CS Paper Radar

CoPRE: Improving Sensitivity in Proprioceptive Contact Detection for Low-Cost Robot Arms

Yuxiao Zhu, Jinzhou Li, Yifei Dong, Muhammad Suhail, Chunyuan Yang, Xinyuan Luo, Haoyu Li, Boyuan Chen, Xianyi Cheng

cs.RO ·submitted 2026-09-23 05:32 UTC · v1

Abstract

Contact detection during robotic manipulation allows robots to recognize unexpected contact and adapt their motion accordingly. However, in low-cost robot arms without dedicated force or tactile sensors, detecting weak contacts from proprioception is challenging because the resulting changes in joint-level proprioceptive signals can be small compared to normal variation and noise caused by robot motion itself. We introduce Contact-free Proprioceptive Response Estimation (CoPRE), improving proprioceptive contact detection sensitivity using only contact-free motion, without additional force sensors, contact labels, or analytical dynamics models. CoPRE estimate the expected joint torques under contact-free motion from proprioceptive state history and commanded motion, while removing recent observations that may already reflect contact. It then computes the residual between the expected and observed joint torque estimates, and maps this residual to a contact score using a noise-weighted Jacobian. Real-robot experiments on ARX Arm and Unitree G1 show that CoPRE achieves 74.1% and 82.2% recall on the tested contact trials, compared with 0%/0% on ARX and 16.3%/42.2% on G1 for the learned torque-prediction and inverse-dynamics baselines. CoPRE also reaches 90% detection rate for pushing force at 3.5 N on ARX and 5.5 N on G1. To demonstrate the downstream utility of our method, we implement belief-space manipulation planning for obstacle-aware object placement and book insertion where detected contacts update the spatial belief and enable the robot to retreat from blocked motions, adjust its pose, and retry. Project website at https://copre-arm.github.io

Closest papers

Nearest neighbours by meaning across the whole index.

Force/Torque-Based Kinematic Adaptation for Robotic Manipulation Tasks

cs.RO ·2026-08-21 ·Carl Glen Henshaw
hot direction similarity 0.68
Abstract · 29 pages including appendices, 3 figures

Contact-rich robotic manipulation requires an accurate model of the kinematic relationship between a robot's joints and the task features it senses. This relationship is rarely known exactly: it changes with each tool the robot picks up and shifts, sometimes almost instantaneously, as contact modes change --- especially for multi-fingered hands that make and break contact at points that are not exactly prescribed, as in full-hand grasping. This paper develops an adaptive scheme that estimates that relationship online, using only joint-angle sensing and a wrist-mounted force/torque sensor, with no exteroceptive measurement of the tool tip. We derive a provably stable kinematic update law that identifies the kinematics of an unknown tool from force/torque feedback alone, and prove stability of both the rigid case and the case with a compliance controller as an inner loop. We show that identification is confined to the directions the motion excites --- so that, for example, a tool's length is unobservable under a rigid insertion push, while a compliant loop's passive yielding partially excites it; and that with a second-order admittance the compliant certificate holds unconditionally in continuous time. We also pose the combined control and estimation problem as a Quadratic Program (QP): the formulation yields the prediction term of the update law exactly but, instructively, cannot reproduce the tracking adaptation term. We validate the scheme in simulation on a peg-in-hole insertion. This work is the first step in a research program aimed at factoring manipulation learning into a task policy which can be learned in isolation of the robot, for instance by reinforcement learning, and an adaptive kinematic component that adapts online to the particular robot, hand, or tool in use.

0.29

Mixture of Flow Matching and Particle Filter for Proprioception-Based Online Contact Estimation

cs.RO ·2026-10-21 ·Seo Wook Han, Min Jun Kim
top venue similarity 0.67
Abstract · Author accepted manuscript; 21 pages (including a cover page), 21 figures, 5 tables

In this article, we propose ContactFlowFilter, a novel approach for contact estimation that determines the number of active contacts, their locations, and the associated force vectors. We consider a robot manipulator equipped with joint torque sensors and a base force/torque sensor; such a proprioceptive-only setup presents a challenging inverse problem characterized by (i) multi-modality from non-unique solutions, (ii) temporal dependencies in state evolution, and (iii) discrete contact events involving contact addition/removal. Existing approaches, such as particle filters (PFs) and learning-based methods, often struggle to address these challenges simultaneously. To overcome this, ContactFlowFilter integrates a generative model into the PF framework. The recursive structure of the PF captures temporal dependencies, while the flow matching model serves as an auxiliary proposal distribution to track multi-modal beliefs and detect contact events. Extensive validation in both simulation and real-world experiments confirms the effectiveness of the proposed method. In real-world settings, ContactFlowFilter achieves the lowest dissimilarity from the target distribution, with errors of only 0.36 cm and 0.88 cm for single- and dual-contact scenarios, respectively, while operating at 0.69 ms and 2.69 ms.

