CS Paper Radar

Wrench-ACT: Enhancing Robot Policies for Contact Rich Behavior Using Direct Wrench Control

Johannes Hechtl, Yannik Blei, Simon Ball, Reihaneh Mirjalili, Michael Krawez, Seongjin Bien, Philipp Schmitt, Wolfram Burgard

cs.RO ·submitted 2026-09-29 13:29 UTC · v1

Abstract

While contact-rich manipulation requires deliberate regulation of interaction forces, recent approaches to robot manipulation learning predominantly represent actions as target positions or poses. Even methods that incorporate force sensing either use it solely as an observation or, when predicting forces as part of the output, rely on a hybrid force controller. In this paper, we propose an imitation learning policy that predicts wrenches as its sole action output for direct use by a pure force controller. Our studies suggest that force-domain imitation learning depends critically on data collection, with force-feedback teleoperation improving policy performance by capturing the operator's deliberate force regulation. Using Action Chunking with Transformers (ACT) as the base architecture, we train single-task models on bilateral wrench demonstrations and evaluate them on five contact-rich manipulation tasks. The wrench policy matches or outperforms position-based baselines across all tasks, with gains varying according to the degree of deliberate force regulation each task requires. Cross-condition ablations show that the bilateral data collection interface and the wrench action space each contribute independently to performance. To support further research, we will release over 1000 wrench-action demonstrations spanning these tasks on a companion website upon publication.

Closest papers

Nearest neighbours by meaning across the whole index.

Imp-ACT: Adaptive Impedance Control and Action Chunking with Transformers to Learn Contact-Rich Manipulation from Demonstrations

cs.RO ·2026-09-25 ·Luca Zanetti, Doganay Sirintuna, Idil Ozdamar, Pietro Balatti, Heng Zhang +1 more
similarity 0.81
Abstract · 9 pages, 5 figures, submitted to IEEE International Conference on Robotics & Automation 2027, for associated video see https://youtu.be/iAu_…

Contact-rich manipulation requires robots to balance accurate motion tracking with compliant interaction, yet most visual-action policies leave compliance fixed at the controller level. We present Imp-ACT, a methodologically grounded and practical approach to incorporating direction-dependent Cartesian stiffness modulation directly into demonstration collection, without manual stiffness selection or offline target reconstruction. During teleoperation, a self-tuning impedance controller adapts stiffness along the instantaneous direction of motion while maintaining compliance in orthogonal directions. The adapted stiffness is applied and recorded alongside visual observations and motion commands, capturing motion and compliance under the same dynamics. We implement this pipeline using Action Chunking with Transformer (ACT) to predict end-effector pose, gripper action, and motion-direction stiffness from visual, proprioceptive, and wrench observations. The performance of Imp-ACT is evaluated on wiping and plug insertion using both success rate and quantitative measures of contact behavior. Compared with fixed low- and high-stiffness baselines, Imp-ACT achieves comparable or higher success while maintaining low interaction forces. In wiping, it reduces contact-force vibration by approximately $29\times$ relative to the compliant baseline and $180\times$ relative to the stiff baseline. In plug insertion, it reduces forces orthogonal to the insertion direction by $43\%$ relative to the better fixed-stiffness baseline. These results highlight the benefit of maintaining sufficient stiffness along the direction needed for task execution while preserving compliance in other directions to limit contact forces and accommodate environmental constraints.

0.32

Contact-Aware Imitation Learning Through Contact Factorization

cs.RO ·2026-10-07 ·Jiho Hong, Daeun Song, Sanghyun Kim, Mingyo Seo
code/data similarity 0.80
Abstract

