CS Paper Radar

Proprioceptive Finger Force Estimation for Reliable Box Manipulation

Junha Cha, Chanwoo Kim, Kisang Park, Yeoncheol Jang, Doyoung Kim, Seungmin Kim, Kyungjae Lee, Sungjoon Choi

cs.RO ·submitted 2026-10-28 06:50 UTC · v1
code/data

Abstract

Reliable box manipulation requires successful placement without damage, which depends on maintaining sufficient contact force without excessive loading. We hypothesize that per-finger force feedback improves manipulation reliability relative to open-loop finger commands. To this end, we present Finger External-Force Estimation from Proprioceptive SignaLs (FEEL), an uncertainty-aware residual method that estimates per-finger external force magnitude from proprioceptive histories. Our method combines a calibrated virtual-spring estimate with a residual distribution predicted by a Mixture Density Network (MDN) and requires no dedicated contact sensors during deployment. The estimated force is used for continuous per-finger adaptation, while predictive uncertainty is evaluated as an empirical signal of ambiguity in proprioceptive force estimation. Across ten fingers and contact forces spanning 0-20 N, our method achieves a mean RMSE of 0.251 N, reducing the error by 92.8% relative to the virtual spring and by 9.4% relative to an end-to-end MDN. In box pick-and-place, force adaptation maintains task success at 10/10 and increases both damage-free outcomes and reliability from 7/10 to 10/10. The project page is available at https://finger-force-estimation.pages.dev/

Comment
Project page: https://finger-force-estimation.pages.dev/

Closest papers

Nearest neighbours by meaning across the whole index.

ReDex: Repairing Sim-to-Real Dexterous Policies by Finger-Level Compliant Interaction

cs.RO ·2026-10-05 ·Jinzhou Li, Hadi Tabatabaee, Kelin Yu, Yuyin Sun, Cheng-Hao Kuo +4 more
similarity 0.72
Abstract

Dexterous manipulation policies trained in simulation often fail to transfer to the real world because of errors in contact timing and force regulation. Yet these policies can retain useful multi-finger coordination for task progression. We propose ReDex, a framework for adapting a simulation-trained base policy to the real world by correcting local contact failures and incorporating tactile feedback. Starting from a proprioception-only base policy, ReDex allows a human operator to physically correct contact failures at selected fingers under compliant control during real-world rollouts, while the frozen base policy continues to control the remaining fingers. These rollouts combine base policy execution, human-corrected finger motion, and fingertip force observations. We reconstruct force-informed targets from these rollouts to train a standalone force-conditioned policy via behavior cloning. This design reduces human correction effort, enables learning of contact regulation from real-world interaction, and introduces force feedback into a proprioception-only policy without tactile simulation or complex full-hand teleoperation. We evaluate ReDex on two challenging, contact-rich dexterous manipulation tasks on real hardware. Compared with sim-to-real transferred base policies, ReDex increases Object Flipping success rate from 14\% to 86\% across two objects and average Screwdriver Rotation progress from 26.0% to 95.3% across three objects.

0.13

Beyond Gestures: Estimating Full Hand Pose and Contact Forces from Wrist-Worn Pressure Sensor Array

cs.HC cs.RO ·2026-09-15 ·Svetoslav Kolev, Lingni Ma, Michael Goesele, Renzo De Nardi, Jakob Engel +1 more
hot direction similarity 0.71
Abstract

Capturing hand motion and interaction forces is critical for interactive computing, VR, and high-fidelity tactile demonstrations for robot learning. We introduce a wrist-worn pressure-sensing wristband that recovers continuous full-hand pose and distributed contact force on a single wearable. The system consists of flexible capacitive sensor arrays around the wrist, which require no electrical skin contact, and a recurrent network that maps the resulting pressure signal to hand state. Our key insight is that muscle contraction and tendon displacement produce pressure patterns, which correlate strongly with hand pose and interaction force. To validate this, we collect synchronized recordings of wrist pressure, optical motion-capture hand pose, and tactile-glove interaction force, covering isolated finger motion, fingertip-force stress tests, and natural hand-object manipulation. On isolated single-user motion the wristband attains $4.6^\circ$ mean finger-joint MAE, and across four users manipulating everyday objects it estimates per-finger contact force at $R^2=0.57$, which an external pose signal brings up to $0.75$. We see the wristband as one node in a constellation of everyday wearables -- e.g. paired with an egocentric camera -- adding the contact force that vision cannot observe and taking over when the hand is occluded.

