CS Paper Radar

Relative Contact Velocity-Controlled Hand-Object Mechanism for Dexterous Tool Manipulation

Sunyu Wang, Jean Oh, Nancy S. Pollard

cs.RO ·submitted 2026-09-22 03:25 UTC · v3
hot direction

Abstract

This work investigates how to enable general multi-finger robotic hands to perform the complete tool manipulation process, which entails picking up a tool, loading it into a suitable pose, and then wielding it. Inspired by human tool manipulation and mechanical design principles, we model the hand and the tool as a unified hand-object mechanism (HOM) composed of sub-assemblies. Specifically, we define a HOM as consisting of the hand, the object, and the generalized contact frames, allowing the HOM's motions to be expressed with the same set of Cartesian-space relative contact velocities, irrespective of the hand's kinematics and geometry. Then, we define a HOM's sub-assemblies as relative contact velocity and contact force constraints between fingers. Building on these definitions, we developed a lightweight and physically interpretable motion planning and contact estimation framework using least squares and a complementary filter. We evaluated our framework in simulation by teleoperating five different robotic hands. The results show that our framework enabled all five hands to execute the complete tool manipulation process, achieving dexterous behaviors even from identical, simple reference trajectories. Furthermore, the results showcase our framework's adaptability to different hands, tools, and tasks, enabled by its kinematic and geometric foundation. Please visit website for videos: \href{https://sunyuw.github.io/hom-sim/}{https://sunyuw.github.io/hom-sim/}

Closest papers

Nearest neighbours by meaning across the whole index.

GOTT: Object-centric Dexterous Manipulation with a Reusable Cross-Embodiment Primitive

cs.RO cs.AIcs.CV ·2026-10-02 ·Yulin Liu, Lai Wei, Yen-Jen Wang, Akash Sharma, Pieter Abbeel +2 more
code/data similarity 0.76
Abstract · Project page: https://dex-gott.github.io/

Foundation models and large-scale human data provide rich sources of manipulation intent, but translating this intent into multi-fingered robot behavior remains difficult. Dexterous hands still lack a reusable low-level primitive that reliably establishes contact across tasks and embodiments. We propose GOTT, a reach-acquire-move framework built around a single cross-embodiment contact-acquisition primitive. Given a robot-agnostic object trajectory and a reach specification, GOTT first brings the hand near a task-relevant contact region. The shared closed-loop primitive then establishes stable contact from this approximate initialization, and a pose-conditioned controller tracks the desired object motion. Reach specifications may come from future-aware planning, external models, or human demonstrations, while the primitive and tracking backend remain unchanged. Simulation and real-world experiments show that GOTT is able to establish robust contact across diverse objects, arm-hand platforms, and seen and unseen hand morphologies. It also consistently improves end-to-end task success over open-loop grasp execution.

0.45

A Reconfigurable Dual-Opposition Architecture for Single-Hand Assembly and Manipulation

cs.RO ·2026-09-19 ·William Su, Yunosuke Nakamura, Yixiao Wang, Yitong Li, Mingrui Yu +4 more
similarity 0.74
Abstract · 9 pages, 7 figures, 2 tables

In-hand assembly is constrained by the need to maintain grasps on two separate parts while controlling their relative motion within a single hand. To enable both in-hand assembly and manipulation, we present a reconfigurable dual-opposition architecture. Specifically, to support simultaneous grasping of two parts and coordinated in-hand manipulation, four independently actuated fingers are organized into two virtual finger (VF) oppositions, with their relative configuration controlled by a reconfigurable palm. To describe hand motion and simultaneous two-object grasping configurations, a kinematic model of the fingers and palm and an object-size-conditioned workspace formulation are built. To further evaluate motion performance and assembly capability, finger-joint motion and palm tracking are characterized, and in-hand assembly is demonstrated through tasks involving grasping, alignment, fastening, and pressing. Ablation experiments further demonstrate the importance of finger abduction/adduction and palm reconfiguration for successful in-hand assembly. In simulation, the proposed hand achieves a mean continuous sphere rotation success rate of 98.6% over diameters of 40-230 mm, compared with 73.8% for the LEAP Hand. After policy fine-tuning with external disturbances, the proposed hand achieves 92.8% success under disturbances from multiple directions, compared with 45.2% for the LEAP Hand. Hardware demonstrations further show in-hand rotation of objects of different sizes using policies trained in simulation. Together, these results show that the proposed architecture supports both assembly of two separately held parts and coordinated manipulation of a single object within one hand.

