CS Paper Radar

HarvestPoint-ACT: Explicit Target Selection and Harvest-Point Conditioning for Robotic Fruit Harvesting under Occlusion

Hanying Hu, Weipeng Li, Yikun Huang, Hao Chen, Zhengtao Hu, Changcai Yang, Weiwei Wan

cs.RO ·submitted 2026-08-19 02:21 UTC · v1

Abstract

End-to-end imitation learning avoids hand-made robot motion for approaching and grasping, but the policy must still decide which fruit to pick and where to close the gripper. Occlusion can make the policy lose the selected fruit during harvesting, and the correct closing point is difficult to infer from pixels alone. This paper presents HarvestPoint-ACT, which makes both decisions explicit in perception and provides them to the policy. An instance segmentation front end with a keypoint branch predicts a mask and a harvest point for each visible fruit, where the harvest point specifies the location to close the gripper. A scheduler ranks detected candidates by occlusion and travel distance and selects one target. After each attempt, it redetects and reranks the candidates because the canopy may have changed. The selected fruit is encoded for an action chunking transformer as an eight-dimensional state, containing the absolute harvest point, the vector from the gripper to that point, a validity flag, and a confidence score. When the selected fruit is temporarily undetected, the system retains the last harvest point estimate in the robot base frame and marks it as stale, and aborts the attempt if the loss persists. On a canopy mock-up, HarvestPoint-ACT achieves a success rate of 88%, and of 75% under heavy occlusion.

Comment
Submit to IEEE ROBIO 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Pedicel-Targeted Strawberry Harvesting via Imitation Learning on a Low-Cost Teleoperated Robotic Arm

cs.RO ·2026-10-16 ·Nitin Rai, Won Suk Lee, Hongyoung Leon, Heping Zhu
publishedcode/data similarity 0.74
Abstract · 4 pages, 3 figures. This paper was peer-reviewed and accepted in the IEEE/RSJ International Conference on Intelligent Robots and Systems (IR…

Precise pedicel-targeted grasping in strawberry harvesting remains a critical bottleneck due to the pedicel's small diameter (1.3-3 mm), color similarity with surrounding foliage, and precise force control required for clean abscission zone detachment. As a market-grade crop, strawberry aesthetic value makes bruise-free pedicel detachment essential over direct fruit grasping. Classical approaches struggle to unify vision models, motion planning, and contact manipulation into a robust framework, particularly in occluded canopy environments. Therefore, this work presents a visuomotor imitation learning pipeline for pedicel-targeted strawberry harvesting that unifies perception, motion planning, and contact manipulation from collecting human teleoperation demonstrations, training an Action Chunking with Transformers (ACT) policy with a ResNet-50 visual backbone, and deploying the learned policy autonomously on a Jetson AGX Orin edge platform at 15 Hz. The trained policy achieved consistent loss convergence from 2.84 to 0.091 over 100K gradient steps on 130 demonstrations. We have also established a reproducible open-source pipeline with publicly released dataset and model weights for the agricultural robotics community. Full dataset is available at, https://huggingface.co/datasets/nitindominicrai/strawberry_pedicel_grasp_teleoperation and trained policy at, https://huggingface.co/nitindominicrai/act_strawberry_pedicel. To replicate this work, all code, configurations, and deployment instructions are publicly available at, https://github.com/nitin-dominic/autonomous_strawberry_pedicel_harvesting.

0.36

Visuomotor Robotic Pruning in Planar Orchards Using Hybrid Reinforcement Learning

cs.RO cs.AI ·2026-09-21 ·Abhinav Jain, Cindy Grimm, Stefan Lee
top venue similarity 0.70
Abstract · for associated video file, see https://www.youtube.com/watch?v=AjlBe6A0xdo&t

Dormant tree pruning is labor-intensive yet essential for maintaining modern high-productivity fruit orchards. In this work, we focus on pruning of modern planar tree training systems - V-Trellis apples and UFO cherries - where trunks and primary branches are trained into approximately planar walls. We introduce an end-to-end pipeline to learn a closed-loop visuomotor controller for robotic pruning. This controller is trained entirely using simulation and synthetically generated data and deployed in real orchards in a zero-shot manner. The pipeline comprises synthetic generation of planar orchard tree meshes, construction of a physics-based orchard simulator, automated collection of successful pruning trajectories via motion planning, and policy learning with a novel hybrid reinforcement-learning algorithm that combines offline demonstrations with online simulated rollouts. The controller uses optical-flow inputs from a wrist-mounted camera - avoiding the need for full 3D-reconstruction - and continuously guides the cutter through cluttered branch environments to a specified cutpoint with correct tool orientation. In exhaustive simulated task-space evaluations over 3,000 pruning points, the policy attains 49.9% success on V-Trellis apples and 46.0% on UFO cherries. We validate the learned controller across 38 physical trials - comprising 28 outdoor field trials in commercial and experimental orchards and 10 indoor laboratory tests - demonstrating zero-shot sim-to-real transfer. The learned policy also outperforms a classical RRT-Connect baseline on physical hardware in laboratory trials.