0.44

DexRemo: A Force-Sensing Hand Platform and Task Suite for Contact-Rich Removal Manipulation

cs.RO cs.LG ·2026-11-11 ·Liman Wang, Hanyang Zhong, Sun Zhaole, Wenting Cao, Babar Jamil +3 more
publishedbenchmark similarity 0.71
Abstract · Accepted for publication in IEEE Transactions on Robotics (T-RO), 2026. Project website: https://dexremo.github.io

Many manipulation tasks require separating adhered, embedded, contaminated, or mechanically constrained targets. We study this setting as removal manipulation, where progress depends on evolving contact states that are only partially observable from vision and kinematics. We introduce DexRemo, a three-finger robotic hand with high-force actuation, modular fingertips, and three-axis fingertip force sensing, together with a nine-scenario real-robot task suite spanning adhesive detachment, surface cleaning and self-cleaning, and occluded retrieval. To make multi-finger force observations easier to fuse, we express fingertip forces in a shared wrist-centered frame, giving force components consistent geometric meaning across fingers and time. Using an Action Chunking Transformer backbone, policies fuse multi-view vision, proprioception, fingertip pose, and force observations to predict closed-loop action chunks from demonstrations. Evaluation uses six core benchmark tasks for controlled fingertip-input and force-frame ablations, plus three extension scenarios for additional held-out coverage. Across these evaluations, the learned policies achieve consistent removal performance, and ablations show that wrist-frame forces, especially with fingertip pose, improve stability and generalization over local-frame force inputs and no-force baselines. Project website: https://dexremo.github.io

0.30

GIFT: Glove-Inferred Force Transfer: Force-Aware Human-to-Robot Skill Transfer from a Wearable Sensing Glove to a Robot Hand Without Tactile Sensors

cs.RO ·2026-09-12 ·Tzach Sarusi
code/data similarity 0.71
Abstract · 7 pages, 5 figures, 1 table. Project page: https://tzahsarusi.github.io

Human-to-robot skill transfer from sensing gloves has so far relied on shared hardware: the same tactile glove worn by the demonstrator and the robot, or a learned alignment between two tactile sensors. We present GIFT (Glove-Inferred Force Transfer), a pipeline in which the interface between human and robot is a physical unit rather than a shared sensor: fingertip force is measured in newtons on the human side and estimated in newtons on the robot side. A wearable glove records finger flexion, calibrated fingertip force, and wrist orientation, while a head-mounted camera records the demonstration; no robot is present. At deployment, the robot estimates force from actuator-current residuals relative to a free-space baseline, through a calibrated mapping to newtons, so any position-controlled hand that reports motor current can serve as the deployment platform. The policy uses a glove-space state and predicts finger-position targets; the robot enters only through two calibrated adapters, a retargeting decoder and a force estimator. We evaluate GIFT on a cup grasp-and-hold task with two action-chunking policies trained on the same demonstrations, with fingertip-force inputs retained in one and zeroed in the other. In a 50-rollout evaluation with sample size and metrics fixed before scoring, both policies succeeded in all 25 rollouts. The median of the per-rollout hold-phase grip-force estimates was 53% lower with force inputs: 1.20 N versus 2.55 N (one-sided Mann-Whitney U, p<0.0001). In an observation ablation, a vision-only policy achieved 0/15 grasps, policies given hand-command state acquired the grasp, and the force inputs determined how hard the policy held. A force channel measured on the human hand thus transfers to a robot hand with no tactile hardware, through a retargeting map from five glove channels to seven robot actuators, with no sensor shared between the two.

0.32

Tactus: Tactile & Pose Sensing Glove for Natural Dexterity Data Collection

cs.RO cs.AIcs.ARcs.LG ·2026-10-29 ·Li Guan, Rachael Granberry, Sahar Aseeri, Sahar Rostami, Taylor Niehues +99 more
similarity 0.70
Abstract · 9 pages

Collecting naturalistic human manipulation demonstrations with accurate contact force and hand pose is essential for robot dexterous manipulation policy and foundational world model learning - yet no existing wearable platform provides both calibrated fingertip force sensing and occlusion-resilient hand tracking in a form factor that preserves natural manipulation behavior. We present Tactus, a textile-integrated sensing glove that co-optimizes three design pillars: (1) a thin, conformal 3D-knit form factor (1.5 mm fingertip stackup) designed to minimize interference with natural manipulation, (2) strategically placed capacitive tactile sensors at manipulation-relevant regions informed by empirical contact studies, and (3) IMU-fused pose tracking that maintains accuracy through the hand-object occlusions where manipulation data is most valuable. Tactus includes a documented calibration pipeline for cross-glove consistency and per-session calibration for subject-dependent correction. To enable objective comparison, we introduce standardized benchmarking protocols for tactile force regression and hand pose estimation, and apply them to Tactus and two commercially available tactile gloves - to our knowledge the first quantitative cross-platform evaluation of this kind. Tactus resolves a minimum detectable force of 0.59 N at 95% confidence, 1.6 - 2.7x lower than the commercial baselines, and with 0.87 cross-participant consistency, while our pose tracking sustains 11.0 mm fingertip keypoint relative error during manipulation, when occlusion is heaviest. We show that these combined signals support object property estimation, slip detection, and representative recording of hand-object interaction - yielding demonstration data with the fidelity required for contact-aware manipulation policies and world models.

