CS Paper Radar

Nonlinear homogenization of periodic unit cells composed of mixed continuum and structural elements with variationally consistent boundary-member reduction

Jonathan Stollberg, Dominik Schillinger

cs.CE ·submitted 2026-11-10 21:50 UTC · v1
code/data

Abstract

Periodic architected materials may be represented by representative volume elements (RVEs) combining continuum, truss, beam, and shell constituents. Their mixed translational and rotational kinematics complicate a consistent scale transition to a macroscale Cauchy continuum. We establish a nonlinear first-order computational homogenization framework for such mixed-dimensional RVEs. An auxiliary finite-strain Cosserat continuum serves solely as a power-equivalent carrier of their virtual power and generalized boundary kinematics. Its uniform rotation is identified with the macroscopic polar rotation and its wryness vanishes, so the effective medium remains of Cauchy type. Under periodic translational and rotational constraints, the Hill-Mandel condition yields a common nodal-force virial for the effective first Piola-Kirchhoff stress, independent of element type. For lower-dimensional members on periodically identified cell boundaries, fractional ownership of internal virtual work is shown to be variationally equivalent to a topology-preserving reduction retaining one representative of each set of periodic element copies. Because this equivalence covers the complete element virtual work and consistent linearization, it applies to geometrically and materially nonlinear and path-dependent constituents without rescaling section properties, constitutive parameters, or internal variables. Numerical examples recover the analytical small-strain response and cubic symmetry of a mixed continuum-shell-beam cell, verify the reduction and discrete power balance, and demonstrate finite-rotation buckling of a hyperelastic Octet lattice and history-dependent yield-surface evolution of an elastoplastic sandwich cell. The open-source implementation abqhom couples the framework to Abaqus.

Closest papers

Nearest neighbours by meaning across the whole index.

An FE2 model for shear-deformable beams considering periodic lattice-like truss mesostructures

cs.CE ·2026-10-06 ·Julian Ochs, Jens Wackerfuß
similarity 0.58
Abstract · 37 pages, 21 figures, 10 tables, 66 references

The increasing use of lattice-like architectures in load-bearing members, facilitated by advances in additive manufacturing, calls for efficient multiscale approaches to their structural analysis. For slender lattice-like structures, beam models provide a computationally efficient macroscopic representation while retaining the ability to account for the underlying lattice architecture through an homogenization approach. Although finite element squared (FE2) approaches combining beam models at the macroscopic scale with continuum models at the microscopic scale have been established, an FE2 framework combining a beam-based macroscopic model with a truss-based microscopic model of a lattice structure has not yet been reported. To address this gap, an FE2 framework is developed for three-dimensional shear-deformable beams with periodically repeated lattice-like microstructures and periodic displacement boundary conditions. The proposed FE2 framework introduces constraint equations that (a) prevent rigid-body translations and rotations of the representative volume element (RVE) without imposing additional kinematic restrictions and (b) ensure that the homogenized stress resultants and material matrix are independent of the selected RVE length. To mitigate artificial boundary effects arising at the boundaries of the lattice-like RVE, local correction factors are introduced. The framework is assessed through numerical studies of two- and three-dimensional lattice-like structures with different geometries, considering both geometric and material linearity and nonlinearity. The results demonstrate the independence of the homogenized stress resultants and material matrix from the selected RVE length and show good agreement with the corresponding reference models in all investigated cases.

0.28

Reduced order modeling for micromorphic computational homogenization of mechanical metamaterials with patterning fluctuation fields

cs.CE ·2026-09-29 ·Theron Guo, Ondřej Rokoš
similarity 0.57
Abstract

Mechanical metamaterials owe some of their exotic effective properties to microstructural instabilities such as buckling and pattern transformation. Their fine-scale geometry, combined with the interplay of local and nonlocal effects, renders direct numerical simulation (DNS) prohibitively expensive, if not intractable. Micromorphic computational homogenization~\citep{Rokos2019} has been proposed to make macroscopic simulations feasible: a representative volume element (RVE) carrying patterning fluctuation fields resolves the microscale, while an effective micromorphic continuum describes the macroscale. Such simulations nevertheless remain costly, since the RVE problem and its associated tangent problems must be solved at every macroscopic integration point, which becomes prohibitive, especially in three dimensions. We therefore propose a reduced order model for the microscopic problem, combining proper orthogonal decomposition with a hyperreduction method tailored to the micromorphic setting. Two numerical examples quantify the reduced basis and hyperreduction errors and discuss the offline costs and attainable online speed-ups. The results show that this approach can enable engineering-scale large deformation analysis of mechanical metamaterials.

