CS Paper Radar

Component-wise hyperreduction for nonlinear solid mechanics problems

Stephan Ritzert, Jannick Kehls, Erik Faust, Hagen Holthusen, Stefanie Reese, Tim Brepols

cs.CE ·submitted 2026-08-19 12:41 UTC · v1

Abstract

Hyperreduced nonlinear solid-mechanics components can be generated offline and reused as transferable building blocks across different assemblies, boundary conditions, meshes, material parameters, and constitutive models. We use proper orthogonal decomposition (POD) and energy conserving sampling and weighting (ECSW) on the component level and connect the substructures by mortar mesh tying. The POD modes and the ECSW weights and elements are computed offline from simulations of single components and the finite rigid body motions are treated by 12 additional rigid body modes per substructure. The numerical examples demonstrate errors below 1 \% for large quasi-static assemblies while evaluating less than 10 \% of the elements. The same component bases and ECSW elements are successfully reused for finite-strain viscoelastic dynamics, although they were trained only on elastic Neo-Hookean component simulations. These results indicate that component-wise hyperreduction can provide reusable reduced building blocks for modular nonlinear solid-mechanics simulations.

Closest papers

Nearest neighbours by meaning across the whole index.

PoliVEM: a Python-driven virtual element framework for computational solid mechanics

cs.SE ·2026-09-26 ·Paulo Akira F. Enabe, Rodrigo Provasi
similarity 0.63
Abstract

This work presents PoliVEM, a software framework for the Virtual Element Method (VEM) in computational solid and structural mechanics. A C++17 computational core and a Python interface place one-dimensional beams, two- and three-dimensional elasticity, axisymmetric elasticity, transient diffusion, and finite-strain hyperelasticity in a common implementation. The framework stores vertex, edge, face, and cell degrees of freedom in one hierarchy, constructs the energy, strain, and $L^2$ projections from common polynomial data, and retains the consistency--stabilization split at the element level. The core separates the mesh, material, element, assembler, and solver responsibilities and combines them by composition. A new formulation supplies its projection, discrete form, and stabilization while reusing the mesh representation, degree-of-freedom numbering, boundary-condition treatment, sparse assembly, algebraic solvers, and Python binding pattern. The numerical infrastructure includes polygonal and polyhedral mesh input, higher-order entity numbering, cached projection operators, static condensation, coloured sparse assembly, linear solver selection based on the matrix structure, an incremental Newton method with line search and regularization, and explicit and implicit time integration. Three numerical experiments examine the shared implementation through polynomial reproduction, recovery after static condensation, higher-order degree-of-freedom handling, polygonal and polyhedral meshes, patch tests, stiffness spectra, and comparisons with independent finite element calculations. The results verify the common core for the beam and two- and three-dimensional elasticity formulations. They also identify the scaling of high-order polynomial bases on anisotropic cells and the memory required by sparse direct factorizations as the main limitations of the current implementation.

0.22

Dimensional hyperreduction of nonlinear finite element models via empirical cubature with manifold-adaptive weights

cs.CE math.NA ·2026-09-02 ·Joaquín A. Hernández, S. Ares de Parga, Riccardo Rossi
benchmark similarity 0.62
Abstract · 49 pages, 22 figures, 6 tables

Nonlinear-manifold reduced-order models for parametrized finite element problems can achieve substantial compression both in the number of generalized (latent) coordinates and, through sampling-and-weighting hyperreduction, in the number of sampled elements/integration points. Yet current sampling-and-weighting approaches employ weights that remain fixed over the solution manifold. We contend that this restriction leaves hyperreduction potential untapped: allowing the weights to vary continuously and nonlinearly with the latent coordinates can further decrease the number of sampled spatial entities. To exploit this possibility, we propose the Manifold-Adaptive-Weight Empirical Cubature Method (MAW-ECM). Starting from a feasible fixed-weight ECM rule, a greedy pruning strategy removes sampled entities through convex quadratic weight-redistribution problems enforcing local conditions and positivity. The method is assessed on two nonlinear benchmarks: homogenization of a metamaterial unit cell exhibiting negative incremental stiffness, and a history-dependent continuum-damage problem. In both cases, the nonlinear manifold is constructed from an initial linear compression followed by an input-informed identification of the latent coordinates as general linear combinations of the retained modal amplitudes, incorporating graph information when relevant to seek the intrinsic dimensionality of the solution manifold. We show that combining the nonlinear-manifold representation with MAW-ECM reduces the number of sampled integration points by more than two orders of magnitude relative to the corresponding standard linear reduced model. Relative to the fixed-weight manifold models alone, the adaptive weights eliminate approximately 80% of the remaining points in the homogenization benchmark and more than 97% in the damage benchmark, while essentially preserving their accuracy.

