CS Paper Radar

Real-Time Self-Penetration Repair for Skinned Characters with Soft Contact Budgets

Yifei Zhu

cs.GR ·submitted 2026-11-06 16:40 UTC · v1

Abstract

Motion that is plausible on one body can penetrate another after a change in shape, and motion models can produce self-penetration on their native characters. We present a training-free post-process that reduces these artifacts through pose correction followed by bounded skin compression. The module attaches to any motion model whose native character and output character have compatible character packs, without access to model internals. Each pack is built offline from the rig and skin without training. A vertex-level pose layer solves a local quadratic program in plain C on one CPU core, and a stateless contact deformer acts on the host's final skinned mesh. A part-dependent soft-tissue budget allocates correction between pose and skin through a static convention. Source penetration contributes no extra allowance; optional cloth thickness and compliance modify the pose layer's collision surface. Operation is causal or uses a short buffered lookahead, with frame-exact pass-through at the native interface for clean, inactive frames in the zero state. Across 320 unseen clips and 3 body shapes, the fraction of frames with hand-torso depth above 20 mm falls from 15.53% for copied motion to 0.00%, with final maximum depth 9.3 mm over every frame. Mean pose and skin costs are 1.11 and 1.18 ms, respectively, and their sum of 2.29 ms is a sub-frame processing cost. The median joint-velocity high-frequency ratio relative to copied target motion is 1.008.

Comment
4 figures, 9 tables

Closest papers

Nearest neighbours by meaning across the whole index.

ReContact: Reconstruct and Retarget Human Contacts from Video for Contact-Rich Humanoid Manipulation

cs.RO ·2026-11-02 ·Zhongkai Gu, Yang Liu, Wei Zhu, Mitsuhiro Hayashibe
similarity 0.63
Abstract

Contact transitions allow humanoid robots to redistribute object support across the whole body, enabling manipulation beyond hand-only grasps. Human videos provide a scalable source of such transitions for robots to learn from. However, body occlusion disrupts object pose tracking and corrupts retargeted motion. Moreover, accurately reproducing the object trajectory does not ensure that the robot applies stabilizing forces at the intended contacts, risking slips or drops in later phases. To address these challenges, we propose ReContact, which reconstructs and retargets human-object interactions through an object-centric contact plan. The plan specifies contact phases, contact pairs, anchors, pressing directions, and sticking or sliding modes. Contact priors stabilize object pose reconstruction through occlusion. A residual policy over a frozen whole-body tracker is rewarded for making contact at planned anchors with forces aligned to the specified directions. In simulation, on a thigh-supported regrasp task, ReContact achieves the planned two-palm bottom hold in 83.5 of episodes over three training seeds, versus 0.16% for the best adapted baseline. One policy trained on 247 references re-solved for new placements raises in-workspace tube-transfer success from 20.4% (source reference only) to 97.8%. On a real Unitree G1, policies execute seven contact-rich manipulation and two loco-manipulation tasks.

0.08

Skinned Motion Retargeting via Artifact-driven Kinematic Prior Refinement

cs.GR ·2026-09-06 ·Seokhyeon Hong, Chaelin Kim, Inseo Jang, Soojin Choi, Junyong Noh
top venuecode/data similarity 0.61
Abstract · Accepted SIGGRAPH Asia 2026 (Journal Track); Project page https://seokhyeonhong.github.io/projects/kinematic-refinement/

Motion retargeting aims to transfer a source motion to target characters with different skeletal structures, proportions, and body shapes. Although recent neural retargeting methods have improved flexibility across diverse skeletons, target-side geometric artifacts such as self-penetration remain difficult to resolve. Specifically, existing geometry-aware approaches often rely on fixed skeleton templates or implicit geometry-conditioned prediction, requiring a single network to account for target geometry deformation, detect target-side artifacts, and predict the corresponding correction from target geometry alone, which limits their ability to generalize across diverse skeleton structures and body shapes. In this paper, we present a geometry-aware motion retargeting framework that explicitly connects artifacts observed in the posed character geometry to motion refinement while preserving the flexibility of skeleton-agnostic neural retargeting. Our method first learns a motion embedding shared across different skeletons using a transformer-based retargeting autoencoder that transfers motion across arbitrary source--target skeleton pairs. Building on this kinematic motion prior, we introduce an artifact-driven refinement module that observes self-penetration on the posed target mesh and converts it into a corrective cue through a motion-to-vertex Jacobian. We further condition motion decoding on target geometry using skinning weight-based joint-aligned geometry features derived from the rest pose mesh. This design combines explicit target-side artifact reasoning with flexible geometry-aware decoding in a unified framework. Experiments on both fixed and arbitrary skeleton structure settings show that our method improves kinematic retargeting accuracy and reduces geometric artifacts, producing plausible motions across seen and unseen target characters.

