CS Paper Radar

Mudskippers use tail thrusting to help crutching to move on mud of various wetness

Divya Ramesh, Gargi Sadalgekar, Jiangqi Tan, Chen Li

cs.RO physics.bio-phcond-mat.softeess.SYq-bio.QM ·submitted 2026-09-01 01:57 UTC · v1

Abstract

At the water-land interface, amphibious fishes encounter wet flowable substrates made of granular solid-water mixtures, which can stay solid or flow like a fluid. As these substrates become wetter or drier, their yield strength (at which solid-fluid transition occurs) and cohesion (how sticky they are) both change, challenging locomotion. Despite substantial understanding of tetrapod locomotion on flowable substrates (mostly dry sand), we know little about how amphibious fishes cope with wet flowable substrates of various wetness. Here, we studied mudskippers on clay mud of controlled, variable wetness over the range where solid-fluid transition occurs. As mud became wetter, its strength decreased by 100-fold, leading the animal to sink deeper, with larger areas of body and fins contacting mud. By contrast, mud stuck most easily at intermediate wetness. The increased sinkage and contact and stickiness change caused more mud to stick to and pull against the animal on wetter mud. We also tested dry mud, which stuck to animal fins as its mucus dried. Despite these challenges, the mudskipper predominately used a conserved crutching gait on all except the wettest mud tested, with a modest performance reduction. When normal crutching became less effective, the animal assisted it with tail thrusting, by bending and straightening it to push downward and backward to generate additional thrust and lift, or even thrusting the tail to jump. These observations suggest that mudskipper's crutching motor program is well adapted to its native muddy substrates but inflexible, with most novelty in tail use.

Comment
Journal of Experimental Biology, in review

Closest papers

Nearest neighbours by meaning across the whole index.

Importance and methods to control, vary, and characterize mud strength for studying locomotion

cs.RO physics.bio-phcond-mat.softeess.SY+1 ·2026-09-01 ·Divya Ramesh, Gargi Sadalgekar, Qiyuan Fu, Zachary Souders, Jack Rao +1 more
publishedunusual similarity 0.79
Abstract · Journal of Experimental Biology, in review

Animals and robots encounter mud at the water-land interface. Like sand, mud can stay solid or flow like a fluid. Unlike sand, the yield strength of mud at which solid-fluid transitions occur depends on not only the amount of solid relative to fluid (water in mud, air in dry sand), but also how much coarse grains and fine clay are within the solid. Despite understanding of locomotion on/within dry sand dominated by coarse grains with repulsive normal forces and friction, little is known for mud dominated by fine clay with strong cohesion. Here, we developed methods to prepare uniform mud of controlled, variable yield strength and characterize and track its drift from water evaporation. Compared to other flowable substrates, mud strength measured by upward force during penetration is weaker and can vary more, and mud sticks more during extraction to pull downward, making it more challenging for locomotion.

0.46

Undulatory Swimming in Sand: Subsurface Locomotion of the Sandfish Lizard

eess.SY physics.bio-phcond-mat.softphysics.flu-dyn+1 ·2026-10-18 ·Ryan D. Maladen, Yang Ding, Chen Li, Daniel I. Goldman
published similarity 0.64
Abstract

The desert-dwelling sandfish (Scincus scincus) moves within dry sand, a material that displays solid and fluidlike behavior. High-speed x-ray imaging shows that below the surface, the lizard no longer uses limbs for propulsion but generates thrust to overcome drag by propagating an undulatory traveling wave down the body. Although viscous hydrodynamics can predict swimming speed in fluids such as water, an equivalent theory for granular drag is not available. To predict sandfish swimming speed, we developed an empirical model by measuring granular drag force on a small cylinder oriented at different angles relative to the displacement direction and summing these forces over the animal movement profile. The agreement between model and experiment implies that the noninertial swimming occurs in a frictional fluid.

