CS Paper Radar

Inferring Soil Friction Angle from Robot Foot-Ground Force Histories: A Bayesian Inverse Approach to Proprioceptive Soil Sensing

Dawei Xu, Zhijie Wang

cs.RO ·submitted 2026-09-29 02:59 UTC · v1

Abstract

Foot-ground interaction signals recorded by quadruped robots may enable spatially distributed, in situ characterization of soil strength. As a first step, we test whether the internal friction angle $φ$ of cohesionless soil can be identified from the force history of a simplified rotating leg. A two-dimensional continuum model implemented with the material point method, benchmarked against measured rotating-leg force histories, generates the training data, and two Gaussian-process surrogates support Bayesian inversion of the full histories. In matched-model experiments, the framework recovers 14 off-grid friction angles with a median absolute error of approximately $0.1^\circ$ (maximum $\sim 0.7^\circ$); the reported credible intervals contain the true value in every case. These results establish that $φ$ is identifiable when the forward model is correctly specified, and support further development of proprioceptive soil sensing for spatially variable terrain, with applications from physics-grounded world models for robot training to post-wildfire slope assessment.

Comment
14 pages, 12 figures

Closest papers

Nearest neighbours by meaning across the whole index.

NeSAM: Neuro-Symbolic Kinodynamics with Soil Adaptation for Off-Road Mobility

cs.RO ·2026-08-21 ·Chenhui Pan, Tong Xu, Francesco Cancelliere, Xuesu Xiao
similarity 0.60
Abstract

Accurate prediction of off-road vehicle motion over deformable terrain remains challenging because sinkage, slip, and traction vary with local soil conditions. Existing learning-based kinodynamic models directly approximate vehicle-terrain interactions from data but do not explicitly represent soil mechanics and offer limited physical interpretability. To address these limitations, we present NeSAM, a neuro-symbolic framework that combines differentiable Bekker-Wong terramechanics with learned terrain representations and a Transformer-based residual dynamics model for long-horizon, six degree-of-freedom kinodynamic prediction. The terramechanics component models soil-dependent interaction forces, while the residual model corrects discrepancies between the analytical prediction and the observed vehicle dynamics. NeSAM further estimates physically meaningful soil parameters from terrain observations and updates them online using an extended Kalman filter. We evaluate NeSAM in Verti-Bench, a simulator built on the Chrono multiphysics engine, and validate its performance on a physical Verti-4-Wheeler platform. NeSAM improves prediction accuracy by up to 30% in simulation and 29% on real-world data relative to the strongest compared baselines. When integrated with a close-loop navigation controller, NeSAM further improves traversal success rate through online soil adaptation while reduces Hausdorff distance to the reference trajectory by 69.4%, indicating improved trajectory tracking accuracy.

0.47

SCRUB: Contact-Based Surface-Frame Estimation for Force-Motion Control with an Armless Quadruped

cs.RO ·2026-11-04 ·Sourav Selvaraj, Juan Pablo Espinosa Chessal, Mahdi Agheli
similarity 0.60
Abstract · 8 pages, 6 figures, 4 tables

Wiping, sanding, and inspection robots press a sliding tool on a surface with controlled force. Controlling that force needs the surface normal, which is unknown on real-world, unmapped surfaces. Surface-normal estimators can help estimate the surface normal, but they either need a friction model or assume that the instantaneous tool velocity lies along the surface; however, walking violates this assumption. We propose SCRUB, a contact-based surface-frame estimator, which lets an armless quadruped slide a body-mounted tool along near-vertical surfaces in the absence of known, axis-aligned, or vision-predicted normals. SCRUB's predictive controller presses and slides the tool using a Kalman-filter estimate of the normal from two cues: 1) A force cue measures the estimate's tilt across the motion. If friction directly opposes the motion, the cue is zero exactly when that tilt is zero, for any friction coefficient. However, if the cue's sliding direction is wrong, friction appears as a false tilt. 2) A velocity cue measures tilt along the motion. Walking and pressing move the tool in and out. SCRUB therefore subtracts the commanded press rate from the tool velocity, averages the result over each gait cycle, and treats this mean as lying along the surface. On Unitree Go1 hardware at nominal speed and load, SCRUB completed every wall traverse and column orbit. No orbit completed with either cue removed, without gait averaging, or with a fixed normal.