0.43

Hyperreduction accelerates finite element model updating for the discovery of neural materials

cs.CE cs.AI ·2026-10-22 ·Hagen Holthusen, Matthias Knipper, Kevin Linka
similarity 0.60
Abstract · 42 pages, 23 figures, 1 table

Finite element model updating is among the most general approaches to discover constitutive models from structural experiments: since the displacement field is computed rather than measured, it accommodates arbitrary geometries, boundary conditions, and sparse or noisy data. However, every loss evaluation requires a nonlinear finite element solve per load step, and training neural materials requires many such evaluations. Intrusive model order reduction lowers this cost while retaining boundary conditions and variational structure. How can a reduced model remain accurate while the network weights change at every training step? We combine proper orthogonal decomposition and energy-conserving sampling and weighting with adjoint sensitivities of the reduced model, and adapt both the trial space and the sampled elements along the optimization path. The constitutive law is a polyconvex neural network: a logarithmic normalization term, together with a zero-anchored input convex architecture and a growth term, renders the energy polyconvex, coercive, and non-negative by construction, independent of the trained weights. We demonstrate the approach on two experimental datasets and one synthetic three-dimensional example. For a two-phase specimen, training time decreases from nine hours to 41 minutes compared with a full-order identification, without loss of accuracy. In the three-dimensional example, six modes replace 48 672 degrees of freedom, 116 of 15 625 elements suffice to evaluate the internal forces, and training takes 13 minutes. In all cases, the identified material reproduces the measured reaction force and predicts the displacement field from the force alone. Hyperreduction makes the discovery of neural materials from structural data affordable while retaining the advantages of finite element model updating.

0.28

Total Deformation-based MPM for Perfectly Elastic Solid Simulation with Strong Deformations

cs.GR ·2026-10-27 ·Timna Böttcher, Rick Ridder, Jan Bender
similarity 0.57
Abstract

We present a new MPM-based solver for perfectly elastic solids, which can recover from strong deformations and naturally allows contact handling. Typical MPM solvers suffer from numerical fracture, where objects break apart even when no plasticity is included in the elasticity model. Previous approaches for perfectly elastic solids solve this by computing forces on a fixed grid in the reference configuration. However, this makes them incompatible with standard collision handling methods. We instead propose a method for deformable solid simulation without numerical fracture, that still computes elastic forces on the current grid. Our method can easily include grid-based collision handling, as commonly used in MPM frameworks. Additionally, we compute the deformation directly from the particle positions and a fixed reference grid, without any updates based on velocity gradients. This facilitates the inclusion of particle-level collision handling and zero-energy mode suppression, which counteracts artifacts from non-linear deformations. As a result, we can efficiently simulate complex scenarios of elastic objects undergoing large deformations, including contact.

0.24

Love Handles: Decimation for Deformation Handles with Compact Support and Low Memory Footprints

cs.GR ·2026-08-18 ·David IW Levin, Paul Kry, Kartic Subr, Ryan Schmidt, Etienne Vouga +1 more
similarity 0.55
Abstract

Estimating the deformation of solids via physical simulation is an important problem spanning fields such as computer animation, engineering and robotics. Such simulations are computationally expensive and scale poorly when the representation of an object is refined by increasing the level of discretization. Reduced Order Methods (ROM) offer computational savings by decreasing the number of degrees of freedom, for example by using \emph{handles} that control groups of vertices. We present the first decimation-based algorithm for computing a sparse, compactly supported set of deformation handles. The crux of our method utilizes iterative algebraic simplification to optimize handle deformation to match any input deformation, such as linear vibration modes. This applies to any volumetric input mesh, including those with high genus or porous features, since we do not alter the geometry. We also devise an efficient algorithm to compute and update compact supports and their associated weights. We leverage compact support to develop an efficient, reduced-cubature computation scheme. Once optimized, our handles offer a memory-efficient solution while enabling real-time elastodynamics simulation of complex geometry. We show real-time performance on a variety of tetrahedral meshes with up to 796,623 tetrahedra.

