CS Paper Radar

acousticHelmholtzFoam: an MPI-parallel unstructured finite-volume solver for frequency-domain acoustics in heterogeneous two-phase media with perfectly matched layers

Chuanchao Xu, Jun Liu, Dieter Bothe, Tomislav Maric

cs.MS physics.comp-phphysics.flu-dyn ·submitted 2026-10-06 10:36 UTC · v1

Abstract

acousticHelmholtzFoam is an OpenFOAM application that computes time-harmonic acoustic pressure fields in heterogeneous gas-liquid media on unstructured polyhedral meshes. The complex pressure is stored as real and imaginary volume fields, the material coefficients are constructed from a volume-of-fluid phase fraction with geometric face-fraction averaging, and open boundaries are truncated by Cartesian perfectly matched layers (PMLs) whose damping tensor is generated by the companion utility setPMLFields. The two coupled real-valued equations are discretized with the cell-centred finite-volume operators of OpenFOAM and assembled explicitly, including processor couplings and boundary contributions, into a distributed PETSc matrix that is solved by default with the MUMPS sparse direct solver. The solver writes pressure amplitude, complex velocity, acoustic radiation pressure and time-averaged momentum flux for acoustic-force evaluation. This paper documents the implemented equations, the case interface, the assembly and solution algorithm, the build procedure and the test infrastructure. A layered gas-liquid-PML case with an analytical solution serves as an end-to-end regression: on 8000 cells the whole-domain relative complex-pressure error is $1.197\times10^{-3}$, and serial and MPI solutions on up to eight ranks agree to within $10^{-12}$ in relative $L_2$ norm. A single-axis acoustic-levitator height sweep with constant-volume spheroidal drops demonstrates the two-phase material input and the force output, and strong- and problem-size-scaling measurements characterize the direct-solver workflow. The numerical formulation and its verification are presented in a companion paper (arXiv:2610.01593).

Comment
34 pages, 5 figures, 7 tables; companion paper arXiv:2610.01593

Closest papers

Nearest neighbours by meaning across the whole index.

Partitioned Co-Simulation for CAD-integrated Vibroacoustic Problems in Unbounded Domains

cs.CE cs.SEphysics.comp-ph ·2026-09-14 ·J. I. Camarotti, P. Le, Y. Cai, R. Aristio, D. Panagiotopoulos +2 more
benchmarkunusual similarity 0.59
Abstract · J. I. Camarotti and P. Le contributed equally to this work and share first authorship. Submitted to Engineering with Computers

Vibroacoustic analysis often requires coupling structural and acoustic solvers based on different numerical formulations and discretizations, making monolithic implementations intrusive and limiting software modularity and reuse. This work presents a partitioned co-simulation framework for exterior vibroacoustic analysis that couples an Isogeometric boundary representation analysis (IBRA) structural solver with an isogeometric boundary element method (IGA-BEM) acoustic solver. The methodology operates directly on the computer-aided design (CAD) boundary representation, preserving the exact geometry throughout the analysis and supporting both weak and strong coupling between non-conforming discretizations. A key contribution is the extension of the Aitken dynamic relaxation and Interface Quasi-Newton with Inverse Least-Squares (IQN-ILS) convergence accelerators to complex-valued interface quantities, allowing the coupling iterations to account directly for both amplitude and phase information. The approach is validated using one-way and two-way coupled vibroacoustic benchmark problems involving thin-shell structures and exterior acoustic domains. The results show excellent agreement with monolithic reference solutions, while the proposed complex-valued convergence accelerators improve the robustness and convergence behavior of the strongly coupled solution procedure without compromising solution accuracy. These results demonstrate that the proposed approach provides an accurate, robust, and modular approach for CAD-integrated frequency-domain vibroacoustic analysis.