0.70

Dynamic Skinning: Kinematics-Driven Cartoon Effects for Articulated Characters

cs.GR ·2026-10-29 ·Damien Rohmer, Karim Salem, Niranjan Kalyanasundaram, Victor Zordan
publishedcode/data similarity 0.60
Abstract · 10 pages, 9 figures. Author's accepted version of the article published in IEEE Transactions on Visualization and Computer Graphics (TVCG), …

We present an extension to traditional rig skinning, like Linear Blend Skinning (LBS), to produce secondary motions that exhibit the appearance of physical phenomena without need for simulation. At the core of the technique, we call dynamic skinning, is a set of deformers which offset position of individual vertices as a function of position derivatives and time. Examples of such deformers create effects such as oscillation in response to movement and the appearance of wave propagation, among others. Because the technique computes offsets directly and does not solve physics equations, it is extremely fast to compute. It also boasts a high degree of customizability which supports a desirable artist workflow and fine level of control. Finally, we showcase the technique in a number of scenarios and make comparisons with the state of the art.

0.46

Refine Where It Matters: Contact-Adaptive Meshing for Deformable Object Manipulation

cs.RO ·2026-10-09 ·Gabriel Johnson, Tom Olesch, Fei Liu
hot direction similarity 0.60
Abstract

Deformable-object manipulation requires accurate modeling of highly localized contact while maintaining simulation speeds suitable for interactive use. Uniformly fine tetrahedral meshes can resolve these interactions, but they introduce unnecessary degrees of freedom throughout the object. Coarse meshes are more efficient, yet they may under-resolve contact-induced deformation. We present a contact-adaptive mesh refinement framework that introduces spatial resolution only where it is most useful. The method uses geometric, elastic, and contact quantities already available from the deformable-body solver to score candidate edges. A fully GPU-parallel procedure then selects a conflict-free subset and updates both mesh topology and physical state directly within the simulation loop. We evaluate the approach on real deformable-object manipulation sequences. Adaptive refinement reduces simulation-to-real error, improves agreement with a fine-mesh reference, and remains substantially more efficient than uniformly fine simulation. These results show that local refinement can improve physical fidelity without incurring the cost of a globally fine discretization. The framework provides a practical basis for contact-rich simulation in interactive manipulation, sim-to-real modeling, and online physical digital twins.

0.24

Explicit Frictional Contact Modeling in Neural Garment Simulation

cs.CV cs.GRcs.LG ·2026-10-24 ·Thanh-Nguyen Truong, Vu-Hoang Tran, Ching-Chun Huang
published similarity 0.59
Abstract · WACV 2027

Graph neural networks (GNNs) simulate garments efficiently through physics-based self-supervision, but leave body-garment friction implicit or inside training energies, with no friction coefficient $μ$ to set at inference; retraining the tested GNNs with a coefficient-specific friction term barely responds to $μ$. Optimization-based solvers decide each contact's stick-slip state from the reaction that governs it, but only by re-optimizing the garment state at every step; a friction term in a one-pass training objective acts as a fixed-weight penalty on sliding, and the trained weights apply no per-contact Coulomb condition at inference. We therefore resolve friction explicitly after prediction: a Modular Contact Operator, attached to a frozen predictor without retraining or an iterative solve, estimates the normal load, applies a closed-form Coulomb correction along a path across body triangles, and propagates the induced motion through the cloth as a linearized membrane wave. On HOOD and ContourCraft, it raises sticking and lowers slip monotonically in $μ$, tracking a reference solver's response while coefficient-specific retraining stays flat, with low penetration and reference-consistent stretching at an eighth of the solver's runtime.

0.28

DiffGIPC: Differentiable Mixed-Coordinate Contact Mechanics on GPU

cs.GR cs.ROeess.SY ·2026-10-13 ·Kemeng Huang, Bowen Ren, Xinyu Lu, Minchen Li, Taku komura
similarity 0.58
Abstract

