CS Paper Radar

Verification, Sensitivity, and Operating Limits of a GPU-Accelerated Planar WCSPH Model for Hydrodynamic Ram

Md Mujahid Alam, Debojit Biswas, Sukanta Chakraborty

cs.CE math.NAphysics.flu-dyn ·submitted 2026-08-26 17:31 UTC · v1

Abstract

Hydrodynamic ram (HRAM) loading remains a persistent challenge in impact mechanics, less due to exotic physics than to the difficulty of achieving convincing quantitative agreement in reduced-order representations. Prevailing studies typically employ a single mesh and boundary treatment validated against one experimental dataset, leaving unresolved whether agreement reflects genuine fidelity or compensating discretization errors. This work presents a planar 2D, GPU-accelerated WCSPH solver employing an Adami-type ghost-particle boundary condition, extended for the first time to a moving, decelerating disk penetrating a confined liquid channel at ballistic velocity. The boundary condition is examined against a purpose-derived potential-flow added-mass solution and the analytical acoustic reflection coefficient at the steel-water interface; this exploration reveals that the stiff equation of state and cavitation cutoff impose identifiable delineation of the solver's operating regime on quantitative agreement. A three-point resolution convergence study reveals a non-monotone near-probe pressure peak, attributed to a bounded ghost-fluid density inconsistency. A comprehensive coefficient sweep, conservation diagnostics, and O(N) GPU throughput scaling enable exhaustive characterization impractical in 3D. Qualitative comparison against literature evidence at 900 and 600m/s clarifies load bearing versus approximate elements. Notably, energy diagnostics reveal a modest total energy growth over the simulated window, with the fluid absorbing disproportionately more energy than the projectile relinquishes - an instructive signature of prescribed, non-back-reacting projectile kinematics that helps map the formulation's operating envelope. The resulting solver, while confined to planar geometry, delivers verified, convergence-checked performance well suited for rapid parametric design exploration.

Comment
47 pages, 12 figures

Closest papers

Nearest neighbours by meaning across the whole index.

CraftSPH: A composable framework for differentiable smoothed particle hydrodynamics implemented in PyTorch

cs.LG physics.flu-dynmath.NA ·2026-09-24 ·Gen Matono, Shujiro Fujioka, Mayuko Nishio
code/data similarity 0.62
Abstract · The code is publicly available at https://github.com/GenMNL/CraftSPH 43 pages, 14 figures

Smoothed particle hydrodynamics (SPH) is well suited to large-deformation fluid problems, and the growing use of automatic differentiation in engineering applications has motivated interest in differentiable SPH solvers. In this study, a composable differentiable SPH framework, CraftSPH, has been developed. In CraftSPH, major computational operations are implemented as independent modules that users can combine to construct solvers for different purposes. This design supports high-accuracy discretization and both explicit and implicit computation within a common framework, while allowing individual components to be maintained and extended. Selected numerical operations also support automatic differentiation (AD) for physical-parameter estimation and potential coupling with deep learning models. These capabilities were demonstrated through forward and inverse analyses. Forward analyses using an implicit SPH scheme with high-accuracy discretization showed good agreement with analytical and reference solutions for Poiseuille flow and a rising bubble, while capturing the key experimental trends in two- and three-dimensional dam-break problems. In inverse analyses, explicit and implicit SPH schemes were used to estimate kinematic viscosity in Taylor-Green vortex flow and Reynolds number in lid-driven cavity flow. The results also showed that the choice of operations included in the computational graph affects the computed gradients. Together, these findings demonstrate that CraftSPH enables users to assemble problem-specific solvers for forward and inverse analyses within a common framework.

0.47

HydroTuring: A physics probe benchmark testing mass, energy, and momentum conservation in hydrologic models

cs.AI physics.geo-phcs.LGphysics.app-ph ·2026-11-08 ·Zhi Li, Changming Li, Siavash Shams, Han Wang, Qingyi Yang +15 more
benchmark similarity 0.53
Abstract

Hydrologic models, including deep learning systems now deployed for operational flood forecasting, are evaluated primarily by how closely their simulated hydrographs match observed streamflow. However, high hydrograph skill does not guarantee physical consistency: in a synthetic calibration experiment, a conceptual model that loses 15% of its water input to an unreported sink still reaches a Nash-Sutcliffe efficiency of 0.93, and no shared benchmark tests whether models obey fundamental conservation laws. Here we introduce HydroTuring (v0.1.0), a black-box benchmark of 37 physics probes that test mass (24 probes), energy (7) and momentum (6) conservation in hydrologic models. Each probe runs a controlled experiment on forcing generated at run time from a recorded seed and applies binary pass or fail criteria validated against 18 physically exact and 59 deliberately broken reference models. Across 32 evaluated models (3 exact references, 7 AI-based models and 22 process-based models), only the 3 exact references pass every probe among the 28 models scored on 5 or more probes. Process-based and AI-based models pass similar shares of their scored probes (76% and 74%), and a pre-trained flood-forecasting LSTM fails 6 of the 11 runoff-only probes it can be scored on. Furthermore, 49% of all 1,184 model-probe pairs remain unscored because models omit the required state or flux variables, while the scored failures occur in perturbation responses and state bounds rather than long-term water-budget closure. HydroTuring provides a reproducible smoke test for model development, peer review and operational deployment under an open community protocol.