0.23

HGTO: A Unified Graph-Based Physics-Informed Formulation for Structural Topology Optimization

cs.LG ·2026-09-14 ·Kangzheng Liu, Uday Kumar Punna, Leixin Ma
similarity 0.54
Abstract

Density-based topology optimization is typically structured as a nested sequence of material updates, structural analyses, and sensitivity assessments. While neural density parameterization and dual-field physics-informed approaches provide data-free alternatives, most existing methods represent density and displacement as coordinate fields and make limited use of the discrete relationships inherent in the finite element mesh. The present study introduces HGTO, a unified graph-based formulation that extends complete neural topology optimization from coordinate space to finite-element graph space. Element densities are parameterized on the element graph derived from the mesh, and the structural state is determined on the corresponding node--element hypergraph. Finite element kinematics, numerical quadrature, constitutive response, and force assembly remain explicitly defined operations within the differentiable computation. The material field and equilibrium state are therefore coupled through a common finite-element incidence structure. Numerical studies show compliance comparable to conventional density-based optimization at substantially lower computational cost than a representative coordinate-based dual-field neural method. The same coupled formulation accommodates high-resolution and irregular meshes, three-dimensional structures, finite deformation, and elastoplastic response.

0.46

A mesh-based neural energy method for the simulation of heterogeneous composites

cs.CE cs.LG ·2026-10-07 ·Pius J. M. Wichmann, Stefan Hildebrand, Sandra Klinge
benchmark similarity 0.53
Abstract

Modeling heterogeneous materials remains a challenge for physics-informed neural networks such as the deep energy method (DEM). The DEM and its variants, here collectively referred to as the neural energy method (NEM), offer a differentiable variational framework. However, their conventional collocation-based implementation (C-NEM) often suffers from physically inadmissible displacement oscillations, integration errors, and high computational costs from automatic differentiation. This work introduces the mesh-based neural energy method (M-NEM), extending the NEM through a mesh-based discretization of the displacement field. By interpolating nodal displacements via shape functions, the M-NEM imposes a kinematic constraint that suppresses oscillations. Furthermore, the method replaces automatic differentiation with algebraic shape function derivatives for strain computation and employs high-order Gaussian quadrature for accurate energy integration. On a directly comparable benchmark problem, the M-NEM reduces stress errors by up to three orders of magnitude relative to the C-NEM while being one to two orders of magnitude faster. On two further benchmarks involving extreme stiffness contrasts, only the M-NEM converges. A comparative study of neural architectures reveals that radial basis function neural networks (RBFNNs) yield optimal performance within the M-NEM, resolving sharp gradients at material interfaces with higher accuracy than multi-layer perceptrons (MLPs) with random Fourier feature (RFF) mapping and faster convergence than Kolmogorov-Arnold networks (KANs).

0.22

Scaled boundary finite elements for FFT-based computational micromechanics

cs.CE math.NA ·2026-11-16 ·Flavia Gehrig, Carolin Birk, Matti Schneider
similarity 0.53
Abstract · 32 pages, 7 figures. Submitted to International Journal of Numerical Methods in Engineering

We introduce a matrix-free FFT-based solver for three-dimensional linear elastic homogenization problems discretized by the scaled boundary finite element method (SBFEM) on a voxel grid. Owing to its analytical solution in the radial direction, the SBFEM discretization is inherently softer than fully integrated voxel finite elements, whereas its displacement-based formulation remains symmetric, conforming, and supports arbitrary stiffness anisotropy. These properties make SBFEM an attractive candidate for porous and highly heterogeneous microstructures, where existing voxel-based FFT discretizations offer no generally reliable choice: Reduced-integration hexahedral elements, equivalently the rotated staggered grid discretization, may suffer from hourglass instabilities in the presence of voids, whereas fully integrated hexahedral elements are often too stiff. The proposed discretization uses hexahedral SBFEM cells on the full voxel mesh of a regular periodic grid, retaining the simplicity of a fixed-resolution voxel representation without requiring adaptive mesh coarsening. The main contribution is a preconditioner based on the homogeneous SBFEM stiffness operator. We show that this preconditioner may be applied locally in Fourier space and that the condition number of the preconditioned system is bounded by the material contrast, independently of the grid resolution. This result enables a fully matrix-free implementation of the SBFEM-discretized problem, without assembling or storing the global stiffness matrix. Numerical experiments on a short-fibre reinforced composite, a polyurethane foam and a sand-based binder jet microstructure demonstrate robust convergence and competitive accuracy compared with established voxel discretizations. In particular, SBFEM remains stable for porous microstructures, for which reduced-integration hexahedral elements become unstable.

0.29