Contact-rich inverse problems require efficient gradients and reliable enforcement of non-penetration. Existing differentiable methods provide fast simulation and rigid-deformable coupling, but contact treatments based on penalties or velocity-level constraints can permit penetration or positional drift. Incremental Potential Contact (IPC) maintains non-penetration through geometric barriers and {continuous collision detection (CCD)}. However, repeated forward and backward evaluations remain costly in full-space finite-element (FEM) implementations, particularly when nearly rigid components retain many vertex {degrees of freedom (DoFs)}. We present DiffGIPC, a GPU-accelerated differentiable IPC framework for optimizing interacting deformable and nearly rigid bodies. Our affine-body derivatives enable {rest-shape} design, initial-state optimization, and articulated control while retaining only twelve motion DoFs per affine body. These gradients account for how changes in geometry, placement, and actuation affect other objects through collision and friction. We preserve these interactions in one coupled FEM-affine adjoint system per frame, reducing the backward-system size without discarding the dependencies that drive the inverse problem. GPU-optimized backward computation further reduces the cost of repeated gradient evaluations. A reusable PyTorch interface connects supported physical parameters to user-defined parameter maps and losses across design, identification, motion, placement, and articulated control. Experiments demonstrate peak speedups over DiffIPC of approximately 150.0x with full-space FEM and 4133.3x with affine bodies for combined forward simulation and backward differentiation.

0.30

TailorRig: Controllable and Structured Auxiliary Skeleton Generation for Garment-Aware Rigging

cs.CV ·2026-11-02 ·Yajing Chen, Xin Chen, Saidan Lu, Yeqi Yuan, Weikai Chen +3 more
top venuecode/data similarity 0.58
Abstract · Accepted to SIGGRAPH Asia 2026 Conference Papers

Humanoid rigging for modern characters with complex garments remains challenging due to the need for dense auxiliary skeletons and precise skinning control. Existing automatic methods primarily recover rigs from geometry, providing limited artist control over auxiliary articulation and often lacking explicit semantic or kinematic-chain structure for dense garment bones, leading to instability and weight bleeding. We present TailorRig, a framework that reformulates garment-aware humanoid rigging as a structured, controllable full-rig generation problem. This formulation shifts the goal from automatic rig recovery to artist-driven rig authoring, where both body-template compatibility and auxiliary articulation are explicit design choices. TailorRig exposes two explicit axes of artist control within a unified framework: a user-specified body skeleton template that preserves body-rig compatibility, and artist-provided semantic labels that drive an autoregressive generator to synthesize requested category-specific auxiliary bone chains. To robustly assign skinning weights under dense skeletal configurations, we further introduce a hierarchical chain-to-bone formulation: vertices are first associated to a kinematic chain, and bone weights are then refined within that chain, reducing weight bleeding between spatially adjacent but semantically unrelated structures. We evaluate TailorRig on a diverse set of characters and introduce Human-Mix, a large-scale dataset of over 38,000 humanoid models curated for garment-aware rigging. Experiments show that TailorRig improves skeleton accuracy, deformation stability, controllability, and practical usability over existing methods. Project page: https://xxxx0601.github.io/trig/ ; code: https://github.com/Tencent/TailorRig ; dataset: https://huggingface.co/datasets/tencent/TailorRig

0.57

Pose-based Neural Clothing for Animated Characters

cs.GR cs.CV ·2026-11-13 ·Julian N. Heidenreich, Vinicius C. Azevedo, Jakob Buhmann, Lento Manickathan, Arnold Moon +3 more
published similarity 0.58
Abstract · 19 pages, 18 figures, 5 tables. Includes appendix. Accepted to the ACM SIGGRAPH / Eurographics Symposium on Computer Animation (SCA 2026); t…

Traditional garment simulation for animated characters is a time-consuming bottleneck for artists due to slow simulations and tedious parameter tunings.Recent data-driven methods offer a powerful alternative, capable of learning from a dataset of simulated data to generate high-quality deformations. A lightweight network design allows data-driven systems to achieve a real-time inference speed. This significantly improves the artist workflow, as they can interactively pose a character and see high-quality folds and wrinkles at animation time, thereby allowing to make creative decisions ahead of time. However, existing neural clothing methods have presented appealing results on datasets based on realistic human models (\eg SMPL), but when trained on animated character datasets, they struggle to generalize to unseen poses. In this paper, we aim at designing neural networks and training strategies to generalize better to unseen poses in real-time to enable the interactive posing applications. We focus on a production-oriented setting where the model is trained for a single garment in a quasi-static setup. Technically, we leverage a smooth, expressive latent space by first training a Variational Auto-Encoder (VAE). We then progressively train the VAE encoder to transition from reconstruction to pose-driven prediction. To guide this prediction, we condition the network on both low-dimensional pose parameters and character body surface displacements. Finally, we introduce a novel local gradient histogram loss that mitigates the over-smoothing effect of reconstruction losses. Extensive evaluations on production-level assets and public datasets demonstrate that our method produces sharp, realistic wrinkles, smooth large-scale drape, and temporal coherence in real-time, offering a robust and easily integrable solution for interactive posing workflows.

0.17