0.51

3DTouch: A Tactile-aware VLA Model with 3D Geometric Relations for Dexterous Manipulation

cs.RO ·2026-11-18 ·Xin Zhang, Shiqi Zhang, Siyuan Cao, Juncheng Cai, Yedong Shen +7 more
similarity 0.73
Abstract

In contact-rich dexterous manipulation, occlusion by the fingers and interacting objects obscures local geometry, preventing visual observations from fully capturing contact locations. Visually similar scenes may also differ subtly in the relative positions of interacting objects, leading to different contact states. We propose 3DTouch, a tactile-geometric conditioning approach for vision-language-action (VLA) models. 3DTouch constructs a shared 3D visuo-tactile representation by expressing RGB-D scene points and dense five-finger tactile measurements in the robot-base frame, preserving each taxel's spatial location and force vector. Hand-object and object-object relations derived from hand landmarks and pose-aligned reconstructed surfaces explicitly describe the relative arrangement of interacting entities. Together, these representations condition the VLA action expert on spatially localized contact forces and relative surface geometry, providing explicit cues for contact adjustment and object alignment. We evaluate 3DTouch on five real-world contact-rich dexterous manipulation tasks using a UR7e robot arm equipped with an XHand dexterous hand. 3DTouch improves the average success rate by 42 percentage points over the corresponding VLA baseline and by 20 percentage points over the strongest evaluated alternative. Ablation studies reveal the complementary benefits of scene geometry and spatial tactile feedback, with further gains from shared spatial grounding and explicit geometric relations.

0.19

Kinematic-Tactile Aligned Dexterous Retargeting with Contact Wrench Space Alignment

cs.RO ·2026-10-29 ·Xinyuan He, Ziheng Xu, Yueyuan Chen, Yufan Ye, Yuanshuo Tan +4 more
similarity 0.73
Abstract · 8 pages

Human demonstrations provide a natural and scalable source of data for learning dexterous manipulation policies. However, existing retargeting methods primarily transfer human kinematics, while the tactile information underlying physical interaction is rarely preserved across embodiments. To address this limitation, we present a hierarchical three-stage framework for kinematic-tactile aligned dexterous retargeting. We use object-centric contact wrench space as a physical representation for tactile alignment between human and robot hands. The framework first aligns hand kinematics and contact geometry, and then constructs a human wrench support profile from tactile forces and contact geometry. Robot fingertip force targets are subsequently optimized to cover the human wrench support and converted into joint position corrections, yielding directly replayable robot hand trajectories. We evaluate the framework in simulation and real robot experiments across three pouring conditions. In the real robot experiments, our method achieves a 96.7\% replay success rate and higher wrench transfer fidelity than representative retargeting baselines. The framework enables physically grounded transfer of kinematic and tactile information from human demonstrations to robot hands, providing a path toward scalable learning of contact-rich dexterous manipulation.

0.14

DexRemo: A Force-Sensing Hand Platform and Task Suite for Contact-Rich Removal Manipulation

cs.RO cs.LG ·2026-11-11 ·Liman Wang, Hanyang Zhong, Sun Zhaole, Wenting Cao, Babar Jamil +3 more
publishedbenchmark similarity 0.73
Abstract · Accepted for publication in IEEE Transactions on Robotics (T-RO), 2026. Project website: https://dexremo.github.io

Many manipulation tasks require separating adhered, embedded, contaminated, or mechanically constrained targets. We study this setting as removal manipulation, where progress depends on evolving contact states that are only partially observable from vision and kinematics. We introduce DexRemo, a three-finger robotic hand with high-force actuation, modular fingertips, and three-axis fingertip force sensing, together with a nine-scenario real-robot task suite spanning adhesive detachment, surface cleaning and self-cleaning, and occluded retrieval. To make multi-finger force observations easier to fuse, we express fingertip forces in a shared wrist-centered frame, giving force components consistent geometric meaning across fingers and time. Using an Action Chunking Transformer backbone, policies fuse multi-view vision, proprioception, fingertip pose, and force observations to predict closed-loop action chunks from demonstrations. Evaluation uses six core benchmark tasks for controlled fingertip-input and force-frame ablations, plus three extension scenarios for additional held-out coverage. Across these evaluations, the learned policies achieve consistent removal performance, and ablations show that wrist-frame forces, especially with fingertip pose, improve stability and generalization over local-frame force inputs and no-force baselines. Project website: https://dexremo.github.io

