CS Paper Radar

Facet-0: A Robotic Foundation Model for Contact-Rich Precise Manipulation

Haoyuan Deng, Haichao Liu, Wenkai Guo, Yuan Ling, Zaijia Yang, Yuanjiang Xue, Haosheng Sun, Liangzi Wang, Ziwei Wang

cs.RO cs.LG ·submitted 2026-09-01 17:58 UTC · v1
code/data

Abstract

Real-world robotic assembly at sub-millimeter tolerances demands spatial precision, compliant interaction, and robustness to contact failures. We present Facet-0, a robotic foundation model that predicts and values the contact consequences of its actions. Facet-0 unifies multimodal representation learning and reinforcement learning (RL) post-training around a joint action-wrench proposal: a causal wrench history is aligned with vision-language semantics and kinematic state, and flow matching generates each action chunk together with the future wrist-wrench profile it is expected to induce. Deployment rollouts train a distributional Action-Wrench Critic to distinguish motions with similar task progress but different contact outcomes, while phase-aware rewards and contact-selective credit concentrate policy improvement on decisive interactions. To accommodate part-specific dynamics, a lightweight bounded actor reuses the frozen representation for on-robot adaptation; RL remains defined over executable Cartesian actions, while an auxiliary wrench head preserves predictive, non-commanded action-contact coupling. Trained on ManuFacet-1K, a 1,000-hour force-synchronized corpus spanning three embodiments and multiple manufacturing cells, the bounded task-adapted system reaches 82% mean success on five sub-millimeter computer-assembly tasks, compared with 15% for the strongest baseline, with 0.5 mm placement accuracy and 50 ms command latency.

Comment
Project page: https://pine-lab-ntu.github.io/facet-0/

Closest papers

Nearest neighbours by meaning across the whole index.

Wrench-ACT: Enhancing Robot Policies for Contact Rich Behavior Using Direct Wrench Control

cs.RO ·2026-09-29 ·Johannes Hechtl, Yannik Blei, Simon Ball, Reihaneh Mirjalili, Michael Krawez +3 more
similarity 0.79
Abstract

While contact-rich manipulation requires deliberate regulation of interaction forces, recent approaches to robot manipulation learning predominantly represent actions as target positions or poses. Even methods that incorporate force sensing either use it solely as an observation or, when predicting forces as part of the output, rely on a hybrid force controller. In this paper, we propose an imitation learning policy that predicts wrenches as its sole action output for direct use by a pure force controller. Our studies suggest that force-domain imitation learning depends critically on data collection, with force-feedback teleoperation improving policy performance by capturing the operator's deliberate force regulation. Using Action Chunking with Transformers (ACT) as the base architecture, we train single-task models on bilateral wrench demonstrations and evaluate them on five contact-rich manipulation tasks. The wrench policy matches or outperforms position-based baselines across all tasks, with gains varying according to the degree of deliberate force regulation each task requires. Cross-condition ablations show that the bilateral data collection interface and the wrench action space each contribute independently to performance. To support further research, we will release over 1000 wrench-action demonstrations spanning these tasks on a companion website upon publication.

0.16

ForceRFT: Refining VLA Actions through Force-Guided Residual Reinforcement Learning

cs.RO ·2026-09-19 ·Yichen Wang, Chaoyang Zhang, Xuqi Su, Jun Ma, Haiyue Zhu +1 more
similarity 0.78
Abstract · 8 pages, 4 figures, 3 tables

Force-conditioned vision-language-action (VLA) policies can respond to contact, but when trained solely on demonstrations, their recovery behavior may be limited by demonstration coverage, and they do not learn from deployment outcomes. Human corrective imitation provides additional recovery examples, but its objective matches local action targets without explicitly optimizing task return. We present ForceRFT, a force-guided residual reinforcement learning framework that learns contact-dependent corrections from human supervision and autonomous task outcomes. A frozen, demonstration-trained SmolVLA-based prior generates force-conditioned action chunks, while a lightweight residual actor refines individual end-effector pose commands using wrist feedback acquired during chunk execution. The decision-time wrist wrench, its temporal change, and the selected base motion condition both residual correction and value estimation. Human corrections supervise the residual actor, while verified autonomous transitions train the twin critics and support value-guided updates to the same actor. Bootstrapping is restricted to autonomous segments, preventing TD credit from crossing human-intervention boundaries. Real-robot experiments on plug insertion, ring-on-peg assembly, and whiteboard wiping show higher autonomous success rates than the evaluated demonstration-trained and residual-imitation baselines. Comparisons with residual imitation support value-guided residual optimization, while plug-insertion ablations indicate the benefit of direct execution-time wrist feedback.