Generalizable contact-rich manipulation requires robots to preserve intended task behavior while adapting its physical realization to changing contact conditions. However, interaction forces can vary substantially with small changes in surface geometry, orientation, and friction, making policies trained directly on raw force measurements difficult to transfer beyond demonstrated conditions. We introduce FACE, a contact-factorized imitation learning framework that separates intended task behavior from environment-dependent contact factors. Our representation expresses interaction forces in normalized, contact-relative coordinates, while a learned contact-normal estimator and an online friction estimator infer the local contact normal and effective friction scale. Together, these estimators enable force observations to be encoded and policy outputs to be decoded into physical motion and force commands during execution. In this way, FACE adapts execution to current contact conditions while preserving the intended task behavior, without updating the policy parameters. We evaluate FACE on real-robot contact-rich manipulation under unseen variations in surface properties and geometry, demonstrating robust generalization across contact conditions through controlled comparisons with variants that adapt prior approaches to our setting. Videos and additional materials can be found on the project page: https://rcilab.khu.ac.kr/face.

0.28

Robot Learning with Visual Predicted Force

cs.RO cs.AI ·2026-10-03 ·Haonan Chen, Feiyang Wu, Yuxiang Ma, Mustafa Mete, Pengfei Ye +9 more
similarity 0.79
Abstract · 9 pages, 8 figures. Project Website: https://visual-force.github.io/

Force-aware manipulation typically relies on specialized force or tactile sensors. We show that force-aware manipulation can instead be achieved through visual force prediction from the deformation of a compliant Fin Ray gripper. Our approach trains two models. First, we train a visual force estimator on calibration data and use it to annotate task demonstrations with force estimates. Second, we train an action--force proposal policy on these force-augmented demonstrations to jointly generate candidate robot actions and their associated forces. At test time, we sample candidate actions and the forces they are expected to produce, then execute the action whose predicted force is closest to a target from the demonstrations. We evaluate our approach on berry picking, empty-can grasping, in-hand reorientation, and plug insertion. Our results show that visual force prediction can guide inference-time action selection for contact-rich manipulation without requiring force or tactile sensors at deployment.

0.25

Bi-MoDe: Bilateral Control-based Imitation Learning via Modifier-Conditioned Decoding for Modulation of Execution Speed and Contact Intensity

cs.RO ·2026-09-11 ·Takumi Kobayashi, Masato Kobayashi, Yuki Uranishi
similarity 0.79
Abstract

Bilateral control-based imitation learning captures both position and force information, making it well suited to contact-rich manipulation. However, existing approaches provide limited means for an operator to specify how a learned task should be executed at inference time, such as slowly or quickly, gently or firmly. We propose Bi-MoDe, a modifier-conditioned decoding framework that injects a constrained latent into every layer of the Transformer action decoder via adaLN-Zero, allowing behavioral directives to directly influence action-chunk generation. We evaluate the method on a real-world whiteboard wiping task with combinations of temporal and physical modifiers. Bi-MoDe improves physical directive following over the action-chunking baseline while maintaining comparable temporal control. An ablation further shows that decoder conditioning and latent-space composition interact, and that their combination is important for accurate physical directive following. Additional material is available at the https://mertcookimg.github.io/bi-mode/

0.27

Facet-0: A Robotic Foundation Model for Contact-Rich Precise Manipulation

cs.RO cs.LG ·2026-09-01 ·Haoyuan Deng, Haichao Liu, Wenkai Guo, Yuan Ling, Zaijia Yang +4 more
code/data similarity 0.79
Abstract · Project page: https://pine-lab-ntu.github.io/facet-0/

Real-world robotic assembly at sub-millimeter tolerances demands spatial precision, compliant interaction, and robustness to contact failures. We present Facet-0, a robotic foundation model that predicts and values the contact consequences of its actions. Facet-0 unifies multimodal representation learning and reinforcement learning (RL) post-training around a joint action-wrench proposal: a causal wrench history is aligned with vision-language semantics and kinematic state, and flow matching generates each action chunk together with the future wrist-wrench profile it is expected to induce. Deployment rollouts train a distributional Action-Wrench Critic to distinguish motions with similar task progress but different contact outcomes, while phase-aware rewards and contact-selective credit concentrate policy improvement on decisive interactions. To accommodate part-specific dynamics, a lightweight bounded actor reuses the frozen representation for on-robot adaptation; RL remains defined over executable Cartesian actions, while an auxiliary wrench head preserves predictive, non-commanded action-contact coupling. Trained on ManuFacet-1K, a 1,000-hour force-synchronized corpus spanning three embodiments and multiple manufacturing cells, the bounded task-adapted system reaches 82% mean success on five sub-millimeter computer-assembly tasks, compared with 15% for the strongest baseline, with 0.5 mm placement accuracy and 50 ms command latency.