0.28

Verification, Sensitivity, and Operating Limits of a GPU-Accelerated Planar WCSPH Model for Hydrodynamic Ram

cs.CE math.NAphysics.flu-dyn ·2026-08-26 ·Md Mujahid Alam, Debojit Biswas, Sukanta Chakraborty
similarity 0.49
Abstract · 47 pages, 12 figures

Hydrodynamic ram (HRAM) loading remains a persistent challenge in impact mechanics, less due to exotic physics than to the difficulty of achieving convincing quantitative agreement in reduced-order representations. Prevailing studies typically employ a single mesh and boundary treatment validated against one experimental dataset, leaving unresolved whether agreement reflects genuine fidelity or compensating discretization errors. This work presents a planar 2D, GPU-accelerated WCSPH solver employing an Adami-type ghost-particle boundary condition, extended for the first time to a moving, decelerating disk penetrating a confined liquid channel at ballistic velocity. The boundary condition is examined against a purpose-derived potential-flow added-mass solution and the analytical acoustic reflection coefficient at the steel-water interface; this exploration reveals that the stiff equation of state and cavitation cutoff impose identifiable delineation of the solver's operating regime on quantitative agreement. A three-point resolution convergence study reveals a non-monotone near-probe pressure peak, attributed to a bounded ghost-fluid density inconsistency. A comprehensive coefficient sweep, conservation diagnostics, and O(N) GPU throughput scaling enable exhaustive characterization impractical in 3D. Qualitative comparison against literature evidence at 900 and 600m/s clarifies load bearing versus approximate elements. Notably, energy diagnostics reveal a modest total energy growth over the simulated window, with the fluid absorbing disproportionately more energy than the projectile relinquishes - an instructive signature of prescribed, non-back-reacting projectile kinematics that helps map the formulation's operating envelope. The resulting solver, while confined to planar geometry, delivers verified, convergence-checked performance well suited for rapid parametric design exploration.

0.32

PoliVEM: a Python-driven virtual element framework for computational solid mechanics

cs.SE ·2026-09-26 ·Paulo Akira F. Enabe, Rodrigo Provasi
similarity 0.48
Abstract

This work presents PoliVEM, a software framework for the Virtual Element Method (VEM) in computational solid and structural mechanics. A C++17 computational core and a Python interface place one-dimensional beams, two- and three-dimensional elasticity, axisymmetric elasticity, transient diffusion, and finite-strain hyperelasticity in a common implementation. The framework stores vertex, edge, face, and cell degrees of freedom in one hierarchy, constructs the energy, strain, and $L^2$ projections from common polynomial data, and retains the consistency--stabilization split at the element level. The core separates the mesh, material, element, assembler, and solver responsibilities and combines them by composition. A new formulation supplies its projection, discrete form, and stabilization while reusing the mesh representation, degree-of-freedom numbering, boundary-condition treatment, sparse assembly, algebraic solvers, and Python binding pattern. The numerical infrastructure includes polygonal and polyhedral mesh input, higher-order entity numbering, cached projection operators, static condensation, coloured sparse assembly, linear solver selection based on the matrix structure, an incremental Newton method with line search and regularization, and explicit and implicit time integration. Three numerical experiments examine the shared implementation through polynomial reproduction, recovery after static condensation, higher-order degree-of-freedom handling, polygonal and polyhedral meshes, patch tests, stiffness spectra, and comparisons with independent finite element calculations. The results verify the common core for the beam and two- and three-dimensional elasticity formulations. They also identify the scaling of high-order polynomial bases on anisotropic cells and the memory required by sparse direct factorizations as the main limitations of the current implementation.

0.22

Mixed-Precision SEM-Based CFD Simulations on GPUs: A Taylor-Green Vortex case

cs.DC cs.SE ·2026-08-25 ·Yanxiang Chen, Manuel Münsch, Roman Iakymchuk
similarity 0.48
Abstract