0.44

GIFT: Glove-Inferred Force Transfer: Force-Aware Human-to-Robot Skill Transfer from a Wearable Sensing Glove to a Robot Hand Without Tactile Sensors

cs.RO ·2026-09-12 ·Tzach Sarusi
code/data similarity 0.67
Abstract · 7 pages, 5 figures, 1 table. Project page: https://tzahsarusi.github.io

Human-to-robot skill transfer from sensing gloves has so far relied on shared hardware: the same tactile glove worn by the demonstrator and the robot, or a learned alignment between two tactile sensors. We present GIFT (Glove-Inferred Force Transfer), a pipeline in which the interface between human and robot is a physical unit rather than a shared sensor: fingertip force is measured in newtons on the human side and estimated in newtons on the robot side. A wearable glove records finger flexion, calibrated fingertip force, and wrist orientation, while a head-mounted camera records the demonstration; no robot is present. At deployment, the robot estimates force from actuator-current residuals relative to a free-space baseline, through a calibrated mapping to newtons, so any position-controlled hand that reports motor current can serve as the deployment platform. The policy uses a glove-space state and predicts finger-position targets; the robot enters only through two calibrated adapters, a retargeting decoder and a force estimator. We evaluate GIFT on a cup grasp-and-hold task with two action-chunking policies trained on the same demonstrations, with fingertip-force inputs retained in one and zeroed in the other. In a 50-rollout evaluation with sample size and metrics fixed before scoring, both policies succeeded in all 25 rollouts. The median of the per-rollout hold-phase grip-force estimates was 53% lower with force inputs: 1.20 N versus 2.55 N (one-sided Mann-Whitney U, p<0.0001). In an observation ablation, a vision-only policy achieved 0/15 grasps, policies given hand-command state acquired the grasp, and the force inputs determined how hard the policy held. A force channel measured on the human hand thus transfers to a robot hand with no tactile hardware, through a retargeting map from five glove channels to seven robot actuators, with no sensor shared between the two.

0.32

Proprioceptive Finger Force Estimation for Reliable Box Manipulation

cs.RO ·2026-10-28 ·Junha Cha, Chanwoo Kim, Kisang Park, Yeoncheol Jang, Doyoung Kim +3 more
code/data similarity 0.66
Abstract · Project page: https://finger-force-estimation.pages.dev/

Reliable box manipulation requires successful placement without damage, which depends on maintaining sufficient contact force without excessive loading. We hypothesize that per-finger force feedback improves manipulation reliability relative to open-loop finger commands. To this end, we present Finger External-Force Estimation from Proprioceptive SignaLs (FEEL), an uncertainty-aware residual method that estimates per-finger external force magnitude from proprioceptive histories. Our method combines a calibrated virtual-spring estimate with a residual distribution predicted by a Mixture Density Network (MDN) and requires no dedicated contact sensors during deployment. The estimated force is used for continuous per-finger adaptation, while predictive uncertainty is evaluated as an empirical signal of ambiguity in proprioceptive force estimation. Across ten fingers and contact forces spanning 0-20 N, our method achieves a mean RMSE of 0.251 N, reducing the error by 92.8% relative to the virtual spring and by 9.4% relative to an end-to-end MDN. In box pick-and-place, force adaptation maintains task success at 10/10 and increases both damage-free outcomes and reliability from 7/10 to 10/10. The project page is available at https://finger-force-estimation.pages.dev/

0.35

Beyond Gestures: Estimating Full Hand Pose and Contact Forces from Wrist-Worn Pressure Sensor Array

cs.HC cs.RO ·2026-09-15 ·Svetoslav Kolev, Lingni Ma, Michael Goesele, Renzo De Nardi, Jakob Engel +1 more
hot direction similarity 0.66
Abstract

Capturing hand motion and interaction forces is critical for interactive computing, VR, and high-fidelity tactile demonstrations for robot learning. We introduce a wrist-worn pressure-sensing wristband that recovers continuous full-hand pose and distributed contact force on a single wearable. The system consists of flexible capacitive sensor arrays around the wrist, which require no electrical skin contact, and a recurrent network that maps the resulting pressure signal to hand state. Our key insight is that muscle contraction and tendon displacement produce pressure patterns, which correlate strongly with hand pose and interaction force. To validate this, we collect synchronized recordings of wrist pressure, optical motion-capture hand pose, and tactile-glove interaction force, covering isolated finger motion, fingertip-force stress tests, and natural hand-object manipulation. On isolated single-user motion the wristband attains $4.6^\circ$ mean finger-joint MAE, and across four users manipulating everyday objects it estimates per-finger contact force at $R^2=0.57$, which an external pose signal brings up to $0.75$. We see the wristband as one node in a constellation of everyday wearables -- e.g. paired with an egocentric camera -- adding the contact force that vision cannot observe and taking over when the hand is occluded.