0.21

ZeroTouch: Tactile-Supervised Visual Contact Estimation for Contact-Rich Manipulation

cs.RO ·2026-09-18 ·Dmitriy Kosenkov, Daniia Zinniatullina, Miguel Altamirano Cabrera, Iana Zhura, Mikhail Derevianchenko +1 more
similarity 0.69
Abstract

Reliable robotic grasping benefits from estimating the evolving physical interaction and selecting a grasp-dependent compression target. Tactile sensors provide direct interaction measurements but require dedicated hardware at deployment. We introduce ZeroTouch, a tactile-supervised framework that predicts dense contact deformation, the instantaneous six-axis wrench, and a grasp-dependent desired compression target from wrist RGB observations, gripper state, and local gravity direction. Tactile measurements are used only as privileged supervision during training and are not required at deployment. On the full validation set, the complete architecture reduces normal-force MAE from 2.017 N for a state-only baseline to 0.531 N. In physical evaluation with 20 trials per condition, ZeroTouch achieves 95% success on an unseen object, 80% in a seen-object/unseen-grasp condition, and 90% under a content/load shift. Under the same evaluation protocol, OpenVLA achieves 25%, 40%, and 55%, while SmolVLA achieves 10%, 25%, and 35%, respectively.

0.20

Primitive-Informed Sampling-Based MPC for Multi-Fingered Dexterous Manipulation

cs.RO ·2026-09-14 ·Emek Barış Küçüktabak, Karankumar Patel, Jinda Cui, Zhaodong Yang, Kazuhiro Sasabuchi +1 more
hot direction similarity 0.67
Abstract

We present a primitive-informed sampling-based model predictive control (MPC) framework for multi-fingered dexterous manipulation. Sampling-based MPC evaluates candidate control trajectories through forward simulation without requiring gradients through complex contact dynamics. However, directly sampling these trajectories in the high-dimensional joint space of a dexterous hand is inefficient and makes performance strongly dependent on the sampling distribution. Our framework biases sampling using low-dimensional manipulation primitives that encode coordinated finger motions, while simultaneously optimizing joint-level residuals to adapt these motions to the current hand-object configuration. Task-related rollout constraints reject infeasible trajectories during forward simulation, improving the effective use of the sampling budget. We evaluate the approach on a 16 DoF Allegro hand using a synchronized MuJoCo digital twin. Ablations show that both the primitive and residual are necessary for reliable continuous in-hand rotation, that increasing the sampling budget alone does not recover this coordination, and that rollout constraints substantially improve success rate. A primitive extracted for one object size transfers to other sizes and remains effective under model mismatch. The framework further supports grasping, object reorientation, and coordinated arm-hand manipulation, using primitives extracted from both a simulation-trained policy and human hand-motion data.

0.46

Robot Learning with Visual Predicted Force

cs.RO cs.AI ·2026-10-03 ·Haonan Chen, Feiyang Wu, Yuxiang Ma, Mustafa Mete, Pengfei Ye +9 more
similarity 0.67
Abstract · 9 pages, 8 figures. Project Website: https://visual-force.github.io/

Force-aware manipulation typically relies on specialized force or tactile sensors. We show that force-aware manipulation can instead be achieved through visual force prediction from the deformation of a compliant Fin Ray gripper. Our approach trains two models. First, we train a visual force estimator on calibration data and use it to annotate task demonstrations with force estimates. Second, we train an action--force proposal policy on these force-augmented demonstrations to jointly generate candidate robot actions and their associated forces. At test time, we sample candidate actions and the forces they are expected to produce, then execute the action whose predicted force is closest to a target from the demonstrations. We evaluate our approach on berry picking, empty-can grasping, in-hand reorientation, and plug insertion. Our results show that visual force prediction can guide inference-time action selection for contact-rich manipulation without requiring force or tactile sensors at deployment.

0.25