0.44

Language-Grounded Force/Torque Pretraining for Extrinsic Contact Perception

cs.RO ·2026-10-29 ·Kazuki Takahashi, Hiroaki Murakami, Ryota Sakuma, Mitsuhiro Kamezaki, Matthew Ishige +1 more
similarity 0.76
Abstract · 9 pages, 5 figures

Fine manipulation requires robots to recognize when a grasped object makes or changes contact with its environment, yet such extrinsic contact is not always directly observable from vision or local contact geometry. Force and torque signals carry this information, but also vary with object weight, grasp configuration, and robot motion, leaving it unclear whether they can provide a reusable representation of physical state. Here we show that bilateral six-axis force/torque histories can be pretrained as a semantically structured physical representation by aligning them with a frozen language space using supervision generated from simulated pick-and-place interactions. On unseen objects in simulation, the learned representation supports text-prototype readout of robot action, object weight, and grasp interaction. In real-world placement, unlabeled calibration enables contact and support-state recognition without updating the encoder, outperforming a vertical-force sign-reversal rule baseline. For connector insertion, an event absent from pretraining, low-rank adaptation improves data-efficient learning over training from scratch. These results show that force/torque histories can support both direct readout of known physical states and efficient adaptation to new extrinsic-contact events.

0.16

Beyond the End-Effector: Learning Whole-Arm Contact Manipulation from Human Demonstrations

cs.RO cs.CVcs.LG ·2026-10-13 ·Bo-Ruei Huang, Daniel Seita, Erdem Bıyık
publishedcode/data similarity 0.76
Abstract · Accepted to the 10th Conference on Robot Learning (CoRL 2026). 23 pages, 8 figures, 5 tables. Project page: https://wacl-robot.github.io

Robot manipulation has traditionally relied on end-effector-centric interactions. In contrast, humans routinely exploit whole-arm contacts to improve efficiency, robustness, and adaptability, especially when the hands are occupied or when precise grasping is unnecessary. Enabling similar capabilities in robots remains challenging: the robot must select where on its arm to make contact, generate effective non-prehensile interactions, and satisfy task-specific pose or safety constraints on the end-effector. We propose Whole-Arm Contact Learning (WACL), a hierarchical framework that describes each whole-arm contact task with three robot-agnostic representations and hands them to a quasi-static surface-contact optimizer: semantic keypoints that summarize the scene, a reference contact trajectory that specifies where and how the arm presses on the object, and safety-aware path constraints that a vision-language model generates from the task description to protect the end-effector's task. The robot's kinematic chain enters only in this optimizer, which grounds these representations onto the arm by jointly searching over which link makes contact, where on that link, and the joint configuration that realizes it. This decomposition lets WACL learn the contact trajectory from 10 bare-hand human demonstrations per task collected without teleoperation, while new end-effector constraints change only the optimizer's input rather than any trained component. Real-world experiments on a 7-DoF arm across four whole-arm tasks show that WACL sustains contact under end-effector constraints where a strong link-pose baseline fails (78% vs. 33% success) and generalizes to new constraints without retraining. Website: https://wacl-robot.github.io

0.33

RoboPace: Contact-Aware Time-Optimal Retiming for Action-Chunk Policies

cs.RO ·2026-10-07 ·Mimo Shirasaka, Takehiko Ohkawa, Takuya Okubo, Nicola Scianca, Tatsuya Matsushima +1 more
similarity 0.75
Abstract · Project: https://robopace.airoa.io/

Robot manipulation data collection has been shifting from teleoperation toward robot-free demonstrations, through interfaces such as the Universal Manipulation Interface (UMI) or directly from human hands. Vision-Language-Action (VLA) policies trained on such data inherit the demonstrator's timing. Yet human timing does not directly transfer to robots: compliant hands tolerate fast contact, whereas robots may overshoot due to actuator and tracking limitations; conversely, robots can move faster in free space. This motivates a unified approach that reconciles execution speed with contact safety. We present RoboPace, an online retiming layer that preserves the policy's geometric path while adapting its timing, respecting the target robot's kinematic and dynamic constraints. It adapts execution speed based on predicted contact, jointly accounting for contact-dependent speed limits and the robot's motion constraints. The method requires no policy retraining and operates in real time. Across three contact-rich tasks on a dual-arm robot, faster uniform execution and physical-limit-only retiming largely fail. RoboPace instead achieves higher overall success than slow uniform execution while completing four of five commands in approximately half the time, retaining the reliability of slow execution without its time cost.

