CS Paper Radar

Explicit Frictional Contact Modeling in Neural Garment Simulation

Thanh-Nguyen Truong, Vu-Hoang Tran, Ching-Chun Huang

cs.CV cs.GRcs.LG ·submitted 2026-10-24 06:41 UTC · v1
published

Abstract

Graph neural networks (GNNs) simulate garments efficiently through physics-based self-supervision, but leave body-garment friction implicit or inside training energies, with no friction coefficient $μ$ to set at inference; retraining the tested GNNs with a coefficient-specific friction term barely responds to $μ$. Optimization-based solvers decide each contact's stick-slip state from the reaction that governs it, but only by re-optimizing the garment state at every step; a friction term in a one-pass training objective acts as a fixed-weight penalty on sliding, and the trained weights apply no per-contact Coulomb condition at inference. We therefore resolve friction explicitly after prediction: a Modular Contact Operator, attached to a frozen predictor without retraining or an iterative solve, estimates the normal load, applies a closed-form Coulomb correction along a path across body triangles, and propagates the induced motion through the cloth as a linearized membrane wave. On HOOD and ContourCraft, it raises sticking and lowers slip monotonically in $μ$, tracking a reference solver's response while coefficient-specific retraining stays flat, with low penetration and reference-consistent stretching at an eighth of the solver's runtime.

Comment
WACV 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Learnable Persistent Wrinkle Formation in Cloth Simulation

cs.GR ·2026-09-12 ·Deshan Gong, Ningtao Mao, Xiaoyuan Yang, Xinyu Lu, He Wang +1 more
publishedcode/data similarity 0.64
Abstract · A paper accepted in the SIGRRAPH Asia 2026 conference

The mechanical memory of fabrics often leads to persistent wrinkles, which reflect key physical properties and habitual wear patterns. Simulating these wrinkles accurately is essential for visual plausibility in digital garments, yet no dedicated approach exists for inferring the parameters that govern their formation due to the lack of precise datasets and estimation methods. We introduce Fabric-101, an inclusive, accurate, and extendable fabric dataset comprising over 101 common fabrics following textile standards. Unlike existing datasets, it captures three physically distinct deformation components (i.e., self-recoverable (elastic), recoverable (friction-driven), and unrecoverable (plastic)), from cyclic loading-unloading measurements. Building on this data, we propose a differentiable cloth simulator combining an elasto-plastic model with friction, designed to capture recoverable and unrecoverable wrinkle formation. Our simulator is differentiable and uses adjoint method to learn fabric physical parameters from the measured hysteresis curves, learning fabric-specific wrinkle behaviors. Through extensive experiments, we demonstrate that our model reproduces persistent wrinkles that are visually and physically similar to real fabrics across diverse materials and motions. Dataset and code are available in https://github.com/GongDeshan/Fabric_101_for_Wrinkles.

0.48

ClothCode: Generative Modeling for Garment State Estimation and Dynamics Prediction

cs.RO cs.CV ·2026-10-09 ·Yingdong Ru, Lipeng Zhuang, Shiyu Fan, Zhuo He, Florent P. Audonnet +1 more
hot direction similarity 0.63
Abstract

We introduce ClothCode, a unified generative framework for garment state estimation and action-conditioned dynamics prediction in a shared discrete configuration space. A material-aligned tokenizer encodes garment configuration as residual vector-quantized patch tokens, while task-specific Masked Generative Transformers predict these tokens through parallel confidence-guided refinement. Across three garment templates, ClothCode reduces mean displacement error by 26.6% for state estimation and 37.0% for dynamics prediction relative to the strongest baselines. Dynamics prediction requires only 16.7 ms per window, compared with 556.2 ms for diffusion. Integrated into the same model-predictive controller, ClothCode improves real-world folding and flattening success from 56.7% to 78.9%. Further results and videos are available at: https://anonymous.4open.science/r/ClothCode-DE32

0.36

MeshPriorDiT: Hierarchical Modeling for Action-Conditioned Cloth Dynamics

cs.RO ·2026-08-27 ·Zihang Wang, Jianming Hu, Shang Su, Hao Huang, Mengkai Shi +2 more
similarity 0.62
Abstract