0.51

FoLD: Force-Informed Learning for Dexterous Articulated Object Manipulation

cs.RO ·2026-09-27 ·Haowei Shen, Tingai Li, Yumeng Liu, Wenyuan Guang, Xuanze Yang +4 more
benchmarkcode/data similarity 0.78
Abstract · Project Page: https://gghgghgghgg.github.io/FoLD-project-page/

Transferring human demonstrations to dexterous robots remains challenging because differences in hand morphology and contact dynamics often cause retargeted motions to fail at producing the intended object behavior. We present \textbf{FoLD}, a framework for learning dexterous manipulation of articulated objects through explicit force guidance. FoLD compute compensatory force fields from human demonstrations together with the robot's current interaction state, yielding a force prior that promotes the demonstrated object motion. This force prior informs a residual policy that adapts retargeted hand motions to the contact requirements of the task. We evaluate FoLD on a public benchmark for articulated object manipulation, where it consistently outperforms state-of-the-art baselines across tasks and embodiments. We further validate FoLD on real dexterous robot platforms, demonstrating successful transfer of human manipulation skills to robot execution. Here is the link of our project page: https://gghgghgghgg.github.io/FoLD-project-page/.

0.29

RoboCode: Learning Reusable Action Primitives for Robot Manipulation

cs.RO cs.LG ·2026-10-23 ·Xianyue Peng, Devi Amarsaikhan, Iman Soltani
similarity 0.78
Abstract · 12 pages, 5 figures

Recent robot manipulation policies commonly predict continuous action chunks directly from observations, without explicitly modeling reusable structure in the action space. However, manipulation demonstrations often contain recurring short-horizon motion patterns that are shared across tasks. We introduce \textsc{RoboCode}, which learns these patterns through a shared soft-gated primitive action interface. Rather than assigning each action chunk to a single discrete code, \textsc{RoboCode} represents it as a soft composition of multiple learned primitives, providing a flexible intermediate representation of short-horizon actions. The primitive interface is learned from action chunks pooled across multiple tasks and then frozen while task-specific state encoders are trained to map current state inputs into the shared latent space. Experiments on five ManiSkill manipulation tasks address three questions. First, the learned primitive interface reconstructs action chunks with an average reconstruction MSE of 0.0187. Second, analysis of code activations reveals structured code reuse across tasks. Third, \textsc{RoboCode} achieves the highest or tied closed-loop success rate on all evaluated tasks, with an average success rate of 75.6%, compared with 68.8% for ACT and 41.6% for the larger Diffusion Policy baseline. These results suggest that soft-gated primitive codebooks provide an effective and interpretable intermediate action representation for robot manipulation.

0.19

ReForce: Learning Force-aware Retargeting for Dexterous Manipulation

cs.RO ·2026-08-16 ·Yuhang Wu, Lingqi Zeng, Changwei Jing, Jianglong Ye, Xiaolong Wang
similarity 0.78
Abstract

Human demonstrations offer a scalable data source for dexterous manipulation, but transferring them to robot actions remains challenging due to the embodiment gap. Today's retargeting is mostly kinematic, yet manipulation is decided by force, which governs how the hand interacts with the object and how the object moves. In this paper, we present ReForce, a Force-aware Retargeting method that turns human motion and forces into robot actions that reproduce the intended contact. ReForce predicts a residual on the kinematically retargeted action to reach the desired force, using a general force tracker trained on large-scale simulation interactions. It supports both online force-aware teleoperation and offline data translation. In simulation and on real hardware, ReForce achieves lower force-tracking error and stronger multi-finger contact engagement on contact-rich tasks such as paper-cup grasping and tongs manipulation.

0.41