0.32

Omnidirectional Amphibious Locomotion via Internal Mass Actuation

cs.RO ·2026-09-23 ·Niko Weaver, Boxi Xia, Li-Yu Lo, Yuhao Huang, Boyuan Chen
code/data similarity 0.54
Abstract

Field robots must traverse varied terrain and obstacles while remaining robust to water, debris, vegetation, and physical contact. We present MARBLE, a fully enclosed omnidirectional amphibious rolling robot driven entirely by internal mass redistribution. Three mutually orthogonal linear sliders shift internal masses to generate body rotation, while an orientation-aware controller maps planar velocity commands into slider positions. A rigid spherical shell encloses all active mechanisms and simultaneously serves as the terrestrial contact surface, buoyant enclosure, and mounting structure for passive fins that enable water-surface propulsion. Rotation of the same shell architecture hence produces rolling on land and surface propulsion in water without mechanical reconfiguration or separate locomotion actuators. The spherical morphology further allows the robot to accommodate changes in body orientation and contact location during direct interactions with terrain and obstacles. We evaluate MARBLE through omnidirectional locomotion characterization, traversal across heterogeneous terrestrial environments, aquatic surface locomotion, land-water transitions, and deliberate obstacle interactions. These experiments demonstrate how a single enclosed mechanical architecture can combine omnidirectional mobility, cross-medium locomotion, and tolerance to environmental contact. MARBLE provides a compact design for field mobility across heterogeneous terrain, obstacles, and land-water transitions. We will open-source all software and hardware design. Our website is https://generalroboticslab.com/MARBLE

0.44

Water Surface Swimming in a Centipede and its Robophysical Model

cs.RO physics.bio-ph ·2026-09-22 ·Zhaochen J. Xu, Delfin Aydin, Abdullah Mustafa, Margarita B. Levin, Jianfeng Lin +2 more
similarity 0.53
Abstract

Elongate multi-legged robots use coordinated body waves and distributed legs to move through cluttered terrestrial environments. However, as housing actuators for independent leg control can require bulky body segments, their non-streamlined body and limb structure makes it difficult to achieve swimming capability comparable to their terrestrial locomotor performance. At the water surface, we found that the multi-legged robots we tested unexpectedly moved backward: their body waves traveled in the same direction as their displacement, i.e., swimming with a direct wave. We found similar behavior in the centipede \textit{Lithobius forficatus}, which swims with a direct body wave and periodic leg movement. To study how distributed legs contribute to direct-wave swimming, we analyze animal kinematics and develop a multi-legged robophysical model that allows independent variation of leg morphology and stiffness, body-wave direction, and leg coordination. Robophysical experiments show that direct body waves produce consistent forward motion under the tested conditions and that swimming performance depends on body--leg coordination. Additionally, directionally compliant legs increase displacement from approximately 0.08 to 0.21 body lengths per cycle relative to rigid legs under matched anti-phase actuation. These findings clarify how distributed appendages contribute to surface swimming and establish gait and morphology design principles for extending multi-legged field robots from terrestrial locomotion into aquatic environments.

0.24

MOSS: Multimodal Origami Swamp Robot System

cs.RO ·2026-10-16 ·Tian Lan, Atar Babgei, Luca Romanello, Mirko Kovac, Sophie F. Armanini
similarity 0.51
Abstract · 8 pages, 8 figures, submitted to ICRA 2027

Robotic systems for environmental monitoring and ecological surveying in wetlands and swamps must operate across diverse terrestrial and aquatic conditions. Conventional fixed-geometry wheels cannot adapt their contact geometry to these varying conditions. This work presents MOSS (Multimodal Origami Swamp Robot System), a compact amphibious robotic platform with 3D-printed origami wheels. The compact crank mechanism switches the wheel between contracted and expanded configurations, changing its width, body diameter, and fin orientation simultaneously. The contracted configuration is better suited to efficient rolling on firmer ground, whereas the expanded configuration provides greater contact and terrain engagement on softer surfaces. MOSS was evaluated on soil, sand, mud with varying water content, and water, in addition to in-motion morphing and terrestrial-aquatic transition tests. The more energy-efficient wheel configuration depended on terrain. The contracted configuration achieved a lower cost of transport on firmer soil and mud, whereas the expanded configuration performed better on wetter mud, sand, and water, reducing the cost of transport by up to 29%. Expanded wheels also reduced slip in wet mud and reduced both slip and hub sinkage in sand. MOSS successfully completed configuration changes in $1.95 \pm 0.11$ s and demonstrated continuous locomotion across soil-mud-water transitions. Outdoor trials further demonstrated operation across natural deformable terrain and water. These results show that adaptive wheel geometry provides terrain-dependent locomotion benefits and enables a single compact platform to traverse substantially different terrestrial and aquatic conditions.