Action-conditioned cloth dynamics prediction requires both locally plausible deformation and long-range coordination. Existing approaches largely follow two paradigms. Mesh-based GNNs capture local physical responses through material connectivity. However, their finite message-passing range limits coordination between topologically distant regions, while autoregressive rollouts tend to accumulate prediction errors. Transformer-based dynamics models capture long-range interactions through global attention, but often operate without explicit material connectivity and must learn local topological responses directly from data. We propose MeshPriorDiT, a hierarchical dynamics model that decomposes future cloth motion into a structured mesh prior and a generative residual. An action-conditioned mesh GNN first predicts multi-step vertex displacements, yielding a reference trajectory that respects material topology and grasp constraints. Conditioned on historical states, planned actions, and the mesh prior, a Residual DiT then uses conditional flow matching to jointly generate the residual motion not captured by the prior. The generated residual is further rescaled and decoded using material adjacency to coordinate corrections across neighboring vertices. We evaluate MeshPriorDiT on 15-step autoregressive rollouts across three cloth manipulation tasks. Averaged over the three tasks, MeshPriorDiT reduces average Global MSE by 43.42% relative to the GNN-Only baseline and by 75.03% relative to the DiT-DDPM baseline, while maintaining a favorable Edge-strain MSE comparable to that of GNN-Only.

0.17

Continuous-Time Cloth Dynamics with Physics-Informed Neural ODEs

cs.LG cs.RO ·2026-10-09 ·Yingdong Ru, Lipeng Zhuang, Zhuo He, Gerardo Aragon Camarasa
similarity 0.61
Abstract

We present ContinuousCloth, a continuous-time, physics-informed neural solver for deformable cloth dynamics that enforces a spring--mass ODE within a neural trajectory model. Unlike classical time-stepping simulators that return trajectories only on a discrete integration grid, ContinuousCloth supports querying at arbitrary timestamps and computing displacement, velocity, and acceleration via automatic differentiation. We evaluate ContinuousCloth along two dimensions. In a physics-only setting, ContinuousCloth achieves trajectory accuracy comparable to high-precision solvers across six diverse boundary-condition scenarios while reducing runtime by up to 17.4 times. When fused with sparse and noisy observations, the spring--mass ODE acts as a strong inductive bias for downstream tasks: interpolation and parameter estimation. That is, ContinuousCloth reduces interpolation error by 7.3 times over a data-only neural baseline in simulation and 2.4 times on real-world cloth sequences, and achieves 2.6 times lower parameter error than a differentiable-solver baseline under high-noise conditions, demonstrating consistent robustness under realistic measurement imperfections.

0.30

Real-Time Self-Penetration Repair for Skinned Characters with Soft Contact Budgets

cs.GR ·2026-11-06 ·Yifei Zhu
similarity 0.59
Abstract · 4 figures, 9 tables

Motion that is plausible on one body can penetrate another after a change in shape, and motion models can produce self-penetration on their native characters. We present a training-free post-process that reduces these artifacts through pose correction followed by bounded skin compression. The module attaches to any motion model whose native character and output character have compatible character packs, without access to model internals. Each pack is built offline from the rig and skin without training. A vertex-level pose layer solves a local quadratic program in plain C on one CPU core, and a stateless contact deformer acts on the host's final skinned mesh. A part-dependent soft-tissue budget allocates correction between pose and skin through a static convention. Source penetration contributes no extra allowance; optional cloth thickness and compliance modify the pose layer's collision surface. Operation is causal or uses a short buffered lookahead, with frame-exact pass-through at the native interface for clean, inactive frames in the zero state. Across 320 unseen clips and 3 body shapes, the fraction of frames with hand-torso depth above 20 mm falls from 15.53% for copied motion to 0.00%, with final maximum depth 9.3 mm over every frame. Mean pose and skin costs are 1.11 and 1.18 ms, respectively, and their sum of 2.29 ms is a sub-frame processing cost. The median joint-velocity high-frequency ratio relative to copied target motion is 1.008.

