CS Paper Radar

Observer-based parameter estimation in a Darcy model towards dam internal seepage monitoring with validation on real data

Andrea Ferretti, Gildas Besançon, Emmanuel Robbe

eess.SY ·submitted 2026-11-09 13:37 UTC · v1
publishedunusual

Abstract

This paper addresses internal seepage monitoring in hydraulic infrastructures through the estimation of physical parameters in a distributed model. A physics-based approach relying on Darcy's law is adopted to describe the spatiotemporal evolution of hydraulic head within the structure. To enable real-time applicability, a Proper Orthogonal Decomposition (POD) is employed to derive a reduced-order model of the underlying partial differential equation. An Extended Kalman Filter (EKF) is then designed to perform online estimation of the hydraulic diffusivity, a key parameter related to the structural state. The proposed method is validated directly on real measurement data through a twofold approach. First, the estimated parameter is compared with the value obtained via offline batch optimization performed on the same dataset, showing consistent results. Second, the ability of the resulting model, parametrized by the estimated diffusivity, to reconstruct the observed measurements is assessed, to evaluate its suitability for seepage monitoring.

Journal ref
12th International Conference on Control, Decision and Information Technologies (CoDIT), Jul 2026, Bari (Italy), Italy. pp.2572-2577

Closest papers

Nearest neighbours by meaning across the whole index.

A hyper-reduction strategy for elastoplastic hydro-mechanical problems in partially saturated soil

cs.CE math.NA ·2026-10-27 ·Alba Muixí, Lluís Monforte, Antonio Rodríguez-Ferran, Sergio Zlotnik
similarity 0.47
Abstract

This work proposes a hyper-reduced order model for coupled hydro-mechanical simulations of elastoplastic deformation and water flow in partially saturated soils. These simulations are used to monitor and assess the safety of geotechnical structures such as earthfill dams, where calibration, uncertainty quantification and scenario analysis require solving the same transient model many times for different parameter values. The displacement and the pore pressure are approximated in a field-split reduced basis obtained by proper orthogonal decomposition, and the Galerkin-projected equations are integrated with decomposed cubature rules, one per balance equation, built with the energy-conserving sampling and weighting (ECSW) method. Each residual is split into an affine part and a nonlinear correction: the affine part is computed exactly, at negligible online cost, so that the cubature rule only needs to approximate the correction, which is localized in space. The construction is independent of the constitutive model choices and is implemented in FEniCSx by assembling the original variational forms on the small set of elements selected by ECSW. The method is tested on two- and three-dimensional dams retaining tailings and water, simulating a raise of the dam and the subsequent consolidation phase, with the friction angle, stiffness and hydraulic conductivity of the dam material and the height of the raise as varying parameters. The hyper-reduced model reproduces the displacement and pressure fields with errors below $0.5\%$ with respect to the finite element solution, achieving speed-ups of up to $43\times$ in two dimensions and $77\times$ in three. These performance gains grow with the extent of the plastic yielding, and the selected elements concentrate in the plastified and unsaturated zones, whose size is set by the physics rather than by the mesh resolution.

0.25

A Geometry-Informed Neural Operator surrogate of LISFLOOD-FP for rapid pluvial-fluvial flood forecasting: the case of Forlì, Italy

cs.LG physics.geo-ph ·2026-11-02 ·Samuele Maria Garofalo, Fabio Limardo, Simonetta Bodojra, Mohammad Amin Nabian, Mehdi Taghizadeh
similarity 0.46
Abstract · 16 pages, 12 figures, 3 tables

Physically based two-dimensional hydraulic models are too slow for real-time inundation forecasting and large ensembles. We present a time-dependent geometry-informed neural operator (GINO) surrogate of LISFLOOD-FP for the municipality of Forlì (Italy), severely affected by the May 2023 Emilia-Romagna floods. The surrogate is designed for an operational setting in which only river stage gauges and rain gauges are available. A reproducible pipeline turns public regional observations into a physically based training set: each river inflow is driven by the first stage gauge downstream of it through a calibrated water-surface boundary condition, and rain enters as SCS-CN effective rainfall. The surrogate is an autoregressive GINO trained on 216 simulations of 24 observed events with scaled forcing. It predicts volume-conserving polygon-mean depths on an exposure-based Voronoi mesh of 659 nodes, with a 20 min step over 72 h. The surrogate is tested on 38 independent observed events that it never saw during training. On these events it reaches a critical success index (CSI) of 0.934 at 0.05m and 0.844 at 0.3 m, a depth RMSE of 0.008m and an $R^2$ of 0.984 for maximum-depth maps. On one NVIDIA A10G GPU a 72-h forecast takes 1.7 s instead of 55 s with LISFLOOD-FP, and a 50-member ensemble, computed in a single batched rollout, takes 6.2 s instead of about 46 min, which makes probabilistic flood forecasting practical. These results show that neural-operator surrogates can deliver accurate pluvial-fluvial flood forecasts driven by river stage for operational early warning.