0.51

Active perception for robotic harvesting: 3D reconstruction and localisation of tomatoes hidden within clusters in a Mediterranean greenhouse

cs.RO ·2026-09-16 ·Fernando Cañadas-Aránega, Rowan Border, José C. Moreno, José L. Blanco-Claraco
similarity 0.67
Abstract

Automating robotic harvesting in intensive agriculture within Mediterranean greenhouses requires overcoming significant challenges related to the geometric complexity of plants and occluded fruits. Although existing literature offers solutions targeting crops that grow in isolation (e.g., apples, sweet peppers, or peaches), the fundamental challenge lies in cluster-growing vegetables, where fixed sensors mounted on robotic systems fail to detect fruits hidden behind the visible surface. To address this limitation, this study presents a comprehensive pipeline for the 3D reconstruction and precise localization of each fruit within a cluster, including heavily occluded instances. The proposed methodology is structured into five sequential stages: i) point cloud acquisition using the AgriSEE Next Best View (NBV) active planner; ii) stochastic noise filtering via Statistical Outlier Removal (SOR); iii) surface classification and segmentation using Region Growing (RG); iv) isolation and recovery of occluded fruits through Density-Based Spatial Clustering of Applications with Noise (DBSCAN); and v) 3D pose estimation (position and orientation). This approach extracts the complete cluster geometry, ensuring the reliable identification of partially hidden tomatoes. Evaluated across multiple scenarios with varying occlusion levels within a simulation framework rigorously validated against real-world conditions, the system achieves a precision exceeding 90\%, an average recall of 82.8\%, and a mean Intersection over Union (mIoU) of 80.7\%. Furthermore, it demonstrates high repeatability in centroid estimation with a Root Mean Square Error (RMSE) of merely 4.2~mm, verifying its technical feasibility and high accuracy for autonomous harvesting operations.

0.15

CLASP: A Cluster-Level Autonomous Selective Picking Robot with a Soft Rolling-Band Gripper for Fresh-Market Blueberry Harvesting

cs.RO ·2026-09-16 ·Yixuan Xia, Yilin Cai, Natalia Belen Espinoza, Changying Li, Zilfina Rubio Ames +2 more
similarity 0.67
Abstract

Fresh-market blueberries require selective, gentle picking, which is labor-intensive and expensive. Over-the-row machine harvesters are fast but non-selective, bruising mixed-ripeness fruit and limiting yield to the processing market. Selective robotic harvesters typically target individual fruits rather than fruit clusters, which limits harvesting efficiency for small, densely clustered blueberries. This paper presents CLASP, a Cluster-Level Autonomous Selective Picking robot with a Soft Active Rolling-Band Gripper (SARB-Gripper). Two compliant bands envelop the cluster and roll against the fruit, drawing mature berries off in sequence, while closed-loop regulation of the pulling force keeps the applied load below the immature detachment threshold. A global-to-local perception pipeline pairs an eye-to-hand camera for global cluster detection and target selection with an eye-in-hand camera for local localization and cluster orientation estimation. Field measurements confirm a clear detachment-force separation between mature and immature fruit, and the SARB-Gripper reproduces a commanded pulling force to within \SI{3.7}{\percent}, enabling selective harvesting at the cluster level. In end-to-end field trials, CLASP autonomously grasped 23 of 25 presented clusters (\SI{92}{\percent}). With the component cost of approximately \$3326 per unit, CLASP offers a scalable approach to selective cluster-level harvesting for fresh-market blueberries.

0.19

Do Not Cut When Uncertain: Rejectable and Calibrated Decision Heads for VLA Policies in Robotic Harvesting

cs.RO ·2026-09-28 ·Heng Zhang
position similarity 0.65
Abstract

Vision-Language-Action (VLA) policies trained with behavior cloning or flow matching are optimized to output an action trajectory, but they cannot express "I don't know" or "I should not act." In robotic harvesting, occlusion makes single-frame decisions fundamentally ambiguous: identical pixels can correspond either to a cuttable stem or to no stem at all. Existing VLAs are forced to commit, leading to high-confidence errors with irreversible consequences. We argue that the failure mode of a VLA is determined not by backbone scale but by its output interface. We propose Rejectable and Calibrated Decision Heads (RCDH), a typed, rejectable, and calibrated output interface that can be attached to a frozen VLA backbone without retraining or new features. RCDH introduces (i) a decision schema with explicit rejection and ordered, conditional decomposition, and (ii) a calibration procedure for risk-aware abstention. We evaluate RCDH on a robotic harvesting platform with controllable leaf occlusion, comparing generative, enumerated, calibrated, and rejectable interfaces. We show that replacing only the output head restores out-of-distribution usability under occlusion while preserving in-distribution performance. We further test whether the ordering of the rejection space is critical. Our results suggest that the right to refuse, rather than a larger model, is the missing interface for reliable manipulation under uncertainty.