0.25

Terrain-Dependent Intra-Cycle Leg Timing for Effective Locomotion on Granular Slopes

cs.RO ·2026-10-02 ·Long Zhao, Xingjue Liao, Feifei Qian
similarity 0.49
Abstract

Locomotion on granular slopes such as sand dunes remains a fundamental challenge for legged robots due to reduced shear strength and gravity-induced anisotropic yielding of granular media. Using a hexapedal robot on a tiltable granular bed, we systematically measure locomotion speed together with slope-dependent normal and shear granular resistive forces. While normal penetration resistance remains nearly unchanged with inclination, shear resistance decreases substantially as slope angle increases. Guided by these measurements, we develop a simple robot-terrain interaction model that predicts anchoring timing, step length, and resulting robot speed, as functions of terrain strength and slope angle. The model reveals that slope-induced performance loss is primarily governed by delayed anchoring and increased backward slip rather than excessive sinkage. By extending the model to generalized terrain conditions, we construct failure phase diagrams that identify sinkage- and slippage-induced failure regimes, enabling quantitative risk estimation for locomotion on granular slopes. This physics-informed framework provides predictive insight into terrain-dependent failure mechanisms and offers guidance for safer and more robust robot operation on deformable inclines.

0.25

Optimal control of a swimming robot based on Purcell's microswimmer model

cs.RO physics.flu-dynmath.OC ·2026-08-18 ·Noam Berkovich Lahav, Oren Wiezel, Yizhar Or
similarity 0.47
Abstract

Purcell's swimmer is a well-known planar model of a swimming microorganism, governed by low Reynolds number hydrodynamics, which is comprised of three rigid links connected by actuated rotary joints. This model has been analyzed as a robotic locomotion system governed by first-order nonlinear dynamics with a periodic input (gait) of the two joint angles. In this work, we present a robotic macro-scale realization of this three-link swimmer moving in a highly viscous fluid. We propose a simple variant of Purcell's theoretical model with non-slender links and a central rigid sphere which represents the added drag of the robot's central flotation block, and calibrate the model's parameters to fit experimental measurements. Next, we apply optimal control formulation based on Pontryagin's Maximum Principle (PMP) in order to find optimal gaits that maximize the displacement per cycle under bounds on the joint angles. Employing a differential geometric method that transforms the problem to area integral enclosed by the gait trajectory in the plane of joint angles, enables visual interpretation which explains topological changes in displacement-optimal gaits upon varying the bound on the joint angles. We then apply PMP formulation to the problem of maximizing Lighthill's energy efficiency in order to obtain a boundary value problem (BVP) whose solution gives efficiency-optimal gaits for Purcell's swimmer model, as well as its variant with a central sphere. Finally, we utilize numerical methods such as parameterizing the input gait as a truncated Fourier series, as well as GPOPS-II solver, to produce sufficient initial guess values for solving the BVPs and obtaining efficiency-optimal gaits.

0.16

Robust Underwater Grasping of Sloped Objects with a Waterproof Passive Adaptive Gripper

cs.RO ·2026-09-11 ·Jooyoung Hong, Daewon Hong, Joohyung Kim
similarity 0.45
Abstract

Robust grasping of everyday objects remains challenging for parallel-jaw grippers, particularly when handling sloped or asymmetric items that induce torque-driven rolling and shear slip. These challenges become even more severe in domestic environments such as kitchens, where objects are often wet or submerged, drastically reducing friction between the gripper and the object. To address these issues, we present a waterproof passive adaptive gripper that combines local and global adaptability for high-performance grasping in the submerged environments. The proposed gripper features a fully waterproof design that integrates a passive rotational joint for global self-alignment on sloped surfaces and passive variable-stiffness pads for local surface adaptation. Experiments in both dry and underwater conditions on various cylindrical and conical objects demonstrate superior holding capability and grasp robustness compared to rigid-pad and fixed-joint baselines. The proposed design offers a practical and robust solution that successfully enables stable underwater manipulation of diverse everyday objects, effectively addressing a critical gap in current underwater robotic grasping for daily-life applications.

0.26