0.26

A $u$-$p_w$ SPH framework with mechanical-hydraulic boundary treatment in GeoDualSPHysics for large-deformation geomechanics

cs.CE ·2026-10-18 ·Yangfan Ma, Bin Su, Zheng Han, Changze Li, Mitsuteru Asai
similarity 0.53
Abstract · 23 pages, 11 figures, 6 tables

Pore-water pressure changes the effective stress and deformation of saturated geomaterials, while skeleton deformation generates pressure and drives drainage. Resolving this feedback together with hydraulic boundary conditions is necessary for simulations that connect consolidation to large post-failure movement. This paper presents a hydromechanical extension of GeoDualSPHysics using a single-layer displacement-pore-water-pressure ($u$-$p_w$) smoothed particle hydrodynamics (SPH) framework. An explicit pressure-rate equation combines volumetric compression and Darcy diffusion, and the resulting pore pressure feeds back into the skeleton momentum balance. The implementation extends the existing modified dynamic boundary condition (mDBC) infrastructure to carry hydraulic ghost values alongside mechanical boundary data. Prescribed pressure at drained surfaces is combined with impermeable walls and impermeable loaded contacts, with separate control of loading and drainage activation. The formulation is assessed through one-dimensional consolidation, two-dimensional flexible-strip loading, and the three-dimensional Cryer problem. The Cryer simulations reproduce the non-monotonic central pressure response over four Poisson ratios, with normalized pressure root-mean-square errors of 0.012-0.030. The consolidation tests also expose remaining settlement and late-time pressure discrepancies. Applications to 5 m and 8 m sensitive-clay slopes illustrate sequential retrogressive failure and large deformation. The contribution is the integration of hydraulic feedback and boundary handling within GeoDualSPHysics; the results establish an initial verification basis while identifying remaining accuracy and convergence questions.

0.31

acousticHelmholtzFoam: an MPI-parallel unstructured finite-volume solver for frequency-domain acoustics in heterogeneous two-phase media with perfectly matched layers

cs.MS physics.comp-phphysics.flu-dyn ·2026-10-06 ·Chuanchao Xu, Jun Liu, Dieter Bothe, Tomislav Maric
similarity 0.49
Abstract · 34 pages, 5 figures, 7 tables; companion paper arXiv:2610.01593

acousticHelmholtzFoam is an OpenFOAM application that computes time-harmonic acoustic pressure fields in heterogeneous gas-liquid media on unstructured polyhedral meshes. The complex pressure is stored as real and imaginary volume fields, the material coefficients are constructed from a volume-of-fluid phase fraction with geometric face-fraction averaging, and open boundaries are truncated by Cartesian perfectly matched layers (PMLs) whose damping tensor is generated by the companion utility setPMLFields. The two coupled real-valued equations are discretized with the cell-centred finite-volume operators of OpenFOAM and assembled explicitly, including processor couplings and boundary contributions, into a distributed PETSc matrix that is solved by default with the MUMPS sparse direct solver. The solver writes pressure amplitude, complex velocity, acoustic radiation pressure and time-averaged momentum flux for acoustic-force evaluation. This paper documents the implemented equations, the case interface, the assembly and solution algorithm, the build procedure and the test infrastructure. A layered gas-liquid-PML case with an analytical solution serves as an end-to-end regression: on 8000 cells the whole-domain relative complex-pressure error is $1.197\times10^{-3}$, and serial and MPI solutions on up to eight ranks agree to within $10^{-12}$ in relative $L_2$ norm. A single-axis acoustic-levitator height sweep with constant-volume spheroidal drops demonstrates the two-phase material input and the force output, and strong- and problem-size-scaling measurements characterize the direct-solver workflow. The numerical formulation and its verification are presented in a companion paper (arXiv:2610.01593).

0.27

Multi-Fidelity Particle Flow Filters based on Log Homotopy

cs.CE math.NA ·2026-10-26 ·Abhinab Bhattacharjee, Andrey A. Popov, Amit N. Subrahmanya, Adrian Sandu
similarity 0.49
Abstract

This work proposes a new Multi-Fidelity Particle Flow Filter (MFPFF) based on a linear control variate framework and multilevel Monte Carlo methods. Conventional particle filters often suffer from weight collapse and particle degeneracy in high-dimensional spaces. Particle flow filters address this by smoothly transporting prior particles toward the posterior distribution, thereby avoiding the need for resampling. This work constructs multi-fidelity particle flow filters by augmenting a small number of expensive high-fidelity particles (full-order model runs) with a large number of inexpensive low-resolution particles (reduced-order surrogates constructed via intrusive Galerkin projection). These surrogates act as control variates to enhance the statistical estimate of the full-order posterior, yielding enhanced analysis accuracy at comparable computational cost. The work focuses on two particle flows based on log homotopy, the stochastic Gromov flow and deterministic Exact flow. Numerical experiments with the Korteweg-De Vries (KdV) and Quasi-Geostrophic (QG) test problems demonstrate that the proposed MFPFF achieves accuracy comparable to high-fidelity simulations while significantly reducing computational expense.

