CS Paper Radar

SCRUB: Contact-Based Surface-Frame Estimation for Force-Motion Control with an Armless Quadruped

Sourav Selvaraj, Juan Pablo Espinosa Chessal, Mahdi Agheli

cs.RO ·submitted 2026-11-04 15:28 UTC · v1

Abstract

Wiping, sanding, and inspection robots press a sliding tool on a surface with controlled force. Controlling that force needs the surface normal, which is unknown on real-world, unmapped surfaces. Surface-normal estimators can help estimate the surface normal, but they either need a friction model or assume that the instantaneous tool velocity lies along the surface; however, walking violates this assumption. We propose SCRUB, a contact-based surface-frame estimator, which lets an armless quadruped slide a body-mounted tool along near-vertical surfaces in the absence of known, axis-aligned, or vision-predicted normals. SCRUB's predictive controller presses and slides the tool using a Kalman-filter estimate of the normal from two cues: 1) A force cue measures the estimate's tilt across the motion. If friction directly opposes the motion, the cue is zero exactly when that tilt is zero, for any friction coefficient. However, if the cue's sliding direction is wrong, friction appears as a false tilt. 2) A velocity cue measures tilt along the motion. Walking and pressing move the tool in and out. SCRUB therefore subtracts the commanded press rate from the tool velocity, averages the result over each gait cycle, and treats this mean as lying along the surface. On Unitree Go1 hardware at nominal speed and load, SCRUB completed every wall traverse and column orbit. No orbit completed with either cue removed, without gait averaging, or with a fixed normal.

Comment
8 pages, 6 figures, 4 tables

Closest papers

Nearest neighbours by meaning across the whole index.

CoPRE: Improving Sensitivity in Proprioceptive Contact Detection for Low-Cost Robot Arms

cs.RO ·2026-09-23 ·Yuxiao Zhu, Jinzhou Li, Yifei Dong, Muhammad Suhail, Chunyuan Yang +4 more
similarity 0.65
Abstract

Contact detection during robotic manipulation allows robots to recognize unexpected contact and adapt their motion accordingly. However, in low-cost robot arms without dedicated force or tactile sensors, detecting weak contacts from proprioception is challenging because the resulting changes in joint-level proprioceptive signals can be small compared to normal variation and noise caused by robot motion itself. We introduce Contact-free Proprioceptive Response Estimation (CoPRE), improving proprioceptive contact detection sensitivity using only contact-free motion, without additional force sensors, contact labels, or analytical dynamics models. CoPRE estimate the expected joint torques under contact-free motion from proprioceptive state history and commanded motion, while removing recent observations that may already reflect contact. It then computes the residual between the expected and observed joint torque estimates, and maps this residual to a contact score using a noise-weighted Jacobian. Real-robot experiments on ARX Arm and Unitree G1 show that CoPRE achieves 74.1% and 82.2% recall on the tested contact trials, compared with 0%/0% on ARX and 16.3%/42.2% on G1 for the learned torque-prediction and inverse-dynamics baselines. CoPRE also reaches 90% detection rate for pushing force at 3.5 N on ARX and 5.5 N on G1. To demonstrate the downstream utility of our method, we implement belief-space manipulation planning for obstacle-aware object placement and book insertion where detected contacts update the spatial belief and enable the robot to retreat from blocked motions, adjust its pose, and retry. Project website at https://copre-arm.github.io

0.35

Force/Torque-Based Kinematic Adaptation for Robotic Manipulation Tasks

cs.RO ·2026-08-21 ·Carl Glen Henshaw
hot direction similarity 0.63
Abstract · 29 pages including appendices, 3 figures

Contact-rich robotic manipulation requires an accurate model of the kinematic relationship between a robot's joints and the task features it senses. This relationship is rarely known exactly: it changes with each tool the robot picks up and shifts, sometimes almost instantaneously, as contact modes change --- especially for multi-fingered hands that make and break contact at points that are not exactly prescribed, as in full-hand grasping. This paper develops an adaptive scheme that estimates that relationship online, using only joint-angle sensing and a wrist-mounted force/torque sensor, with no exteroceptive measurement of the tool tip. We derive a provably stable kinematic update law that identifies the kinematics of an unknown tool from force/torque feedback alone, and prove stability of both the rigid case and the case with a compliance controller as an inner loop. We show that identification is confined to the directions the motion excites --- so that, for example, a tool's length is unobservable under a rigid insertion push, while a compliant loop's passive yielding partially excites it; and that with a second-order admittance the compliant certificate holds unconditionally in continuous time. We also pose the combined control and estimation problem as a Quadratic Program (QP): the formulation yields the prediction term of the update law exactly but, instructively, cannot reproduce the tracking adaptation term. We validate the scheme in simulation on a peg-in-hole insertion. This work is the first step in a research program aimed at factoring manipulation learning into a task policy which can be learned in isolation of the robot, for instance by reinforcement learning, and an adaptive kinematic component that adapts online to the particular robot, hand, or tool in use.

