CS Paper Radar

From Sky to Soil: A Morphing Aerial-Ground Robot for Seed Deployment

Namai Chandra, Lining Yao

cs.RO ·submitted 2026-09-29 09:08 UTC · v1

Abstract

Aerial seed broadcasting can reach remote restoration sites, but provides limited control over seed placement within the soil. This paper presents a geometry-assisted, tri-functional morphing robot that combines aerial access, ground locomotion, and controlled-depth seed embedding in a fly-drive-plant architecture. After landing, the platform reconfigures into a four-wheeled planting configuration: an electronically coupled dual-motor drive folds the rear arms outward to form ground wheels, while a descending front tray engages the propulsion motors with a drill gear train. Reusing the propulsion motors for drilling eliminates a dedicated drill drive. The planting sequence forms a hole, dispenses a seed, and allows the vehicle to reposition on the ground or return to its flight configuration. Ground mobility supports repeated planting without requiring a separate flight between adjacent sites. A companion controller issues reconfiguration, tray, and seed-gate commands, while a dedicated autopilot handles flight control. The morphing and planting mechanisms are validated using a hardware prototype that demonstrates ground repositioning and seed embedding. This proof of concept establishes a hardware basis for aerial-ground seed embedding through coordinated reconfiguration and actuator reuse.

Comment
9 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Fly, Drive, Reconfigure: A Modular Reconfigurable Aerial-Ground Platform for Field Operations

cs.RO eess.SY ·2026-09-24 ·Li-Yu Lo, Yanbaihui Liu, Chengchuan Shu, Tyler Harris, Jonathan Ryan +1 more
similarity 0.64
Abstract

Heterogeneous robot teams distribute complementary capabilities across specialized agents, but their physical roles and capacities typically remain fixed throughout a mission. We present HARP, a Heterogeneous Aerial Robotic modules Platform in which independently deployable aerial robots physically reconfigure to compose their capabilities for field operations. HARP comprises sensor-equipped scouts, flydrive rover modules, and task-specific payload modules. Scouts map the environment and inform an energy-aware planner that jointly selects routes and air-ground mobility modes. Rover and payload modules fly independently across terrain that constrains ground travel, then autonomously assemble into a cooperative ground vehicle for energy-efficient payload transport. Motivated by environmental sampling in remote and difficult-to-traverse regions, we evaluate HARP through field experiments spanning sensing, planning, reconfiguration, airground mobility, payload transport, and task execution. We further conduct module-level deployment tests on the Greenland Ice Sheet toward future autonomous missions. HARP demonstrates how heterogeneous robot teams can adapt not only their actions, but also how their physical capabilities are composed during a mission.

0.15

Mechanical Precision Weeding with a Quadruped Robot

cs.RO ·2026-09-17 ·Ruben Beumer, Tom Janssen, René van de Molengraft, Duarte Antunes
similarity 0.60
Abstract

Herbicide-based weed control is increasingly unsustainable due to rising weed resistance and the adverse environmental impacts of chemical use. While mechanical weed control avoids these drawbacks, it is typically implemented using large machines that cause soil compaction. We propose a novel alternative based on small mobile robots for mechanical weeding. Compared with existing automated mechanical weeding approaches, the proposed method offers reduced soil compaction, simpler automation, and improved scalability. Our solution involves a Boston Dynamics Spot quadruped robot equipped with a custom weed removal tool featuring a milling bit at its end. The tool is rigidly attached to the robot and uses the degrees of freedom of the robot base by actuating the legs, while keeping the feet stationary. We develop a software architecture that enables autonomous weed removal and integrate this system with all other required components. We analyze the accuracy and efficiency of the current proof of concept both in an indoor and outdoor environment and provide recommendations for future work to make the system more accurate and efficient.