0.27

Scaled boundary finite elements for FFT-based computational micromechanics

cs.CE math.NA ·2026-11-16 ·Flavia Gehrig, Carolin Birk, Matti Schneider
similarity 0.54
Abstract · 32 pages, 7 figures. Submitted to International Journal of Numerical Methods in Engineering

We introduce a matrix-free FFT-based solver for three-dimensional linear elastic homogenization problems discretized by the scaled boundary finite element method (SBFEM) on a voxel grid. Owing to its analytical solution in the radial direction, the SBFEM discretization is inherently softer than fully integrated voxel finite elements, whereas its displacement-based formulation remains symmetric, conforming, and supports arbitrary stiffness anisotropy. These properties make SBFEM an attractive candidate for porous and highly heterogeneous microstructures, where existing voxel-based FFT discretizations offer no generally reliable choice: Reduced-integration hexahedral elements, equivalently the rotated staggered grid discretization, may suffer from hourglass instabilities in the presence of voids, whereas fully integrated hexahedral elements are often too stiff. The proposed discretization uses hexahedral SBFEM cells on the full voxel mesh of a regular periodic grid, retaining the simplicity of a fixed-resolution voxel representation without requiring adaptive mesh coarsening. The main contribution is a preconditioner based on the homogeneous SBFEM stiffness operator. We show that this preconditioner may be applied locally in Fourier space and that the condition number of the preconditioned system is bounded by the material contrast, independently of the grid resolution. This result enables a fully matrix-free implementation of the SBFEM-discretized problem, without assembling or storing the global stiffness matrix. Numerical experiments on a short-fibre reinforced composite, a polyurethane foam and a sand-based binder jet microstructure demonstrate robust convergence and competitive accuracy compared with established voxel discretizations. In particular, SBFEM remains stable for porous microstructures, for which reduced-integration hexahedral elements become unstable.

0.39

Concurrent two-scale topology optimization of printable bone scaffolds via rectified-flow generation and exact latent-space refinement

cs.LG physics.comp-ph ·2026-10-18 ·Reza T Batley, Sourav Saha
benchmarkunusual similarity 0.52
Abstract

Bone scaffolds must reconcile a macroscale mechanical response with microscale geometric feasibility, yet conventional approaches to their design restrict attainable constitutive properties. This work presents a concurrent two-scale topology optimization framework; a conditional rectified flow generates periodic lattice microstructures, which are then refined in latent space by exact finite-element homogenization sensitivities. The resulting unit-cell geometries and their spatial assignments are jointly optimized under mechanical and feature-size constraints. In a distal rabbit femur benchmark, all eight flow-started refinements produce printable cells with maximum relative errors under 1\% across six prescribed engineering moduli. Constructing the implant from a single tiled cell reproduces intact whole-femur compliance within 0.1\% and regional strain energy within 0.35\% under four loading conditions. In human femoral reconstruction, multiscale concurrent optimization produces a cortical mid-shaft scaffold with porosity 63\% while satisfying the compliance constraint within 2\% under walking and stair-climbing loads. It achieves an 84\% porosity on a proximal cancellous scaffold with strain-energy deviations below 0.25\% under the same loads. Analysis of the learned representations reveals distinct architectural families in latent space. Further, the attention heads of the rectified-flow transformer specialize for spatial shifts -- learning the analogue of a finite-difference stencil -- and coordinate symmetries, with ablations showing their influence on generated topologies. These results establish a route to printable, mechanically constrained scaffold designs. The framework is general enough for extending to many other multiscale structural design applications including topology-microstructure co-design in metal additive manufacturing.

0.22

Operator Learning of Microstructure-Dependent Internal-Variable Models for Inelastic Homogenization: Approximation and Complexity

cs.LG math.NAcond-mat.mtrl-scimath.DS ·2026-11-09 ·Lianghao Cao, George Stepaniants, Andrew M. Stuart
theory similarity 0.52
Abstract · 52 pages, 12 figures, including appendices

We study the learning of homogenized constitutive laws for inelastic heterogeneous materials, aiming to replace costly concurrent unit-cell simulations with surrogates that generalize across loading histories and microstructures. We focus on the recurrent neural operator framework, motivated by the explicit form of homogenized Kelvin--Voigt linear viscoelasticity. In this framework, internal variables enable a Markovian approximation of loading-history dependence, and neural operators represent the microstructure-dependent constitutive response. For periodic Kelvin--Voigt viscoelasticity, we prove a universal approximation theorem showing that the model can approximate the homogenized constitutive law to any prescribed accuracy, uniformly in time and over a wide set of admissible strain trajectories and microstructural property fields, in two and three dimensions. This comprises a significant extension of the existing, somewhat limited, one-dimensional theory that uses explicit solutions for piecewise constant materials. Instead, in two and three dimensions, we adopt a more versatile approximation based on the spectral representation of the memory kernel that arises from homogenization. This also enables us to give an explicit bound on the internal-variable dimension, sufficient for approximation, exhibiting logarithmic growth in the inverse relative stress error and in material contrast. Numerical experiments on viscoelasticity and crystal plasticity complement the theory, illustrating the roles of internal-variable dimension and sample complexity in learning homogenized responses from unit-cell data. Theoretical results are formally verified in Lean 4.

