CS Paper Radar

Benchmarking Dexterity of Multifingered Robot Hands: A Review and Perspective

Anthony Shilati, Anunth Ramaswami, Luke Batteas, Sylvia Tan, Anthony Barcio, Sairam Umakanth, Preksha Rao, David McDougall, Landry Graves, Ahmet A. Ozkan, Yunsoo Yoon, Arushi Pradhan, Michael G. Henry, Rohan Kota, Damian Gonzalez, Gray C. Thomas, Gary K. Fedder, J. Edward Colgate, Kevin M. Lynch

cs.RO ·submitted 2026-09-04 16:02 UTC · v1
publishedsurveybenchmark

Abstract

Robot hands are a key interface between AI and the physical world, making advances in robotic dexterity essential to realizing the vision of physical AI. While impressive dexterity has been demonstrated with simple grippers, multifingered hands offer the potential for substantially greater versatility, precision, and adaptability in manipulation. In this review, we survey the state of the art in benchmarking the dexterity of multifingered robot hands. Recognizing dexterity as a complex and multifaceted concept, we present the perspective of the U.S. National Science Foundation HAND Engineering Research Center, with a particular focus on fine in-hand manipulation. We introduce a framework consisting of three benchmark levels that correspond to increasing system complexity, review representative benchmarks at each level, and propose new benchmarks and metrics to address limitations in the literature. More information can be found at https://hand-erc.github.io/benchmarking/.

Comment
To be published in the $Annual$ $Review$ $of$ $Control$, $Robotics$, $and$ $Autonomous$ $Systems$, Volume 10, 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Bench2Dex: Benchmarking Visuo-Tactile Bimanual Dexterous Manipulation Across Dexterous Hands

cs.RO cs.AIcs.CV ·2026-09-14 ·Zhenjie Yang, Yideng Zhang, Dongjie Zhang, Chenyu Jiang, Xianshuai Liu +19 more
benchmarkcode/datahighly cited similarity 0.76
Abstract · Technical Report. Project Page: https://bench2dex.github.io/

Tactile sensing provides contact information that can be difficult to infer from vision alone, but tactile hardware for dexterous hands has not converged to a common design. Dexterous hands differ in finger structure, contact surfaces, and sensor layouts, while simulated tactile signals still differ from measurements produced by physical sensors. These factors make it difficult to study visuo-tactile manipulation across diverse dexterous hands within a consistent experimental setting. We present Bench2Dex, a simulation benchmark for visuo-tactile bimanual manipulation across 12 dexterous hands. We adapt existing robot models with a shared simulated tactile interface that converts local contact geometry into image-like tactile observations. The interface provides a consistent observation format across different hand morphologies without attempting to reproduce the output of a specific physical tactile sensor. Bench2Dex includes 26 bimanual manipulation tasks that involve tool use, articulated-object interaction, and multi-stage manipulation, together with about 1.3K human-teleoperated demonstrations. The benchmark provides synchronized visual, tactile, proprioceptive, action, and object-state observations, together with executable task metrics. For robustness, we group seven perturbation types into invariance axis, where the correct action does not change, and equivariance axis, where the correct action changes together with the perturbation. We evaluate ACT, Diffusion Policy, pi0.5, and GR00T N1.5 on Bench2Dex and report their performance and failure modes. Bench2Dex is meant as a platform for studying visuo-tactile learning across dexterous hands. It does not assume that simulated tactile observations can replace real tactile sensing; it offers a shared setting for algorithm development while tactile hardware and simulation models are still evolving.

0.55

DexRemo: A Force-Sensing Hand Platform and Task Suite for Contact-Rich Removal Manipulation

cs.RO cs.LG ·2026-11-11 ·Liman Wang, Hanyang Zhong, Sun Zhaole, Wenting Cao, Babar Jamil +3 more
publishedbenchmark similarity 0.74
Abstract · Accepted for publication in IEEE Transactions on Robotics (T-RO), 2026. Project website: https://dexremo.github.io

Many manipulation tasks require separating adhered, embedded, contaminated, or mechanically constrained targets. We study this setting as removal manipulation, where progress depends on evolving contact states that are only partially observable from vision and kinematics. We introduce DexRemo, a three-finger robotic hand with high-force actuation, modular fingertips, and three-axis fingertip force sensing, together with a nine-scenario real-robot task suite spanning adhesive detachment, surface cleaning and self-cleaning, and occluded retrieval. To make multi-finger force observations easier to fuse, we express fingertip forces in a shared wrist-centered frame, giving force components consistent geometric meaning across fingers and time. Using an Action Chunking Transformer backbone, policies fuse multi-view vision, proprioception, fingertip pose, and force observations to predict closed-loop action chunks from demonstrations. Evaluation uses six core benchmark tasks for controlled fingertip-input and force-frame ablations, plus three extension scenarios for additional held-out coverage. Across these evaluations, the learned policies achieve consistent removal performance, and ablations show that wrist-frame forces, especially with fingertip pose, improve stability and generalization over local-frame force inputs and no-force baselines. Project website: https://dexremo.github.io

