CS Paper Radar

ARTiS: An Adaptive Robotic Gripper for Enhanced Tool Manipulation in Disassembly Applications

Roman Mykhailyshyn, Yukiyasu Domae, Kensuke Harada

cs.RO ·submitted 2026-09-03 04:38 UTC · v2
top venue

Abstract

Grasping and holding tools while using them presents a considerable challenge not only for robots but also for humans. Such a challenge is particularly noticeable in processes involving assembly and disassembly, where efficiency and consistency depend on performing rapidly adaptive tasks. Nonetheless, contemporary robotic grasping technologies that can securely manipulate tools during operation frequently have significant constraints. In this paper, introduce ARTiS (Adaptive Robotic Tool Gripper in Disassembly Systems), a novel gripper that combines the adaptability of soft grippers, the dexterity of anthropomorphic hands, and the robustness of rigid mechanisms with a soft palm and fingertips. This unique combination makes it possible to hold tools securely in a variety of situations through using active jamming in the palm and fin-ray adaptation in fingertips. Furthermore, high finger dexterity is achieved through the seven degrees of freedom design, which enables the fingertips to orient to any surface, both for automated solutions and collaborative tasks. A comprehensive evaluation was conducted using a range of conventional disassembly tools to assess the gripper's compliance, durability, and functional versatility. More information, hardware instructions, and videos at https://romanmykhailyshyn.github.io/artis/

DOI
10.1109/TASE.2026.3731571

Closest papers

Nearest neighbours by meaning across the whole index.

Koala Gripper: Co-designing Robotic Grippers and Data-Capture Devices for Scaling Dexterous Manipulation Learning

cs.RO ·2026-08-20 ·Amar Hajj-Ahmad, Zubin Kremer Guha, Tim Fofonoff, Zhi Ern Teoh, Ciarán T. O'Neill +6 more
similarity 0.71
Abstract · Paper website: http://koalagripper.rai-inst.com Paper video: http://www.youtube.com/watch?v=ZoygFCWAVhg

As the demand for larger manipulation datasets grows, handheld robotic gripper data collection and the associated gripper designs become more vital. Current data collection device designs trend towards matching the morphologies of existing robotic grippers, sacrificing ergonomics and manipulation performance. In this paper, we propose a co-design framework that guides the simultaneous development of both data collection and robotic execution devices by weaving both platform constraints into the design process. Through this workflow, we present the Koala Gripper system, a data capture device and robotic gripper platform that improves dexterity and grasp capability compared to parallel jaw grippers while preserving scalability and ease-of-use. The design introduces a novel force-optimized finger/trigger linkage mechanism with directional reflected mass characteristics, a unique monolithic dual-thumb, and user-centered ergonomic design. The design's actuated robotic fingers are backdrivable, with effective mass on the order of tens of grams. We show that these grippers are capable of secure grasps over a wide range of objects, forceful tool use, and precise singulation. We further validate the platform by deploying it with an end-to-end data collection and policy execution pipeline that highlights its capabilities through learning from demonstration. More information available at http://koalagripper.rai-inst.com

0.47

Active Surface-Driven Reconfigurable Gripper: Robust Grasping and Sequential Manipulation of Thin Objects

cs.RO ·2026-08-27 ·Ziyi Zheng, Keqi Zhu, Hao Wu, Yanzhe Wang, Huixu Dong
published similarity 0.69
Abstract · Accepted by RSS2026

Robotic grippers face substantial challenges in grasping and manipulating thin objects. Most existing grippers rely on highly precise approach and grasp motions, which limits robustness and reduces applicability. This paper explores thin-object grasping using books as a representative example. Here, we propose a novel solution that integrates an active surface with underactuated compliance to achieve stable grasping of thin objects without complex control. First, an underactuated gripper with an active surface is designed. The active-surface thumb performs in-hand repositioning of the target book without requiring adjustments of the robot arm or the other fingers, while the underactuated fingers establish compliant contact conditions with the environment, and the reconfigurable structure enables reliable grasping of books under different configurations. Second, we establish a kinematic model of the gripper, and determine the initial grasp postures for two representative scenarios (books lying flat on a desktop and books vertically packed in a shelf). Third, by analyzing the physical model of a book lying on a table and its interaction with the gripper and the environment, we systematically optimize the structural parameters and grasping strategy. Finally, extensive experiments validate the effectiveness of the proposed gripper and strategy. The results demonstrate strong robustness and adaptability when grasping thin objects placed flat (including books, paper, fabric, plastic film, and mouse pad), as well as a high success rate when grasping vertically packed books. Moreover, the proposed gripper can reliably complete long sequential "grasp-place" tasks.