Mixed precision is a promising approach for reducing the computational cost and energy consumption of Computation Fluid Dynamics (CFD) simulations, but its effectiveness depends strongly on where precision is reduced within the full simulation pipeline. In this work, we study Taylor-Green vortex case using Neko, a matrix-free CFD solver based on the spectral element method (SEM). Profiling shows that the fluid time step is not dominated by Krylov convergence alone: the velocity and pressure solvers require only a small number of iterations per step, while a substantial fraction of runtime is spent in other SEM operators and solver components. Motivated by this structure, we propose a three-level hierarchical mixed-precision control model. Two groups of configurations are evaluated in environments bounded by 64-bit floating-point (fp64) and 32-bit floating-point (fp32) precision, respectively. The fp64-bounded group identifies accuracy sensitive components and shows that SEM-focused fp32 computation is a promising direction for future optimization. The fp32-bounded group provides the main practical benefit. For the high Reynolds number case studied, selected configurations reduce both time- and energy-to-solution by about 34% relative to the fp64 baseline, while improving robustness compared with global fp32. Targeted fp16 kernel overrides are also explored, showing potential for selected operations but increased sensitivity in gradient-based quantities such as enstrophy. Overall, these results indicate that mixed-precision for matrix-free SEM-based CFD should be treated as a simulation-level control problem rather than solely as a Krylov-solver optimization.

0.26

Scaled boundary finite elements for FFT-based computational micromechanics

cs.CE math.NA ·2026-11-16 ·Flavia Gehrig, Carolin Birk, Matti Schneider
similarity 0.46
Abstract · 32 pages, 7 figures. Submitted to International Journal of Numerical Methods in Engineering

We introduce a matrix-free FFT-based solver for three-dimensional linear elastic homogenization problems discretized by the scaled boundary finite element method (SBFEM) on a voxel grid. Owing to its analytical solution in the radial direction, the SBFEM discretization is inherently softer than fully integrated voxel finite elements, whereas its displacement-based formulation remains symmetric, conforming, and supports arbitrary stiffness anisotropy. These properties make SBFEM an attractive candidate for porous and highly heterogeneous microstructures, where existing voxel-based FFT discretizations offer no generally reliable choice: Reduced-integration hexahedral elements, equivalently the rotated staggered grid discretization, may suffer from hourglass instabilities in the presence of voids, whereas fully integrated hexahedral elements are often too stiff. The proposed discretization uses hexahedral SBFEM cells on the full voxel mesh of a regular periodic grid, retaining the simplicity of a fixed-resolution voxel representation without requiring adaptive mesh coarsening. The main contribution is a preconditioner based on the homogeneous SBFEM stiffness operator. We show that this preconditioner may be applied locally in Fourier space and that the condition number of the preconditioned system is bounded by the material contrast, independently of the grid resolution. This result enables a fully matrix-free implementation of the SBFEM-discretized problem, without assembling or storing the global stiffness matrix. Numerical experiments on a short-fibre reinforced composite, a polyurethane foam and a sand-based binder jet microstructure demonstrate robust convergence and competitive accuracy compared with established voxel discretizations. In particular, SBFEM remains stable for porous microstructures, for which reduced-integration hexahedral elements become unstable.

0.29

Identifying the Shear Piezoelectric Coefficient using Physics-Informed Neural Networks under Exact Boundary and Initial Constraints

cs.LG physics.comp-phcond-mat.mtrl-sciphysics.app-ph ·2026-11-02 ·Suhas Suresh Bharadwaj
similarity 0.46
Abstract · 19 pages, 9 figures

The shear piezoelectric coefficient $e_{15}$ governs the shear-mode electromechanical coupling in piezoelectric micromachined ultrasonic transducers (PMUTs) and surface acoustic wave (SAW) devices, but measuring it typically requires destructive resonance testing on dedicated specimens. On simulated data, $e_{15}$ can instead be recovered non-destructively from sparse, noisy subsurface wavefield observations using a constrained physics-informed neural network (PINN). By building exact spatial distance functions and temporal multipliers directly into the network output, the clamped, grounded boundaries and resting initial state hold automatically, leaving the loss with only the interior equations of coupled electro-elastodynamics and the data misfit. Non-dimensional scaling brings all governing coefficients within one decade of O(1), and the setup removes the boundary and initial-condition penalty weights that soft-constraint methods must tune. In a six-way comparison (plane-strain PZT-5H, manufactured wavefield, 30 dB noise), a soft-penalty baseline with adaptive weights converges to an erroneous $e_{15}$ in four of the five runs (51.7% mean error), and fixed penalties reach an error of 0.85% only after a second-order optimization stage. The constrained formulations reach mean $e_{15}$ errors between 0.15% and 0.51% with held-out displacement errors below 1%. Within these variants, the spatial multiplier gives rapid first-order convergence, and the quadratic temporal multiplier lowers the early-time electrostatic residual by a factor of 6.8 versus a linear one. On finite-element data along one subsurface line, the full formulation recovers $e_{15}$ with 1.19% mean error at 30 dB and keeps it between 0.65% and 2.71% across a 40 to 0 dB noise sweep. Finally, training on displacements alone still recovers $e_{15}$ with mean errors of 0.45% on finite-element and 1.64% on manufactured data.