0.21

MILD: Tractable Terrain Modeling for Learning Improved Bipedal Locomotion on Deformable Surfaces

cs.RO ·2026-08-20 ·Zeren Luo, Jiahui Zhang, Zhe Xu, Wanyue Li, Xinqi Li +4 more
top venuehighly cited similarity 0.59
Abstract · 8 pages, 9 figures

Enabling robots to walk on yielding terrain is vital for applications ranging from disaster response to planetary exploration. While bipedal robots hold immense potential, their locomotion on deformable surfaces remains limited as current simulators fail to capture the spatiotemporal heterogeneity of such yielding substrates. We present MILD, featuring a physics-grounded discrete-element contact solver that accurately simulates spatially varying foot-terrain interactions. Complementing this model, we train a terrain-aware locomotion controller via deep reinforcement learning with latent modulation and proprioceptive estimation. Quantitative comparisons against state-of-the-art methods show our approach generates more diverse and realistic contact scenarios during training, resulting in controllers that exhibit natural adaptation on real deformable surfaces. Through hardware experiments, we demonstrate the system's capability for online terrain identification and adaptation across a wide range of surface stiffness.

0.72

Terrain-Dependent Intra-Cycle Leg Timing for Effective Locomotion on Granular Slopes

cs.RO ·2026-10-02 ·Long Zhao, Xingjue Liao, Feifei Qian
similarity 0.58
Abstract

Locomotion on granular slopes such as sand dunes remains a fundamental challenge for legged robots due to reduced shear strength and gravity-induced anisotropic yielding of granular media. Using a hexapedal robot on a tiltable granular bed, we systematically measure locomotion speed together with slope-dependent normal and shear granular resistive forces. While normal penetration resistance remains nearly unchanged with inclination, shear resistance decreases substantially as slope angle increases. Guided by these measurements, we develop a simple robot-terrain interaction model that predicts anchoring timing, step length, and resulting robot speed, as functions of terrain strength and slope angle. The model reveals that slope-induced performance loss is primarily governed by delayed anchoring and increased backward slip rather than excessive sinkage. By extending the model to generalized terrain conditions, we construct failure phase diagrams that identify sinkage- and slippage-induced failure regimes, enabling quantitative risk estimation for locomotion on granular slopes. This physics-informed framework provides predictive insight into terrain-dependent failure mechanisms and offers guidance for safer and more robust robot operation on deformable inclines.

0.25

When Obstacles Bend: Modeling Vegetation Deformation in the context of Field Robotics

cs.RO ·2026-08-26 ·Zaar Khizar, Tom Montagnon, Roland Lenain, Romuald Aufrère, Johann Laconte
hot direction similarity 0.58
Abstract · 8 pages, 7 figures, submitted to IEEE Robotics and Automation Letters (RA-L)

Autonomous robots operating in natural environments must often interact with vegetation rather than simply avoid it. In this context, traversability is typically defined from the robot's perspective, by measuring how a specific platform responds when moving through the environment. While practical, this viewpoint entangles the assessment of the environment with the robot's own dynamics, making the resulting characterization difficult to transfer across different platforms. More importantly, it does not directly reflect the properties of the vegetation itself, which are the true source of interaction and potential damage in applications such as agriculture and environmental monitoring. To address this limitation, we propose to characterize vegetation through its intrinsic mechanical properties, independently of any specific robot. By combining deformation measurements with contact force data, we estimate the underlying mechanical parameters and reconstruct the vegetation's response to interaction. This enables vegetation-aware navigation based on intrinsic environmental properties rather than platform-dependent metrics.