0.29

Relative Contact Velocity-Controlled Hand-Object Mechanism for Dexterous Tool Manipulation

cs.RO ·2026-09-22 ·Sunyu Wang, Jean Oh, Nancy S. Pollard
hot direction similarity 0.62
Abstract

This work investigates how to enable general multi-finger robotic hands to perform the complete tool manipulation process, which entails picking up a tool, loading it into a suitable pose, and then wielding it. Inspired by human tool manipulation and mechanical design principles, we model the hand and the tool as a unified hand-object mechanism (HOM) composed of sub-assemblies. Specifically, we define a HOM as consisting of the hand, the object, and the generalized contact frames, allowing the HOM's motions to be expressed with the same set of Cartesian-space relative contact velocities, irrespective of the hand's kinematics and geometry. Then, we define a HOM's sub-assemblies as relative contact velocity and contact force constraints between fingers. Building on these definitions, we developed a lightweight and physically interpretable motion planning and contact estimation framework using least squares and a complementary filter. We evaluated our framework in simulation by teleoperating five different robotic hands. The results show that our framework enabled all five hands to execute the complete tool manipulation process, achieving dexterous behaviors even from identical, simple reference trajectories. Furthermore, the results showcase our framework's adaptability to different hands, tools, and tasks, enabled by its kinematic and geometric foundation. Please visit website for videos: \href{https://sunyuw.github.io/hom-sim/}{https://sunyuw.github.io/hom-sim/}

0.33

Multi-Modal Non-Prehensile Estimation of Physical Parameters via Press-and-Pull Tipping

cs.RO ·2026-09-27 ·Steven M. Hyland, Jing Xiao, Cagdas D. Onal
similarity 0.62
Abstract

Recovering physical properties of unknown objects through non-prehensile interaction is challenging because no single manipulation primitive reveals all relevant parameters. Planar pushing couples mass and friction, while conventional tipping cannot recover friction and may fail entirely when low-friction or curved-base objects slide or rotate instead of tipping. We introduce a multi-modal estimation framework that combines a sliding interaction with a press-and-pull tipping primitive to recover object mass, center of mass height, and surface friction. The press-and-pull interaction increases the object-table sliding threshold and stabilizes the pivot, enabling controlled tipping without any prior geometric object model. Wrist force/torque sensing, RGB-D perception, and robot proprioception are fused to estimate the physical parameters from the two complementary interaction modes. Experiments on an ABB IRB120 across four objects with varied geometry, mass, center of mass, and friction achieve low relative error, while successfully operating on curved-base objects that fail under conventional forward tipping. The results demonstrate that complementary non-prehensile interactions can recover a compact set of physical parameters without grasping, a prior object model, or learned interaction dynamics.

0.23

ZeroTouch: Tactile-Supervised Visual Contact Estimation for Contact-Rich Manipulation

cs.RO ·2026-09-18 ·Dmitriy Kosenkov, Daniia Zinniatullina, Miguel Altamirano Cabrera, Iana Zhura, Mikhail Derevianchenko +1 more
similarity 0.62
Abstract

Reliable robotic grasping benefits from estimating the evolving physical interaction and selecting a grasp-dependent compression target. Tactile sensors provide direct interaction measurements but require dedicated hardware at deployment. We introduce ZeroTouch, a tactile-supervised framework that predicts dense contact deformation, the instantaneous six-axis wrench, and a grasp-dependent desired compression target from wrist RGB observations, gripper state, and local gravity direction. Tactile measurements are used only as privileged supervision during training and are not required at deployment. On the full validation set, the complete architecture reduces normal-force MAE from 2.017 N for a state-only baseline to 0.531 N. In physical evaluation with 20 trials per condition, ZeroTouch achieves 95% success on an unseen object, 80% in a seen-object/unseen-grasp condition, and 90% under a content/load shift. Under the same evaluation protocol, OpenVLA achieves 25%, 40%, and 55%, while SmolVLA achieves 10%, 25%, and 35%, respectively.