0.27

Axion: A differentiable, GPU-native finite element framework,demonstrated on phase-field fracture

cs.CE ·2026-11-18 ·Wei Wang, Meenu Krishnan U., Somdatta Goswami
benchmarkcode/data similarity 0.46
Abstract · 35 pages, 9 figures

We introduce Axion (Autodifferentiable, XLA-compiled, Implicit, On-device Numerics), a differentiable, GPU-native finite element framework written in JAX. The element kernels, Newton and Krylov iterations, bound-constrained updates, staggered coupling of fields, and the loop over load increments are expressed as a single program that is just-in-time compiled and executed on the GPU without host intervention. Consistent tangent operators are obtained by forward-mode automatic differentiation of the element residual, and derivatives of the discrete solution with respect to model parameters are obtained by differentiating the same program. Global operators are applied element by element without assembling a sparse matrix, octree mesh refinement is performed within fixed-size arrays, and a cell-based domain decomposition runs the same program on several GPUs. Phase-field fracture is implemented as the first module because it combines fine mesh resolution, bound-constrained damage, and repeated nonlinear solves over a loading history, which together make it computationally expensive. On two- and three-dimensional single-edge-notched tension benchmarks, a uniformly refined Axion computation completes faster than the corresponding adaptive FEniCSx computation. At identical discretization, the two-dimensional benchmark runs 37.9 times faster on one GPU than a FEniCSx implementation on one CPU. Strong and weak scaling efficiencies on four GPUs are 92% and 96%, respectively. Large-scale demonstrations include hydraulic fracture in a poroelastic medium (0.38M degrees of freedom), fracture of a multi-material premolar under contact loading (0.69M degrees of freedom), and a concrete gravity dam (96M degrees of freedom) on a single GPU. The implementation is available as open-source software.

0.35

Joint Higher-Order Low-Rank Tensor Decompositions for Multichannel Acoustic System Compression

eess.AS ·2026-11-05 ·Matthias Blochberger, Filip Elvander, Jan Østergaard, Toon van Waterschoot
similarity 0.45
Abstract · 15 pages, 10 figures, under peer review

Multichannel room impulse responses (RIRs) in acoustics are often long and therefore the sample count becomes large if seen as finite impulse response (FIR) filters, making storage and real-time convolution costly. Pole-zero (PZ) models are an established way to represent RIRs compactly as infinite impulse response (IIR) transfer functions. We show that a PZ model implies a low-rank canonical polyadic decomposition (CPD) of tensorized RIRs: the early reflections form a sparse rank-1 sum, while the late reverberation admits a CPD with factors determined by the poles. This motivates higher-order-tensor-based compression of RIRs via the block term decomposition (BTD), a generalization of the CPD. We propose two multichannel compression schemes: (i) a stacked multichannel block term decomposition (SMCBTD) applied to a (D+1)-mode tensor of RIRs, and (ii) a joint multichannel block term decomposition (JMCBTD) that shares subsets of factors across channels discovered by spectral clustering on factor-subspace affinity graphs. Both are optimized by an alternating higher-order orthogonal iteration (HOOI) procedure. On simulated rooms as well as measured datasets, the proposed methods achieve consistently lower reconstruction error at equal compression ratios compared to separate single-channel decompositions and a generalized low-rank approximation of matrices (GLRAM) baseline. The largest gains occur with scalar cores (i.e., CPD), supporting the PZ-to-CPD modelling link. We also find D = 3 to be a practical sweet spot, offering most of the achievable gain at moderate compute/memory cost. The compressed models enable efficient downstream multichannel convolution.

0.28