0.34

Proprioceptive Force Estimation for Quadruped Locomotion and Human-Robot Interaction

cs.RO ·2026-09-28 ·Run Wang, Xu Yang, Alapati Tuerxun, Yilin Mo
similarity 0.58
Abstract · 8 pages, 10 figures

Payload forces must be accommodated during locomotion, while leash forces can specify desired motion. We investigate whether a shared three-dimensional force estimate in newtons, inferred from proprioceptive history under sustained loading, can support both tasks. An estimator and locomotion policy are jointly trained with supervised force and velocity outputs and learned latent context. The estimated force conditions locomotion and additionally generates planar-velocity and yaw-rate commands for leash guidance through an analytical map. In sustained-force simulation sweeps, temporal means of componentwise force root mean square error range from 1.44 to 2.83\,N. Compared with a domain-randomized baseline, the framework reduces velocity-tracking and base-orientation error scores by 21.6\% and 46.5\%, respectively, and increases mean survival from 68.29\% to 94.60\% in separate sustained-force tests. Unitree Go1 experiments demonstrate stationary vertical and horizontal force estimation, locomotion with an 8.5\,kg payload whose weight exceeds the 70\,N training force limit, and leash guidance using the same force-estimation interface.

0.25

Experience-Driven Continual Learning of Terrain Traversability for Quadruped Robots

cs.RO ·2026-09-30 ·Luca Bricarello, João Carlos Virgolino Soares, Alberto Sanchez-Delgado, Fulvio Mastrogiovanni, Claudio Semini
similarity 0.58
Abstract

Safe and efficient quadruped navigation over unfamiliar terrain requires predicting terrain-robot interaction before contact: geometry and visual appearance alone cannot reveal how the robot will slip, load its feet, or expend energy. This paper presents a continual learning pipeline that uses locomotion experience to learn these interaction outcomes from pre-contact images and continually updates the predictions as new contacts are observed. Pre-contact descriptors, produced by a DINOv3 backbone model frozen during training, are mapped to five proprioceptive indicators weighted according to measurement reliability: planar foot slip, mean normal ground-reaction force, traction index, cost of transport, and touchdown loading rate. A compact evidential regressor allows us to predict these indicators together with aleatoric and epistemic uncertainty from the visual descriptors. Continual adaptation combines bounded experience replay with a validation gate: candidate models replace the deployed predictor only when they improve performance on recent held-out data while keeping degradation on historical held-out data within a prescribed tolerance. Predictions and epistemic uncertainty are projected into a local multilayer map and combined into a conservative traversability score map whose property weights can be adjusted without retraining. The resulting map is used for downstream navigation tests. The ROS2 implementation supports evaluation on a Unitree Go2 in simulation and on hardware, with models trained separately in each domain. On a sequential hardware stream over three previously unseen terrains, gated replay reduces final anchor negative log-likelihood (NLL) degradation by 23.1% relative to replay without the gate while attaining similar new-terrain adaptation.

0.17

TactileStep: Sole Tactile Learning for Regulating Foot-Terrain Interaction in Humanoid Locomotion

cs.RO ·2026-09-24 ·Zizhuo Wang, Ming-ju Lee, Shaoting Zhu, Haozhe Lou, Hang Zhao +1 more
similarity 0.57
Abstract

Humanoid parkour policies can traverse various terrains, but task completion may mask challenges of harsh landings, edge contacts, and unstable stance contacts. Humans naturally regulate foot-terrain interaction through tactile feedback, modulating contact compliance according to terrain stiffness. This highlights a key domain gap between humans and humanoid robots: the absence of rich tactile sensing in most humanoid systems. We address this problem with TactileStep, a deployable tactile learning framework that brings sole pressure sensing into humanoid locomotion control for softer touchdowns and more stable support. TactileStep aligns tactile simulation with the real pressure insole, allowing the policy to learn from the same contact features available on hardware. During training, we use tactile and motion cues to recognize different foot-contact phases and apply phase-aware rewards that encourage safer landing and more stable stance. Evaluated in simulation and on a Unitree G1 humanoid across diverse terrains, TactileStep reduces peak touchdown force by up to 48.8% and peak A-weighted impact noise by up to 30.1 dB over a strong perceptive baseline, while increasing stance contact area by up to 23.8%.

0.25