0.21

A Reconfigurable Dual-Opposition Architecture for Single-Hand Assembly and Manipulation

cs.RO ·2026-09-19 ·William Su, Yunosuke Nakamura, Yixiao Wang, Yitong Li, Mingrui Yu +4 more
similarity 0.69
Abstract · 9 pages, 7 figures, 2 tables

In-hand assembly is constrained by the need to maintain grasps on two separate parts while controlling their relative motion within a single hand. To enable both in-hand assembly and manipulation, we present a reconfigurable dual-opposition architecture. Specifically, to support simultaneous grasping of two parts and coordinated in-hand manipulation, four independently actuated fingers are organized into two virtual finger (VF) oppositions, with their relative configuration controlled by a reconfigurable palm. To describe hand motion and simultaneous two-object grasping configurations, a kinematic model of the fingers and palm and an object-size-conditioned workspace formulation are built. To further evaluate motion performance and assembly capability, finger-joint motion and palm tracking are characterized, and in-hand assembly is demonstrated through tasks involving grasping, alignment, fastening, and pressing. Ablation experiments further demonstrate the importance of finger abduction/adduction and palm reconfiguration for successful in-hand assembly. In simulation, the proposed hand achieves a mean continuous sphere rotation success rate of 98.6% over diameters of 40-230 mm, compared with 73.8% for the LEAP Hand. After policy fine-tuning with external disturbances, the proposed hand achieves 92.8% success under disturbances from multiple directions, compared with 45.2% for the LEAP Hand. Hardware demonstrations further show in-hand rotation of objects of different sizes using policies trained in simulation. Together, these results show that the proposed architecture supports both assembly of two separately held parts and coordinated manipulation of a single object within one hand.

0.51

ORBIT: A Modular Multi-finger Robotic Hand Platform with Rotational Finger Reconfiguration

cs.RO ·2026-10-23 ·Benito Ribadeneira, Siqi Shang, Lillian Chin
similarity 0.68
Abstract · NA

Despite the popularity of multi-fingered robotic hands for dexterous manipulation, there is no systematic platform to compare different hand morphologies against one another. We present ORBIT (Orbital Reconfigurable Base-actuated Integrated Theta-motion Hand), a modular platform designed to enable principled exploration of multi-fingered hand morphology. The core contribution of ORBIT is a rotating knuckle mechanism, where independent fingers travel around a cylindrical palm via a belt drive. This enables ORBIT to perform quick recon- figuration (< 1 s) of finger layout without hand disassembly. ORBITs a robust system, with finger average angular velocity of 1.57 rad / s1 and a root finger force resistance of 50 N. Using a three fingers instantiation of ORBIT, we demonstrate an initial pilot grasping study, comparing anthropomorphic, isometric, and Barrett-style finger layouts across eleven objects of varied size, shape, and texture. We further demonstrate how ORBITs nonanthropomorphic orbital DOF enables the achievement of tasks that would be difficult to perform with fixed-knuckle designs, such as cube face reorientation, lid threading, and precision pinching of sub-centimeter objects. These results establish ORBIT as a viable platform for direct apples to apples comparison of multi-fingered hand morphologies for specific manipulation tasks

0.21

The Cartesian Hand: In-Hand Manipulation with All-Linear Fingers

cs.RO ·2026-09-22 ·Boxi Xia, Bokuan Li, Ryan Shin, Zijiang Yang, Jiaxun Liu +1 more
code/datahot direction similarity 0.67
Abstract · 9 pages, 7 figures

Robotic manipulation has increasingly pursued human-like dexterous hands with many articulated degrees of freedom, offering rich manipulation capabilities at the cost of mechanical and control complexity. At the other extreme, parallel grippers are simple and robust, but provide little ability to manipulate an object after grasping it. Operating articulated objects such as threaded containers, manufacturing tools, and laboratory instruments often requires a second gripper, an external fixture, or coordinated arm motion. We introduce the Cartesian Hand, a 7-DoF end-effector that rethinks dexterous manipulation by combining independent grasping and relative manipulation within a single end-effector using only linear motion. Two independently actuated parallel grippers hold different parts of an object, while four translating fingertips generate relative motion between the grasped parts. Its configuration-independent fingertip kinematics allow manipulation to be composed from simple linear motion primitives. The Cartesian Hand is particularly suited to objects structured around common mechanisms such as threads, pivots, linear guides, plungers, and triggers. We demonstrate cap opening and closing, pipetting, pumping, two-handle manipulation, screwdriving, trigger actuation, and in-grasp reorientation across 35 objects spanning laboratory, manufacturing, and household settings. The same manipulation procedures transfer from a fixed-base robot arm to a humanoid, where we demonstrate bimanual laboratory manipulation using two Cartesian Hands. These results show that versatile in-hand manipulation capability can emerge from a mechanically simple architecture when independent grasping and relative motion are designed directly into the end-effector. We will open-source all software and hardware design. Our website is https://generalroboticslab.com/cartesian_handv1.