0.44

Real-Time Force Regulation for Whole-Hand Dexterous Grasping

cs.RO eess.SY ·2026-09-24 ·Sang Min Kim, Alexander Alexiev, Tzu-Yuan Lin, Sangbae Kim, Young Min Kim +1 more
code/data similarity 0.65
Abstract · 9 pages, 10 figures. Project page: https://sangminkim-99.github.io/reactive-grasp-whole-hand/

Robust dexterous grasping requires maintaining physical stability despite contacts interactively evolving across the entire hand. A precomputed force distribution can easily fail under object motion, modeling errors, or external disturbances. In this paper, we present a framework for real-time force regulation over dynamically changing whole-hand contacts. Our method geometrically estimates contacts across all hand links using a tracked object model and proprioception, without requiring tactile sensing at those contacts. It repeatedly recomputes the desired contact-force distribution subject to friction constraints, actuator limits, and an actuation-consistency constraint motivated by classical whole-limb force analysis. We integrate this force-regulation controller with reactive reaching, enabling the hand to acquire a grasp, maintain it under disturbances, and regrasp after losing the object. Simulation experiments without gravity demonstrate improved grasp retention over fixed-allocation and fingertip-only execution under controlled perturbations, while real-world experiments on a 27-DoF arm-hand system demonstrate grasp maintenance and recovery under human-applied disturbances as contacts evolve across the whole hand. Project page: https://sangminkim-99.github.io/reactive-grasp-whole-hand/

0.39

Learning Reflexive Behavior for Contact-Rich Manipulation

cs.RO ·2026-10-02 ·Quan Nguyen, Yunho Kim, Joonho Lee
similarity 0.65
Abstract

During contact-rich manipulation, interactions between a robot and its environment carry information about local geometry: a surface prevents penetration, a bore guides a peg. A controller that exploits these interactions can comply with environmental constraints while preserving task intent. Robot-earning systems commonly use position, hybrid force-position, or Cartesian impedance control. Their prescribed tracking objectives, stiffness, or force-control directions may not match local constraints and may degrade performance. We learn a proprioceptive reflex policy in simulation on three simple interaction primitives: a spring, a plane, and a rail. The policy maps task-space commands to joint-position targets using state history, without direct force or geometrical measurements. Once trained, it serves as a frozen execution layer beneath higher-level controllers. We evaluate it in dual-arm box lifting, peg insertion, and surface following. In box lifting, the reflex kept the force below the threshold while the baseline failed. In rough-surface following it stayed below the 10 N reference, on par with tuned hybrid force-position control. In 0.02 mm peg insertion It reduced mean estimated contact force to less than half that of the baseline while increasing hardware success rates from at most 22 % to 36-58 %. By separating contact response from command generation, the reflex policy provides motion planners, learned policies, and teleoperators with robust contact-rich execution.

0.15

SCRUB: Contact-Based Surface-Frame Estimation for Force-Motion Control with an Armless Quadruped

cs.RO ·2026-11-04 ·Sourav Selvaraj, Juan Pablo Espinosa Chessal, Mahdi Agheli
similarity 0.65
Abstract · 8 pages, 6 figures, 4 tables

Wiping, sanding, and inspection robots press a sliding tool on a surface with controlled force. Controlling that force needs the surface normal, which is unknown on real-world, unmapped surfaces. Surface-normal estimators can help estimate the surface normal, but they either need a friction model or assume that the instantaneous tool velocity lies along the surface; however, walking violates this assumption. We propose SCRUB, a contact-based surface-frame estimator, which lets an armless quadruped slide a body-mounted tool along near-vertical surfaces in the absence of known, axis-aligned, or vision-predicted normals. SCRUB's predictive controller presses and slides the tool using a Kalman-filter estimate of the normal from two cues: 1) A force cue measures the estimate's tilt across the motion. If friction directly opposes the motion, the cue is zero exactly when that tilt is zero, for any friction coefficient. However, if the cue's sliding direction is wrong, friction appears as a false tilt. 2) A velocity cue measures tilt along the motion. Walking and pressing move the tool in and out. SCRUB therefore subtracts the commanded press rate from the tool velocity, averages the result over each gait cycle, and treats this mean as lying along the surface. On Unitree Go1 hardware at nominal speed and load, SCRUB completed every wall traverse and column orbit. No orbit completed with either cue removed, without gait averaging, or with a fixed normal.

0.21