0.24

Benchmarking Dexterity of Multifingered Robot Hands: A Review and Perspective

cs.RO ·2026-09-04 ·Anthony Shilati, Anunth Ramaswami, Luke Batteas, Sylvia Tan, Anthony Barcio +14 more
publishedsurveybenchmark similarity 0.73
Abstract · To be published in the $Annual$ $Review$ $of$ $Control$, $Robotics$, $and$ $Autonomous$ $Systems$, Volume 10, 2027

Robot hands are a key interface between AI and the physical world, making advances in robotic dexterity essential to realizing the vision of physical AI. While impressive dexterity has been demonstrated with simple grippers, multifingered hands offer the potential for substantially greater versatility, precision, and adaptability in manipulation. In this review, we survey the state of the art in benchmarking the dexterity of multifingered robot hands. Recognizing dexterity as a complex and multifaceted concept, we present the perspective of the U.S. National Science Foundation HAND Engineering Research Center, with a particular focus on fine in-hand manipulation. We introduce a framework consisting of three benchmark levels that correspond to increasing system complexity, review representative benchmarks at each level, and propose new benchmarks and metrics to address limitations in the literature. More information can be found at https://hand-erc.github.io/benchmarking/.

0.24

Bench2Dex: Benchmarking Visuo-Tactile Bimanual Dexterous Manipulation Across Dexterous Hands

cs.RO cs.AIcs.CV ·2026-09-14 ·Zhenjie Yang, Yideng Zhang, Dongjie Zhang, Chenyu Jiang, Xianshuai Liu +19 more
benchmarkcode/datahighly cited similarity 0.72
Abstract · Technical Report. Project Page: https://bench2dex.github.io/

Tactile sensing provides contact information that can be difficult to infer from vision alone, but tactile hardware for dexterous hands has not converged to a common design. Dexterous hands differ in finger structure, contact surfaces, and sensor layouts, while simulated tactile signals still differ from measurements produced by physical sensors. These factors make it difficult to study visuo-tactile manipulation across diverse dexterous hands within a consistent experimental setting. We present Bench2Dex, a simulation benchmark for visuo-tactile bimanual manipulation across 12 dexterous hands. We adapt existing robot models with a shared simulated tactile interface that converts local contact geometry into image-like tactile observations. The interface provides a consistent observation format across different hand morphologies without attempting to reproduce the output of a specific physical tactile sensor. Bench2Dex includes 26 bimanual manipulation tasks that involve tool use, articulated-object interaction, and multi-stage manipulation, together with about 1.3K human-teleoperated demonstrations. The benchmark provides synchronized visual, tactile, proprioceptive, action, and object-state observations, together with executable task metrics. For robustness, we group seven perturbation types into invariance axis, where the correct action does not change, and equivariance axis, where the correct action changes together with the perturbation. We evaluate ACT, Diffusion Policy, pi0.5, and GR00T N1.5 on Bench2Dex and report their performance and failure modes. Bench2Dex is meant as a platform for studying visuo-tactile learning across dexterous hands. It does not assume that simulated tactile observations can replace real tactile sensing; it offers a shared setting for algorithm development while tactile hardware and simulation models are still evolving.

0.55

Real-Time Force Regulation for Whole-Hand Dexterous Grasping

cs.RO eess.SY ·2026-09-24 ·Sang Min Kim, Alexander Alexiev, Tzu-Yuan Lin, Sangbae Kim, Young Min Kim +1 more
code/data similarity 0.72
Abstract · 9 pages, 10 figures. Project page: https://sangminkim-99.github.io/reactive-grasp-whole-hand/

Robust dexterous grasping requires maintaining physical stability despite contacts interactively evolving across the entire hand. A precomputed force distribution can easily fail under object motion, modeling errors, or external disturbances. In this paper, we present a framework for real-time force regulation over dynamically changing whole-hand contacts. Our method geometrically estimates contacts across all hand links using a tracked object model and proprioception, without requiring tactile sensing at those contacts. It repeatedly recomputes the desired contact-force distribution subject to friction constraints, actuator limits, and an actuation-consistency constraint motivated by classical whole-limb force analysis. We integrate this force-regulation controller with reactive reaching, enabling the hand to acquire a grasp, maintain it under disturbances, and regrasp after losing the object. Simulation experiments without gravity demonstrate improved grasp retention over fixed-allocation and fingertip-only execution under controlled perturbations, while real-world experiments on a 27-DoF arm-hand system demonstrate grasp maintenance and recovery under human-applied disturbances as contacts evolve across the whole hand. Project page: https://sangminkim-99.github.io/reactive-grasp-whole-hand/

0.39