0.45

From Vision to Harvest: Benchmarking Vision-Language Models for Multi-Arm Robotic Fruit Harvesting

cs.RO cs.CV ·2026-09-11 ·Vrishan Inukollu, Adyan Zaman, Anvi Kudaraya, Carlos Lazcano, Yuankai Zhu +2 more
benchmark similarity 0.65
Abstract

Multi-arm robotic harvesting offers a promising path to improve harvesting efficiency and reduce reliance on manual labor. However, practical deployment remains challenging because the system must generalize across diverse environments while efficiently coordinating multiple arms in a shared workspace. Existing methods often require substantial data collection in target environments or rely on simplifying assumptions that limit planning quality. In this work, we introduce the first comprehensive benchmark for evaluating pretrained Vision-Language Models (VLMs) on zero-shot multi-arm fruit harvesting planning. Our benchmark uses real-world apple and citrus orchard images and compares a VLM-based planning pipeline with a traditional perception-and-planning pipeline. The VLM pipeline directly generates harvesting sequences and waypoints for each arm, while a lightweight trajectory verifier checks for collisions. Our results show that frontier VLMs can generate effective multi-arm harvesting plans zero-shot, but a practical deployment remains limited by accurate 3D waypoint generation and collision-aware coordination. These results highlight both the promise and current limitations of pretrained VLMs for multi-arm robotic harvesting.

0.28

Robot Learning with Vision-Language-Action Models for Agricultural Manipulation

cs.RO ·2026-10-19 ·Hamid Hafezi, Javad Mohammadpour Velni, Mohammadreza Davoodi
similarity 0.64
Abstract

Robotic manipulation in agricultural environments remains challenging due to variations in plant geometry, occlusion, and camera viewpoints. Pretrained vision-language-action (VLA) and generalist robot policies offer a promising approach to addressing these challenges by learning manipulation behaviors from multimodal observations and language instructions. However, adapting these policies to agricultural tasks requires domain-specific demonstrations, which are costly and time-consuming to collect on physical robots. In this work, we develop a simulation-to-real robot-learning framework for agricultural reaching and grasping that integrates task-specific demonstration collection and pretrained policy adaptation. A MuJoCo-based agricultural environment is developed with diverse tomato plant structures to support demonstration collection and controlled evaluation. Expert demonstrations are collected through joystick teleoperation, with a low-level controller used to execute robot actions. Two pretrained generalist robot policies, Octo and $π_{0.5}$, are adapted using simulated demonstrations, followed by further fine-tuning on a physical Franka Research 3 manipulator using real-robot demonstrations. The adapted policies are evaluated under in-distribution, viewpoint/spatial-shift, and out-of-distribution conditions in simulation, followed by physical-robot experiments. The influence of proprioceptive information on policy performance is also investigated. Results show that $π_{0.5}$ achieves higher task-performance scores than Octo and exhibits less degradation under distribution shifts. These findings demonstrate the potential of integrating pretrained generalist policies with task-specific demonstration learning for agricultural manipulation.

0.08

An Ordering Optimization for Fruit-Vegetable in High-Density Environment based on Genetic Algorithm

cs.RO eess.SY ·2026-11-05 ·Jaehwi Seol, Jeonghyeon Pak, Hyoung Il Son
similarity 0.62
Abstract · 39 pages, 11 figures

This paper presents a robotic harvesting method that combines RGB-D fruit localization, GA-based harvest ordering, and waypoint-based robot motion in dense and unstructured crop environments. The global RGB-D camera provides 3D fruit positions for ordering, while the end-effector-mounted camera provides close-range observation during execution. The GA determines the harvesting sequence, and static or dynamic waypoints define the intermediate robot motion. The method was evaluated in a controlled laboratory testbed and in four-, five-, and six-fruit field conditions. GA solutions were compared with exhaustive enumeration, and both waypoint offsets were examined by parameter sensitivity analysis. Continuous execution reduced unnecessary Home-return motion, while the dynamic waypoint changed with the remaining fruit distribution without changing the GA sequence. In the field evaluation, the dynamic-waypoint continuous strategy produced 40 collision events and a 70.7% target-approach success rate, compared with 55 collision events and 65.3% for the static-waypoint continuous strategy.

0.28