0.24

Relative Contact Velocity-Controlled Hand-Object Mechanism for Dexterous Tool Manipulation

cs.RO ·2026-09-22 ·Sunyu Wang, Jean Oh, Nancy S. Pollard
hot direction similarity 0.73
Abstract

This work investigates how to enable general multi-finger robotic hands to perform the complete tool manipulation process, which entails picking up a tool, loading it into a suitable pose, and then wielding it. Inspired by human tool manipulation and mechanical design principles, we model the hand and the tool as a unified hand-object mechanism (HOM) composed of sub-assemblies. Specifically, we define a HOM as consisting of the hand, the object, and the generalized contact frames, allowing the HOM's motions to be expressed with the same set of Cartesian-space relative contact velocities, irrespective of the hand's kinematics and geometry. Then, we define a HOM's sub-assemblies as relative contact velocity and contact force constraints between fingers. Building on these definitions, we developed a lightweight and physically interpretable motion planning and contact estimation framework using least squares and a complementary filter. We evaluated our framework in simulation by teleoperating five different robotic hands. The results show that our framework enabled all five hands to execute the complete tool manipulation process, achieving dexterous behaviors even from identical, simple reference trajectories. Furthermore, the results showcase our framework's adaptability to different hands, tools, and tasks, enabled by its kinematic and geometric foundation. Please visit website for videos: \href{https://sunyuw.github.io/hom-sim/}{https://sunyuw.github.io/hom-sim/}

0.33

HandsOn: A Large-Scale Simulation Benchmark for Generalizable Dexterous Manipulation

cs.RO ·2026-10-19 ·Tianwei Luo, Yiming He, Hongjin Wu, Ting Pan, Debin Ren +12 more
benchmark similarity 0.72
Abstract · 56 pages, including appendices

General-purpose manipulation requires reliable behavior across embodiments, objects, and task demands. We introduce HandsOn, a composable simulation platform and benchmark for cross-embodiment dexterous manipulation. It supports five robotic arms, six dexterous hands, and approximately 200 rigid, articulated, and deformable assets in randomized scenes. The benchmark pairs 18,000 curated human demonstrations with 66 human-verified tasks: Core-50 supports demonstration-based learning and execution tests, while Transfer-16 evaluates asset and relation transfer, skill composition, and deformable manipulation without target-task training demonstrations. Qualitative real-robot rollouts illustrate sim-to-real transfer. Across diffusion, vision-language-action, world-action, and prompted VLM-based methods, the best trained multi-task policy achieves 29.1% Core-50 success. Without benchmark finetuning, GPT-6 using move_eef for palm-and-finger control achieves 5.2% on Core-50 and 1.9% on Transfer-16 over 660 trials. Trained-policy stage diagnostics expose failures in contact establishment, action coordination, and maintaining achieved goals, with additional sequencing errors in composed tasks. HandsOn provides a shared basis for investigating manipulation generalization and the limits of reliable physical interaction.

0.51

Tactus: Tactile & Pose Sensing Glove for Natural Dexterity Data Collection

cs.RO cs.AIcs.ARcs.LG ·2026-10-29 ·Li Guan, Rachael Granberry, Sahar Aseeri, Sahar Rostami, Taylor Niehues +99 more
similarity 0.72
Abstract · 9 pages

Collecting naturalistic human manipulation demonstrations with accurate contact force and hand pose is essential for robot dexterous manipulation policy and foundational world model learning - yet no existing wearable platform provides both calibrated fingertip force sensing and occlusion-resilient hand tracking in a form factor that preserves natural manipulation behavior. We present Tactus, a textile-integrated sensing glove that co-optimizes three design pillars: (1) a thin, conformal 3D-knit form factor (1.5 mm fingertip stackup) designed to minimize interference with natural manipulation, (2) strategically placed capacitive tactile sensors at manipulation-relevant regions informed by empirical contact studies, and (3) IMU-fused pose tracking that maintains accuracy through the hand-object occlusions where manipulation data is most valuable. Tactus includes a documented calibration pipeline for cross-glove consistency and per-session calibration for subject-dependent correction. To enable objective comparison, we introduce standardized benchmarking protocols for tactile force regression and hand pose estimation, and apply them to Tactus and two commercially available tactile gloves - to our knowledge the first quantitative cross-platform evaluation of this kind. Tactus resolves a minimum detectable force of 0.59 N at 95% confidence, 1.6 - 2.7x lower than the commercial baselines, and with 0.87 cross-participant consistency, while our pose tracking sustains 11.0 mm fingertip keypoint relative error during manipulation, when occlusion is heaviest. We show that these combined signals support object property estimation, slip detection, and representative recording of hand-object interaction - yielding demonstration data with the fidelity required for contact-aware manipulation policies and world models.