0.33

DiT-Garment: Garment Dynamics with Diffusion Transformers

cs.CV ·2026-09-16 ·Antoine Dumoulin, Laurence Boissieux, Joao Regateiro, Pierre Hellier, Stefanie Wuhrer
code/data similarity 0.59
Abstract

We present DiT-Garment to model dynamic 3D clothing over human body models in arbitrary motion. Unlike existing methods, DiT-Garment can animate garments with unseen designs and physical materials, while allowing for direct inference of deformations for any target pose. To achieve this, we leverage a 2D diffusion transformer architecture to learn 3D deformations in a 2D UV-space. As the result is non-deterministic, our generative model learns the distribution of possible outcomes. The template garment is represented as a 3D triangle mesh spatially aligned with a 3D human body model in a standardized pose. To work with different garment designs without the need of a common template or complex graph convolution operations, the diffusion transformer is conditioned on a 3D position map of the template, represented in UV-space, which allows to implicitly learn a deformation of the 3D space around the body in standard pose. Further conditioning on body motion and physical parameters allows to physically ground the model. We quantitatively and qualitatively evaluate DiT-Garment on both synthetic and real data. While only trained on synthetic simulations of automatically generated cloth designs, our method generalizes to captured and artist-made garment designs. Code and data are available for research purposes at https://dumoulina.github.io/dit-garment/.

0.22

FEM-Validated Real-Time Modelling of Soft Tactile Deformation

cs.RO ·2026-10-12 ·Silvia Terrile, Kaichen Shi, Taejun Kwon, Jiseok Lee, Nathan Lepora +3 more
similarity 0.59
Abstract

Accurate modelling of soft tactile sensors remains difficult because finite element methods (FEM) are computa- tionally expensive, while real-time simulators often lack fidelity for hyperelastic deformation. Large physical datasets are also impractical to collect because repeated testing can damage fragile sensors. We present a data-efficient framework that combines limited real-world validation, high-fidelity FEM, and graph neural networks (GNNs) for accurate real-time prediction of two-dimensional tactile deformation in a planar soft tactile structure. The key idea is to decouple validation from training: 82 camera-tracked contact configurations are used only to tune and validate an ANSYS FEM model, which then generates 768 synthetic contact scenarios for GNN training. We evaluate both forward prediction from marker deformation to contact localisation and inverse inference from contact configuration to marker deformation. The validated FEM achieves sub-0.5 mm error in more than 90% of validation cases, while the learned GNN surrogate reaches a mean absolute error of 0.32 mm with millisecond-scale inference, compared with minute-scale FEM simulation. Models trained entirely on synthetic FEM data retain sub-millimetre accuracy on real measurements from the 2D tactile structure, demonstrating strong sim-to-real transfer within the tested planar setting. We further integrate the learned model into a real-time visualisation pipeline, enabling rapid deformation prediction for virtual prototyping and simulator-based design exploration without extensive physical testing.

0.24

DiffContact: Differentiable Contact Dynamics for Policy Learning and Contact-Implicit Trajectory Optimization

cs.RO ·2026-10-26 ·Gijeong Kim, Seungbin Oh, Dongyun Kang, Hae-Won Park
code/data similarity 0.58
Abstract · Submitted to IEEE Transactions on Robotics (T-RO)

This paper proposes DiffContact, a smooth analytic gradient for frictional contact, and applies it to policy learning and contact-implicit trajectory optimization for legged locomotion. The exact contact sensitivity is available in closed form but describes changes within the current contact mode, providing no first-order information toward neighboring contact modes. The proposed gradient replaces this sensitivity only in the backward pass, leaving the hard-contact forward solve unchanged and the realized rollout feasible. A central-path relaxation of the de Saxcé-corrected second-order-cone complementarity problem for Coulomb friction smooths the conditions defining the separating, clamping, and sliding modes. The relaxed sensitivity is evaluated at a point on the central path obtained by a Newton iteration initialized from the hard-contact solution. The sensitivity remains continuous through contact-mode transitions and converges to the exact sensitivity as the relaxation vanishes. Using 100,000 samples and less than 2 min of training on a desktop PC, policy learning with the proposed gradient produces a policy that transfers to hardware without fine-tuning. On hardware, the robot under a trotting policy withstands pushes and traverses debris and slippery ground. In trajectory optimization, the proposed gradient reaches contact-rich solutions missed by exact and Signorini-relaxed gradients. Project page: https://diffcontact.github.io

0.62