0.41

Benchmarking Dexterity of Multifingered Robot Hands: A Review and Perspective

cs.RO ·2026-09-04 ·Anthony Shilati, Anunth Ramaswami, Luke Batteas, Sylvia Tan, Anthony Barcio +14 more
publishedsurveybenchmark similarity 0.67
Abstract · To be published in the $Annual$ $Review$ $of$ $Control$, $Robotics$, $and$ $Autonomous$ $Systems$, Volume 10, 2027

Robot hands are a key interface between AI and the physical world, making advances in robotic dexterity essential to realizing the vision of physical AI. While impressive dexterity has been demonstrated with simple grippers, multifingered hands offer the potential for substantially greater versatility, precision, and adaptability in manipulation. In this review, we survey the state of the art in benchmarking the dexterity of multifingered robot hands. Recognizing dexterity as a complex and multifaceted concept, we present the perspective of the U.S. National Science Foundation HAND Engineering Research Center, with a particular focus on fine in-hand manipulation. We introduce a framework consisting of three benchmark levels that correspond to increasing system complexity, review representative benchmarks at each level, and propose new benchmarks and metrics to address limitations in the literature. More information can be found at https://hand-erc.github.io/benchmarking/.

0.24

Relative Contact Velocity-Controlled Hand-Object Mechanism for Dexterous Tool Manipulation

cs.RO ·2026-09-22 ·Sunyu Wang, Jean Oh, Nancy S. Pollard
hot direction similarity 0.66
Abstract

This work investigates how to enable general multi-finger robotic hands to perform the complete tool manipulation process, which entails picking up a tool, loading it into a suitable pose, and then wielding it. Inspired by human tool manipulation and mechanical design principles, we model the hand and the tool as a unified hand-object mechanism (HOM) composed of sub-assemblies. Specifically, we define a HOM as consisting of the hand, the object, and the generalized contact frames, allowing the HOM's motions to be expressed with the same set of Cartesian-space relative contact velocities, irrespective of the hand's kinematics and geometry. Then, we define a HOM's sub-assemblies as relative contact velocity and contact force constraints between fingers. Building on these definitions, we developed a lightweight and physically interpretable motion planning and contact estimation framework using least squares and a complementary filter. We evaluated our framework in simulation by teleoperating five different robotic hands. The results show that our framework enabled all five hands to execute the complete tool manipulation process, achieving dexterous behaviors even from identical, simple reference trajectories. Furthermore, the results showcase our framework's adaptability to different hands, tools, and tasks, enabled by its kinematic and geometric foundation. Please visit website for videos: \href{https://sunyuw.github.io/hom-sim/}{https://sunyuw.github.io/hom-sim/}

0.33

A Support-Enhanced Granular-Jamming Gripper for RL-based Grasping with Continuum Manipulators

cs.RO ·2026-09-24 ·Danyu Liu, Tianlin Zhang, Wei Chen, Wei Tang, Kecheng Qin +1 more
hot direction similarity 0.66
Abstract · 8 pages, 10 figures

Continuum manipulators provide dexterous motion in confined spaces, but structural compliance, hysteresis, and load-dependent deformation leave residual position and orientation errors that can undermine reliable contact with rigid grippers. To address this limitation, this paper presents a lightweight support-enhanced granular-jamming gripper tailored to a continuum manipulator. The gripper maintains compliance before jamming while establishing a direct load path to the continuum manipulator tip after jamming. To improve its grasping performance, we systematically designed membrane materials, particles, filling ratios, and the internal support structure, and further identify geometry-dependent grasp boundaries with respect to contact offset and object shape. Building on these results, we construct a physical manipulation system integrating the continuum manipulator, granular-jamming gripper, visual feedback, tendon actuation, and pneumatic control. We then train a reinforcement-learning-based reaching controller in a randomized simulation and deploy it on the physical system, demonstrating how positioning control and contact level mechanical adaptation can complement each other in a modular grasp-and-release task. By introducing an adaptive structure that relaxes the need for highly accurate modeling and positioning control, this work explores a design paradigm that integrates physical and embodied intelligence.

0.55