0.21

BiDex-100: A Comprehensive Benchmark for Bimanual Dexterous Manipulation Across 100+ Simulation Tasks

cs.RO cs.CVcs.LG ·2026-10-18 ·Yong Wang, Kecheng Zheng, Xing Zhu, Chao Xu, Yujun Shen +1 more
benchmark similarity 0.72
Abstract

Bimanual manipulation with dexterous hands has attracted growing attention in research on robotic action models. However, few studies have developed benchmarks specifically tailored for dexterous manipulation, leaving the dexterous manipulation capabilities of existing models insufficiently characterized. In this paper, we present BiDex-100, a simulation benchmark for bimanual dexterous manipulation that combines broad task coverage, multi-dimensional evaluation, and high-DoF hand embodiments. Concretely, the benchmark comprises 106 tasks organized along five capability axes: generalization, instruction following, limited demonstrations, long horizon, and memory. Each task is paired with an out-of-domain variant featuring controlled visual and spatial changes, allowing systematic assessment of robustness. In addition, the benchmark supports two embodiments and provides 8,080 success-validated teleoperated demonstrations, totaling 6.25 million frames. We evaluate seven recent Vision-Language-Action models under a unified protocol, establishing baselines for capability-specific performance, robustness, and data efficiency. The website is available at https://robbyant-research.github.io/BiDex-100/.

0.52

HiFun: a Hierarchical Framework for Efficient Functional Dexterous Manipulation Learning

cs.RO ·2026-10-14 ·Linyi Huang, Guowei Huai, Weibin Liu, Shulong Jiang, Ping Tan +3 more
code/data similarity 0.71
Abstract

While multi-fingered dexterous robot hands have the potential to provide human-level dexterity, using them for functional manipulation remains difficult because task success depends on precise contact, coordinated arm-hand motion, and reactive recovery from execution errors. Precise contact depends on complex contact dynamics that are difficult to model accurately in simulation, motivating real-world learning. However, real-world demonstrations in the full arm-hand control space are costly and noisy because each trajectory must coordinate arm motion with high-DoF multi-finger contact. Small execution deviations can further cause slipped contact or premature force application, making recovery from off-nominal contact states important for robust execution. To deal with these challenges, we propose HiFun, a hierarchical real-world RL framework for functional dexterous manipulation tasks. Our key insight is to decouple the control complexity into a functional hand skill for precise contact execution and an arm-hand coordination policy for arm control and hand-skill activation. This design enables effective real-time human intervention for reactive recovery learning and efficient data collection with Dynamic Movement Primitive (DMP) augmentation. Across six real-world tasks on two dexterous hands, HiFun achieves 98.3% average success within one hour of online training and remains robust to dynamic disturbances. The project page is available at https://hly-123.github.io/HiFun/.

0.23

DexSuite: An All-in-One Framework for Dexterous Manipulation Across Arms, Hands, and Tasks

cs.RO ·2026-10-27 ·Anas Houssaini, Hugo He, Junming Shi, Amin Abyaneh, Ricardo Chahine +17 more
benchmarkcode/data similarity 0.71
Abstract · 7 pages, 7 figures, 2 tables. Project page: https://dexsuiteorg.github.io

Human-level dexterity remains a central open problem in robotics, yet few simulation frameworks cover the full workflow of dexterous manipulation, from setting up a robot to collecting dexterous demonstrations and evaluating policies. We present DexSuite, an all-in-one simulation framework for dexterous manipulation built on the Genesis simulator. DexSuite provides 30 tasks and assembles its 10 arms and 12 end-effectors, from parallel-jaw grippers to dexterous hands, into more than 100 single-arm robots and thousands of bimanual pairs. It also ships a standardized environment API, integrated teleoperation, and simulated tactile sensing. Moreover, we define a benchmark of 16 task-embodiment pairs spanning diverse contact complexities and horizons, and release a dataset of 4,700 successful episodes in simulation from human teleoperation, scripted experts, and learned policies. We release DexSuite as open source and hope others will build on it. Videos and datasets are available at https://dexsuiteorg.github.io

0.27