0.52

Meituan-Robotics-0: A Vision-Language-Action Foundation Model for Desktop Manipulation

cs.RO cs.CV ·2026-11-05 ·Meituan Robotics Team, Caicheng Wang, Chen Zhao, Chengpeng Jin, Duo Xu +33 more
code/data similarity 0.75
Abstract · 25 pages. Project page: https://meituan-robotics.github.io/Meituan-Robotics-0/ ; Code: https://github.com/Meituan-Robotics/Meituan-Robotics-…

We present Meituan-Robotics-0 (MR0), a vision-language-action foundation model and embodied-agent system for stationary-base desktop manipulation. MR0 combines 147 million vision-language samples with 15,060 hours of curated robot trajectories spanning 12 embodiments. A three-stage training recipe aligns multimodal representations with robot behavior through discrete action-token pre-training, transfers these priors to continuous cross-embodiment control through flow-matching mid-training, and adapts the policy through real-world post-training. We introduce Rollback, which pairs replaced policy segments with human corrections to provide positive and negative supervision for CFG-DAgger without value learning or advantage labeling. A unified end-effector interface supports heterogeneous embodiments, while asynchronous action-chunk merging maintains smooth execution under variable inference latency. An event-driven agent maintains persistent task events and reassesses plans when progress or feasibility changes, enabling cross-task retrieval and conditional task resumption. MR0 achieves 93.6% success on RoboTwin 2.0 and ranks fifth in the RoboDojo VLA track. Under matched HG-DAgger post-training, MR0 achieves higher average success rate and progress score than $π_{0.5}$ across three real-robot tasks. On Ethernet insertion, CFG-DAgger trained with Rollback data reaches 70% success and a progress score of 0.90. Qualitative agent deployments demonstrate cross-task event retrieval and recovery from temporarily unsatisfied task conditions.

0.33

Learning to Leverage Compliance: A Policy-Admittance Learning Framework for Robotic Insertion

cs.RO ·2026-09-25 ·Chongren Wang, Minghe Li, Honghua Dai, Zhicheng Lin, Shiyang Wei +1 more
similarity 0.75
Abstract

Policy learning and compliant control offer a promising route to reliable autonomous assembly under pose errors and contact uncertainty. However, combining them does not ensure coordination: the policy may continue pushing against contact while the controller yields, producing sustained loading with limited progress. To address this problem, we propose LeCo (Leverage Compliance), a policy-admittance learning framework that guides a visual policy through execution-time interaction under fixed admittance. A multirate feedback mechanism aggregates high-rate contact-interaction records into policy-transition rewards. An integrated conflict cost then characterizes sustained policy-loading/controller-unloading opposition, while a directional high-force tail cost captures continued-loading events within a transition. Together with task completion, these costs encourage the policy to leverage compliance with less unproductive loading. We evaluate LeCo on four real connector-assembly tasks, obtaining an aggregate success rate of 94%. Across tasks, mean successful-trial resultant-force and torque peaks decrease by approximately 30% and 64% relative to the comparison baseline. Reward ablation further shows that adding conflict shaping reduces median successful-trial contact-conditioned conflict density by approximately 53%. These results support learning to leverage fixed compliance by turning multirate policy-admittance interaction into complementary reward signals for effective, lower-load insertion.

0.23

FACT: A Multimodal Force-Action-Track Foundation Model for Human-to-Robot Dexterity

cs.RO ·2026-10-13 ·Zhi Cao, Yining Hong, Jiaolong Yang, Yejin Choi, Li Fei-Fei +2 more
dataset similarity 0.75
Abstract

Human demonstrations offer a scalable alternative to costly robot data collection for dexterous manipulation, but most human datasets lack force measurements. Dexterous manipulation requires not only visual and proprioceptive understanding but also the ability to anticipate and regulate interaction forces. To scale force-aware human-robot co-training, we introduce EgoForce, a large-scale human tactile dataset capturing force-rich manipulation experience, and combine it with robot demonstrations for pretraining. We present FACT, a robot foundation model that cascades from prospective visual planning to force-aware refinement for dexterous manipulation. FACT comprises two jointly trained components. A Track-Guided Coarse Planner jointly predicts actions, future video, and visual tracks. Future video and visual tracks also provide a shared task representation that facilitates cross-embodiment knowledge transfer and coarse action generation. Building on this coarse plan, a Force-Action Joint Refiner jointly predicts future force and refines the coarse action, allowing anticipated force and action to shape each other during refinement. We evaluate the model on ten tasks requiring fine-grained coordination and force feedback, including tool use, musical instruments, and precision laboratory procedures. Using as few as 10 robot trajectories with 90 human trajectories for fine-tuning, FACT outperforms both baselines, with success-rate gains of up to 60 percentage points over T-Rex. Ablations show that force supervision in human pretraining data is crucial for downstream robot performance after fine-tuning, while visual track prediction and training with future-force prediction improve dexterous execution. Experiments varying the human-robot data ratio during fine-tuning further suggest that FACT learns from human demonstrations nearly as effectively as from robot demonstrations.

0.15