0.22

Agibot: An Open-Source Modular Swerve-Drive Robot Platform for Agricultural Robotics Research and Education

cs.RO cs.LGeess.SY ·2026-11-06 ·Moeen Ul Islam, Bishal Adhikari, Kori Edwards, Lorien Harvey, J. Alex Thomasson +1 more
code/data similarity 0.59
Abstract · 14 pages. Submitted to IEEE Transactions on AgriFood Electronics (TAFE)

Agricultural production faces persistent labor shortages and increasing demand for automation, yet progress in agricultural robotics remains constrained by the limited availability of affordable, flexible, and accessible research platforms. This paper presents Agibot, an open-source, modular, low-cost agricultural robotics platform designed for autonomy research and experimentation, with potential applications in hands-on robotics education. The platform integrates four-wheel independent swerve drive, swappable computing, distributed embedded control, multimodal sensing, and configurable manipulation within a unified sense-plan-act-verify framework supporting perception, control, navigation, manipulation, and autonomous task verification. The platform was evaluated through representative row-crop navigation and manipulation tasks under varying lighting and soil conditions. Experiments demonstrated reliable lane following, autonomous row-to-row navigation, target identification, seed dispensing, plant manipulation, and closed-loop verification of task success. Its modular architecture supports independent testing, modification, and validation of autonomy components for rapid prototyping and experimentation. These proof-of-concept tasks, controller-tuning studies, and integrated trials demonstrate the platform's research capabilities, while its accessible and reconfigurable design supports its use for hands-on robotics education. By combining affordability, modularity, open-source accessibility, configurable manipulation, and end-to-end sense-plan-act-verify autonomy, Agibot provides a practical platform for agricultural robotics research, technology development, and workforce training.

0.34

A Two-Wheeled Quadrotor with All-Clockwise Tilted Rotors for Level-Attitude Surface Locomotnion

cs.RO eess.SY ·2026-10-29 ·Takumi Ito, Satoshi Nakano
similarity 0.57
Abstract

Conventional wheel-equipped quadrotor UAVs must tilt their bodies to generate lateral forces, limiting their ability to maintain a desired attitude during lateral motion. This paper proposes a wheeled quadrotor with all-clockwise tilted rotors that uses surface contact as a constraint to generate propulsion along the contact surface without tilting the vehicle. We analyze feasible forces and system controllability under surface contact and optimize the vehicle design considering different rotor-spin configurations. The optimization results show that a configuration in which all four rotors spin clockwise can generate a larger tangential force than the conventional alternating-spin configuration. This approach enables both aerial and contact-based locomotion without additional rotor-tilting actuators or mechanisms. Simulation results demonstrate both hovering in free space and horizontal locomotion on a floor while maintaining a level attitude.

0.21

SwarmNxt: Open-source Software-Hardware Platform for Fast and Agile Aerial Swarms

cs.RO ·2026-09-10 ·Charbel Toumieh, Niel Mistry, Benjamin Jarvis, Simon Jeger, Peize Liu +2 more
code/data similarity 0.55
Abstract

Aerial robot swarms have the potential to transform time-critical safety, security, and search-and-rescue operations. By coordinating multiple robots, they can rapidly survey disaster sites, map collapsed or GPS-denied environments, and search cluttered areas faster than a single robot, reducing response times and minimizing risks to first responders. Realizing this potential, however, requires robust autonomous swarm navigation, which remains an active research challenge. Progress is further constrained by existing platforms, as commercial drones are often closed-source or lack the onboard computational resources needed for agile, vision-based collective flight. Moreover, developing, deploying, and maintaining software across multiple aerial robots requires significant engineering effort. To address these challenges, we present SwarmNxt, an open-source software platform built on the open-source OmniNxt drone hardware. SwarmNxt provides an end-to-end toolkit, including detailed hardware assembly instructions with a video tutorial, automation tools for parallel software deployment and swarm-wide updates, and a ROS 2-based framework for autonomous navigation. The platform integrates state-of-the-art control, planning, and depth estimation into a single ROS 2 multi-agent system, providing an open research infrastructure for physical swarm experimentation. We validate SwarmNxt through two real-world experiments: a six-drone swarm performing decentralized planning with high-speed inter-drone collision avoidance, and a four-drone swarm executing collective flight with onboard depth estimation in an obstacle-filled environment. Both experiments were run indoors with global position from external motion capture; perception, planning, and control run onboard.

