CS Paper Radar

Manipulation with Stability Guarantees: Linear Deformable Objects with Non-negligible Physical Response Grasped at Multiple Location

Daniel Feliu-Talegon, Cosimo Della Santina

cs.RO ·submitted 2026-09-22 11:07 UTC · v1

Abstract

Most research on the manipulation of deformable objects focuses on lightweight systems with negligible mechanical response, effectively restricting attention to quasi-static regimes. This assumption excludes a broad class of practically relevant objects, such as hoses, pipes, and wiring harnesses, whose dynamics cannot be ignored during manipulation. In this work, we address this limitation by introducing a closed-loop control architecture that explicitly accounts for object dynamics and recasts manipulation as a shape-regulation problem. Control is achieved by modulating forces and torques applied at multiple fixed points along the object. This approach builds on three methodological contributions: a fully dynamic model of linear deformable objects based on discrete strain parameterizations; an extension of the notion of actuation coordinates to SE(3), yielding a structured and inherently underactuated control architecture; and nonlinear feedback strategies providing explicit conditions for steady-state convergence to desired configurations. Extensive simulations on representative manipulation tasks demonstrate the performance gains enabled by the proposed modelbased formulation. We finally validate the approach experimentally through a real-time closed-loop implementation with online shape estimation, confirming its practical feasibility and effectiveness

Comment
19 pages, 13 figures

Closest papers

Nearest neighbours by meaning across the whole index.

A Tutorial on Shape Servoing of Deformable Objects-Part I: Fundamentals

cs.RO eess.SY ·2026-10-29 ·Ignacio Cuiral-Zueco, Alessio Caporali, Miguel Aranda, Gianluca Palli, Gonzalo López-Nicolás +1 more
code/data similarity 0.68
Abstract · Part I of a two-part tutorial. 9 pages, 5 figures. Code: https://github.com/nachocz/tutorial_on_shape_servoing_of_deformable_objects. Intera…

In robotics, shape control (or shape servoing) refers to the automatic manipulation of a deformable object to achieve a desired shape. It involves a feedback loop that exploits the relation between robot motion and changes in the measured shape. This relation, known as the interaction Jacobian or, in this context, the deformation Jacobian, depends on the object's mechanical properties, geometry, and boundary conditions (e.g., where the object is grasped). Because these factors are often difficult to model accurately, the deformation Jacobian can be estimated locally from observed shape changes produced by commanded robot motions, without requiring a fine-tuned mechanical model. This article is the first of a two-part tutorial on data-driven Jacobian-based shape control of deformable objects. It introduces the central elements of the approach: the formulation of the shape-control problem, shape representation, estimation and online update of the deformation Jacobian, and a standard control law from the literature. It then assembles these elements into a complete shape-servoing loop, derives a local stability condition for this loop, and illustrates why some target shapes cannot be reached. Part II covers more advanced topics. Throughout both parts, a simulated planar example in which two robot arms manipulate an elastic rod observed by a camera illustrates the concepts.

0.42

Real-Time Shape Control of Multi-Segment Soft Robotic Arms Using Koopman Operators with Global and Local Observables

cs.RO eess.SY ·2026-09-02 ·Jiahe Wang, Eron Ristich, Sultan Haidar Ali, Eric weissman, Lei Zhang +3 more
similarity 0.67
Abstract · 18 pages, 14 figures, submitted to TRO

Multi-segment soft robotic arms can continuously reconfigure their body shapes for safe interaction, but tip control alone is insufficient for constrained-space tasks. Therefore, shape control is a more important task for multi-segment soft arms than tip control, but remains challenging due to the high dimensionality and nonlinear dynamics of continuum deformation. In existing work, shape control accuracy is defined by the error in the global frame (global shape error). For multi-segment soft arms, using only global shape error as the control objective is insufficient, as segment coupling, gravity-induced loading, and inertial effects become more significant. This difficulty increases with the number of segments. In this paper, we present a Koopman-based model predictive control framework that combines global and local observables, enabling real-time shape control on multi-segment soft robotic arms. The framework is evaluated through numerical and physical experiments. Numerical experiments demonstrate the scalability of the proposed controller by achieving shape control on robots with up to 10 independently actuated segments. The physical experiments demonstrate that the controller is capable of (1) real-time shape control of 3- and 5-segment robotic arms with tip speeds up to 0.6 m/s, (2) robust tracking without retraining, including distal payloads up to 400~g and recovery from a 7~N lateral disturbance, and (3) the potential for future inspection applications through a confined-space demonstration. These results demonstrate that the proposed framework enables dynamic, scalable, and accurate real-time shape control on multi-segment soft robotic arms.