0.20

Robot Learning with Visual Predicted Force

cs.RO cs.AI ·2026-10-03 ·Haonan Chen, Feiyang Wu, Yuxiang Ma, Mustafa Mete, Pengfei Ye +9 more
similarity 0.61
Abstract · 9 pages, 8 figures. Project Website: https://visual-force.github.io/

Force-aware manipulation typically relies on specialized force or tactile sensors. We show that force-aware manipulation can instead be achieved through visual force prediction from the deformation of a compliant Fin Ray gripper. Our approach trains two models. First, we train a visual force estimator on calibration data and use it to annotate task demonstrations with force estimates. Second, we train an action--force proposal policy on these force-augmented demonstrations to jointly generate candidate robot actions and their associated forces. At test time, we sample candidate actions and the forces they are expected to produce, then execute the action whose predicted force is closest to a target from the demonstrations. We evaluate our approach on berry picking, empty-can grasping, in-hand reorientation, and plug insertion. Our results show that visual force prediction can guide inference-time action selection for contact-rich manipulation without requiring force or tactile sensors at deployment.

0.25

Intent-guided Adaptive Stiffening for Visuomotor Policies under Unknown Resistance

cs.RO ·2026-10-13 ·Francesco Cufino, Carmela Mariniello, Mario Selvaggio, Andreas Sochopoulos, Fabio Ruggiero
similarity 0.61
Abstract · Submitted to ICRA 2027

Manipulation tasks such as unscrewing a cap or sliding a part in contact with a surface require imposing force along a high-friction direction: the robot must overcome a resistance rather than yield to it. Generative visuomotor policies predict the motion for such tasks but not the authority needed to realize it, and that authority is bounded by the impedance controller beneath them: when the resistance exceeds what a compliant controller can exert under a bounded tracking error, the task is unattainable however accurate the prediction is. The required amount cannot be anticipated either, since it depends on a contact state the observation does not reveal. In this paper, we propose a residual stiffening layer placed underneath an unmodified policy. Resistance is recognized, without force sensing, from the mismatch between the motion the policy commands and the motion the robot realizes, and a four-mode supervisor raises the stiffness along a single direction read off the policy's own action chunk, retains it while the task progresses and releases it afterwards. The layer needs no compliance labels, no retraining and no re-collected demonstrations. On two real tasks, unscrewing a bottle cap and pushing a T-nut along a T-slot groove against non-homogeneous friction, evaluated at six resistance levels of which two were withheld from the demonstrations, the layer raises the success rate from 52% to 90% while producing 61% less peak off-axis force than a uniformly stiff controller at the same resistance.

0.21

Physical-Touch Observability from Wrist Wrench in Granular Scooping

cs.RO ·2026-09-19 ·Hongyi Lin, Song Zhang, Xubo Liu, Yang Liu
similarity 0.60
Abstract

Mining and earthmoving are important real-world deployment settings for embodied intelligence. Autonomous transport and driving systems have improved substantially, but loading and scooping still often depend on skilled human operators, exposing personnel and equipment to operational risk. For robotic scooping, pre-contact RGB-D sensing reveals surface geometry but not the resistance, compaction, tool engagement, or load transfer that emerge during interaction. We test whether the current scoop's six-axis wrist force/torque (F/T), or wrist wrench, contains information about final collected volume, and whether that information depends on the correctly paired action-terrain interaction. We call this property physical-touch observability. Using 6,700 real-robot scoops across 67 terrains, we evaluate correctly paired current-scoop F/T against pre-contact prediction and correspondence-breaking controls under terrain-held-out testing. At the retrospective 60% sequence boundary, correctly paired F/T reduces mean absolute error by 14.2% relative to Action-only and by 21.9% relative to cross-terrain mismatched F/T. Engineered signal summaries reproduce the result across model architectures. Together, these findings position wrist wrench not merely as a low-level feedback signal, but as a task-level perceptual modality through which embodied robots can infer hidden physical states during interaction, providing a foundation for response-aware autonomy in mining and other contact-rich tasks.

0.23