CS Paper Radar

ReContact: Reconstruct and Retarget Human Contacts from Video for Contact-Rich Humanoid Manipulation

Zhongkai Gu, Yang Liu, Wei Zhu, Mitsuhiro Hayashibe

cs.RO ·submitted 2026-11-02 11:36 UTC · v1

Abstract

Contact transitions allow humanoid robots to redistribute object support across the whole body, enabling manipulation beyond hand-only grasps. Human videos provide a scalable source of such transitions for robots to learn from. However, body occlusion disrupts object pose tracking and corrupts retargeted motion. Moreover, accurately reproducing the object trajectory does not ensure that the robot applies stabilizing forces at the intended contacts, risking slips or drops in later phases. To address these challenges, we propose ReContact, which reconstructs and retargets human-object interactions through an object-centric contact plan. The plan specifies contact phases, contact pairs, anchors, pressing directions, and sticking or sliding modes. Contact priors stabilize object pose reconstruction through occlusion. A residual policy over a frozen whole-body tracker is rewarded for making contact at planned anchors with forces aligned to the specified directions. In simulation, on a thigh-supported regrasp task, ReContact achieves the planned two-palm bottom hold in 83.5 of episodes over three training seeds, versus 0.16% for the best adapted baseline. One policy trained on 247 references re-solved for new placements raises in-workspace tube-transfer success from 20.4% (source reference only) to 97.8%. On a real Unitree G1, policies execute seven contact-rich manipulation and two loco-manipulation tasks.

Closest papers

Nearest neighbours by meaning across the whole index.

VICAR: Video Imitation with Contact-Aware Retargeting for Humanoid Interactive Skills

cs.RO ·2026-10-09 ·Dvij Kalaria, Bike Zhang, S. Shankar Sastry
similarity 0.77
Abstract

Third-person human videos offer a scalable alternative to task-specific reward engineering, teleoperation, and manually scripted demonstrations for humanoid loco-manipulation. Recent video-to-humanoid systems have shown that noisy human motion, object trajectories, and contacts can be extracted from unstructured videos and refined into deployable skills. However, a key gap remains for contact-rich imitation: the task is often defined by world-frame contacts whose poses, timing, and speed must survive embodiment mismatch and runtime scene changes. Towards this, we present VICAR (Video Imitation with Contact-Aware Retargeting), a pipeline for learning humanoid interactive skills from third-person human videos. The system first recovers human motion, reconstructs task-relevant obstacles from monocular video, and then retargets the motion to a humanoid while preserving global contact poses, motion speed, and collision clearance. Unlike retargeting methods that only remove penetration or preserve local interaction geometry, our formulation represents user-specified contact poses and collision clearance as high-priority Lagrangian penalty terms and optimizes the full motion to remain smooth through contact-rich transitions. The resulting motions are used to train a contact-conditioned motion generator whose inputs include movable contact points enabling runtime adaptation to new contact positions. We demonstrate the framework on ten diverse third-person video skills, including six table-tennis serves, three object-pickup tasks, and ladder climbing, and deploy the learned skills on hardware. These results suggest that contact-preserving retargeting is a practical step toward humanoids that learn useful interactive behavior by watching humans.

0.38

Motion Retargeting with Spatiotemporal Preferences for Humanoid Loco-Manipulation

cs.RO ·2026-10-21 ·Xiongbo Shi, Shihang Du, Zongyou Yu, Ziyu Lin, Ao Zhou +4 more
similarity 0.77
Abstract

Human motion retargeting bridges the embodiment gap between humans and humanoid robots by converting human demonstrations into reference trajectories for whole-body control and loco-manipulation. For object-interaction tasks, successful execution depends on accurately preserving body--object relations at critical stages. However, uniform per-frame iteration budgets do not account for these localized accuracy requirements, limiting the computational efficiency of retargeting. To address this limitation, we present Spatiotemporal Retargeting (STR), which uses keyframes and key body parts to allocate optimization effort. Specifically, a vision-language model selects relevant motion signals and body parts, and keyframes are identified from changes in the selected signals. Based on these selections, STR assigns additional solver iterations to keyframes and higher interaction weights to the selected parts. To further improve contact fidelity, we introduce Mechanics-Aware Contact Anchoring (MCA) to refine object-surface contact positions using an approximate object-wrench model while retaining the selected surface directions. Building on the resulting references, we develop Spatiotemporal Reinforcement Learning (STRL), which combines adaptive key-stage sampling with a contact-position reward based on target proximity for downstream control. Simulation experiments on a Unitree G1 and real-world experiments on a Unitree R1 demonstrate that STR improves geometric contact coverage and continuity at lower computational cost, while the resulting references improve downstream task completion across diverse object-interaction motions.