0.22

A KKL Observer Perspective on Reservoir Computing

eess.SY cs.LGmath.DSmath.OC ·2026-10-03 ·Anastasia Bizyaeva, Fernando Castaños, Jaime A. Moreno
theory similarity 0.46
Abstract · 8 pages

Reservoir computing (RC) is a machine learning technique for data-driven modeling of dynamics for forecasting and control, primarily studied in computer science and physics literature with promising applications in neural network learning, physical computing, and neuroscience. Why reservoirs learn and how to choose good reservoir architectures are considered important open questions. We show that the RC problem is mathematically an extension of a classic problem in systems and control theory, the Kazantzis-Kravaris-Luenberger (KKL) observer design problem. As a consequence, many of the questions considered open for RC stand to benefit from a large body of theory in the mature KKL literature, non-exhaustively including on questions of embedding, transverse stability, local and global uniqueness guarantees, and effective data-driven solution constructions. Elaborating on this connection, we show that the surprising forecasting ability of reservoirs is in fact a direct consequence of the well-known observer internal model principle, derive an upper bound on the prediction error over a fixed forecast horizon, and provide a partial explanation for why linear readout training in RC works reasonably well. This work illustrates how classical ideas from systems and control can provide strong theoretical backing and open new questions for modern machine learning methods.

0.44

Modeling and Estimation of a Towed Marine System

cs.RO ·2026-11-09 ·Josef Matouš, Simon Hoff, Damiano Varagnolo, Marius S. Rundhovde, Kristin Y. Pettersen +1 more
similarity 0.45
Abstract · preprint submitted to Ocean Engineering, 23 pages (highlights + 22p manuscript), 12 figures

This paper addresses the modeling and state estimation of a towed marine system consisting of two autonomous surface vehicles (ASVs), a pair of umbilical cables, towfish, and a trailing loop cable. Inspired by the existing literature, we employ a lumped-mass modeling approach for the cables and towfish, capturing the essential dynamics while maintaining computational tractability. A Lyapunov-based analysis is conducted to verify the stability and convergence properties of the proposed model. Building on this model, we propose two state estimation methods, namely a reduced-order observer and a perfect-measurement extended Kalman filter (PMEKF), using only the measurements from the ASVs' onboard sensors. Numerical simulations and experimental results are provided to validate the effectiveness of the proposed methods.

0.36

Practical Algebraic Parameter Estimation for Noisy Data via Gaussian Process Regression

eess.SY cs.MSmath.OC ·2026-09-24 ·Oren Bassik, Alexander Demin, Alexey Ovchinnikov
benchmark similarity 0.45
Abstract

Parameter estimation for ordinary differential equation (ODE) models is a fundamental task that is often complicated by the limitations of conventional optimization-based methods. In theory, differential-algebraic approaches offer an appealing alternative: they reduce the problem to polynomial system solving and do not require user-supplied initial guesses for parameter values. In practice, however, algebraic methods have been limited by their sensitivity to measurement noise, because they require accurate derivatives of observed outputs. In this work, we integrate Gaussian Process Regression (GPR) into the differential-algebraic method and derive a first-order error analysis in terms of noise level and algebraic sensitivity. We evaluate the method across several noise levels on a benchmark of 25 dynamical systems arising in applications including mechanical engineering and systems biology. The proposed method achieves the highest aggregate performance among the methods considered, recovering all sought parameter values and initial conditions to within 10% relative error in 88.5% of runs. These results demonstrate that robust derivative estimation can make differential-algebraic parameter estimation practical for dense, noisy synthetic data while retaining key advantages of the algebraic formulation.