0.35

Task-space model-based control of pneumatic soft actuators

cs.RO ·2026-08-27 ·Nithin S. Kumar, Joshua Gaston, D. Caleb Rucker, Eric J. Barth
top venue similarity 0.64
Abstract · 11 pages, 14 figures

Soft actuators enable dexterous and compliant interaction, but closed-loop task-space control remains challenging due to strong nonlinearities, distributed deformation, and uncertainty in their dynamics. This paper presents a real-time dynamic-model-based task-space feedback and estimation framework based on a non-minimal coordinate discrete elastic rod model formulated in absolute coordinates with holonomic constraints. The resulting structure preserves distributed mechanics while maintaining computational efficiency through sparse system matrices, enabling real-time control with up to 10 discretized rods. A quasi-static feedforward inverse model is combined with a task-space PI controller and a dynamic observer that fuses measurement residuals as virtual forces, enabling full-state estimation from sparse sensing. The approach is experimentally validated on three planar pneumatic soft actuators with varying geometries. Across five tasks, including drawing the digits 0-9 across the workspace (3-18 mm/s tip speed), tracking periodic motion (up to 37 cm/s), cross-platform generalization, reduced sensing conditions, and real-time user-defined references, our method achieves 1.5-2.3 mm root mean square error (RMSE) for precision motions and 5.5-12.4 mm RMSE at 1-2 Hz. Results demonstrate that structured, non-minimal dynamic models can enable real-time, high-precision, moderate-bandwidth task-space control of planar soft pneumatic actuators in free space.

0.27

Learning the Dynamics of Deformable Linear Objects Through Coupled Oscillators for Bimanual Robotic Manipulation

cs.RO ·2026-11-17 ·Iván López-Broceño, Maximilian Stölzle, Daniel Feliu-Talegon, Daniela Rus, Cosimo Della Santina
similarity 0.63
Abstract

Many learning-based approaches for deformable linear objects (DLOs) rely on simplified deformation models that neglect dynamic effects and the mechanical response of the objects, limiting their applicability to lightweight, compliant objects and slow motions. Inspired by recent advances in learning physically structured dynamics with coupled oscillator networks (CONs), we propose $Φ$-CON for learning force-driven DLO dynamics. The model combines a floating-base coupled oscillator network (FBCON), whose latent potential energy depends only on the DLO's shape, with a learned affine diffeomorphism $Φ$ between observed positions along the DLO and latent coordinates. Its shape dynamics are stable by construction, and its Lagrangian structure yields explicit expressions for kinetic and potential energy. We exploit this structure to design a model-based proportional-derivative (PD) controller that compensates for the learned potential forces, thereby establishing closed-loop stability guarantees and ensuring convergence. We evaluate the approach on four simulated DLOs and a real bimanual robot setup. In simulation, $Φ$-CON achieves prediction accuracy comparable to neural ordinary differential equation (NODE) models and Lagrangian neural networks (LNNs), with $97.2\%$ and $90.2\%$ fewer parameters, respectively. Relative to a model-free PD baseline, the proposed controller reduces mean endpoint regulation error by $97.5$-$99.7\%$ in simulation and achieves a mean per-target reduction of $27.9\%$ across both endpoints in real-world experiments, demonstrating the importance of explicitly accounting for the mechanical response of stiff and heavy objects.

0.25

Refine Where It Matters: Contact-Adaptive Meshing for Deformable Object Manipulation

cs.RO ·2026-10-09 ·Gabriel Johnson, Tom Olesch, Fei Liu
hot direction similarity 0.62
Abstract

Deformable-object manipulation requires accurate modeling of highly localized contact while maintaining simulation speeds suitable for interactive use. Uniformly fine tetrahedral meshes can resolve these interactions, but they introduce unnecessary degrees of freedom throughout the object. Coarse meshes are more efficient, yet they may under-resolve contact-induced deformation. We present a contact-adaptive mesh refinement framework that introduces spatial resolution only where it is most useful. The method uses geometric, elastic, and contact quantities already available from the deformable-body solver to score candidate edges. A fully GPU-parallel procedure then selects a conflict-free subset and updates both mesh topology and physical state directly within the simulation loop. We evaluate the approach on real deformable-object manipulation sequences. Adaptive refinement reduces simulation-to-real error, improves agreement with a fine-mesh reference, and remains substantially more efficient than uniformly fine simulation. These results show that local refinement can improve physical fidelity without incurring the cost of a globally fine discretization. The framework provides a practical basis for contact-rich simulation in interactive manipulation, sim-to-real modeling, and online physical digital twins.