0.38

Machine-learning-assisted multiscale topology optimization of functionally graded superimposed lattice structures

cs.CE ·2026-08-28 ·Prashant Kumar Gupta, Jonathan Stollberg, Dominik Schillinger, Mohammad Ashraf Iqbal
benchmark similarity 0.51
Abstract

Functionally graded lattice structures enable lightweight designs with spatially tunable stiffness and density, but their use in multiscale topology optimization is limited by the cost of repeated computational homogenization. This work presents a machine learning-assisted multiscale optimization framework for regular superimposed lattice structures. The unit cell is formed by combining body-centered cubic, face-centered cubic, and simple cubic lattice components, each controlled by an independent geometric parameter. Offline computational homogenization is used to generate effective stiffness data, which are then used to train a Cholesky-constrained neural network surrogate. This representation reconstructs the homogenized stiffness tensor in a physically admissible form. A separate neural network is trained to predict relative density from Monte Carlo-based density estimates. We incorporate our surrogates into a two-stage topology optimization strategy. First, a macroscale topology is obtained using the solid isotropic material with penalization (SIMP) method. The resulting solid region is then used for microscale lattice optimization, where the local lattice parameters are updated using the method of moving asymptotes (MMA). The trained stiffness and density surrogates replace repeated online homogenization during this stage. The method is demonstrated on a three-dimensional Messerschmitt-Bölkow-Blohm (MBB) beam benchmark, producing spatially varying lattice parameters and relative density fields consistent with compliance minimization under a material constraint.

0.27

Cosserat Modeling of Trimmed Helicoid Soft Arms with a Separated-Section Constitutive Law

cs.RO ·2026-09-21 ·Zhihang Qin, Linxin Hou, Zeyu Zhong, Yuchen Sun, Wenci Xin +8 more
similarity 0.50
Abstract

Cosserat rod models for soft robots usually construct sectional stiffness by summing material properties over a common cross-section. This assumption becomes inaccurate for trimmed helicoid arms, where load-bearing helix domains are separated and connected only through sparse fused crossings. This paper formulates a separated-section constitutive law that evaluates each helix domain in its local frame and pulls its constitutive response back to the backbone, yielding an effective backbone stiffness. Sparse-fusion mechanics captures the additional compliance caused by relative motion between neighboring domains and determines channel-wise reduction profiles $η_c(s/L)$ for bending, torsion, and extension. The resulting effective sectional stiffness is strongly anisotropic: bending and extension are reduced by about one order of magnitude, whereas torsion remains close to the effective backbone stiffness. The resulting sectional law is embedded in a geometrically exact dynamic Cosserat model with GVS discretization and routed-tendon actuation. Across 103 measured configurations, the three datasets give pooled normalized position errors of $7.7 \ \%$, $6.7 \ \%$, and $7.8 \ \%$, while each full-arm solve requires approximately $0.3 \ \mathrm{s}$ on one CPU core (Intel Xeon, Cascade Lake, $2.8 \mathrm{GHz}$), enabling rapid model-based planning, state and load estimation, and morphology--control co-design for architected soft robots.

0.38

Component-wise hyperreduction for nonlinear solid mechanics problems

cs.CE ·2026-08-19 ·Stephan Ritzert, Jannick Kehls, Erik Faust, Hagen Holthusen, Stefanie Reese +1 more
similarity 0.50
Abstract

Hyperreduced nonlinear solid-mechanics components can be generated offline and reused as transferable building blocks across different assemblies, boundary conditions, meshes, material parameters, and constitutive models. We use proper orthogonal decomposition (POD) and energy conserving sampling and weighting (ECSW) on the component level and connect the substructures by mortar mesh tying. The POD modes and the ECSW weights and elements are computed offline from simulations of single components and the finite rigid body motions are treated by 12 additional rigid body modes per substructure. The numerical examples demonstrate errors below 1 \% for large quasi-static assemblies while evaluating less than 10 \% of the elements. The same component bases and ECSW elements are successfully reused for finite-strain viscoelastic dynamics, although they were trained only on elastic Neo-Hookean component simulations. These results indicate that component-wise hyperreduction can provide reusable reduced building blocks for modular nonlinear solid-mechanics simulations.

0.51