0.35

Sensor placement for real-life water distribution networks, ensuring observability under uncertainties

eess.SY ·2026-11-09 ·Jarne J. H. van Gemert, Valentina Breschi, Claudia Quintiliani, Doekle R. Yntema, Karel J. Keesman +1 more
published similarity 0.44
Abstract · Accepted for WDSA/CCWI 2026

Leakage detection in water distribution networks (WDNs) is crucial for limiting water losses. However, effective detection strongly depends on sensor availability and placement. Most existing sensor placement methods rely on extensive simulations or precise knowledge of hydraulic parameters, which are often uncertain in practice. In this paper, we propose using a scalable sensor placement framework based on structural observability that depends only on the network topology and the underlying pressure-flow interconnection structure. The approach guarantees structural observability independently of hydraulic parameters, and is therefore robust to parametric uncertainties, assuming that the network topology is correctly specified. The method is computationally efficient and its performance is demonstrated on several real-life WDNs provided by Brabant-Water. While the framework ensures full network observability, the required number of sensors can be high in large and cyclic networks, which may limit applicability in real-life and motivates future work on relaxed observability guarantees for sensor placement.

0.38

Deep Bayesian Filtering for Nonlinear Structural System Identification: A Tutorial on Structural and Physical Inductive Biases

cs.LG cs.CEstat.ML ·2026-10-27 ·Wei Liu, Konstantinos Vlachas, Eleni Chatzi
benchmark similarity 0.44
Abstract

Nonlinear structural system identification remains challenging when governing physics is only partially known and measurements are sparse. Deep Bayesian filtering addresses these challenges by combining learnable dynamical representations with probabilistic state-space models, physical inductive biases, and uncertainty-aware inference. This paper presents, for the first time, a unified tutorial treatment of deep Bayesian filtering for nonlinear structural system identification, connecting model formulation, learning, posterior inference, and evaluation. Amortized variational inference and differentiable Kalman filtering are introduced as complementary strategies within this broader framework. The Deep Markov Model (DMM) provides a data-driven reference, while the Physics-guided Deep Markov Model (PgDMM) and Neural Extended Kalman Filter (Neural EKF) serve as illustrative instances through which methodological choices and their implications are examined. Dynamic state estimation and joint state and parameter estimation are demonstrated on a three-dimensional shear-frame benchmark with hysteretic Bouc-Wen connections and sparse acceleration measurements. The comparative analysis yields new observations concerning the relationships among reconstruction accuracy, predictive fidelity, physical interpretability, and estimation robustness. Physical structure improves latent-state interpretability without necessarily ensuring faithful predictive dynamics, while comparable typical reconstruction accuracy can conceal substantial differences in estimation robustness. These findings motivate practical guidelines for model construction, training, and evaluation that distinguish reconstruction, forecasting, state recovery, and parameter identification. The tutorial concludes by outlining challenges in uncertainty calibration, identifiability, and validation on real structures.

0.27

MOSAIC-SV: Real-Time Adaptive Identification of Vessel Dynamics for the Control and Deployment of Aquatic Robots

cs.RO ·2026-10-02 ·Wensen Liu, Jerry Peng, Shravani Vedagiri, Aaron M. Johnson
similarity 0.44
Abstract

Model-based control of an aquatic robotic platform depends on a hydrodynamic model that is costly to identify and specific to the hull, payload, and conditions it was measured in. Here, we present MOSAIC-SV, a deployable real-time adaptive dynamics identification and control system that identifies a control-sufficient dynamics model from a spec-sheet engineering prior, without dedicated identification trials, and re-estimates it at every control step of a closed-loop mission while the controller plans on it. A physically admissible unscented Kalman filter re-estimates hydrodynamic, disturbance, and actuator parameters at every control step of the closed-loop mission; while a command-dependent consider projection withholds corrections the current command cannot attribute between actuator effectiveness and external force; and a model predictive path integral controller plans on the current estimate. In simulation on a CyberShip II plant, MOSAIC-SV recovers the transit performance of the calibrated model under static mismatch and transient changes, and stays within 20% of its own transit time at the unscaled prior when its inertia or damping prior is wrong by an order of magnitude. In on-water field trials on the Blue Robotics BlueBoat, a twin-thruster catamaran, MOSAIC-SV transits at least 25% faster and predicts its own motion with at least 56% less error than its frozen engineering prior, including under an unmodeled payload. The same MOSAIC-SV system concept was also feasibly deployed on a 6.3-tonne dual outboard monohull.

0.23