-16 ·Toshiki Otani, Hiromu Taketsugu, Norimichi Ukita
published similarity 0.75
Abstract · ECCV 2026 Workshop on Force-Grounded, Cross-View Articulated Manipulation

This paper studies energy-aware manipulation as a physically grounded learning problem. We define a joint-space mechanical-work proxy from joint torque and angular displacement, and train a differentiable energy predictor that estimates this work from robot states and actions. The predictor converts a non-differentiable simulator-side physical quantity into a differentiable regularizer for fine-tuning a pretrained manipulation policy. We instantiate the framework with RVT-2 on RLBench and evaluate 12 manipulation tasks involving object contact, articulated motion, placement, pushing, and sweeping. The proposed fine-tuning reduces the average mechanical work from 208.8J to 204.4J (i.e., 2.1% reduction), while the mean task success rate also increases slightly from 86.2% to 86.9%. These results show that work-aware policy optimization can suppress physically inefficient motion without requiring an explicit differentiable dynamics model.

0.34