0.29

N -phase flow simulations using X-Mesh and an explicit marker interface representation

cs.CE math.NA ·2026-11-10 ·Antoine Quiriny, Jonathan Lambrechts, Michel Henry, Nicolas Moës, Jean-François Remacle
similarity 0.49
Abstract · Keywords: Multiphase flow; X-Mesh; Front tracking; Finite element method; Topology change; Surface tension

We present a marker-based X-Mesh framework for incompressible N-phase flow simulations with sharp, explicitly tracked interfaces. The interface is represented by Lagrangian marker chains, while the computational mesh is deformed so that selected mesh edges conform to the tracked geometry without changing mesh connectivity. This combination preserves the advantages of body-fitted finite element discretizations while allowing highly distorted and nearly degenerated elements to capture fine interfacial features on relatively coarse meshes without requiring mesh refinement. The arbitrary Lagrangian-Eulerian (ALE) finite element solver uses a pressure field that is continuous within each phase and discontinuous across the fitted interface. Surface tension is introduced through a variational membrane, so the pressure jump is resolved without prescribing a curvature-dependent correction; a Young wall energy provides the corresponding treatment of fluid-fluid-solid triple points. Topological changes are handled geometrically from the marker representation. Numerical experiments illustrate the ability of the approach to transport complex interfaces and to control topology changes through marker-based feature-size criteria.

0.31

Mixed-Precision SEM-Based CFD Simulations on GPUs: A Taylor-Green Vortex case

cs.DC cs.SE ·2026-08-25 ·Yanxiang Chen, Manuel Münsch, Roman Iakymchuk
similarity 0.49
Abstract

Mixed precision is a promising approach for reducing the computational cost and energy consumption of Computation Fluid Dynamics (CFD) simulations, but its effectiveness depends strongly on where precision is reduced within the full simulation pipeline. In this work, we study Taylor-Green vortex case using Neko, a matrix-free CFD solver based on the spectral element method (SEM). Profiling shows that the fluid time step is not dominated by Krylov convergence alone: the velocity and pressure solvers require only a small number of iterations per step, while a substantial fraction of runtime is spent in other SEM operators and solver components. Motivated by this structure, we propose a three-level hierarchical mixed-precision control model. Two groups of configurations are evaluated in environments bounded by 64-bit floating-point (fp64) and 32-bit floating-point (fp32) precision, respectively. The fp64-bounded group identifies accuracy sensitive components and shows that SEM-focused fp32 computation is a promising direction for future optimization. The fp32-bounded group provides the main practical benefit. For the high Reynolds number case studied, selected configurations reduce both time- and energy-to-solution by about 34% relative to the fp64 baseline, while improving robustness compared with global fp32. Targeted fp16 kernel overrides are also explored, showing potential for selected operations but increased sensitivity in gradient-based quantities such as enstrophy. Overall, these results indicate that mixed-precision for matrix-free SEM-based CFD should be treated as a simulation-level control problem rather than solely as a Krylov-solver optimization.

0.26

diff-soup: GPU-native Differentiable Simulation and Inference for Large-scale Stiff Dynamical Systems

cs.MS physics.comp-ph ·2026-10-27 ·Samuel Degnan-Morgenstern, Martin Z. Bazant
code/data similarity 0.49
Abstract

Learning physical models from spatiotemporal data requires simulating systems of partial differential equations (PDEs) and differentiating through their solution. Upon spatial discretization, these models give rise to stiff dynamical systems that require repeatedly solving large, sparse linear systems. Traditional scientific computing frameworks are largely CPU-based and require problem-specific tuning to accelerate, scale, and differentiate. In this work, we introduce diff-soup, a differentiable, sparse-oriented, unified PDE suite for GPU-native simulation and inference of large, stiff dynamical systems. Built in JAX, diff-soup provides 1) a fully differentiable design for problems with sparse structure, 2) scaling to large problems through the NVIDIA cuDSS sparse direct solver with model and data multi-GPU parallelism, and 3) end-to-end PDE-constrained optimization, from classical statistical inference to embedded deep learning. On stiff PDE benchmarks, diff-soup outperforms established CPU- and GPU-based frameworks by one to two orders of magnitude in both forward solves and gradients. We demonstrate both a classical Bayesian inference workflow, identifying constitutive relationships, and a modern deep learning workflow, training a neural field for the catalyst activity of a three-dimensional packed bed reactor. We provide diff-soup as an open-source repository to facilitate research in computational science and engineering.

0.31