0.33

Agri-Sim: Agricultural Simulation Platform for Embodied Intelligence Evaluation in Greenhouse Robotics

cs.RO ·2026-08-29 ·Shuhan Shi, Zhenfeng Xue, Minghao Mei, Chao Zheng, Nan Li +1 more
similarity 0.54
Abstract · 13 pages, 9 figures, and 5 tables

Agricultural-robot development requires simulation environments that can jointly support realistic scene construction, virtual sensing, autonomous navigation, motion planning, and manipulation-task execution. This paper presents Agri-Sim, a Unity and ROS2-based simulation platform for the closed-loop development and functional evaluation of agricultural robots. The platform contains a configurable tomato-greenhouse environment, a mobile dual-arm harvesting robot, virtual RGB-D, LiDAR, IMU, and joint sensors, and a bidirectional communication interface between Unity and ROS2. Unity is responsible for scene rendering, rigid-body dynamics, collision detection, virtual sensing, and task-state execution, whereas ROS2 and MoveIt 2 provide localization, navigation, collision-aware motion planning, inverse kinematics, and trajectory generation. Autonomous greenhouse navigation and dual-arm tomato harvesting were used to evaluate the complete simulation workflow. The experiments covered virtual sensor publication, ROS2-based navigation, collision-aware motion planning, mobile-base control, tomato acquisition, inter-arm handover, and box placement. The results demonstrate that Agri-Sim supports closed-loop integration and repeatable functional evaluation of navigation and manipulation workflows in a controlled virtual greenhouse, providing a practical foundation for subsequent algorithm development and Sim-to-Real studies.

0.32

Vision-Guided Morphing Quadcopter for Multi-Geometry Payload Transport through Narrow Passages

cs.RO ·2026-08-22 ·Aashish Sahu, Shriram Hari, R. Prasanth Kumar
similarity 0.53
Abstract

Aerial payload transport using multirotor unmanned aerial vehicles is challenging because payload geometry, contact interaction, grasp stability, flight control, and narrow-passage traversal are strongly coupled during pickup and transport. Object-specific grippers often cannot adapt their footprint or grasp geometry when the payload shape or passage width changes. This paper presents a vision-guided morphing quadcopter for multi-geometry payload transport through narrow passages. The proposed platform uses four hybrid arm-leg structures that function as both landing supports and grasping members. A centrally placed actuator drives a tendon-based morphing mechanism, enabling all four arms to synchronously retract or expand for object grasping, footprint reduction, and post-transport release. Onboard vision estimates the payload geometry and passage width, while endpoint force feedback is used to confirm grasp contact during payload engagement. A phase-wise mission planner, PID-based flight stabilization, and morphology-adaptive grasp controller are implemented in a MuJoCo simulation environment. The framework is evaluated using box, cylindrical, and spherical payloads, representing flat-faced, rolling-curved, and fully curved contact conditions. Across the three cases, the simulated system completes the pickup-transport-release sequence with a maximum RMS position error of 0.31 m, a final drop-zone error below 0.18 m, a compact grasp footprint of 0.09-0.21 m2, and a footprint reduction of 75.0-89.7 percent. The results demonstrate that a single-actuator morphing quadcopter can adapt its grasp footprint for the transport of payloads with different geometries while reducing its overall footprint for narrow-passage traversal.

0.20

Robot-Assisted Deployment and Maintenance of Inflatable Modules for Lunar Habitation: A Field Demonstration

cs.RO ·2026-09-28 ·Kentaro Uno, Shamistan Karimov, Ashutosh Mishra, Elian Neppel, Hazal Gozbasi +3 more
published similarity 0.52
Abstract · Author's version of a manuscript accepted at the International Conference on Space Robotics 2026 (iSpaRo 2026). (c) IEEE

Long-term human habitation and in-situ development on the Moon open a new era of space utilization. In this context, robots are a key technology for facilitating the construction of future human outposts. Toward the deployment and establishment of human habitation modules on the lunar surface, we propose a combined system consisting of inflatable modules and a modular, reconfigurable robotic system. This paper presents a report demonstrating various robot-assisted task executions using real hardware, namely the modular and reconfigurable robot MoonBot and the inflatable module HIDAS, to enhance the reliability of their deployment and maintenance. The demonstrated tasks include robotic inspection during inflation, module position alignment, final safety locking, and three-dimensional mapping for post-deployment maintenance. All demonstrations were conducted either in a laboratory environment or at a lunar analogue test site. Finally, lessons learned are discussed to provide essential insights for this robotic application to future lunar habitation.

0.34