0.24

A Tutorial on Shape Servoing of Deformable Objects-Part II: Advanced Concepts

cs.RO eess.SY ·2026-11-02 ·Ignacio Cuiral-Zueco, Alessio Caporali, Miguel Aranda, Gianluca Palli, Gonzalo López-Nicolás +1 more
code/data similarity 0.62
Abstract · Part II of a two-part tutorial. 10 pages, 9 figures. Code: https://github.com/nachocz/tutorial_on_shape_servoing_of_deformable_objects. Inte…

In robotics, shape control, or shape servoing, refers to the automatic manipulation of a deformable object toward a desired shape. This article is the second of a two-part tutorial on data-driven, Jacobian-based shape control, in which the deformation Jacobian, a local model of how robot motion changes the measured shape, is estimated from measurements. Part I built the shape-servoing loop and derived a local stability condition. This paper starts by using the singular value decomposition of the deformation Jacobian to identify shape changes that can be produced by small robot motions, those that require large robot motions, and those that are locally unavailable. It then analyses how the choice of shape features determines how the controller regulates the object's shape and, therefore, how much the object deforms on its way to the target. It then describes three ways in which the shape control loop can fail: loss of controllability, loss of observability, and occurrence of mechanical instabilities. It closes with shape-control extensions to time-varying targets, secondary tasks, and three-dimensional objects.

0.33

Collocated Shape Regulation for Soft Robots

cs.RO eess.SY ·2026-09-23 ·Pietro Pustina, Ebrahim Shahabi, Daniel Feliu-Talegon, Alessandro De Luca, Cosimo Della Santina
hot direction similarity 0.62
Abstract · 33 pages, 22 figures

Controlling the shape of a continuum soft robot typically requires an accurate dynamic model and actuation of all degrees of freedom. We show that regulating only the actuated coordinates, through collocated shape control, achieves provably stable convergence of those coordinates and, under an explicit compatibility condition, of the entire robot shape. While collocated control is a cornerstone of high-performance motion control in rigid robotics, extending this formulation to continuum soft robots has remained challenging due to the complexity of their dynamics. We present the first general framework for collocated control of continuum soft robots and derive a unified family of controllers, including PD, PID, PsatID, and their counterparts with compensation and cancellation components. The framework unifies existing approaches while introducing new controller designs. In particular, we develop three classes of PD and PID like regulators with local, semi-global, and global stability guarantees, and provide rigorous convergence analyses for each. Extensive experimental validation demonstrates the effectiveness of the proposed methods across different model discretizations and controller parameters. The resulting framework provides practical design guidelines for selecting and implementing controllers with known stability guarantees, without requiring a complete dynamic model of the robot

0.33

Suspended-Fabric Robotic Manipulation Surfaces: Modelling, Design Space, and Multimodular Extensio

cs.RO ·2026-10-30 ·Pratik Ingle, Jørn Lambertsen, Kasper Støy, Andres Faiña
similarity 0.62
Abstract

Robotic Manipulation Surfaces (RMS) reposition objects by deforming the surface on which they rest. A recent class of RMS suspends a continuous fabric sheet from a sparse grid of vertical linear actuators lowering the actuator density of such surfaces but how to design such surfaces so that objects can be controlled everywhere on it, and how to extend it beyond a single module so that objects can pass between modules and achieve parallel, remain open. This paper presents a separable catenary model of the suspended sheet that is fast to compute and provides both the surface shape for given actuator heights and the actuator heights for a desired local slope. The closed form inverse lets a simple PID controller position objects on the sheet, and the model relates fabric length, module span and actuator stroke to the reachable workspace, yielding a minimum fabric length bound and design charts for these surfaces. The approach is then extended to a multimodular platform in which neighbouring modules share actuators. On a $2 \times 2$ prototype, we demonstrate that centimetre-scale objects are transferred between modules and positioned within 0.03 m over a $1 m^2$ workspace with only nine actuators, enabling multi-object manipulation and opening the way to parallel manipulation.

0.21