0.17

HOI-Retarget: Contact-Centric Retargeting for Human-Object Interaction

cs.RO ·2026-09-28 ·Jihwan Shin, Adrià López Escoriza, Junzhe He, Matthias Heyrman, Marco Hutter
similarity 0.76
Abstract · 8 pages, 6 figures. Submitted to ICRA. Website: http://shinben0327.github.io/hoi-retarget

Learning from demonstration (LfD) has enabled humanoid robots to acquire diverse whole-body skills, but extending this paradigm to human-object interaction (HOI) is limited by the availability of robot-compatible interaction references. We present HOI-Retarget, a contact-centric retargeting method that transfers HOI onto a humanoid robot for large-scale motion-data generation. Its windowed trajectory optimization uses every labeled contact as a target in the object frame, balancing body tracking, foot support and smoothness under the robot's kinematic limits. The method can augment a single demonstration across object sizes, absorb contacts reconstructed from monocular video, and extend to several robots manipulating one object. We publicly release the code and the retargeted motion dataset.

0.50

CoCarry: Contact-Support-Structured Retargeting for Dual-Humanoid Cooperative Carrying

cs.RO ·2026-10-23 ·Ziyu Lin, Shihang Du, Tianhang Wang, Xiaodong Liu, Runze Zhang +4 more
dataset similarity 0.76
Abstract · 8 pages, 6 figures, 2 tables

Recent advances in large-scale human motion data, motion retargeting, and motion imitation have enabled increasingly capable whole-body control for individual humanoids. Cooperative carrying is more challenging because successful coordination requires not only plausible individual motions, but also consistent cross-agent and agent-object relations, including shared grasp, relative configuration, and whole-body support. We introduce CoCarry, a cooperative-carrying dataset containing 220 synchronized two-person sequences across 21 task schemes, five shared-object geometries, four terrain types, and approximately 61 minutes of motion. We further propose Contact-Support-Structured Retargeting, which starts from nominal individual motions and jointly refines both humanoids around the same prescribed object trajectory. Cooperation-aware object-local hand anchors preserve compatible four-hand grasp relations, while complementary upper object-interaction and lower support structures retain object-relative geometry and coordinated support. Across all 220 CoCarry sequences retargeted to two A3 humanoids, our method achieves 0.9995 contact preservation, reduces penetration duration by 67.0% and 71.0% relative to GMR and OmniRetarget, respectively, and maintains a 100% retargeting success rate. On CORE4D with Unitree G1 humanoids, it achieves 0.9906 contact preservation with zero measured sliding. We further validate the generated references through physics simulation and multiple real-world cooperative carrying experiments on two physical A3 humanoids, demonstrating their usability for downstream dual-humanoid control.

0.21

CARD: Contact-Anchored Retargeting for Dexterous Manipulation

cs.RO ·2026-10-27 ·Cunxi Dai, Botao He, Francois R Hogan, Wei Pan, Rao Fu +5 more
similarity 0.74
Abstract · Project webpage: https://card-retargeting.github.io/

Humans are dexterous, but traditional data collection paradigms such as teleoperation, kinesthetic teaching, and wearable exoskeletons force humans to act through the robot embodiment, bottlenecking their dexterity. Retargeting can avoid this. However, existing methods purely translate kinematics and ignore the real-world contact dynamics essential for task success. We present CARD: Contact-Anchored Retargeting for Dexterous Manipulation, a simulator and object-free framework that retargets human demonstrations to robot actions by explicitly preserving contact force targets. CARD unifies human data sources including video, motion capture, and tactile gloves via a shared hand--contact representation and generates explicit contact force targets in addition to kinematics. To maintain these contact targets during hardware open-loop replay, CARD also introduces a tactile tracking controller. For video which does not contain an explicit tactile source, we present Vid-HACO, our video-to-contact model that sets a new state of the art. Across our video, glove, motion-capture data and the GRAB dataset, CARD maintains contact on $43$--$78\%$ of contact frames, while kinematic and object-aware retargeting methods maintain contact on $<10\%$ and $22.5\%$ of the frames respectively. Further, integrating our formulation into physics-based retargeting improves strict task success from 12\% to 32\% on GRAB dataset. Finally, we show that our tactile tracker is critical to reproduce demonstrated forces during hardware replay. These results establish that contact preservation via CARD is a scalable interface for transferring human dexterity to robots.

0.39

Touch2Robot: Robot Touch in the Human Demonstration Loop

cs.RO cs.AI ·2026-09-21 ·Shengcheng Luo, Xiaoyang Cheng, Hong Ying, Xiaoying Zhou, Jiaming Jiang +4 more
similarity 0.73
Abstract · 12 pages, 13 figures

Human demonstrations offer a scalable way to collect manipulation data, but their contacts may be unstable or infeasible when transferred to a robot hand. Collecting demonstrations directly on the target robot avoids this mismatch but substantially increases the cost of data collection. To address this trade-off, we present Touch2Robot, a framework that lets humans collect demonstrations while seeing how the target robot hand would contact the object. We capture human hand motion, tactile-glove measurements, and object motion during human manipulation. These recordings guide object-specific RL policies to reproduce the demonstrated object motion while favoring contacts consistent with the recorded human touch. We distill the learned behaviors into a unified real-time retargeter that maps incoming human observations and object geometry to robot hand configurations. During collection, the predicted robot configuration is synchronized with the tracked object pose in simulation to reconstruct robot-object contacts, which are visualized to help the demonstrator adapt subsequent interactions to the target hand. Across four real-world tasks, Touch2Robot improves average real-robot replay completion from 37.9% to 72.1% over visual-only feedback, while reducing the collection time per replay-successful demonstration from 58.6s to 18.2s. Reconstructed target-hand contacts achieve 44.2% F1 against real-robot tactile measurements, and policies trained on Touch2Robot demonstrations improve downstream Diffusion Policy performance by 29.1 percentage points over visual-only feedback. These results show that bringing robot touch into the human demonstration loop improves both the quality and efficiency of scalable dexterous data collection. Project webpage: https://Touch2Robot.github.io/.

0.53

OTRetarget: Joint Robot and Object Motion Retargeting via Optimal Transport

cs.RO ·2026-09-29 ·Guillaume Besset, Erwann Carn, Timothée Carecchio, Valentin Tordjman-Levavasseur, Fabian Schramm +3 more
similarity 0.73
Abstract · 9 pages

Transferring human motion to humanoid robots requires adapting the demonstrated motion to the robot morphology while preserving interactions with the environment. This is particularly challenging for loco-manipulation tasks, where contacts with the ground and manipulated objects must remain consistent despite differences in body proportions. Yet, skeletal motion alone does not fully describe these interactions, and fixing object trajectories limits the adaptation to a new embodiment. In this paper, we introduce OTR ETARGET, a unified approach to jointly retarget robot and multi-object motion from human demonstrations. Our approach represents surface interactions through signed distances, closest surface points, and relative directions, and uses entropic optimal transport to transfer these quantities across human, robot, and object geometries. We incorporate the resulting interaction targets into a constrained inverse kinematics formulation that balances contact preservation with motion style and jointly optimizes robot and object poses at each frame. This formulation accommodates robot-object and object-object interactions without rescaling the scene or the demonstration. We validate the proposed approach on OMOMO, where it achieves a robot- object interaction Jaccard score of 87% and a depth error of 8.7 mm, compared with 28% and 29.3 mm for OmniRetarget. Finally, we demonstrate transfer to a physical G1 humanoid using whole-body policies trained with reinforcement learning on the retargeted references, across motions including two-handed box pick-and-place onto a table.

0.41

ReForce: Learning Force-aware Retargeting for Dexterous Manipulation

cs.RO ·2026-08-16 ·Yuhang Wu, Lingqi Zeng, Changwei Jing, Jianglong Ye, Xiaolong Wang
similarity 0.73
Abstract

Human demonstrations offer a scalable data source for dexterous manipulation, but transferring them to robot actions remains challenging due to the embodiment gap. Today's retargeting is mostly kinematic, yet manipulation is decided by force, which governs how the hand interacts with the object and how the object moves. In this paper, we present ReForce, a Force-aware Retargeting method that turns human motion and forces into robot actions that reproduce the intended contact. ReForce predicts a residual on the kinematically retargeted action to reach the desired force, using a general force tracker trained on large-scale simulation interactions. It supports both online force-aware teleoperation and offline data translation. In simulation and on real hardware, ReForce achieves lower force-tracking error and stronger multi-finger contact engagement on contact-rich tasks such as paper-cup grasping and tongs manipulation.

0.41